ionol cp your health, our safety data sheet...2017/05/30 · ionol cp safety data sheet according...
TRANSCRIPT
-
IONOL CPSafety Data SheetAccording to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830Revision date: 5/30/2017 Supersedes: 9/1/2015 Version: 5.0
5/30/2017 EN - English / GB - United Kingdom
Your health, our commitment
SECTION 1: Identification of the substance/mixture and of the company/undertaking1.1. Product identifierProduct form : SubstanceSubstance name : IONOL CPChemical name : 2,6-di-tert-butyl-p-cresolEC-No. : 204-881-4CAS-No. : 128-37-0REACH registration No : 01-2119565113-46Formula : C15H24OSynonyms : 2.6-di terc-butyl-4-methyl phenol
1.2. Relevant identified uses of the substance or mixture and uses advised against
1.2.1. Relevant identified usesIndustrial/Professional use spec : Industrial
For professional use onlyUse of the substance/mixture : Stabilizer for cosmetics, pharmaceuticals and essential oils.
Food grade antioxidant (E-321), also applied to food packaging.Antioxidant for lubricants and greases.Antioxidant in coatings, printing inks, adhesives, waxes and leather treatment industry.Antioxidant for natural and synthetic rubbers/elastomers.Antioxidant for lubricants, industrial oils, adhesives, PVC and polyethylene.Antioxidant for plastics and synthetic resins.Antioxidant for petroleum products.Polymerization inhibitor
Title Life cycle stage Use descriptorsManufactureX PROC1, ERC1FormulationX SU5, SU6a, SU7, SU10, SU11, SU12, PC1, PC8, PC9a, PC13,
PC15, PC16, PC17, PC18, PC23, PC24, PC25, PC28, PC31, PC32, PC39, PROC1, PROC2, PROC3, PROC4, PROC5, PROC8a, PROC8b, PROC9, AC5, AC6b, AC8, AC10, AC13, ERC2
Coatings and inksX Industrial SU7, PC1, PC9a, PC15, PC18, PC23, PC31, PROC3, PROC5, PROC10, AC6, AC8, ERC6b
Coatings and inksX Professional PC1, PC9a, PC15, PC18, PC23, PC31, PROC10, PROC11, ERC8bCoatings and inksX Consumer PC1, PC5, PC10, PC15, PC18, PC23, PC31LubricantsX Industrial SU3, PC16, PC17, PC24, PC25, PROC1, PROC2, PROC7,
PROC8a, PROC8b, PROC9, PROC10, PROC13, PROC14, PROC17, ERC4
LubricantsX Professional PC16, PC17, PC24, PC25, PROC1, PROC8a, PROC8b, PROC10, PROC13, PROC17, ERC9a
LubricantsX Consumer PC24, ERC9aPaper industryX Industrial SU6b, PC8, PROC2, AC8, ERC4PolymerX Industrial SU11, SU12, PC32, PROC3, PROC4, ERC6dFuelsX Professional PC13, PROC9, PROC16, ERC9bFuelsX Consumer PC24, ERC9bCosmeticsX Consumer PC28, PC39, ERC8a
Full text of use descriptors: see section 16
1.2.2. Uses advised againstNo additional information available
1.3. Details of the supplier of the safety data sheetOxiris Chemicals S.ACtra.C-35 Km 59 - Pol. Ind. Nord-Est08470 Sant Celoni - SpainT +34 93 867 49 [email protected]
1.4. Emergency telephone numberEmergency number : +34 93 551 72 85 (CECAT) (24 h)
1/45
mailto:[email protected]
-
IONOL CPSafety Data SheetAccording to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
5/30/2017 EN - English / GB - United Kingdom
Your health, our commitment
SECTION 2: Hazards identification2.1. Classification of the substance or mixture
Classification according to Regulation (EC) No. 1272/2008 [CLP]Hazardous to the aquatic environment — Acute Hazard, Category 1
H400
Hazardous to the aquatic environment — Chronic Hazard, Category 1
H410
Full text of hazard classes and H-statements : see section 16
Adverse physicochemical, human health and environmental effectsVery toxic to aquatic life with long lasting effects.
2.2. Label elements
Labelling according to Regulation (EC) No. 1272/2008 [CLP] Extra labelling to displayExtra classification(s) to display Hazard pictograms (CLP) :
GHS09
Signal word (CLP) : WarningHazard statements (CLP) : H410 - Very toxic to aquatic life with long lasting effectsPrecautionary statements (CLP) : P273 - Avoid release to the environment
P391 - Collect spillageP501 - Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.
2.3. Other hazardsThis substance/mixture does not meet the PBT criteria of REACH regulation, annex XIIIThis substance/mixture does not meet the vPvB criteria of REACH regulation, annex XIII
SECTION 3: Composition/information on ingredients3.1. SubstancesChemical name : 2,6-di-tert-butyl-p-cresolCAS-No. : 128-37-0EC-No. : 204-881-4
Name Product identifier %2,6-di-tert-butyl-p-cresol (CAS-No.) 128-37-0
(EC-No.) 204-881-4(REACH-no) 01-2119565113-46
>= 99,9
Full text of H-phrases: see section 16
3.2. MixturesNot applicable
SECTION 4: First aid measures4.1. Description of first aid measuresFirst-aid measures general : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical
advice (show the label where possible).First-aid measures after inhalation : Assure fresh air breathing. Allow the victim to rest.First-aid measures after skin contact : Remove affected clothing and wash all exposed skin area with mild soap and water, followed
by warm water rinse.First-aid measures after eye contact : Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness
persists.First-aid measures after ingestion : Rinse mouth. Do not induce vomiting. Obtain emergency medical attention.
4.2. Most important symptoms and effects, both acute and delayedSymptoms/effects : Not expected to present a significant hazard under anticipated conditions of normal use.
4.3. Indication of any immediate medical attention and special treatment neededTreat symptomatically.
2/45
-
IONOL CPSafety Data SheetAccording to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
5/30/2017 EN - English / GB - United Kingdom
Your health, our commitment
SECTION 5: Firefighting measures5.1. Extinguishing mediaSuitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand.Unsuitable extinguishing media : Do not use a heavy water stream.
5.2. Special hazards arising from the substance or mixtureFire hazard : Not classified as flammable but will burn.Hazardous decomposition products in case of fire
: Carbon monoxide. Carbon dioxide.
5.3. Advice for firefightersFirefighting instructions : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire fighting water from entering the environment.Protection during firefighting : Do not enter fire area without proper protective equipment, including respiratory protection.
SECTION 6: Accidental release measures6.1. Personal precautions, protective equipment and emergency procedures
6.1.1. For non-emergency personnelEmergency procedures : Evacuate unnecessary personnel.
6.1.2. For emergency respondersProtective equipment : Equip cleanup crew with proper protection.Emergency procedures : Ventilate area.
6.2. Environmental precautionsPrevent entry to sewers and public waters. Notify authorities if product enters sewers or public waters. Avoid release to the environment.
6.3. Methods and material for containment and cleaning upMethods for cleaning up : On land, sweep or shovel into suitable containers. Minimize generation of dust. Store away
from other materials. Do not use any water to clean up. Collect spills and put it into appropriated container. Recover and reclaim or recycle, if practical. Dispose in a safe manner in accordance with local/national regulations.
6.4. Reference to other sectionsSee Heading 8.
SECTION 7: Handling and storage7.1. Precautions for safe handlingPrecautions for safe handling : Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour.
7.2. Conditions for safe storage, including any incompatibilitiesTechnical measures : Ground/bond container and receiving equipment.Storage conditions : Keep only in the original container in a cool, well ventilated place away from : acids and bases,
Heat sources. Keep container closed when not in use. In case of food use, do not store together with harmful, toxic or very toxic products.
Incompatible products : Strong bases. Strong acids. Oxidizing agent.Incompatible materials : Sources of ignition. Direct sunlight.Storage temperature :
-
IONOL CPSafety Data SheetAccording to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
5/30/2017 EN - English / GB - United Kingdom
Your health, our commitment
2,6-di-tert-butyl-p-cresol (128-37-0)PNEC aqua (intermittent, freshwater) 1.99 µg/LPNEC (Sediment)PNEC sediment (freshwater) 99.6 mg/kgPNEC sediment (marine water) 9.96 mg/kgPNEC (Soil)PNEC soil 47.69 µg/kg
8.2. Exposure controls
Personal protective equipment:
Avoid all unnecessary exposure. Hand protection:
Protective gloves made of PVC
Eye protection:
Chemical goggles or safety glasses
Skin and body protection:
Wear suitable protective clothing Respiratory protection:
Wear appropriate mask
Other information:
Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties9.1. Information on basic physical and chemical propertiesPhysical state : Solid
Appearance : Crystalline.Colour : White.
Odour : Characteristic.
Odour threshold : No data available
pH : No data available
Relative evaporation rate (butylacetate=1) : No data available
Melting point : 70 °C
Freezing point : Not applicable
Boiling point : 265 °C (Handbook and/or Scientific papers)
Flash point : 127 °C (Handbook and/or Scientific papers)
Auto-ignition temperature : Not applicable
Decomposition temperature : No data available
Flammability (solid, gas) : Not flammable.
Vapour pressure : 3.82 Pa (24,85 ºC)
Relative vapour density at 20 °C : No data available
Relative density : 1.048 (Handbook and/or Scientific papers)
Solubility : Water: 0.6 g/ml (Handbook and/or Scientific papers)
Log Pow : 5.2 (Handbook and/or Scientific papers)
Viscosity, kinematic : 3,47 cSt (80 ºC), 1,54 cSt (120 ºC), 0,920 cSt (160 ºC) (Handbook and/or Scientific papers)
Viscosity, dynamic : No data available
Explosive properties : No data available
Oxidising properties : The study does not need to be conducted because the substance is incapable of reacting exothermically with combustible materials.
Lower explosive limit (LEL) : 7.5 g/m³
4/45
-
IONOL CPSafety Data SheetAccording to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
5/30/2017 EN - English / GB - United Kingdom
Your health, our commitment
9.2. Other informationOther properties : Surface tension: Not applicable.
pKa: 12,2 (20 °C).Particle size distribution : 2mm (10 Mesh): 0.4%; 1.5mm: 10.6%; 1mm (18 Mesh): 21.7%; 0.75mm: 18.4%; 0.50mm (35
Mesh): 11.7%; 0.40mm: 7.8%; 0.250mm (60 Mesh): 16.5%; 2000 mg/kg Sprague Dawley rat (OECD 402 method)
Skin corrosion/irritation : Not classifiedSerious eye damage/irritation : Not classified (Read-across)Respiratory or skin sensitisation : Not classified (Read-across)Germ cell mutagenicity : Not classified (Weight of evidence. Scientific papers)Carcinogenicity : Not classified (Weight of evidence. Scientific papers)
Reproductive toxicity : Not classified (Weight of evidence. Scientific papers)STOT-single exposure : Not classified
2,6-di-tert-butyl-p-cresol (128-37-0)NOAEL (oral, rat) 100 mg/kg bodyweight
STOT-repeated exposure : Not classified
2,6-di-tert-butyl-p-cresol (128-37-0)NOAEL (oral, rat, 90 days) 25 mg/kg bodyweight/day Target organ(s): digestive organs: liver; urogenital organs: kidneys;
thyroid gland, adrenal glandsAspiration hazard : Not classified
Potential adverse human health effects and symptoms
: May irritate eyes and skin.
SECTION 12: Ecological information12.1. ToxicityEcology - water : Very toxic to aquatic life with long lasting effects.
2,6-di-tert-butyl-p-cresol (128-37-0)LC50 fish 1 0.199 mg/kg (estimated value)EC50 (aquatic invertebrates) 0.48 mg/l Test method EU C.2 (OECD 202 method). 0.39 - 0.70 mg/ml.ErC50 (algae) 0.758 mg/l (estimated value)NOEC (acute) 0.15 mg/l
12.2. Persistence and degradability2,6-di-tert-butyl-p-cresol (128-37-0)Persistence and degradability Not readily biodegradable. May cause long-term adverse effects in the environment.
5/45
-
IONOL CPSafety Data SheetAccording to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
5/30/2017 EN - English / GB - United Kingdom
Your health, our commitment
12.3. Bioaccumulative potential2,6-di-tert-butyl-p-cresol (128-37-0)Bioconcentration factor (BCF REACH) 598Log Pow 5.2 (Handbook and/or Scientific papers)Bioaccumulative potential Not established.
12.4. Mobility in soil2,6-di-tert-butyl-p-cresol (128-37-0)Mobility in soil Substance sinks in water. Adsorbs into the soilSurface tension Not applicable
12.5. Results of PBT and vPvB assessment2,6-di-tert-butyl-p-cresol (128-37-0)This substance/mixture does not meet the PBT criteria of REACH regulation, annex XIIIThis substance/mixture does not meet the vPvB criteria of REACH regulation, annex XIII
12.6. Other adverse effectsAdditional information : Avoid release to the environment
SECTION 13: Disposal considerations13.1. Waste treatment methodsWaste treatment methods : Dispose of this material and its container to hazardous or special waste collection point, in
accordance with local, regional, national and/or international regulation.Ecology - waste materials : Avoid release to the environment.
SECTION 14: Transport informationIn accordance with ADR / IMDG / IATA
14.1. UN numberUN-No. (ADR) : 3077UN-No. (IMDG) : 3077UN-No. (IATA) : 3077
14.2. UN proper shipping nameProper Shipping Name (ADR) (ADR) : ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (2,6-di-tert-butyl-p-cresol)Proper Shipping Name (ADR) (IMDG) : ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (2,6-di-tert-butyl-p-cresol)Proper Shipping Name (ADR) (IATA) : Environmentally hazardous substance, solid, n.o.s. (2,6-di-tert-butyl-p-cresol)Transport document description (ADR) : UN 3077 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (2,6-di-tert-butyl-
p-cresol), 9, III, (E)Transport document description (IMDG) : UN 3077 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (2,6-di-tert-butyl-
p-cresol), 9, III, MARINE POLLUTANTTransport document description (IATA) : UN 3077 Environmentally hazardous substance, solid, n.o.s. (2,6-di-tert-butyl-p-cresol), 9, III
14.3. Transport hazard class(es)ADRTransport hazard class(es) (ADR) : 9Danger labels (ADR) : 9
:
IMDGTransport hazard class(es) (IMDG) : 9Danger labels (IMDG) : 9
:
6/45
-
IONOL CPSafety Data SheetAccording to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
5/30/2017 EN - English / GB - United Kingdom
Your health, our commitment
IATATransport hazard class(es) (IATA) : 9Hazard labels (IATA) : 9
:
14.4. Packing groupPacking group (ADR) : IIIPacking group (IMDG) : IIIPacking group (IATA) : III
14.5. Environmental hazardsDangerous for the environment : YesMarine pollutant : YesOther information : No supplementary information available
14.6. Special precautions for user
- Overland transportClassification code (ADR) : M7 Special provisions (ADR) : 274, 335, 601, 375Limited quantities (ADR) : 5kgExcepted quantities (ADR) : E1Transport category (ADR) : 3Hazard identification number (Kemler No.) : 90 Orange plates :
Tunnel restriction code (ADR) : E EAC code : 2Z
- Transport by seaLimited quantities (IMDG) : 5 kgExcepted quantities (IMDG) : E1EmS-No. (Fire) : F-AEmS-No. (Spillage) : S-FStowage and handling (IMDG) : SW23MFAG-No : 171
- Air transportPCA Excepted quantities (IATA) : E1PCA Limited quantities (IATA) : Y956PCA limited quantity max net quantity (IATA) : 30kgG
14.7. Transport in bulk according to Annex II of Marpol and the IBC CodeNot applicable
SECTION 15: Regulatory information15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
15.1.1. EU-RegulationsThe following restrictions are applicable according to Annex XVII of the REACH Regulation (EC) No 1907/2006:
3. Liquid substances or mixtures which are regarded as dangerous in accordance with Directive 1999/45/EC or are fulfilling the criteria for any of the following hazard classes or categories set out in Annex I to Regulation (EC) No 1272/2008
2,6-di-tert-butyl-p-cresol
3(c) Substances or mixtures fulfilling the criteria for any of the following hazard classes or categories set out in Annex I to Regulation (EC) No 1272/2008: Hazard class 4.1
2,6-di-tert-butyl-p-cresol
7/45
-
IONOL CPSafety Data SheetAccording to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
5/30/2017 EN - English / GB - United Kingdom
Your health, our commitment
2,6-di-tert-butyl-p-cresol is not on the REACH Candidate List2,6-di-tert-butyl-p-cresol is not on the REACH Annex XIV List
15.1.2. National regulationsNo additional information available
15.2. Chemical safety assessmentFor this substance a chemical safety assessment has been carried out
SECTION 16: Other informationIndication of changes:According to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830.
Section Changed item Change Comments2.1 Classification according to
Directive 67/548/EEC [DSD] or 1999/45/EC [DPD]
Removed
8.1 Professional exposure limits Added9.1 Explosive properties Removed9.1 Lower explosive limit (LEL) Added15.1 REACH Annex XVII Added
Data sources : REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification, labelling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006.
Full text of H- and EUH-statements:Aquatic Acute 1 Hazardous to the aquatic environment — Acute Hazard, Category 1Aquatic Chronic 1 Hazardous to the aquatic environment — Chronic Hazard, Category 1H400 Very toxic to aquatic lifeH410 Very toxic to aquatic life with long lasting effectsAC10 Rubber articlesAC13 Plastic articlesAC5 Fabrics, textiles and apparelAC6 Leather articlesAC6bAC8 Paper articlesERC1 Manufacture of substancesERC2 Formulation of preparationsERC4 Industrial use of processing aids in processes and products, not becoming part of articlesERC6b Industrial use of reactive processing aidsERC6d Industrial use of process regulators for polymerisation processes in production of resins, rubbers, polymersERC8a Wide dispersive indoor use of processing aids in open systemsERC8b Wide dispersive indoor use of reactive substances in open systemsERC9a Wide dispersive indoor use of substances in closed systemsERC9b Wide dispersive outdoor use of substances in closed systemsPC1 Adhesives, sealantsPC10 Building and construction preparations not covered elsewherePC13 FuelsPC15 Non-metal-surface treatment productsPC16 Heat Transfer FluidsPC17 Hydraulic FluidsPC18 Ink and TonersPC23 Leather tanning, dye, finishing, impregnation and care productsPC24 Lubricants, Greases and Release ProductsPC25 Metal Working FluidsPC28 Perfumes, FragrancesPC31 Polishes and Wax BlendsPC32 Polymer preparations and compoundsPC39 Cosmetics, personal care productsPC5 Artists Supply and Hobby preparationsPC8 Biocidal products (e.g. Disinfectants, pest control)
8/45
-
IONOL CPSafety Data SheetAccording to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
5/30/2017 EN - English / GB - United Kingdom
Your health, our commitment
PC9a Coatings and paints, thinners, paint removersPROC1 Use in closed process, no likelihood of exposurePROC10 Roller application or brushingPROC11 Non industrial sprayingPROC13 Treatment of articles by dipping and pouringPROC14 Production of preparations or articles by tabletting, compression, extrusion, pelletisationPROC16 Using material as fuel sources, limited exposure to unburned product to be expectedPROC17 Lubrication at high energy conditions and in partly open processPROC2 Use in closed, continuous process with occasional controlled exposurePROC3 Use in closed batch process (synthesis or formulation)PROC4 Use in batch and other process (synthesis) where opportunity for exposure arisesPROC5 Mixing or blending in batch processes for formulation of preparations and articles (multistage and/or
significant contact)PROC7 Industrial sprayingPROC8a Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non
dedicated facilitiesPROC8b Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated
facilitiesPROC9 Transfer of substance or preparation into small containers (dedicated filling line, including weighing)SU10 Formulation [mixing] of preparations and/or re-packaging (excluding alloys)SU11 Manufacture of rubber productsSU12 Manufacture of plastics products, including compounding and conversionSU3 Industrial uses: Uses of substances as such or in preparations* at industrial sitesSU5 Manufacture of textiles, leather, furSU6a Manufacture of wood and wood productsSU6b Manufacture of pulp, paper and paper productsSU7 Printing and reproduction of recorded media
Safety Data Sheet applicable for regions : GB - United Kingdom
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product
9/45
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
Annex: Exposure Scenarios
9.1.1. Exposure scenario Manufacture stage ..................................................................................... 11 9.2.1. Exposure scenario Coatings and Inks sector. Industrial end-use. ........................................ 12 9.3.1. Exposure scenario Coatings and Inks sector. Professional end-use ................................... 16 9.4.1. Exposure scenario Coatings and Inks sector. Consumer end-use stage ............................ 18 9.5.1. Exposure scenario Paper Sector. Industrial end-use stage................................................... 19 9.6.1. Exposure scenario Cosmetics. Consumer use ........................................................................ 21 9.7.1. Exposure scenario Lubricants sector. Industrial end-use stage ........................................... 22 9.8.1. Exposure scenario Lubricants sector. Professional end-use stage ...................................... 28 9.9.1. Exposure scenario Lubricants sector. Consumer end-use stage ......................................... 34 9.10.1. Exposure scenario Fuels sector. Consumer end-use of fuels ............................................. 34 9.11.1. Exposure scenario Professional end-use stage .................................................................... 35 9.12.1. Exposure scenario Coatings and Inks sector. Industrial end-use....................................... 37 9.13.1. Exposure scenario Formulation stage 2 ................................................................................. 39
9.1.1. Exposure scenario Manufacture stage Manufacture stage
Environment: ERC 1
Worker
Process during manufacturing PROC 1
Operational conditions and risk management measures
Closed system
Control of environmental exposure: Manufacture stage
Product characteristics
Amounts used
Daily use at a site
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
Conditions and measures related to municipal sewage treatment plant
Municipal STP Yes [Water: 100%]
Discharge rate of STP >= 2E3 m3/d
Application of the STP sludge on agricultural soil No
Conditions and measures related to external treatment of waste for disposal
Waste incineration waste incinerated [Water: 100%; Air: 100%; Soil: 100%]
Conditions and measures related to external recovery of waste
Additional good practice advice beyond the REACH CSA
Control of workers exposure for "Process during manufacturing " [PROC 1]
Inhal*) Derm*)
Loc Sys Loc Sys
Product characteristics
Substance in preparation No L
Dustiness Medium L
concentration < 5 % L L
Amounts used
Frequency and duration of use/exposure
Duration of activity >4 hours L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
Place of use Indoors L
Surface of skin exposed One hand face only (240 cm2) L
Technical conditions and measures at process level (source) to prevent release
Level of containment Use in closed process, no likelihood of exposure L
Technical conditions and measures to control dispersion from source towards the worker
Local Exhaust Ventilation No L L
Organisational measures to prevent /limit releases, dispersion and exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Respiratory protection Respiratory protection capable offering a 90% reduction in inhaled concentrations of the substance
L
gloves chemically resistant gloves with specific activity training [Dermal: 95%]
L
wear chemically resistant gloves (tested to EN374) in combination with specific activity training (PPE17)
Additional good practice advice beyond the REACH CSA
*) The route of exposure (Inhalation, Dermal) and type of effect (Local, Systemic and Acute or Long term) for which the determinant has been used for exposure estimation are reported.
9.2.1. Exposure scenario Coatings and Inks sector. Industrial end-use.
According to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
11/45
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
Coatings and Inks sector. Industrial end-use.
Market sector: Adhesives (PC 1) Coatings and Inks (PC 9a) Toners and Inks (PC 18) Non-metal surface treatment(PC 15) Leather treatment (PC 23) Polishes (PC 31)
Sector of use: SU 3 – Industrial uses SU 5 – Manufacture of textiles, leather, fur SU 6a – Manufacture of wood and wood products
SU 7 - Printing and reproduction of recorded media
Environment: ERC 6b
Worker
Use in batch PROC 3
Mixing PROC 5
Application by roller or brush PROC 10
Operational conditions and risk management measures
Control of environmental exposure: Industrial end-use stage
Product characteristics
Amounts used
Daily use at a site = 2E3 m3/d
Application of the STP sludge on agricultural soil No
Conditions and measures related to external treatment of waste for disposal
Waste incineration waste incinerated [Water: 100%; Air: 100%; Soil: 100%]
According to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
12/45
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
Conditions and measures related to external recovery of waste
Additional good practice advice beyond the REACH CSA
Control of workers exposure for " Use in batch" [PROC 3]
Inhal*) Derm*)
Loc Sys Loc Sys
Product characteristics
Substance in preparation Yes < 5% L
Dustiness Medium L
Amounts used
Frequency and duration of use/exposure
Duration of activity >4 hours L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
Place of use Indoors L
Surface of skin exposed One hand face only (240 cm2) L
Technical conditions and measures at process level (source) to prevent release
Level of containment Use in closed batch process (synthesis or formulation)
L
Technical conditions and measures to control dispersion from source towards the worker
Local Exhaust Ventilation Yes L L
Organisational measures to prevent /limit releases, dispersion and exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Respiratory protection Respiratory protection capable offering a 90% reduction in inhaled concentrations of the substance
L
gloves chemically resistant gloves with basic training [Dermal: 90%]
L
wear chemically resistant gloves (tested to EN374) in combination with basic employee training
Additional good practice advice beyond the REACH CSA
*) The route of exposure (Inhalation, Dermal) and type of effect (Local, Systemic and Acute or Long term) for which the determinant has been used for exposure estimation are reported.
Control of workers exposure for "Mixing" [PROC 5]
Inhal*) Derm*)
Loc Sys Loc Sys
Product characteristics
Substance in preparation Yes < 5% L
Dustiness Medium L
Amounts used
Frequency and duration of use/exposure
Duration of activity >4 hours L
Human factors not influenced by risk management
According to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
13/45
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
Conditions and measures related to external recovery of waste
Additional good practice advice beyond the REACH CSA
Control of workers exposure for "Roller or brush application" [PROC 10]
Inhal*) Derm*)
Loc Sys Loc Sys
Product characteristics
Substance in preparation Yes L
Dustiness Low L
concentration < 5 % L L
Amounts used
Frequency and duration of use/exposure
Duration of activity 15 mins - 1 hour L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
Place of use Indoors L
Surface of skin exposed Two hands (960 cm2) L
Technical conditions and measures at process level (source) to prevent release
Technical conditions and measures to control dispersion from source towards the worker
Local Exhaust Ventilation No L L
Organisational measures to prevent /limit releases, dispersion and exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Respiratory protection Respiratory protection capable offering a 90% reduction in inhaled concentrations of the substance
L
gloves chemically resistant gloves with basic training [Dermal: 90%]
L
wear chemically resistant gloves (tested to EN374) in combination with basic employee training
Additional good practice advice beyond the REACH CSA
*) The route of exposure (Inhalation, Dermal) and type of effect (Local, Systemic and Acute or Long term) for which the determinant has been used for exposure estimation are reported.
Control of workers exposure for "Non industrial spraying" [PROC 11]
Inhal*) Derm*)
Loc Sys Loc Sys
Product characteristics
Substance in preparation Yes < 5% L
Dustiness Low L
Amounts used
Frequency and duration of use/exposure
Duration of activity 15 mins - 1 hour L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
According to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
14/45 14/45
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
Conditions and measures related to external recovery of waste
Additional good practice advice beyond the REACH CSA
Control of workers exposure for "Roller or brush application" [PROC 10]
Inhal*) Derm*)
Loc Sys Loc Sys
Product characteristics
Substance in preparation Yes L
Dustiness Low L
concentration < 5 % L L
Amounts used
Frequency and duration of use/exposure
Duration of activity 15 mins - 1 hour L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
Place of use Indoors L
Surface of skin exposed Two hands (960 cm2) L
Technical conditions and measures at process level (source) to prevent release
Technical conditions and measures to control dispersion from source towards the worker
Local Exhaust Ventilation No L L
Organisational measures to prevent /limit releases, dispersion and exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Respiratory protection Respiratory protection capable offering a 90% reduction in inhaled concentrations of the substance
L
gloves chemically resistant gloves with basic training [Dermal: 90%]
L
wear chemically resistant gloves (tested to EN374) in combination with basic employee training
Additional good practice advice beyond the REACH CSA
*) The route of exposure (Inhalation, Dermal) and type of effect (Local, Systemic and Acute or Long term) for which the determinant has been used for exposure estimation are reported.
Control of workers exposure for "Non industrial spraying" [PROC 11]
Inhal*) Derm*)
Loc Sys Loc Sys
Product characteristics
Substance in preparation Yes < 5% L
Dustiness Low L
Amounts used
Frequency and duration of use/exposure
Duration of activity 15 mins - 1 hour L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
According to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
16/45 15/45
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
Conditions and measures related to external recovery of waste
Additional good practice advice beyond the REACH CSA
Control of workers exposure for "Roller or brush application" [PROC 10]
Inhal*) Derm*)
Loc Sys Loc Sys
Product characteristics
Substance in preparation Yes L
Dustiness Low L
concentration < 5 % L L
Amounts used
Frequency and duration of use/exposure
Duration of activity 15 mins - 1 hour L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
Place of use Indoors L
Surface of skin exposed Two hands (960 cm2) L
Technical conditions and measures at process level (source) to prevent release
Technical conditions and measures to control dispersion from source towards the worker
Local Exhaust Ventilation No L L
Organisational measures to prevent /limit releases, dispersion and exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Respiratory protection Respiratory protection capable offering a 90% reduction in inhaled concentrations of the substance
L
gloves chemically resistant gloves with basic training [Dermal: 90%]
L
wear chemically resistant gloves (tested to EN374) in combination with basic employee training
Additional good practice advice beyond the REACH CSA
*) The route of exposure (Inhalation, Dermal) and type of effect (Local, Systemic and Acute or Long term) for which the determinant has been used for exposure estimation are reported.
Control of workers exposure for "Non industrial spraying" [PROC 11]
Inhal*) Derm*)
Loc Sys Loc Sys
Product characteristics
Substance in preparation Yes < 5% L
Dustiness Low L
Amounts used
Frequency and duration of use/exposure
Duration of activity 15 mins - 1 hour L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
According to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
16/45
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
Place of use Indoors L
Surface of skin exposed Two hands and upper wrists (1500 cm2) L
Technical conditions and measures at process level (source) to prevent release
Technical conditions and measures to control dispersion from source towards the worker
Local Exhaust Ventilation Yes L L
Organisational measures to prevent /limit releases, dispersion and exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Respiratory protection Respiratory protection capable offering a 90% reduction in inhaled concentrations of the substance
L
gloves chemically resistant gloves with basic training [Dermal: 90%]
L
wear chemically resistant gloves (tested to EN374) in combination with basic employee training
Additional good practice advice beyond the REACH CSA
*) The route of exposure (Inhalation, Dermal) and type of effect (Local, Systemic and Acute or Long term) for which the determinant has been used for exposure estimation are reported.
9.4.1. Exposure scenario Coatings and Inks sector. Consumer end-use stage Coatings and Inks sector. Consumer end-use stage
Market sector: Adhesives (PC 1) Coatings and Inks (PC 9a) Toners and Inks (PC 18) Non-metal surface treatment(PC 15) Leather treatment (PC 23) Polishes (PC 31)
Environment: ERC 8c
Consumer
Roller or brush application PROC 10 PC 5; PC 9; PC10
Operational conditions and risk management measures
Control of environmental exposure: Consumer end-use stage
Product characteristics
Up to 5% BHT
Amounts used*
500 g
Daily wide dispersive use = 5E-5 tonnes/day
Frequency and duration of use
Daily, during 2,2 hours (ECETOC TRA Consumers default)
Environment factors not influenced by risk management
According to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
17/45
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
Receiving surface water flow rate >= 1.8E4 m3/d
CEPE 11 consumers CEPE 11 [Water: 99%; Air: 1%; Soil: 100%]
Other given operational conditions affecting environmental exposure
Conditions and measures related to municipal sewage treatment plant
Municipal STP Yes [Water: 93.5%]
Discharge rate of STP >= 2E3 m3/d
Application of the STP sludge on agricultural soil Yes
Conditions and measures related to external treatment of waste for disposal
Conditions and measures related to external recovery of waste
Additional good practice advice beyond the REACH CSA
Control of consumers exposure for "Roller or brushing painting indoor" [PC 5; PC9a; PC 10]
Inhal*) Derm*) Oral*)
Loc Sys Loc Sys Loc Sys
Product characteristics
BHT concentration in paints is typically 1%. This scenario covers up to 5%.
Amounts used
500 g/day
Frequency and duration of use/exposure
Daily, during 2,2 hours (ECETOC TRA Consumers default)
Human factors not influenced by risk management
Other given operational conditions affecting consumers exposure
Conditions and measures related to information and behavioral advice to consumers
Use in a well-ventilated area. Keep away from naked flames and hot surfaces. Wash any residues off skin after use.
Conditions and measures related to personal protection and hygiene
Additional good practice advice beyond the REACH CSA
Coatings and paints/decorative coatings, fillers, putties, thinners: Where more than 300g used, then open doors and windows to provide additional ventilation Building and construction preparations: Where more than 1Kg used, then open doors and windows to provide additional ventilation
*) The route of exposure (Inhalation, Dermal, Oral) and type of effect (Local, Systemic and Acute or Long term) for which the determinant has been used for exposure estimation are reported.
9.5.1. Exposure scenario Paper Sector. Industrial end-use stage Paper Sector. Industrial end-use stage
Market sector:
PC 8 - Biocidal Products (e. g. Disinfectants, pest control)
Sector of use:
SU 6b - Manufacture of pulp, paper and paper products
Environment: ERC 4
Worker
According to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
18/45
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
Use in closed system with occasional exposure PROC 2
Operational conditions and risk management measures
Control of environmental exposure: Industrial end-use stage [edit]
Product characteristics
Preparation : BHT 4 hours L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
Place of use Indoors L
According to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
19/45
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
Surface of skin exposed Two hands face (480 cm2) L
Technical conditions and measures at process level (source) to prevent release
Level of containment Use in closed, continuous process with occasional controlled exposure
L
Technical conditions and measures to control dispersion from source towards the worker
Local Exhaust Ventilation Yes L L
Organisational measures to prevent /limit releases, dispersion and exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Respiratory protection Respiratory protection capable offering a 90% reduction in inhaled concentrations of the substance
L
gloves chemically resistant gloves with basic training [Dermal: 90%]
L
wear chemically resistant gloves (tested to EN374) in combination with basic employee training
Additional good practice advice beyond the REACH CSA
*) The route of exposure (Inhalation, Dermal) and type of effect (Local, Systemic and Acute or Long term) for which the determinant has been used for exposure estimation are reported.
9.6.1. Exposure scenario Cosmetics. Consumer use Cosmetics. Consumer use
Market sector: PC 28 perfumes
PC 39 - Cosmetics, personal care products
Environment: ERC 8a
Consumers: Covered by Cosmetic Directive
Operational conditions and risk management measures
No applicable Control of environmental exposure: Cosmetics
Product characteristics
< 5%
Amounts used
Daily wide dispersive use = 4.1E-6 tonnes/day
Frequency and duration of use
Environment factors not influenced by risk management
Receiving surface water flow rate >= 1.8E4 m3/d
Other given operational conditions affecting environmental exposure
Conditions and measures related to municipal sewage treatment plant
Municipal STP Yes [Water: 93.5%]
Discharge rate of STP >= 2E3 m3/d
Application of the STP sludge on agricultural soil Yes
Conditions and measures related to external treatment of waste for disposal
Conditions and measures related to external recovery of waste
According to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
20/45
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
Additional good practice advice beyond the REACH CSA
9.7.1. Exposure scenario Lubricants sector. Industrial end-use stage Lubricants sector. Industrial end-use stage
Market sector:
PC 16 – heat transfer fluids PC 17 – Hydraulic fluids PC 24 - Lubricants, Greases, Release Products PC 25 – metal working fluids
Sector of use:
SU 3 – Industrial uses
Environment: ERC 4 ERC 7
Worker
Use in closed PROC 1
Use in closed with occasion for exposure PROC 2
Industrial spraying PROC 7
Charging/discharging PROC 8b
Filling small containers PROC 9
Application PROC 10
Dipping articles PROC 13
Lubrication PROC 17
Operational conditions and risk management measures
Control of environmental exposure: Industrial end-use stage
Product characteristics
Amounts used
Daily use at a site
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
Municipal STP Yes [Water: 93.5%]
Discharge rate of STP >= 2E3 m3/d
Application of the STP sludge on agricultural soil No
Conditions and measures related to external treatment of waste for disposal
Conditions and measures related to external recovery of waste
Additional good practice advice beyond the REACH CSA
Control of workers exposure for "Use in closed" [PROC 1]
Inhal*) Derm*)
Loc Sys Loc Sys
Product characteristics
Substance in preparation yes L
Dustiness Medium L
concentration < 5 % L L
Amounts used
Frequency and duration of use/exposure
Duration of activity >4 hours L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
Place of use Indoors L
Surface of skin exposed One hand face only (240 cm2) L
Technical conditions and measures at process level (source) to prevent release
Level of containment Use in closed process, no likelihood of exposure L
Technical conditions and measures to control dispersion from source towards the worker
Local Exhaust Ventilation No L L
Organisational measures to prevent /limit releases, dispersion and exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Respiratory protection Respiratory protection capable offering a 90% reduction in inhaled concentrations of the substance
L
gloves chemically resistant gloves with specific activity training [Dermal: 95%]
L
wear chemically resistant gloves (tested to EN374) in combination with specific activity training (PPE17)
Additional good practice advice beyond the REACH CSA
*) The route of exposure (Inhalation, Dermal) and type of effect (Local, Systemic and Acute or Long term) for which the determinant has been used for exposure estimation are reported.
Control of workers exposure for "Use in closed with occasion for exposure" [PROC 2]
Inhal*) Derm*)
Loc Sys Loc Sys
Product characteristics
Substance in preparation yes L
According to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
22/45
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
Dustiness Medium L
concentration < 5 % L L
Amounts used
Frequency and duration of use/exposure
Duration of activity >4 hours L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
Place of use Indoors L
Surface of skin exposed Two hands face (480 cm2) L
Technical conditions and measures at process level (source) to prevent release
Level of containment Use in closed, continuous process with occasional controlled exposure
L
Technical conditions and measures to control dispersion from source towards the worker
Local Exhaust Ventilation Yes L L
Organisational measures to prevent /limit releases, dispersion and exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Respiratory protection Respiratory protection capable offering a 90% reduction in inhaled concentrations of the substance
L
gloves chemically resistant gloves with basic training [Dermal: 90%]
L
wear chemically resistant gloves (tested to EN374) in combination with basic employee training
Additional good practice advice beyond the REACH CSA
*) The route of exposure (Inhalation, Dermal) and type of effect (Local, Systemic and Acute or Long term) for which the determinant has been used for exposure estimation are reported.
Control of workers exposure for "Industrial spraying" [PROC 7]
Inhal*) Derm*)
Loc Sys Loc Sys
Product characteristics
Substance in preparation yes L
Dustiness Low L
concentration < 5 % L L
Amounts used
Frequency and duration of use/exposure
Duration of activity 1 - 4 hours L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
Place of use Indoors L
Surface of skin exposed Two hands and upper wrists (1500 cm2) L
Technical conditions and measures at process level (source) to prevent release
Technical conditions and measures to control dispersion from source towards the worker
Local Exhaust Ventilation Yes L L
Organisational measures to prevent /limit releases, dispersion and exposure
Conditions and measures related to personal protection, hygiene and health evaluation
According to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
23/45
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
Respiratory protection Respiratory protection capable offering a 90% reduction in inhaled concentrations of the substance
L
gloves chemically resistant gloves with basic training [Dermal: 90%]
L
wear chemically resistant gloves (tested to EN374) in combination with basic employee training
Additional good practice advice beyond the REACH CSA
*) The route of exposure (Inhalation, Dermal) and type of effect (Local, Systemic and Acute or Long term) for which the determinant has been used for exposure estimation are reported.
Control of workers exposure for "Charging/discharging" [PROC 8b]
Inhal*) Derm*)
Loc Sys Loc Sys
Product characteristics
Substance in preparation yes L
Dustiness Low L
concentration < 5 % L L
Amounts used
Frequency and duration of use/exposure
Duration of activity 15 mins - 1 hour L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
Place of use Indoors L
Surface of skin exposed Two hands face (480 cm2) L
Technical conditions and measures at process level (source) to prevent release
Technical conditions and measures to control dispersion from source towards the worker
Local Exhaust Ventilation Yes L L
Organisational measures to prevent /limit releases, dispersion and exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Respiratory protection Respiratory protection capable offering a 90% reduction in inhaled concentrations of the substance
L
gloves chemically resistant gloves with basic training [Dermal: 90%]
L
wear chemically resistant gloves (tested to EN374) in combination with basic employee training
Additional good practice advice beyond the REACH CSA
*) The route of exposure (Inhalation, Dermal) and type of effect (Local, Systemic and Acute or Long term) for which the determinant has been used for exposure estimation are reported.
Control of workers exposure for "Filling small containers" [PROC 9]
Inhal*) Derm*)
Loc Sys Loc Sys
Product characteristics
Substance in preparation yes L
Dustiness Low L
According to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
24/45
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
concentration < 5 % L L
Amounts used
Frequency and duration of use/exposure
Duration of activity >4 hours L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
Place of use Indoors L
Surface of skin exposed Two hands face (480 cm2) L
Technical conditions and measures at process level (source) to prevent release
Technical conditions and measures to control dispersion from source towards the worker
Local Exhaust Ventilation Yes L L
Organisational measures to prevent /limit releases, dispersion and exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Respiratory protection Respiratory protection capable offering a 90% reduction in inhaled concentrations of the substance
L
gloves chemically resistant gloves with basic training [Dermal: 90%]
L
wear chemically resistant gloves (tested to EN374) in combination with basic employee training
Additional good practice advice beyond the REACH CSA
*) The route of exposure (Inhalation, Dermal) and type of effect (Local, Systemic and Acute or Long term) for which the determinant has been used for exposure estimation are reported.
Control of workers exposure for "Application" [PROC 10]
Inhal*) Derm*)
Loc Sys Loc Sys
Product characteristics
Substance in preparation yes L
Dustiness Low L
concentration < 5 % L L
Amounts used
Frequency and duration of use/exposure
Duration of activity >4 hours L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
Place of use Indoors L
Surface of skin exposed Two hands (960 cm2) L
Technical conditions and measures at process level (source) to prevent release
Technical conditions and measures to control dispersion from source towards the worker
Local Exhaust Ventilation Yes L L
Organisational measures to prevent /limit releases, dispersion and exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Respiratory protection Respiratory protection capable offering a 90% reduction in inhaled concentrations of the substance
L
According to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
25/45
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
gloves chemically resistant gloves with basic training [Dermal: 90%]
L
wear chemically resistant gloves (tested to EN374) in combination with basic employee training
Additional good practice advice beyond the REACH CSA
*) The route of exposure (Inhalation, Dermal) and type of effect (Local, Systemic and Acute or Long term) for which the determinant has been used for exposure estimation are reported.
Control of workers exposure for "Dipping articles" [PROC 13]
Inhal*) Derm*)
Loc Sys Loc Sys
Product characteristics
Substance in preparation yes L
Dustiness Low L
concentration < 5 % L L
Amounts used
Frequency and duration of use/exposure
Duration of activity >4 hours L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
Place of use Indoors L
Surface of skin exposed Two hands face (480 cm2) L
Technical conditions and measures at process level (source) to prevent release
Technical conditions and measures to control dispersion from source towards the worker
Local Exhaust Ventilation Yes L L
Organisational measures to prevent /limit releases, dispersion and exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Respiratory protection Respiratory protection capable offering a 90% reduction in inhaled concentrations of the substance
L
gloves chemically resistant gloves with specific activity training [Dermal: 95%]
L
wear chemically resistant gloves (tested to EN374) in combination with specific activity training (PPE17)
Additional good practice advice beyond the REACH CSA
*) The route of exposure (Inhalation, Dermal) and type of effect (Local, Systemic and Acute or Long term) for which the determinant has been used for exposure estimation are reported.
Control of workers exposure for "Lubrication" [PROC 17]
Inhal*) Derm*)
Loc Sys Loc Sys
Product characteristics
Substance in preparation yes L
Dustiness Low L
concentration < 5 % L L
According to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
26/45
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
Amounts used
Frequency and duration of use/exposure
Duration of activity 15 mins - 1 hour L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
Place of use Indoors L
Surface of skin exposed Two hands (960 cm2) L
Technical conditions and measures at process level (source) to prevent release
Technical conditions and measures to control dispersion from source towards the worker
Local Exhaust Ventilation Yes L L
Organisational measures to prevent /limit releases, dispersion and exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Respiratory protection Respiratory protection capable offering a 90% reduction in inhaled concentrations of the substance
L
gloves chemically resistant gloves with specific activity training [Dermal: 95%]
L
wear chemically resistant gloves (tested to EN374) in combination with specific activity training (PPE17)
Additional good practice advice beyond the REACH CSA
*) The route of exposure (Inhalation, Dermal) and type of effect (Local, Systemic and Acute or Long term) for which the determinant has been used for exposure estimation are reported.
9.8.1. Exposure scenario Lubricants sector. Professional end-use stage Lubricants sector. Professional end-use stage
Market sector:
PC 16 - Heat transfer fluids PC 17 – Hydraulic fluids PC 24 - Lubricants, Greases, Release Products PC 25 – metal working fluids
Sector of use:
SU 22 - Professional uses
Environment: ERC 9a
Worker
Use in closed system PROC 1
Transfer at non-dedicated facilities PROC 8a
Transfer at dedicated facilities PROC 8b
Application PROC 10
Spraying PROC 11
Dipping articles PROC 13
Lubircation PROC 17
Operational conditions and risk management measures
Control of environmental exposure: Professional end-use stage
According to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
27/45
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
Product characteristics
Amounts used
Daily wide dispersive use = 7.5E-5 tonnes/day
Frequency and duration of use
Environment factors not influenced by risk management
Receiving surface water flow rate >= 1.8E4 m3/d
Other given operational conditions affecting environmental exposure
Technical conditions and measures at process level (source) to prevent release
Technical onsite conditions and measures to reduce or limit discharges, air emissions and releases to soil
ESVOC 14 ESVOC 14 [Water: 99%; Air: 99%; Soil: 99%]
Professional
Organizational measures to prevent/limit release from site
Conditions and measures related to municipal sewage treatment plant
Municipal STP Yes [Water: 93.5%]
Discharge rate of STP >= 2E3 m3/d
Application of the STP sludge on agricultural soil Yes
Conditions and measures related to external treatment of waste for disposal
Conditions and measures related to external recovery of waste
Additional good practice advice beyond the REACH CSA
Control of workers exposure for "Use in closed system" [PROC 1]
Inhal*) Derm*)
Loc Sys Loc Sys
Product characteristics
Substance in preparation Yes L
Dustiness Low L
concentration < 5 % L L
Amounts used
Frequency and duration of use/exposure
Duration of activity >4 hours L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
Place of use Indoors L
Surface of skin exposed One hand face only (240 cm2) L
Technical conditions and measures at process level (source) to prevent release
Level of containment Use in closed process, no likelihood of exposure L
Technical conditions and measures to control dispersion from source towards the worker
Local Exhaust Ventilation No L L
Organisational measures to prevent /limit releases, dispersion and exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Respiratory protection Respiratory protection capable offering a 90% reduction in inhaled concentrations of the substance
L
gloves chemically resistant gloves with basic training L
According to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
28/45
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
[Dermal: 90%]
wear chemically resistant gloves (tested to EN374) in combination with basic employee training
Additional good practice advice beyond the REACH CSA
*) The route of exposure (Inhalation, Dermal) and type of effect (Local, Systemic and Acute or Long term) for which the determinant has been used for exposure estimation are reported.
Control of workers exposure for "Transfer at non-dedicated facilities" [PROC 8a]
Inhal*) Derm*)
Loc Sys Loc Sys
Product characteristics
Substance in preparation Yes L
Dustiness Low L
concentration < 5 % L L
Amounts used
Frequency and duration of use/exposure
Duration of activity >4 hours L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
Place of use Indoors L
Surface of skin exposed Two hands (960 cm2) L
Technical conditions and measures at process level (source) to prevent release
Technical conditions and measures to control dispersion from source towards the worker
Local Exhaust Ventilation No L L
Organisational measures to prevent /limit releases, dispersion and exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Respiratory protection Respiratory protection capable offering a 90% reduction in inhaled concentrations of the substance
L
gloves chemically resistant gloves with basic training [Dermal: 90%]
L
wear chemically resistant gloves (tested to EN374) in combination with basic employee training
Additional good practice advice beyond the REACH CSA
*) The route of exposure (Inhalation, Dermal) and type of effect (Local, Systemic and Acute or Long term) for which the determinant has been used for exposure estimation are reported.
Control of workers exposure for "Transfer at dedicated facilities" [PROC 8b]
Inhal*) Derm*)
Loc Sys Loc Sys
Product characteristics
Substance in preparation Yes L
Dustiness Low L
concentration < 5 % L L
Amounts used
According to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
29/45
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
Frequency and duration of use/exposure
Duration of activity >4 hours L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
Place of use Indoors L
Surface of skin exposed Two hands face (480 cm2) L
Technical conditions and measures at process level (source) to prevent release
Technical conditions and measures to control dispersion from source towards the worker
Local Exhaust Ventilation No L L
Organisational measures to prevent /limit releases, dispersion and exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Respiratory protection Respiratory protection capable offering a 90% reduction in inhaled concentrations of the substance
L
gloves chemically resistant gloves with basic training [Dermal: 90%]
L
wear chemically resistant gloves (tested to EN374) in combination with basic employee training
Additional good practice advice beyond the REACH CSA
*) The route of exposure (Inhalation, Dermal) and type of effect (Local, Systemic and Acute or Long term) for which the determinant has been used for exposure estimation are reported.
Control of workers exposure for "Application" [PROC 10]
Inhal*) Derm*)
Loc Sys Loc Sys
Product characteristics
Substance in preparation Yes L
Dustiness Low L
concentration < 5 % L L
Amounts used
Frequency and duration of use/exposure
Duration of activity 15 mins - 1 hour L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
Place of use Indoors L
Surface of skin exposed Two hands (960 cm2) L
Technical conditions and measures at process level (source) to prevent release
Technical conditions and measures to control dispersion from source towards the worker
Local Exhaust Ventilation No L L
Organisational measures to prevent /limit releases, dispersion and exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Respiratory protection Respiratory protection capable offering a 90% reduction in inhaled concentrations of the substance
L
gloves chemically resistant gloves with basic training [Dermal: 90%]
L
According to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
30/45
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
wear chemically resistant gloves (tested to EN374) in combination with basic employee training
Additional good practice advice beyond the REACH CSA
*) The route of exposure (Inhalation, Dermal) and type of effect (Local, Systemic and Acute or Long term) for which the determinant has been used for exposure estimation are reported.
Control of workers exposure for "Spraying" [PROC 11]
Inhal*) Derm*)
Loc Sys Loc Sys
Product characteristics
Substance in preparation Yes L
Dustiness Low L
Amounts used
Frequency and duration of use/exposure
Duration of activity 15 mins - 1 hour L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
Place of use Indoors L
Surface of skin exposed Two hands and upper wrists (1500 cm2) L
Technical conditions and measures at process level (source) to prevent release
Technical conditions and measures to control dispersion from source towards the worker
Local Exhaust Ventilation Yes L L
Organisational measures to prevent /limit releases, dispersion and exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Respiratory protection Respiratory protection capable offering a 90% reduction in inhaled concentrations of the substance
L
gloves chemically resistant gloves with basic training [Dermal: 90%]
L
wear chemically resistant gloves (tested to EN374) in combination with basic employee training
Additional good practice advice beyond the REACH CSA
*) The route of exposure (Inhalation, Dermal) and type of effect (Local, Systemic and Acute or Long term) for which the determinant has been used for exposure estimation are reported.
Control of workers exposure for "Dipping articles" [PROC 13]
Inhal*) Derm*)
Loc Sys Loc Sys
Product characteristics
Substance in preparation Yes L
Dustiness Low L
concentration < 5 % L L
Amounts used
Frequency and duration of use/exposure
Duration of activity >4 hours L
According to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
31/45
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
Place of use Indoors L
Surface of skin exposed Two hands face (480 cm2) L
Technical conditions and measures at process level (source) to prevent release
Technical conditions and measures to control dispersion from source towards the worker
Local Exhaust Ventilation No L L
Organisational measures to prevent /limit releases, dispersion and exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Respiratory protection Respiratory protection capable offering a 90% reduction in inhaled concentrations of the substance
L
gloves chemically resistant gloves with specific activity training [Dermal: 95%]
L
wear chemically resistant gloves (tested to EN374) in combination with specific activity training (PPE17)
Additional good practice advice beyond the REACH CSA
*) The route of exposure (Inhalation, Dermal) and type of effect (Local, Systemic and Acute or Long term) for which the determinant has been used for exposure estimation are reported.
Control of workers exposure for "Lubircation" [PROC 17]
Inhal*) Derm*)
Loc Sys Loc Sys
Product characteristics
Substance in preparation Yes L
Dustiness Low L
concentration < 5 % L L
Amounts used
Frequency and duration of use/exposure
Duration of activity 15 mins - 1 hour L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
Place of use Indoors L
Surface of skin exposed Two hands (960 cm2) L
Technical conditions and measures at process level (source) to prevent release
Technical conditions and measures to control dispersion from source towards the worker
Local Exhaust Ventilation No L L
Organisational measures to prevent /limit releases, dispersion and exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Respiratory protection Respiratory protection capable offering a 90% reduction in inhaled concentrations of the substance
L
gloves chemically resistant gloves with specific activity training [Dermal: 95%]
L
wear chemically resistant gloves (tested to EN374) in combination with specific activity training (PPE17)
According to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
32/45
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
Additional good practice advice beyond the REACH CSA
*) The route of exposure (Inhalation, Dermal) and type of effect (Local, Systemic and Acute or Long term) for which the determinant has been used for exposure estimation are reported.
9.9.1. Exposure scenario Lubricants sector. Consumer end-use stage Lubricants sector. Consumer end-use stage
SU 21: consumer uses
Market sector:
PC 24 - Lubricants, Greases, Release Products
Environment: ERC 9a
Consumer: PROC 10
Operational conditions and risk management measures
Control of environmental exposure: Consumer end-use stage
Product characteristics
Amounts used*
Daily wide dispersive use = 7.5E-5 tonnes/day
Frequency and duration of use
Environment factors not influenced by risk management
Receiving surface water flow rate >= 1.8E4 m3/d
Other given operational conditions affecting environmental exposure
ESVOC ESVOC 17
low release
Conditions and measures related to municipal sewage treatment plant
Municipal STP Yes [Water: 93.5%]
Discharge rate of STP >= 2E3 m3/d
Application of the STP sludge on agricultural soil Yes
Conditions and measures related to external treatment of waste for disposal
Conditions and measures related to external recovery of waste
Additional good practice advice beyond the REACH CSA
9.10.1. Exposure scenario Fuels sector. Consumer end-use of fuels Fuels sector. Consumer end-use of fuels
Market sector:
PC 13 - Fuels
Environment: ERC 9b
Consumer PROC 9 PROC 16
Operational conditions and risk management measures
Petrol station are equipped with Vapour’s capture systems
According to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
33/45
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
Control of environmental exposure: Consumer end-use of fuels
Product characteristics
Amounts used*
Daily wide dispersive use = 3.7E-5 tonnes/day
Frequency and duration of use
Environment factors not influenced by risk management
Receiving surface water flow rate >= 1.8E4 m3/d
Other given operational conditions affecting environmental exposure
ESVOC 30 fuels-consumers ESVOC 30 [Water: 100%; Air: 99.99%; Soil: 100%]
low volatility and solubility
Conditions and measures related to municipal sewage treatment plant
Municipal STP Yes [Water: 100%]
Discharge rate of STP >= 2E3 m3/d
Application of the STP sludge on agricultural soil No
Conditions and measures related to external treatment of waste for disposal
Conditions and measures related to external recovery of waste
Additional good practice advice beyond the REACH CSA
9.11.1. Exposure scenario Professional end-use stage Professional end-use stage
Market sector:
PC 13 - Fuels
Sector of use:
SU 8 - Manufacture of bulk, large scale chemicals (including petroleum products)
Environment: ERC 9b
Worker
Filling aircraft fuel taks PROC 9
Use as fuel PROC 16
Operational conditions and risk management measures
Control of environmental exposure: Professional end-use stage
Product characteristics
Amounts used
Daily wide dispersive use = 3.7E-5 tonnes/day
Frequency and duration of use
Environment factors not influenced by risk management
Receiving surface water flow rate >= 1.8E4 m3/d
Other given operational conditions affecting environmental exposure
According to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
34/45
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
Technical conditions and measures at process level (source) to prevent release
Technical onsite conditions and measures to reduce or limit discharges, air emissions and releases to soil
ESVOC 29 ESVOC 29 [Water: 100%; Air: 99.99%; Soil: 100%]
Organizational measures to prevent/limit release from site
Conditions and measures related to municipal sewage treatment plant
Municipal STP Yes [Water: 100%]
Discharge rate of STP >= 2E3 m3/d
Application of the STP sludge on agricultural soil No
Conditions and measures related to external treatment of waste for disposal
Conditions and measures related to external recovery of waste
Additional good practice advice beyond the REACH CSA
Control of workers exposure for "Filling aircraft fuel taks" [PROC 9]
Inhal*) Derm*)
Loc Sys Loc Sys
Product characteristics
Substance in preparation Yes L
Concentration of substance in product < 1 % L
Amounts used
Frequency and duration of use/exposure
Duration of activity >4 hours L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
Place of use Outdoors L
Surface of skin exposed Two hands face (480 cm2) L
Technical conditions and measures at process level (source) to prevent release
Technical conditions and measures to control dispersion from source towards the worker
Local Exhaust Ventilation No L L
Organisational measures to prevent /limit releases, dispersion and exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Respiratory protection Respiratory protection capable offering a 90% reduction in inhaled concentrations of the substance
L
gloves chemically resistant gloves with specific activity training [Dermal: 95%]
L
wear chemically resistant gloves (tested to EN374) in combination with specific activity training (PPE17)
Additional good practice advice beyond the REACH CSA
*) The route of exposure (Inhalation, Dermal) and type of effect (Local, Systemic and Acute or Long term) for which the determinant has been used for exposure estimation are reported.
Control of workers exposure for "Use as fuel" [PROC 16]
Inhal*) Derm*)
According to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
35/45
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
Loc Sys Loc Sys
Product characteristics
Substance in preparation Yes L
Concentration of substance in product < 1 % L
Amounts used
Frequency and duration of use/exposure
Duration of activity >4 hours L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
Place of use Indoors L
Surface of skin exposed One hand face only (240 cm2) L
Technical conditions and measures at process level (source) to prevent release
Technical conditions and measures to control dispersion from source towards the worker
Local Exhaust Ventilation No L L
Organisational measures to prevent /limit releases, dispersion and exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Respiratory protection Respiratory protection is not used L
Additional good practice advice beyond the REACH CSA
*) The route of exposure (Inhalation, Dermal) and type of effect (Local, Systemic and Acute or Long term) for which the determinant has been used for exposure estimation are reported.
9.12.1. Exposure scenario Coatings and Inks sector. Industrial end-use.
Coatings and Inks sector. Industrial end-use.
Market sector: Polymers (PC 32)
Sector of use: SU 3 – Industrial uses
Environment: ERC 6d
Worker
Use in batch PROC 3
Batch process with opportunity of exposure PROC 4
Operational conditions and risk management measures
Control of environmental exposure: Industrial end-use stage
Product characteristics
Amounts used
Daily use at a site
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
Annual use at a site = 1.8E4 m3/d
Other given operational conditions affecting environmental exposure
Technical conditions and measures at process level (source) to prevent release
Technical onsite conditions and measures to reduce or limit discharges, air emissions and releases to soil
EFC 3 EFC 3 [Water: 100%; Air: 98.3%; Soil: 100%]
Organizational measures to prevent/limit release from site
Wastes are incinerated
Conditions and measures related to municipal sewage treatment plant
Municipal STP Yes [Water: 100%]
Discharge rate of STP >= 2E3 m3/d
Application of the STP sludge on agricultural soil No
Conditions and measures related to external treatment of waste for disposal
Waste incineration waste incinerated [Water: 100%; Air: 100%; Soil: 100%]
Conditions and measures related to external recovery of waste
Additional good practice advice beyond the REACH CSA
Control of workers exposure for " Use in batch" [PROC 3]
Inhal*) Derm*)
Loc Sys Loc Sys
Product characteristics
Substance in preparation Yes L
Dustiness Medium L
Amounts used
Frequency and duration of use/exposure
Duration of activity >4 hours L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
Place of use Indoors L
Surface of skin exposed One hand face only (240 cm2) L
Technical conditions and measures at process level (source) to prevent release
Level of containment Use in closed batch process (synthesis or formulation)
L
Technical conditions and measures to control dispersion from source towards the worker
Local Exhaust Ventilation Yes L L
Organisational measures to prevent /limit releases, dispersion and exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Respiratory protection Respiratory protection capable offering a 90% reduction in inhaled concentrations of the
L
According to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
37/45
-
IONOL CP Safety Data Sheet
01/09/2015 EN (English) SDS Ref.: -
Your health, our commitment
substance
gloves chemically resistant gloves with basic training [Dermal: 90%]
L
wear chemically resistant gloves (tested to EN374) in combination with basic employee training
Additional good practice advice beyond the REACH CSA
*) The route of exposure (Inhalation, Dermal) and type of effect (Local, Systemic and Acute or Long term) for which the determinant has been used for exposure estimation are reported.
Control of workers exposure for "Batch with opportunity of exposure" [PROC 4]
Inhal*) Derm*)
Loc Sys Loc Sys
Product characteristics
Substance in preparation Yes L
Dustiness Medium L
Amounts used
Frequency and duration of use/exposure
Duration of activity >4 hours L
Human factors not influenced by risk management
Other given operational conditions affecting workers exposure
Place of use Indoors L
Surface of skin exposed Two hands face (480 cm2) L
Technical conditions and measures at process level (source) to prevent release
Technical conditions and measures to control dispersion from source towards the worker
Local Exhaust Ventilation Yes L L
Organisational measures to prevent /limit releases, dispersion and exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Respiratory protection Respiratory protection capable offering a 90% reduction in