ironside™ - shur-co · ironside’s 3-9/16-inch od extruded aluminum roll tube allows the tarp to...

2
Features Applicaons WWW.SHURCO.COM CONSTRUCTION DIVISION • 2-Inch Square 14-Gauge Steel Tubing • Robust Boxed Hinge • Heavy-Duty Spiral Torsion Spring • Gear-Reduced Chain Drive • 3-9/16-Inch Extruded Aluminum Roll Tube • Reinforced Mesh or Solid Vinyl Fabric Cover • All-Steel Structural Components Shur-Seal™ Plated for Corrosion Resistance • Side Dump Trailers • Accommodates Most Makes & Models C010FL-0316 IRONSIDE™ ELECTRIC SIDE DUMP TARP

Upload: others

Post on 12-Mar-2021

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: IRONSIDE™ - Shur-Co · IronSide’s 3-9/16-inch OD extruded aluminum roll tube allows the tarp to be lifted and suspended over loads with minimal deflection and without tarp sup-port

Features Applications

WWW.SHURCO.COM

CONSTRUCTION DIVISION

• 2-Inch Square 14-Gauge Steel Tubing• Robust Boxed Hinge• Heavy-Duty Spiral Torsion Spring• Gear-Reduced Chain Drive • 3-9/16-Inch Extruded Aluminum Roll Tube• Reinforced Mesh or Solid Vinyl Fabric Cover• All-Steel Structural Components Shur-Seal™ Plated for Corrosion Resistance

• Side Dump Trailers• Accommodates Most Makes & Models

C010FL-0316

IRONSIDE™ELECTRIC SIDE DUMP TARP

Page 2: IRONSIDE™ - Shur-Co · IronSide’s 3-9/16-inch OD extruded aluminum roll tube allows the tarp to be lifted and suspended over loads with minimal deflection and without tarp sup-port

CONSTRUCTION DIVISION

SHUR-CO® of S. DakotaYankton1.877.729.2969

SHUR-CO® of OHIORavenna1.866.356.0242

SHUR-CO® of N. DAKOTAFargo1.877.868.4488

SHUR-CO® of TEXASBrookshire1.866.689.0039

SHUR-CO® of FLORIDAStuart1.800.327.8287

SHUR-CO® of ColoradoHenderson1.866.355.9173

SHUR-CO® of ILLINOISDecatur1.866.356.0246

SHUR-CO® of IOWAFort Dodge1.866.356.0245

SHUR-CO® of OKLAHOMAEl Reno1.866.356.0243

SHUR-CO® of MichiganLexington1.800.327.8287

Serving You Worldwide

Features

DescriptionThe IronSide™ electric roll tarp from Shur-Co® has been specifically designed and built to survive the harsh hauling conditions of side dump applications. The Iron-Side™ is aptly named, with all structural components manufactured from steel for maximum strength and superior performance.

The IronSide™ allows the trailer to be loaded or unloaded from either side, with the tarp stored in a protected position underneath the side rail of the trailer.

IRONSIDE™Accommodates Most Side Dump Trailers

Durable Steel Tubing The IronSide™ fea-tures spring-return arms constructed from durable 2-inch square 14-gauge steel tubing that are plat-ed for corrosion resistance. The IronSide™ utilizes a simple free-swinging arm design with a robust boxed hinge for increased support.

Gear-Reduced Chain Drive Driven by reliable worm-gear motor technology, the Iron-Side™ uses a gear-reduced chain drive. This allows the roll tube to be driven by a drive shaft fully sup-ported on both sides with triple sealed bearings, eliminating the severe overhung load and stress on the motor shaft typically seen with systems using a motor with direct attachment to the roll tube.

Extruded Aluminum Roll Tube The IronSide’s 3-9/16-inch OD extruded aluminum roll tube allows the tarp to be lifted and suspended over loads with minimal deflection and without tarp sup-port bows inside the trailer tub.

Robust Hinges for Increased Support The hinged design of the return arms allows the tarp to be tightened underneath the side rail in the closed position. This limits tarp movement in tran-sit and increases the life of the tarp. There are no complex rollers or spring-loaded knuckles to bind or wear out.

Adjustable HD Torsion Springs The arms are connected to heavy-duty torsion springs with adjustable pre-load at the arm pivots. Spiral springs last longer and are more reliable than the clock springs used by other side dump tarp systems on the market. The IronSide’s springs can be easily readjusted at the pivot point to bring the spring rate back to top performance levels.

Durable Mesh Fabric Cover The Iron-Side™ tarp is constructed from a durable mesh fab-ric reinforced on the sides with 22-ounce solid vinyl fabric and webbing on the ends of the tarp.

For more information on the IronSide™, contact your local Shur-Co® dealer or your nearest Shur-Co® location, or visit us online at www.SHURCO.com.

Distribution and Service on Six Continents!