All rights reserved.Reproduction, also by extracting and reproducing photos is only permitted with written authorization of mahe medical gmbh.

All offers, orders and deliveries are subject to mahe medical gmbh “General Sales and Delivery Terms”. We reserve the right to modify our range of products and their design as well as to deviate from the illustrations and data shown.

SET-011-0010-024 FUSION LOCK LARGE FRAGMENT BASIC INSTRUMENT SET, 5.0 MM SYSTEM FUSION

Ref. No. PRODUCT DESCRIPTION Pcs.TRAY-011-0010-024 TRAY-011-0010-024 Tray Fusion Lock Large Fragment

Basic instrument SET-011-0010-024 (Graphic case)1

005-0210-031 Drill bit - AO shaft ø 3.2 mm x length 145 mm / 120 mm 2

005-0210-044 Drill bit - AO shaft ø 4.5 mm x length 145 mm / 120 mm 2

005-0210-099 Countersink ø 4.5 mm with T-handle and tip 1

005-0211-046 Tap AO shaft ø 4.5 mm with cortical pitch 1.75 mm used for ø 4.5 mm cortical screws 1

005-0212-032 Insert drill sleeve ø 4.5 mm / ø 3.2 mm 1

005-0211-044 T-handle small with AO quick coupling 1

005-0212-026 Tap sleeve ø 3.2 mm, also use as ø 3.2 mm drill guide 1

005-0214-015 Large hex. screwdriver - AO shaft standard (hex. flats 3.5 mm) used for ø 4.5 mm / ø 6.5 mm screws

1

009-0368-035 Large hexagonal screwdriver used for self-holding sleeve Ref. No. 009-0390-062 1

009-0390-062 Coupling self-holding sleeve for screwdriver Ref. No. 009-0368-035 1

005-0212-045 Tap sleeve ø 4.5 mm 1

005-0219-006 Depth gauge large, extra long for measurement 120 mm used for ø 4.5 mm and ø 6.5 mm screws 1

102-0140-100 FUSION K-wire ø 2.0 mm x length 190 mm 10

102-0130-020 FUSION Drill bit AO shaft ø 4.3 mm x length 195 mm, calibrated used for 5.0 mm locking plate system 2

102-0140-020 FUSION Threaded drill guide ø 4.3 mm used for drill bit ø 4.3 mm Ref. No. 102-0130-020 2

102-0140-060 FUSION Centering sleeve ø 2.0 mm used for K-wire ø 2.0 mm x length 190 mm Ref. No. 102-0140-100 2

102-0140-080 FUSION Direct measuring device used for K-wire ø 2.0 mm x length 190 mm Ref. No.102-0140-100 1100-0150-025 Torque limited drive 2.5 mm with AO quick coupling 1

Ref. No. STERILIZATION CONTAINERC-110-135 1/1 Size container, bottom non perforated outside 580 x 280 x135 mm / inside 550 x 265 x 115 mm

SET-LISTING CONTENT FOR SET: SET-011-0010-024

TRAY-011-0010-024 Tray Fusion Lock Large Fragment Basic Instrument SET-011-0010-024 (Graphic case steel)

INDEX: SET-011-0010-024 SET-LISTING-CONTENT: INSTRUMENTS

RECOMMENDED STERILIZATION CONTAINER FOR SET-011-0010-024

2

3

INSTRUMENTS FOR FUSION LOCKING PLATE 5.0 MM SYSTEM

005-0210-031 Drill bit - AO shaft ø 3.2 mm x length 145 mm / 120 mm

005-0210-044 Drill bit - AO shaft ø 4.5 mm x length 145 mm / 120 mm

005-0210-099 Countersink ø 4.5 mm with T-handle and tip

005-0211-046 Tap AO shaft, 4.5 mm/125 mm with cortical pitch 1.75 mm used for ø 4.5 mm cortical screws

005-0212-032 Insert drill sleeve ø 4.5 mm / ø 3.2 mm

005-0210-096 Malleolar countersink ø 3.2 mm

4

009-0368-035 Large hexagonal screwdriver used for self-holding sleeve Ref. No. 009-0390-062

009-0390-062 Coupling self-holding sleeve for screwdriver Ref. No. 009-0368-035

005-0211-044 T-handle small with AO - quick coupling

005-0212-026 Tap sleeve ø 3.5 mm, for drill bit ø 3.2 mm

005-0214-015 Large hex. screwdriver - AO shaft standard (hex. flats 3.5 mm) used for ø 4.5 mm / ø 6.5 mm screws

INSTRUMENTS FOR FUSIONLOCKING PLATE 5.0 MM SYSTEM

5

INSTRUMENTS FOR FUSIONLOCKING PLATE 5.0 MM SYSTEM

005-0212-045 Tap sleeve ø 4.5 mm

005-0212-047 Pointed drill guide

005-0221-004 Drill sleeve for round hole plates ø 3.2 mm

005-0222-029 Drill guide for ø 6.5 mm / 3.2 mm used for 6.5 mm screws and ø 3.5 mm drill bit

001-0013-010 Screw forceps

6

5

INSTRUMENTS FOR FUSIONLOCKING PLATE 5.0 MM SYSTEM

005-0211-066 Tap - AO shaft ø 6.5 mm with cancellous pitch 2.75 mm

005-0219-006 Depth gauge large, extra long for measurement 120 mm used for ø 4.5 mm and ø 6.5 mm screws

102-0140-100 FUSION K-wire ø 2.0 mm x length 190 mm

102-0130-020 FUSION Drill bit AO shaft ø 4.3 mm x length 195 mm, calibrated used for 5.0 mm locking plate system

102-0140-020 FUSION Threaded drill guide ø 4.3 mm used for drill bit ø 4.3 mm Ref. No. 102-0130-020

102-0140-060 FUSION Centering sleeve ø 2.0 mm used for K-wire ø 2.0 mm x length 190 mm Ref. No. 102-0140-100

7

INSTRUMENTS FOR FUSIONLOCKING PLATE 5.0 MM SYSTEM

102-0140-080 FUSION Direct measuring device used for K-wire ø 2.0 mm x length 190 mm Ref. No. 102-0140-100

005-0219-039 Sharp hook, length 155 mm

100-0150-025 Torque limited driver 2.5 mm with AO quick coupling

005-0229-002 Large bending iron for standard plates 4/6 mm

8

INSTRUMENTS FOR FUSIONLOCKING PLATE 5.0 MM SYSTEM

005-0229-030 Plate bending press

005-0229-015 Bending pliers

HANDLING!

9

Ref. No. Diameter and complete length102-0030-014ST ø 5.0 mm x length 14 mm

102-0030-016ST ø 5.0 mm x length 16 mm

102-0030-018ST ø 5.0 mm x length 18 mm

102-0030-020ST ø 5.0 mm x length 20 mm

102-0030-022ST ø 5.0 mm x length 22 mm

102-0030-024ST ø 5.0 mm x length 24 mm

102-0030-026ST ø 5.0 mm x length 26 mm

102-0030-028ST ø 5.0 mm x length 28 mm

102-0030-030ST ø 5.0 mm x length 30 mm

102-0030-032ST ø 5.0 mm x length 32 mm

102-0030-034ST ø 5.0 mm x length 34 mm

102-0030-036ST ø 5.0 mm x length 36 mm

102-0030-038ST ø 5.0 mm x length 38 mm

102-0030-040ST ø 5.0 mm x length 40 mm

102-0030-042ST ø 5.0 mm x length 42 mm

102-0030-044ST ø 5.0 mm x length 44 mm

102-0030-046ST ø 5.0 mm x length 46 mm

102-0030-048ST ø 5.0 mm x length 48 mm

102-0030-050ST ø 5.0 mm x length 50 mm

102-0030-055ST ø 5.0 mm x length 55 mm

102-0030-060ST ø 5.0 mm x length 60 mm

102-0030-065ST ø 5.0 mm x length 65 mm

102-0030-070ST ø 5.0 mm x length 70 mm

102-0030-075ST ø 5.0 mm x length 75 mm

102-0030-080ST ø 5.0 mm x length 80 mm

102-0030-085ST ø 5.0 mm x length 85 mm

102-0030-090ST ø 5.0 mm x length 90 mm

102-0030-095ST ø 5.0 mm x length 95 mm

102-0030-100ST ø 5.0 mm x length 100 mm

TITANIUM FUSION LOCK DIA. 5.0 MM LOCKING SCREW IMPLANTS

Product description: Titanium locking screw, fullthreaded ø 5.0 mm, self-tapping

Important technical dimensions:Head diameter ø 8.0 mmHexagonal socket width 3.5 mmHead thread M7 / pitch 1.0 mmCore diameter for cortical thread ø 4.3 mmThread pitch 1.0 mmApplicable drill bit for thread hole ø 4.3 mm, length 195 mm calibrated Note: Tapping is not applicable for this screw!Material: Titanium

TITANIUM FUSION LOCK IMPLANTS

10

Ref. No. Diameter102-0060-010 Titanium distance bolt ø 5.0 mm

Ref. No. Diameter001-0019-013T Titanium washer ø 13.0 mm

Product description: Titanium washer used for standard titanium screws ø 4.5 mm / ø 6.5 mm Material: Titanium

TITANIUM FUSION LOCK IMPLANTS

Product description: Titanium distance bolt

Important technical dimensions: Head diameter ø 8.0 mm Hexagonal socket width 3.5 mm Head thread M7 / pitch 1.0 mm Material: Titanium

11

Ref. No. Diameter and complete length001-0008-012ST ø 4.5 mm x length 12 mm

001-0008-014ST ø 4.5 mm x length 14 mm

001-0008-016ST ø 4.5 mm x length 16 mm

001-0008-018ST ø 4.5 mm x length 18 mm

001-0008-020ST ø 4.5 mm x length 20 mm

001-0008-022ST ø 4.5 mm x length 22 mm

001-0008-024ST ø 4.5 mm x length 24 mm

001-0008-026ST ø 4.5 mm x length 26 mm

001-0008-028ST ø 4.5 mm x length 28 mm

001-0008-030ST ø 4.5 mm x length 30 mm

001-0008-032ST ø 4.5 mm x length 32 mm

001-0008-034ST ø 4.5 mm x length 34 mm

001-0008-036ST ø 4.5 mm x length 36 mm

001-0008-038ST ø 4.5 mm x length 38 mm

001-0008-040ST ø 4.5 mm x length 40 mm

001-0008-042ST ø 4.5 mm x length 42 mm

001-0008-044ST ø 4.5 mm x length 44 mm

001-0008-046ST ø 4.5 mm x length 46 mm

001-0008-048ST ø 4.5 mm x length 48 mm

001-0008-050ST ø 4.5 mm x length 50 mm

001-0008-052ST ø 4.5 mm x length 52 mm

001-0008-054ST ø 4.5 mm x length 54 mm

001-0008-056ST ø 4.5 mm x length 56 mm

001-0008-058ST ø 4.5 mm x length 58 mm

001-0008-060ST ø 4.5 mm x length 60 mm

001-0008-062ST ø 4.5 mm x length 62 mm

001-0008-064ST ø 4.5 mm x length 64 mm

001-0008-065ST ø 4.5 mm x length 65 mm

001-0008-070ST ø 4.5 mm x length 70 mm

Ref. No. Diameter and complete length001-0008-075ST ø 4.5 mm x length 75 mm

001-0008-080ST ø 4.5 mm x length 80 mm

001-0008-085ST ø 4.5 mm x length 85 mm

001-0008-090ST ø 4.5 mm x length 90 mm

001-0008-095ST ø 4.5 mm x length 95 mm

001-0008-100ST ø 4.5 mm x length 100 mm

001-0008-105ST ø 4.5 mm x length 105 mm

001-0008-110ST ø 4.5 mm x length 110 mm

001-0008-115ST ø 4.5 mm x length 115 mm

001-0008-120ST ø 4.5 mm x length 120 mm

TITANIUM STANDARD CORTICAL SCREWS DIA. 4.5 MM CORTICAL SCREW IMPLANTS

Product description:Titanium fullthreaded - cortical screws ø 4.5 mm, self-tapping

Important technical dimensions:Head diameter ø 8.0 mmHexagonal socket width 3.5 mmCore diameter for cortical thread ø 3.2 mmThread pitch 1.75 mmApplicable drill bit for thread hole ø 3.2 mmNote: Tapping is not applicable for this screw!Material: Titanium

TITANIUM FUSION LOCK IMPLANTS

12

SET-011-0010-025 TITANIUM FUSION LOCK LARGE FRAGMENT SCREW SET, 5.0 MM SYSTEM

Ref. No. PRODUCT DESCRIPTION Pcs.TRAY-011-0010-025 TRAY-011-0010-025 Tray Fusion Lock large fragment screw

SET-011-0010-025 (Graphic case)1

Ref. No. Titanium locking screw, fullthreaded ø 5.0 mm, self-tapping102-0030-014ST Locking screw ø 5.0 mm x length 14 mm 5102-0030-016ST Locking screw ø 5.0 mm x length 16 mm 5102-0030-018ST Locking screw ø 5.0 mm x length 18 mm 5102-0030-020ST Locking screw ø 5.0 mm x length 20 mm 5102-0030-022ST Locking screw ø 5.0 mm x length 22 mm 5102-0030-024ST Locking screw ø 5.0 mm x length 24 mm 5102-0030-026ST Locking screw ø 5.0 mm x length 26 mm 5102-0030-028ST Locking screw ø 5.0 mm x length 28 mm 5102-0030-030ST Locking screw ø 5.0 mm x length 30 mm 5102-0030-032ST Locking screw ø 5.0 mm x length 32 mm 5102-0030-034ST Locking screw ø 5.0 mm x length 34 mm 5102-0030-036ST Locking screw ø 5.0 mm x length 36 mm 5102-0030-038ST Locking screw ø 5.0 mm x length 38 mm 5102-0030-040ST Locking screw ø 5.0 mm x length 40 mm 5102-0030-042ST Locking screw ø 5.0 mm x length 42 mm 5102-0030-044ST Locking screw ø 5.0 mm x length 44 mm 5102-0030-046ST Locking screw ø 5.0 mm x length 46 mm 5102-0030-048ST Locking screw ø 5.0 mm x length 48 mm 5102-0030-050ST Locking screw ø 5.0 mm x length 50 mm 5102-0030-055ST Locking screw ø 5.0 mm x length 55 mm 5102-0030-060ST Locking screw ø 5.0 mm x length 60 mm 5102-0030-065ST Locking screw ø 5.0 mm x length 65 mm 5102-0030-070ST Locking screw ø 5.0 mm x length 70 mm 5102-0030-075ST Locking screw ø 5.0 mm x length 75 mm 5102-0030-080ST Locking screw ø 5.0 mm x length 80 mm 5102-0030-085ST Locking screw ø 5.0 mm x length 85 mm 5102-0030-090ST Locking screw ø 5.0 mm x length 90 mm 5Ref. No.102-0060-010 Titanium distance bolt ø 5.0 mm 10001-0019-013T Titanium washer ø 13.0 mm 6

TRAY-011-0010-025 Tray Titanium Fusion Lock large fragment screw SET-011-0010-025 (Graphic case steel)

INDEX: SET-011-0010-025 SET- LISTING CONTENT: SCREWS / WASHER / DISTANCE BOLTS / SCREW FORCEPSLISTING CONTENT: CATALOGUE PAGE 13 UP TO 14

13

SET-011-0010-025 TITANIUM FUSION LOCK LARGE FRAGMENT SCREW SET, 5.0 MM SYSTEM

Ref. No. PRODUCT DESCRIPTION Pcs.Titanium standard cortical screws, fullthreaded ø 4.5 mm, self-tapping

001-0008-014ST Cortical screw ø 4.5 mm x length 14 mm 6001-0008-016ST Cortical screw ø 4.5 mm x length 16 mm 6001-0008-018ST Cortical screw ø 4.5 mm x length 18 mm 6001-0008-020ST Cortical screw ø 4.5 mm x length 20 mm 6001-0008-022ST Cortical screw ø 4.5 mm x length 22 mm 6001-0008-024ST Cortical screw ø 4.5 mm x length 24 mm 6001-0008-026ST Cortical screw ø 4.5 mm x length 26 mm 7001-0008-028ST Cortical screw ø 4.5 mm x length 28 mm 7001-0008-030ST Cortical screw ø 4.5 mm x length 30 mm 14001-0008-032ST Cortical screw ø 4.5 mm x length 32 mm 14001-0008-034ST Cortical screw ø 4.5 mm x length 34 mm 14001-0008-036ST Cortical screw ø 4.5 mm x length 36 mm 14001-0008-038ST Cortical screw ø 4.5 mm x length 38 mm 7001-0008-040ST Cortical screw ø 4.5 mm x length 40 mm 14001-0008-042ST Cortical screw ø 4.5 mm x length 42 mm 7001-0008-044ST Cortical screw ø 4.5 mm x length 44 mm 7001-0008-046ST Cortical screw ø 4.5 mm x length 46 mm 7001-0008-048ST Cortical screw ø 4.5 mm x length 48 mm 3001-0008-052ST Cortical screw ø 4.5 mm x length 52 mm 3001-0008-056ST Cortical screw ø 4.5 mm x length 56 mm 3001-0008-060ST Cortical screw ø 4.5 mm x length 60 mm 3001-0008-065ST Cortical screw ø 4.5 mm x length 65 mm 3001-0008-070ST Cortical screw ø 4.5 mm x length 70 mm 3Ref. No.001-0013-010 Screw holding forceps 1

TRAY-011-0010-025 Tray Titanium Fusion Lock large fragment screw SET-011-0010-025 (Graphic case steel)

INDEX: SET-011-0010-025 SET-LISTING CONTENT: SCREWS / WASHER / DISTANCE BOLTS / SCREW FORCEPSLISTING CONTENT: CATALOGUE PAGE 13 UP TO 14

RECOMMENDED STERILIZATION CONTAINER FOR SET-011-0010-024Ref. No. STERILIZATION CONTAINERC-310-200 1/2 Size container, bottom non perforated outside 285 x 280 x 200 mm / inside 262 x 260x 182 mm

14

TITANIUM BROAD PLATES 5.0 MM

Advantage high fixation stability, locking hole left / right = 4° angled!

Broad large fragment locking plates straight with combi hole used with Titanium ø 5.0 mm. Locking screws in combination with ø 4.5 mm Titanium standard cortical screws applicable for fixation of long bones, such as Humeral, Tibia and Femur, for periprosthetic fractures.

Important technical dimensions:Thickness 5.2 mmBroad / shaft 17.5 mmDistance hole / shaft 18.0 mmMaterial: Titanium

Product description:Titanium broad plate 5.0 mm, straight combi hole low touch locking plate.

Ref. No. Complete length and holes102-0100-152 Length 152 mm x hole 8

102-0100-170 Length 170 mm x hole 9

102-0100-188 Length 188 mm x hole 10

102-0100-206 Length 206 mm x hole 11

102-0100-224 Length 224 mm x hole 12

102-0100-260 Length 260 mm x hole 14

102-0100-306 Length 306 mm x hole 16

TITANIUM FUSION LOCK IMPLANTS

15

Advantage high fixation stability, locking hole left / right = 4° angled!

TITANIUM NARROW PLATES 5.0 MM Narrow large fragment locking plates straight with combi hole used with Titanium ø 5.0 mm. Locking screws in combination with ø 4.5 mm Titanium standard cortical screws.Applicable for fixation of long bones, such as Humeral, Tibia and Femur, for periprosthetic fractures.

Important technical dimensions:Thickness 4.3 mmBroad / shaft 13.5 mmDistance hole / shaft 18.0 mmMaterial: Titanium

Product description:Titanium narrow plate 5.0 mm, straight combi hole low touch locking plate.

Ref. No. Complete length and holes102-0101-098 Length 98 mm x hole 5

102-0101-116 Length 116 mm x hole 6

102-0101-134 Length 134 mm x hole 7

102-0101-152 Length 152 mm x hole 8

102-0101-170 Length 170 mm x hole 9

102-0101-188 Length 188 mm x hole 10

102-0101-224 Length 224 mm x hole 12

102-0101-260 Length 260 mm x hole 14

TITANIUM FUSION LOCK IMPLANTS

16

TITANIUM PROXIMAL MEDIAL TIBIA PLATES 5.0 MMProximal Tibia large fragment locking plates without combi hole used with Titanium ø 5.0 mm. Locking screws in combination with ø 4.5 mm Titanium standard cortical screws.Applicable for fixation of the Tibia lateral wedge, depression, bicondylar and fractures with associated shaft fractures.

Important technical dimensions:Thickness 2.9 mmBroad / shaft 14.7 mmDistance hole / shaft 15.0 mmMaterial: Titanium

Product description:Titanium proximal Tibia plate 5.0 mm, without combi hole locking plate.

Ref. No. Complete length and holesRIGHT PLATES102-0102-004 Length 101 mm x 4 hole RIGHT

102-0102-006 Length 131 mm x 6 hole RIGHT

102-0102-008 Length 161 mm x 8 hole RIGHT

102-0102-010 Length 191 mm x 10 hole RIGHT

Ref. No. Complete length and holesLEFT PLATES102-0103-004 Length 101 mm x 4 hole LEFT

102-0103-006 Length 131 mm x 6 hole LEFT

102-0103-008 Length 161 mm x 8 hole LEFT

102-0103-010 Length 191 mm x 10 hole LEFT

TITANIUM FUSION LOCK IMPLANTS

17

TITANIUM PROXIMAL TIBIA T-PLATES 5.0 MM

T-Plate large fragment locking plates without combi hole used with Titanium ø 5.0 mm.Locking Screws in combination with ø 4.5 mm Titanium standard cortical screws.Applicable for fixation of buttress metaphyseal fractures, proximal Humeral, medial Tibia plateau and distal Tibia fractureswith associated shaft fractures.

Important technical dimensions:Thickness 2.5 mmBroad / shaft 16.7 mmDistance hole / shaft 16.0 mmMaterial: Titanium

Product description:Titanium Proximal Tibia T-Plate 5.0 mm, without combi hole locking plate.

Ref. No. Complete length and holes102-0104-004 Length 85 mm x hole 4

102-0104-006 Length 117 mm x hole 6

102-0104-008 Length 149 mm x hole 8

TITANIUM FUSION LOCK IMPLANTS

18

TITANIUM DISTAL LATERAL TIBIA PLATES 5.0 MM

Distal lateral Tibia large fragment locking plates without combi hole used with Titanium ø 5.0 mm. Locking screws in combination with ø 4.5 mm Titanium standard cortical screws.Applicable for fixation of Tibia fractures with associated shaft fractures.

Important technical dimensions:Thickness 3.7 mmBroad / shaft 15.0 mmDistance hole / shaft 15.0 mmMaterial: Titanium

Product description:Titanium distal lateral Tibia plate 5.0 mm, without combi hole locking plate.

Ref. No. Complete length and holesRIGHT PLATES102-0105-005 Length 121 mm x 5 hole RIGHT

102-0105-006 Length 136 mm x 6 hole RIGHT

102-0105-008 Length 166 mm x 8 hole RIGHT

Ref. No. Complete length and holesLEFT PLATES102-0106-005 Length 121 mm x 5 hole LEFT

102-0106-006 Length 136 mm x 6 hole LEFT

102-0106-008 Length 166 mm x 8 hole LEFT

TITANIUM FUSION LOCK IMPLANTS

19

TITANIUM POSTEROMEDIAL PROXIMAL TIBIA PLATES 5.0 MM

Posteromedial Proximal Tibia Large Fragment Locking Plates without Combi Hole used with Titanium 5.0 mm Locking Screws in Combination with Ø 4.5 mm Titanium Standard Cortical Screws. Applicable for Fixation Proximal Tibia Fractures in Adults and Adolescents, indicated for internal Fixation of Posteromedial Proximal Tibia Fracture including buttressing of Fractures of the Proximal, Distal and Metaphyseal Areas of the Tibia.

Important technical dimensions:Thickness 2.9 mmBroad / shaft 16.0 mmDistance hole / shaft 15.0 mmMaterial: Titanium

Product description:Titanium Posteromedial Proximal Tibia Plate 5.0 mm, without Combi Hole Locking Plate

Ref. No. Complete length and holesRIGHT PLATES102-0107-005 Length 115 mm x 5 hole RIGHT

102-0107-007 Length 145 mm x 7 hole RIGHT

102-0107-009 Length 175 mm x 9 hole RIGHT

102-0107-011 Length 205 mm x 11 hole RIGHT

102-0107-013 Length 235 mm x 13 hole RIGHT

Ref. No. Complete length and holesLEFT PLATES102-0108-005 Length 115 mm x 5 hole LEFT

102-0108-007 Length 145 mm x 7 hole LEFT

102-0108-009 Length 175 mm x 9 hole LEFT

102-0108-011 Length 205 mm x 11 hole LEFT

102-0108-013 Length 235 mm x 13 hole LEFT

TITANIUM FUSION LOCK IMPLANTS

20

TITANIUM FUSION LOCK IMPLANTS

TITANIUM DISTAL FEMUR BUTTRESS PLATES 5.0 mm

Distal femur buttress large fragment locking plates without combi hole used with Titanium ø 5.0 mm. Locking screws in combination with ø 4.5 mm Titanium standard cortical screws.Applicable for fixation for buttressing multifragmental distal femur fractures.

Important technical dimensions:Thickness 5.6 mmBroad / shaft 16.0 mmDistance hole / shaft 20.0 mmMaterial: Titanium

Product description:Titanium distal femur buttress plate 5.0 mm, without combi hole locking plate.

Ref. No. Complete length and holesRIGHT PLATES102-0109-005 Length 159 mm x 5 hole RIGHT

102-0109-007 Length 199 mm x 7 hole RIGHT

102-0109-009 Length 239 mm x 9 hole RIGHT

102-0109-011 Length 279 mm x 11 hole RIGHT

102-0109-013 Length 319 mm x 13 hole RIGHT

Ref. No. Complete length and holesLEFT PLATES102-0110-005 Length 159 mm x 5 hole LEFT

102-0110-007 Length 199 mm x 7 hole LEFT

102-0110-009 Length 239 mm x 9 hole LEFT

102-0110-011 Length 279 mm x 11 hole LEFT

102-0110-013 Length 319 mm x 13 hole LEFT

21

TITANIUM FUSION LARGE FRAGMENT DISTAL FEMUR (BUTTRESS) PLATES 5.0 mm

Distal femur large fragment locking plates without combi hole used with Titanium ø 5.0 mm and locking screws in combination with ø 4.5 mm Titanium standard cortical screws. Applicable for fixation for buttressing multifragmental distal Femur fractures.

Important technical dimensions: Thickness 5.6 mm Broad / shaft 16.0 mm Distance hole / shaft 20.0 mm Material: Titanium

Product description: Titanium distal femur (buttress) plate 5.0 mm, without combi hole locking plate.

Ref. No. Complete length and holesRIGHT PLATES102-0111-005 Length 156 mm x 5 hole RIGHT

102-0111-007 Length 196 mm x 7 hole RIGHT

102-0111-009 Length 236 mm x 9 hole RIGHT

102-0111-011 Length 276 mm x 11 hole RIGHT

102-0111-013 Length 316 mm x 13 hole RIGHT

Ref. No. Complete length and holesLEFT PLATES102-0112-005 Length 156 mm x 5 hole LEFT

102-0112-007 Length 196 mm x 7 hole LEFT

102-0112-009 Length 236 mm x 9 hole LEFT

102-0112-011 Length 276 mm x 11 hole LEFT

102-0112-013 Length 316 mm x 13 hole LEFT

TITANIUM FUSION LOCK IMPLANTS

22

TITANIUM FUSION LOCK IMPLANTS

TITANIUM FUSION LARGE FRAGMENT PROXIMAL FEMUR PLATES 5.0 mm

Proximal femur large fragment locking plates without combi hole used with Titanium ø 5.0 mm and locking screws in combination with ø 4.5 mm Titanium standard cortical screws. Applicable for fixation fractures of the trochanteric region, trochanteric simple, cervicotrochanteric, trochanterodiaphyseal, multifrag - mental pertrochanteric, intertrochanteric, reversed or transverse fractures of the trochanteric region with additional fractures of the medial Cortex.

Important technical dimensions: Thickness 5.2 mm Broad / shaft 17.5 mm Distance hole / shaft 18.0 mm Material: Titanium

Product description: Titanium proximal femur plate 5.0 mm, without combi hole locking plate.

Ref. No. Complete length and holesRIGHT PLATES102-0113-002 Length 139 mm x 2 hole RIGHT

102-0113-003 Length 157 mm x 3 hole RIGHT

102-0113-004 Length 175 mm x 4 hole RIGHT

102-0113-005 Length 193 mm x 5 hole RIGHT

102-0113-006 Length 211 mm x 6 hole RIGHT

Length 355 mm x 14 hole RIGHT

102-0113-009 Length 265 mm x 9 hole RIGHT

102-0113-010 Length 283 mm x 10 hole RIGHT

102-0113-011 Length 301 mm x 11 hole RIGHT

102-0113-012 Length 319 mm x 12 hole RIGHT

102-0113-013

102-0113-014

102-0113-015 Length 373 mm x 15 hole RIGHT

102-0113-016 Length 391 mm x 16 hole RIGHT

102-0113-007

102-0113-008

Length 229 mm x 7 hole RIGHT

Length 247 mm x 8 hole RIGHT

Length 337 mm x 13 hole RIGHT

Ref. No. Complete length and holesLEFT PLATES102-0114-002 Length 139 mm x 2 hole LEFT

102-0114-003 Length 157 mm x 3 hole LEFT

102-0114-004 Length 175 mm x 4 hole LEFT

102-0114-005 Length 193 mm x 5 hole LEFT

102-0114-006 Length 211 mm x 6 hole LEFT

Length 355 mm x 14 hole LEFT

102-0114-009 Length 265 mm x 9 hole LEFT

102-0114-010 Length 283 mm x 10 hole LEFT

102-0114-011 Length 301 mm x 11 hole LEFT

102-0114-012 Length 319 mm x 12 hole LEFT

102-0114-013

102-0114-014

102-0114-015 Length 373 mm x 15 hole LEFT

102-0114-007

102-0114-008

Length 229 mm x 7 hole LEFT

Length 247 mm x 8 hole LEFT

Length 337 mm x 13 hole LEFT

102-0114-016 Length 391 mm x 16 hole LEFT

18Rev. 15.03.2018

mahe medical gmbh | Friedrich-Wöhler-Strasse 10 | 78576 Emmingen-Liptingen | Germany Phone +49 7465 9275-0 | Fax +49 7465 9275-29 | www.mahe-med.de

Leere SeiteLeere SeiteLeere Seite102-0111-013102-0111-013102-0111-013Leere SeiteLeere Seite