iso 50001 ppt
TRANSCRIPT
Superior Energy Performance:A Roadmap for Achieving Continual Improvements in
Energy Performance
Paul Scheihing
NASEO Annual Meeting
September 30, 2010
What is Superior Energy Performance?
A market‐based, ANSI‐accredited facility certification program that provides industrial facilities with a roadmap for achieving continual improvement in energy efficiency while boosting competitiveness.
Goals:• Drive continual improvement in
energy intensity
• Develop a transparent systemto validate energy intensity improvements and management practices
• Encourage broad participation throughout industry
• Support and build the industrial efficiency market and workforce
Superior Energy Performance will be launched nationwide
in 2011.
• Foster a corporate culture of continuous improvement in energy efficiency
• Use ISO 50001 standard as foundational tool for energy management
• Establish a tiered program that provides an entry point for companies at all levels of experience with energy management
• Create a verified record of energy intensity/efficiency improvement.
• Potentially create value for corporate energy savings and carbon reductions in utility, state, regional, national, and international trading markets
Superior Energy Performance Strategy
U.S. Council for Energy‐Efficient Manufacturing
• Acts as champion of U.S. industry in pursuing national energy efficiency goals.
• Seeks to improve the energy intensity of U.S. manufacturing through a series of initiatives.
• Guides development of Superior Energy Performance.
Getting Superior Energy Performance Certified
An ANSI‐accredited Certification Body will conduct a third‐party audit to verify that the SEP requirements are met.
Superior Energy Performance Certification Requirements:
1. Energy Management System Conformance to ISO 50001 Energy Management Standard
2. Energy Performance Improvement
Potential impacts:• Could influence up to 60% of the world’s energy use across many economic sectors
Uptake of ISO 50001 will be driven by companies seeking an internationally recognized response to:• Corporate sustainability programs
• Energy cost reduction initiatives
• Demand created along the manufacturing supply chain
• Future national cap and trade programs; carbon or energy taxes; increasing market value of “green manufacturing” / reduced carbon footprint
• International climate agreements
ISO 50001 ‐ Energy Management Standard
ISO 50001 energy management standard will establish a framework for industrial and commercial facilities, and organizations to manage energy.
Status of ISO 50001• Under development by ISO Project Committee 242; United States and Brazil lead effort with United Kingdom and China
• Final Draft International Standard in Oct. 2010
• Ready for publication by mid 2011
ISO 50001 ‐ Energy Management Standard
• Requires an organization to establish, implement, maintain, and improve an energy management system, enabling systematicachievement of continual improvement in energy performance, energy efficiency, and energy conservation.
• Applies to all factors that can be monitored andinfluenced by the organization to affect energy use.
• Does not prescribe specific performance criteriawith respect to energy.
• Designed to be used independently, yet can be aligned or integrated with other management systems (e.g., ISO 9001 and ISO 14001). Applicable to all organizations that use energy.
Components of an Energy Management Standard
Typical features include:1. Energy policy: top management’s official statement of the
organization’s commitment to managing energy.2. Energy management plan that requires measurement,
management, and documentation for continuous improvement for energy efficiency.
3. Cross‐divisional management team led by a representative who reports directly to management and is responsible for overseeing the implementation of the strategic plan.
4. Operating controls and procedures to address all aspects of energy purchase, use, and disposal.
5. Establishing a baseline of the organization’s energy use. Progress will be measured against this deadline.
6. Identification of energy performance indicators that are unique to the company and are tracked to measure progress.
7. Energy objectives and targets for energy performance improvement at relevant functions, levels, processes or facilities within an organization.
8. Action plans to meet those targets and objectives.9. Creation of an Energy Manual, or a living document that evolves
over time as additional energy saving projects and policies are undertaken and documented.
10. Periodic reporting of progress to management based on these measurements.
Components of an Energy Management Standard
Benefits of Certification to Manufacturers
• Recognition
‒ Public: Recognized leader in sustainable use of energy resources (local and financial community)
‒ Supply chain: Customers grant preferred supplier status
• External financial incentives
‒ Energy efficiency credits (electric utility & others)
‒ Potential carbon credits (state, region, and national)
• Systematic framework for continuous improvement
‒ ISO 50001 energy management and ASME system assessment standards
‒ Tools and resources to assist implementation and validation of energy performance improvement
Superior Energy Performance certification provides third‐party verification that an industrial or commercial facility has reduced energy use and has a system in place to achieve continual improvement in energy efficiency into the future.
Benefits in the Industrial Energy Efficiency Market
Supply Chains • Provides a pro‐active turnkey program for major OEMs and retailers to request their suppliers to meet the program requirements
ESCOs • Builds greater credibility with industrial & commercial customers and a stronger business case for providing third‐party energy efficiency services and off‐balance sheet capital investments
Utilities • Empowers a facility‐wide, systems‐oriented approach• Helps justify industrial or commercial energy efficiency program
investments, including permanent operational changes, to public utility commissions
Superior Energy Performance builds and supports the industrial and commercial energy efficiency markets:
Superior Energy Performance Program Design
PREPARE INDUSTRIAL AND COMMERCIAL FACILITIES FOR SUPERIOR ENERGY PERFORMANCE CERTIFICATIONCertified Practitioners
In Energy Management SystemsAssist facilities in conforming to ISO 50001
ISO 50001Facilities pursuing certification must conform to the international energy
management standard
Certified PractitionersIn System [type]
Assist facilities in assessing energy efficiency opportunities
System Assessment StandardsUse of these standards can helpfacilities meet required energyperformance improvement
Energy Management ToolkitDOE tool suite to help industrial and commercial facility staff implement an energy management
system based on ISO 50001
End‐User TrainingFour‐part webinar training series on
implementation of an energy management system and Superior Energy Performance
VERIFY APPLICANTS PURSUING SUPERIOR ENERGY PERFORMANCE CERTIFICATION
Certified PractitionersSEP Validation Specialists
Perform third‐party audit in facilities applying to become Certified Partners;
use M&V Protocol
Measurement & Verification (M&V) Protocol
Methodology to verify energy performance improvement and conformance
to ISO 50001
Certification BodiesPerform third‐party audit for facilities applying to become Certified Partners,
use M&V Protocol
U.S. CEEMOversee SEP Program Administrator
and provide program guidance
SEP Program AdministratorManage and operate program, process applications, assign auditors, issue certificates, and communicate
with organizations involved
To earn Superior Energy Performance certification, applicants must:• Conform to ISO 50001• Demonstrate energy performance improvement
Industrial and Commercial FacilitiesApply through SEP Program
Administrator
Superior Energy Performance Program Design
Superior Energy Performance Program Design
The program accommodates:• Maturity of company’s/facility’s energy management program
• Level of external validation desired
• Business climate/cycle
Two Program Tiers:
PartnerSelf‐declaration
Certified PartnerANSI‐accredited certification
Industrial Facility Performance Levels Criteria
Performance Characteristics Silver Gold Platinum
EI Pathw
ay
Energy Intensity Improvement
Meets 5% energy intensity improvement threshold over the last 3 years.
Meets 10% energy intensity improvement threshold over the last 3 years.
Meets 15% energy intensity improvement threshold over the last 3 years.
Mature En
ergy Pathw
ay
Energy Intensity Improvement
Demonstrates an energy intensity improvement of 15% or more over the last 10years.
Demonstrates an energy intensity improvement of 15% or more over the last 10years.
Demonstrates an energy intensity improvement of 15% or more over the last 10years.
Score on Best Practices Scorecard
Includes credits for energy management best practices and energy performance beyond the 15% EI improvement over the last 10 years.
Meets a score of at least35 and up to 60 out of 100 total points for Best Practices Scorecard
Minimum of 25 points required for the energy management best practices.
Meets a score of at least 61 and up to 80 out of 100 total points for Best Practices Scorecard
Minimum of 25 points required for the energy management best practices and 10 for energy performance.
Meets a score of at least 81 out of 100 total points for Best Practices Scorecard
Minimum of 25 points required for the energy management best practices and 10 for energy performance.
Partner Plants that self‐declare results are not eligible for silver, gold, or platinum designation
Appropriate application of the energy management standard, system assessment standards, and the M&V Protocol will require significant training and skill. Superior Energy Performance will help to build this workforce.
ANSI‐accredited professional certification programs are planned for three types of Certified Practitioners:
• Energy Management System Practitioner: Help facilities implement the ISO 50001 energy management standard
• System [Type] Practitioner: Perform compressed air, process heating, pumping, or steam system assessments using ASME system assessment standards to help facilities meet the SEP energy intensity improvement criteria
Certified Practitioners
Certified Practitioners in Energy Management Systems• First class in June 2011
• Sign up on Superior Energy Performance website
• SEP Validation Specialist: Perform third‐party audits to verify a facility’s conformance to the Superior Energy Performance requirements
http://www.superiorenergyperformance.net/certified_practitioners.html
Program Status and Moving Forward
Texas Superior Energy Performance “Alpha” Pilot Project, 2008‐2010
Since May 2008, DOE has worked with worked with the University of Texas at Austin to pilot the elements of Superior Energy Performance.
Goal: Verify the processes, standards, and performance criteria as:
• Practical and achievable
• Beneficial to participating plants
• Effective in identifying plants that meet the proposed program criteria
Texas pilot plants will be the first plants certified by Superior Energy Performance
• January ‐December 2010: Conduct audits using ANSI MSE and M&V Protocol
• This process will also establish the first ANSI‐accredited Certification Body for Superior Energy Performance: KEMA
First plants certified: Cook Composites & Polymers, Freescale Semiconductor, Owens Corning and Dow Chemical
Energy Management Demonstration Projects
Roll Out Dates• 2008: Texas
• 2009:Northwest region
• 2010: Southeast, Midwest, Mid‐Atlantic regions
• Fall 2010:Northeast region
• 2011: California, Colorado, Texas (round 2)
Energy Management Demonstration Goals:
• ProvideSave Energy Now LEADER Companies with a roadmap to achieve ambitious goals to reduce industrial energy intensity.
• Test the elements of Superior Energy Performance.
• Build energy management expertise at the regional, state, and plant level by showcasing lessons learned and best practices.
• Broaden energy savings throughout the nation.
DOE’s Industrial Technologies Program is conducting State/Regional Energy Management Demonstration Projects in support of Save Energy Now LEADER and Superior Energy Performance.
http://www1.eere.energy.gov/industry/energymanagementdemonstrations/
Demonstration Approach1. The state or region identifies an
appropriate demonstration plant based on provided guidelines
2. Three face‐to‐face trainings for the plant and consultants
3. Monthly training for the consultants (15‐month implementation schedule)
4. Consultants coach plant to implement energy management system in conformance with ISO 50001
5. Plant and consultants hold quarterly review with plant management and Energy Management Demo team lead
6. Plant applies for Superior Energy Performance as early as 18 months after initial training
Demonstration Approach
Participants• 3M• Amcor PET• Bridgestone Tire• Cook Composites & Polymers• Cooper Tire• Didion Milling, Inc• Dow Chemical• Eaton• Freescale Semiconductor• General Dynamics• Gray Harbor Paper• Haynes International• HNI / Allsteel• JR Simplot• Kenworth Trucks• Neenah Foundry Company• Nissan• Owens Corning• Schneider Electric• Spirax Sarco• Traco• Volvo• World Kitchen
Save Energy Now LEADER
• Voluntarily pledge to reduceenergy intensity by 25% or more over 10 years
• Make continuous improvements in energy efficiency and carbon reduction as part of a robust business strategy
• Gain enhanced access to enabling resources: tailored technical assistance, training, assessments, and more
• Receive high‐level recognition for participation and achievements
Reduced energy costs and carbon emissionsReduced energy costs and carbon emissions
Save Energy Now LEADER ProgramProvides resources to companies (usually multiple facilities) that pledge to reduce their energy intensity 25% in 10 years. Guidance and tools can also helpplants and companies gain ISOand SEP certification.
Tools
Assessments
Tech. Assist.
Recognition
Training
Industry Progression toward Higher Energy Performance
ISO 50001Components in place:• Baseline• Policy• Plan• Team/Leader
Improv
ed Ene
rgy Man
agem
ent
Superior Energy PerformanceSingle facility ISO 50001 conformance with validated energy performance improvement
ISO 50001
ISO 50001 is a foundational tool that any organization can use to manage energy.
Global Superior Energy Performance: GSEP
• Clean Energy Ministerial held on July 19‐20 in Washington, D.C. where 25 energy ministers from 20 countries and the European Commission participated.
• Clean Energy Ministerial provided a forum for like‐minded countries to take specific steps forward to promote clean energy technologies.
• Global Superior Energy Performance (GSEP) partnership launched amongst Canada, the European Commission, France, India, Japan, Korea, Mexico, Russia, South Africa, Sweden, and the United States.
• GSEP conceived as an international network of national government agencies, national‐level certification programs, and other public/private sector organizations that will catalyze continuous energy performance improvements in commercial buildings and industrial facilities of all performance levels.
• See www.cleanenergyministerial.org/gsep
GSEP: US supported pilot projects
• Industrial plant pilots :
o 3M Company; Canadao Dow Chemical, Brazilo Nissan, Japan
Commercial building pilots:
o Grubb and Elliso Marriotto Targeto Walmarto Cleveland Clinico MITo General Services Administration (GSA)
Superior Energy Performance,Major Milestones: 2009‐2013
• Nov. 2009:M&V protocol ready for pilot plant application
• Dec. 2009: Request applications from initial Texas plants
• Jan. 2010: First plant applies to SEP program
• March 2010:Hold state‐regional Energy Management demo workshop
• March 2010: Complete first plant on‐site audit and review of conformance to SEP program requirements
• Dec. 2010: Texas pilot plants certified through ANSI‐accredited Certifying Body
• Jan. 2011: Identify accredited professional certification body for Certified Practitioner in four system areas
• Feb. 2011: Select SEP Program Administrator by conducting DOE solicitation
• April 2011: Identify professional training organizations (PTOs) for certified energy management system practitioners
• June 2011: Identify PTOs for certified SEP validation specialists
• June 2011: Begin certified energy management system practitioner and SEP validation specialist training through PTOs
• June 2011: Identify PTOs for certified system assessment practitioners
• June 2011: ISO 50001 Energy Management Standard published; replaces ANSI standard
• Sept. 2011: Begin certified system assessment practitioner training in four system areas through PTOs
• Oct. 2011:National launch of Superior Energy Performance Program
• June 2013: SEP program self‐sustaining on program fees
Superior Energy Performance: www.superiorenergyperformance.net
Global Superior Energy Performance:www.cleanenergyministerial.org/GSEP/