IP Camera Quick Start GuideFront view

Power

Lan

WLan

Back view

Lan 10 / 100 GPIO 1DO / 2DI

DC 5V

Power

Lan

WLan

Lan 10 / 1 0 0

GPIO IDO/2DI

DC 5V

Lan 10/ 1 0 0

GPIO IDO/2DI

DC 5V

Mounting Connecting power

Connecting to a network

Connect the power adapter to the DC-INsocket on the camera as shown.

Connect the camera to your network hubusing a network cable as shown.

Assemble the camera mount as shown and �x it to a stable surface using the screws and plugs provided. Do not mount the camera outside or anywhere that could expose it to water.

RJ-45 LANConnector

DC-IN Socket

WirelessReceiverAntenna

GPIOPort

Light Sensor

Night VisionIR LEDs

Lens Assembly

Microphone

Power LED

LAN LED

WLAN LED

DI1 DI2 NOCOMNC

GPIO PortConnectors

Using the Browser

Enter the camera IP address in the browser address bar to connect to the camera.

Viewing - The Main ScreenWhen logged in you can view images and configure the camera. See the user manual for more detailed information on each function.

Snap Image

Record AVI

ConfigurationSettings

Open 4Port Viewer

Audio On/Off

IPCam MasterUse the supplied IPCam Master software to �nd the IP camera on a network and con�gure basic settings.

Before connecting the camera to anetwork, you will need to connect it directly to a host computer andrun IPCam Master to set an IP address and other network settings.

See the user manual for more details about how to use the IPCamMaster software.

You can view the IP camera output using a standard webbrowser.

MotionIndicators

Note: The motion indicators flash red and blue alternately when motion is detected.