iom actuator rg series

1

User Instructions RG Series Standard Actuator - AXENIM0122-00 12/09

Experience In Motion

Installation Operation

Maintenance

RG Series Standard ActuatorFCD AXENIM0122-00 12/09

USER INSTRUCTIONS

2


1 Using Flowserve Valves, Actuators and Acces-sories Correctly

1.1 General usage

Thefollowinginstructionsaredesignedtoassistinunpacking,installingandperformingmaintenanceasrequiredonFLOWSERVEproducts.Productus-ersandmaintenancepersonnelshouldthoroughlyreviewthisbulletinpriortoinstalling,operatingorperforminganymaintenance.

InmostcasesFLOWSERVEvalves,actuatorsandaccessoriesaredesignedforspecificapplicationswithregardtomedium,pressureandtemperature.Forthisreasontheyshouldnotbeusedinotherap-plicationswithoutfirstcontactingthemanufacturer.

1.2 Terms concerning safety

The safety termsDANGER, WARNING, CAUTIONandNOTEareusedintheseinstructionstohighlightparticulardangersand/ortoprovideadditionalinfor-mationonaspectsthatmaynotbereadilyapparent.

DANGER: indicates that death, severe personal injury and/or substantial property damage will occur if proper precautions are not taken.

WARNING: indicates that death, severe personal injury and/or substantial property damage can occur if proper precautions are not taken.

CAUTION:indicates that minor personal injury and/or property damage can occur if proper precautions are not taken.

NOTE: indicates and provides additional technical information, which may not be very obvious even to qualified personnel.

Compliancewith other, not particularly emphasisednotes,withregardtotransport,assembly,operationandmaintenanceandwithregardtotechnicaldocumentation(e.g.intheoperatinginstruction,productdocumentationorontheproductitself)isessential,inordertoavoidfaults,whichinthemselvesmightdirectlyorindirectlycauseseverepersonalinjuryorpropertydamage.

1.3 Protective clothing

FLOWSERVEproducts are often used in problematicapplications(e.g.extremelyhighpressures,dangerous,toxicorcorrosivemediums).Inparticularvalveswithbellows seals point to such applications.When per-formingservice,inspectionorrepairoperationsalwaysensure,thatthevalveandactuatoraredepressurisedandthatthevalvehasbeencleanedandisfreefromharmfulsubstances. In such casespayparticular attention topersonalprotection(protectiveclothing,gloves,glassesetc.).

1.4 Qualified personnel

Qualifiedpersonnelarepeoplewho,onaccountoftheirtraining,experienceandinstructionandtheirknowledgeofrelevantstandards,specifications,accidentpreventionregulationsandoperatingconditions,havebeenauthor-isedbythoseresponsibleforthesafetyoftheplanttoperformthenecessaryworkandwhocanrecogniseandavoidpossibledangers.

1.5 Installation

DANGER: Before installation check the order-no., serial-no. and/or the tag-no. to ensure that the valve/actuator is correct for the intended application.

Donotinsulateextensionsthatareprovidedforhotorcoldservices.

Pipelinesmustbecorrectlyalignedtoensurethatthevalveisnotfittedundertension.

Fireprotectionmustbeprovidedbytheuser.

1.6 Spare parts

UseonlyFLOWSERVEoriginalspareparts.FLOWSERVEcannotacceptresponsibilityforanydamagesthatoc-curfromusingsparepartsorfasteningmaterialsfromothermanufactures.IfFLOWSERVEproducts(especiallysealingmaterials)havebeenonstoreforlongerperiodschecktheseforcorrosionordeteriorationbeforeusingtheseproducts.FireprotectionforFLOWSERVEproductsmustbeprovidedbytheenduser.

STOP!

INDEX

1 Using Flowserve Valves, Actuators and Ac-cessories Correctly

2 Installation3 Travel Stop Adjustments4 Maintenance Instructions5 Field Conversion from Fail CW to Fail CCW6 Torque Shaft7 Long Term Storage

3


1.7 Service / repair

To avoid possible injury to personnel or damage toproducts, safety termsmust be strictly adhered to.Modifying thisproduct,substitutingnonfactoryparts,orusingmaintenanceproceduresother thanoutlinedinthisinstructioncoulddrasticallyaffectperformanceandbehazardoustopersonnelandequipment,andmayvoid existingwarranties. Between actuator and valvethere aremovingparts. To avoid injury FLOWSERVEprovides pinch-point-protection in the formof coverplates,especiallywhereside-mountedpositionersarefitted.Iftheseplatesareremovedforinspection,serviceorrepairspecialattentionisrequired.Aftercompletingworkthecoverplatesmustberefitted.

Apartfromtheoperatinginstructionsandtheobligatoryaccident prevention directives valid in the country ofuse, all recognised regulations for safety and goodengineeringpracticesmustbefollowed.

WARNING: Before products are returned to FLOWSERVE for repair or service FLOWSERVE must be provided with a certificate which confirms that the product has been decontaminated and is clean. FLOWSERVE will not accept deliveries if a certificate has not been pro-vided (a form can be obtained from FLOWSERVE).

1.8 Storage

InmostcasesFLOWSERVEproductsaremanufacturedfromstainlesssteel.Productsnotmanufacturedfromstainlesssteelareprovidedwithanepoxyresincoating.ThismeansthatFLOWSERVEproductsarewellprotectedfrom corrosion.Nevertheless FLOWSERVE productsmustbestoredadequatelyinaclean,dryenvironment.Plastic caps are fitted to protect the flange faces toprevent the ingress of foreignmaterials. These capsshouldnotberemoveduntilthevalveisactuallymountedintothesystem.

1.9 Valve and actuator variations

Theseinstructionscannotclaimtocoveralldetailsofall possible product variations, nor can they provideinformationforeverypossibleexampleofinstallation,operation or maintenance. This means that theinstructions normally include only the directions tobe followed by qualified personalwhere the productisbeingused for isdefinedpurpose. If thereareanyuncertaintiesinthisrespectparticularlyintheeventofmissingproduct-relatedinformation,clarificationmustbeobtainedviatheappropriateFLOWSERVEsalesoffice.

1.10 Unpacking

Each delivery includes a packing slip. Whenunpacking,checkalldeliveredvalvesandaccessoriesusingthispackingslip.

Reporttransportdamagetothecarrierimmediately.

In case of discrepancies, contact your nearestFLOWSERVElocation.

STOP!

4


Introduction TheRGSeriesisafullymodulardesign,scotch-yokeac-

tuator;withtorquerangefrom2000Nmto250,000Nm(2,800 in-Lbs to 2.2M in-Lbs) in eightmodels, RG1through RG8, with maximum actuator torque andmountingbaseincompliancewithISO5211.

TheRGseriesSpringReturnActuators,incontrastwithR-series,usePull-to-Compressthespringdesign.

2 Installation

2.1 All actuators are factory lubricated for life, but stillshouldbeprotected fromtheelementsandstored in-doorsuntilreadyforuse.Theportsoftheactuatorarepluggedassupplied from the factory. If actuatorsarestoredforalongperiodoftimepriortoinstallation,fol-lowtheLongTermStorageinstructions.

2.2 Prior to assembly, manually open and close valve (ifpossible), to ensure freeness of operation. Be sure,valveandAutomaxactuatorrotateinthesamedirectionandareinthesameposition(i.e.,valveclosed,actuatorclosed).

2.3 Check the mounting surfaces, the stem adaptor andthebrackettoassureproperfit.Securethevalveintheclosedpositionwiththestemvertical.Boltthebracketto the valve and place the stem adaptor on the valvestem.Positiontheactuatoroverthevalveandlower,toengage the stem adaptor to the actuators bore. Con-tinue to lower until the actuator seats on the bracketmounting surface. In order to align the bolt holes, itmaybenecessarytoloosenthevalve-to-bracketboltingtoallowmoreplay inthebracket.Themountingboltsshouldeasilyfitintotheboltholeswithoutanybinding.Ifneeded,turnorstroketheactuatorafewdegreesand/oradjusttheactuatortravelstops.Bolttheactuatortothebracket.

2.4 Adjustthetravelstopboltsoftheactuatorfortheproperopenandclosedvalvepositions,pervalvemanufactur-ersrecommendations.Pneumaticallystroketheactua-

torseveraltimestoassureproperoperation.Thestemadaptorshouldnotbindduringoperation.Iftheactua-tor isequippedwithanUltraSwitchorotheraccesso-ries,adjustthematthistime.

2.5 Toprolongactuatorlifeuseonlyclean,dryplantair.Lu-bricatedairisnotrequired,howeveritisrecommendedparticularlyforhighcycleapplications.Donotuselubri-catedairwithpositioners.

CAUTION! Lifting bolts holes on the actuator are for lifting the actuator modules only with eye bolts, not a complete valve and actuator assembly.

3 Travel Stop Adjustments

Allactuatedvalvesrequireaccuratetravel-stopadjust-ments at both ends of the stroke to obtain optimumperformance and valve seat life. The accumulation oftolerancesintheadaptionofactuatorstovalvesissuchthattheremustbearangeofadjustmentsforbothendsofthestroketoachieveoptimumperformance.

TheRGactuatorshavetravelstopadjustmentsinboththe clockwise and counter-clockwise directions. The+/-3degreeadjustmentfeatureprovidesshaftrotationfrom84to96degrees.

4 Maintenance Instructions

4.1 Disassembly Instructions

4.1.1 Disconnectallairandelectricalsuppliesfromactuator.

4.1.2 Removeallaccessoriesfromactuatoranddismountac-tuatorfromvalve.

4.1.3 DrawingReferences:Drg#263188,Drg#263189

4.2 Spring Module (see Fig.: 1)

CAUTION! Personal Injury may result if Step 2 is at-tempted before Step I is completed.

Fig.: 1 Spring Module

4 2

4 2

CW

CWW

Actuator Configuration

5


4.2.1 Applyairpressuretoport2onFCW(port4onFCCW)actuator, raising pressure slowly, enough to releasespringpressurefromtheStopBolt(17).BackofffullybothStopBoltsontheTorqueModuleandreleaseairpressure.Thiswillrelievethespringpreload.

4.2.2 TheSpringModule isweldedintoan integralcompo-nentandcannotbedisassembled.Toremovefromac-tuator,removeSpringModuleendcover(60)andus-inganextendedsocketspanner/tubespanner,unscrewanddisconnectthePullRod(54)fromtheTorqueMod-ule.

CAUTION! Take extra care not to drop the socket/small

tools inside the spring can. Small objects dropped in-side may fall through the spring guide and get stuck in the spring coils.

NOTE: A retainer ring on the threaded side of the Pull Rod stops it from being removed completely from the Spring Module.

4.2.3 SlingtheSpringModuleusingliftingboltsontheMod-uleandremovetheAdapterNuts(19)andLockwash-ers(20).SpringModulecannowberemovedfromtheTorqueModule.

4.2.4 BeforereassemblingSpringModuletobody,makesurestud threadsarecleanof anydirt, shavings,orotherdebris.Cleanthreadswithragandsolventifrequired,andlubricatethreadswithananti-seizecompound.

NOTE: Support the Spring Module during removal so as not to damage the Pull Rod and the studs threads.

4.3 Pressure Module

4.3.1 Pressurizerodendofcylinder,enoughtostroketoend.Ventouttheairfromthecylinder.

4.3.2 Remove end cover plate/plug from pressure moduleandunscrewthepistonrodwithasocket/tubespanner.

4.3.3 Slingthepressuremodulefromtheeyebolts,removetheAdaptorStudNuts(19)andLockwashers(20)andtakethePressuremoduleofftheTorquemodule.

4.3.4 RemovetheTieRodNuts(37),theEndPlate(33)andTieRods(36).

4.3.5 SlidetheCylinder(34)overandoffthePiston(38),be-ingcarefulnottoscratchordentthehonedandchromeplatedsurfaceofthecylinder.

4.3.6 Slide out the Piston- Piston Rod assembly off theAdapterPlate(32).

4.3.7 Remove theRetainerRing(40)and take theSplitCollar(39)offthePistonRod(35).PullthePistonRodoffthePiston.

4.4 Torque Module (Body Group)

NOTE: Spring Module and Pressure Module must be removed before disassembling the Torque Module

4.4.1 RemovetheIndicator(29),iffitted.

4.4.2 RemoveTopCoverBolts(65)andthecover,O-ringandtheNamurShaftAssembly(15).

4.4.3 RemoveBodyCoverBolts,LockWashers(26)andThreadPlugs(31).

4.4.4 UsingtheremovedBodyCoverBolts,jackopenthecoverby threading in thebolts in the two tappedholesuntilcoverisseparatedenoughtopryapart.Takecare to jack theboltsevenly,as thecover ispositionedby four dowel pins, and cross loadingmaycausebending/breakageofpinsonsmallac-tuatorsizes.

4.4.5 GentlytapwithPU/PlastichammerandpullofftheGuideBar(2)fromthebody.

4.4.6 LiftYokeSubAssemblyoutofbodybore.

4.4.7 RemoveDelrinPlate(7)retainingscrews.PullouttheYokePin(9),andSliderBlock(10).

4.4.8 SlideouttheGuideBlock(11)outoftheYokeandremovethebottomSliderBlock.

4.4.9 Remove Yoke Seals (5) and Yoke Bushing (4) ifwornout/damaged.

4.5 Reassembly Instructions

4.5.1 Inspect all parts for wear and replace any wornparts as needed. Normally, all O-rings and sealsshouldbereplacedwhenreassemblinganactuator.Useseallubricant,DowCorning55foralllubrica-tioninthepressuregroup.

Ensure the replacement seals are suitable for theservicetemperature.

4.5.2 TheMetalbackedbronze-ptfebearingsmaybein-spectedandassessedforreplacement,referringtoguide(seeFig.:2)ontheusefulresiduallife

Toreplacethebearings,theunitorthesubassembly

6


needstobebroughtintoworkshop,withsuitablefacilities to carefully remove the bearing withoutdamaging the housing and to press new bearingwithproperpressing toolspermanufacturers in-structionsandapress.

Donotattempttopryoutanyofthebearingsintheactuatorwithsharptools,orhammerinareplace-mentbearing.

4.5.3 Clean thoroughly and grease all Torque Modulecomponents with NLGI grade 2 multi-purposegrease.UseShellAlvaniaEP2forStandardActua-tors.Forlowtemperatureunits,useDow55greaseorequivalent.

4.5.4 Reverse thedisassemblyprocedures to reassem-ble.Applyrecommendedtorque,refertorquechart,ontheTieRodLocknuts,theMountingFlangeNuts,theBodyCover&TopPlatebolts,thePistonRod/PullRod(seetablesonpafe7.

The Tie Rod and Mounting Flange Stud threadsshouldbelubricatedwithLocktiteAntiseize,77164orequivalent.

ThePull/PistonRodthreadsandcoverboltstobetightenedwiththreadlockcompound,Loctite243orequivalent.

4.5.5 Refer to parts andmaterials drawings for all re-quiredspareparts(seepages9+10).

Test the actuator for smooth operation and airleakageatservicepressurebeforereinstallingintoservice.

5 Field Conversion from Fail CW to Fail CCW (ForSpringReturnActuators)

TheRGspringreturnactuatorcanbeconvertedfromfailCWtofailCCWeasily,withouthavingtoremovetheTorqueModule,mounting bracket, stem adaptor andthe shaft driven accessories, mounted on the centrebody.SimplyswitchthepositionsofthePressureandSpringModules.

ActuatorDesignationneedstobesuitablychangedonthenameplate.

Followstepsbelow,ifoperatingthevalveispermitted:

5.1 Apply enough air pressure to the actuator to relievespringloadonthestopperbolt.

5.2 BackoffboththestopperboltsontheTorqueModuleanddepressurizetheactuator.

5.3 RemoveSpringModule end cover, unscrew and dis-connecttheSpringPullRod.

5.4 Pressurize rod end of Pressure Module, to end ofstroke. Depressurize and remove the end cover/plugon the PressureModule. Use a tube/socket spanner,loosenpistonrodbyoneturn,fitbackendcover/plugandpressurizecapend,enoughtostroketoend.De-pressurize, removeendcover/plug and fullyunscrewanddisconnectthepistonrodfromtheTorqueModule.

5.5 RemovethePressureandSpringModulesofftheTorqueModulebyremovingthemountingflangestudnuts.

Fig.: 2 Residual Life Guide

7


5.6 Switchthepositionsofthetwomodules,connectthePressureModulefirstandensuretheportsareonthestopperboltssideofactuator.Threadinandtorquethepiston rod to recommendedvalue, fitbackendcoverplate/plug.Pressurizecapendtostroketheactuatortoend.

5.7 ReinstallSpringModule,torquethepullrodtorecom-mendedvalue,fitendcoverback.Pressurizerodendofcylinderandadjustthestopperbolts.

5.8 Checkactuatorforproperoperation,attheratedwork-ingpressure.

NOTE: If operation of valve is not permitted, during changing of the Fail Safe direction, then the actuator needs to be taken off the valve and reconfigured, as explained above.

Fastner Model RG1 RG2 RG3 RG4 RG5 RG6 RG7 RG8

Mounting Flange Nut

ThreadSize M8 M10 M12 M12 M16 M16

Tightningtorque

ftLb 10-12 18-22 30-35 30-35 80-90 80-90 140-160 280-320

kgm 1.4-1.7 2.5-3.0 4.2-4.8 4.2-4.8 11.0-12.5 11.0-12.5 19-22 38-44

Body Cover Bolts


Tightningtorque

ftLb 3-5 3-5 10-14 10-14 18-22 18-22 26-30 26-30

kgm 0.5-0.7 0.5-0.7 1.4-2.0 1.4-2.0 2.5-3.0 2.5-3.0 3.5-4.0 3.5-4.0

Top Plate Bolts


Tightningtorque

ftLb 3-5 3-5 10-14 10-14 18-22 18-22 22-26 22-26

kgm 0.5-0.7 0.5-0.7 1.4-2.0 1.4-2.0 2.5-3.0 2.5-3.0 3.0-3.5 3.0-3.5

Stopper Bolt Locknuts

ThreadSize M16 M20 M20 M30 M36 M48 M56 M64

Tightningtorque

ftLb 75-85 90-100 90-100 100-110 120-130 140-150 175-200 200-240

kgm 10-12 12-14 12-14 14-15 16-18 19-21 25-28 28-33

Piston Rod/Pull Rod

HexSize,A/F 18 18 24 30 36 46 65 85

Tightningtorque

ftLb 30-35 35-45 50-60 60-75 75-85 100-140 175-200 200-240

kgm 4-5 4-5 7-8 8-10 10-12 13-19 24-28 28-33

Bolt Torques

Cylinder Size (in.) 5 6 7 8 9 10 12 14 16 18 20 22 24 28 32 32T 36 36T 40

Tie Rod Nut Size M10 M10 M10 M10 M12 M12 M16 M16 M20 M20 M24 M24 M30 M30 M30 M36 M30 M36 M30

Tightening Torque (ft Lb)

8 11 14 19 28 34 64 88 143 181 268 325 485 330 431 1028 564 876 673

Tie Rod Nut Torque

8


How to Order

SeriesBody Size

Cylinder Size ActionSpring Module

Torque Pattern (Yoke)

Sealing/Temp Manual Override Material/ Coatings Options

RG

1 05 06 07 08 09 10 12 DA- DoubleActing SingleCylinder 0 S- Symmetrical N- Nitrile,-20Fto180F

0- None GE- GreyEpoxy(std) 00- None

2 08 09 10 12 14 16 DD- DoubleActing DualCylinder 1 C- Canted G- SandwichDeclutchGbox PO- PrimerOnly TC- Ext.Stopper-CW

3 10 12 14 16 18 20 2 H- HighTemp(Viton),0Fto300F

J- Jackscrew WE- WhiteEpoxy TO- Ext.Stopper-CCW

4 14 16 18 20 22 24 3 D- BevelGearJackscrew SP- Specials TB- Ext.Stopper-BothDir

5 16 18 20 22 24 28 4 L- LowTemp,(material)-55Fto180F

H- Hydraulic S xxx- Specialscode

6 18 20 22 24 28 32 36 SR- SpringReturn FailCW 5

7 24 28 32 36 40 SO- SpringReturn FailCCW 6

8 28 32 36 40 7

8

Model Code Example:

RG 5 22 SR 6 C N D GE TC

Actuator Designation

Module Weights (approx.)Module Weights, Lbs (kgs)

ModelTorque Module

Pressure Module Spring Module5 6 7 8 9 10 12 14 16 18 20 22 24 28 32 36 40 1 2 3 4 5 6 7 8

RG1 68(31)

31(14)

35(16)

47(22)

53(24)

66(30)

94(43)

139(63)

88(40)

97(44)

101(46)

103(47)

106(48)

114(52)

119(54)

119(54)

RG2 99(45)

56(25)

69(32)

99(45)

143(65)

209(95)

320(145)

128(58)

145(66)

154(70)

158(72)

158(72)

172(78)

180(82)

186(85)

RG3 143(65)

100(45)

142(64)

200(91)

318(145)

406(185)

561(255)

226(103)

260(118)

267(121)

269(122)

276(125)

330(150)

321(146)

RG4 295(134)

217(99)

339(154)

427(194)

586(266)

741(337)

942(428)

402(183)

442(201)

462(210)

477(217)

510(232)

545(248)

565(257)

581(254)

RG5 510(231)

356(162)

455(207)

610(277)

853(388)

994(452)

1634(743)

639(290)

737(335)

770(350)

783(356)

901(410)

955(434)

RG6 933(423)

493(224)

616(280)

861(391)

1051(478)

1732(787)

2321(1055)

3044(1384)

1283(583)

1738(790)

1671(760)

1730(787)

2061(937)

1995(907)

RG7 1881(853)

1824(829)

2411(1096)

3156(1435)

3913(1779)

2283(1038)

2946(1339)

3043(1383)

3177(1444)

3630(1650)

3709(1686)

RG8 3718(1686)

2165(984)

2819(1282)

3372(1533)

4159(1891

4627(2103)

5800(2637)

6113(2779)

6227(2830)

7111(3232)

7423(3374)

Body SizeMax. Cylinder Size

DA DD SR/SO

1 9 8 12

2 12 10 16

3 16 14 20

4 20 16 24

5 22 20 28

6 28 24 36

7 36 32 40

8 40 40 40

9


Drawing # 263188

C

G G

16 17

181920

3233

3436

37

3844

4346 48 62 26 65

5051

52

53

5758

59 60

61

23

3165

64

8

49

54

DET

AIL

A

42

45

DET

AIL

B

56 63

68

67 19

DET

AIL

C

353940

47

SEC

TIO

N G

-G

12

3

45 67 6

5

12 13

1415

21 30 2224

26 66 28 29

41

91011

27

REV

ISIO

NS

ECO

NO

REV

ZON

ELT

R

DES

CRI

PTIO

ND

ATE

CH

K

1PU

LL R

OD

UPD

ATE

D11

/24/

09SP

ITEM

N

O.

DES

CRI

PTIO

NM

ATE

RIA

LQ

TY.

1C

ENTE

R BO

DY

AST

M A

-536

Gr 6

0-40

-18

12

GU

IDE

ROD

STEE

L A

ISI 4

340

13

CO

VER

AST

M A

-536

Gr 6

0-40

-18

14

BUSH

PTFE

BRO

NZE

25

O-R

ING

BUN

A -

N2

6YO

KEA

STM

A-5

36 G

r 60-

40-1

81

7 R

ETA

INER

DEL

RIN

28

SCRE

WST

EEL

Gr 8

.812

9PI

NST

EEL

AIS

I 434

01

10 S

LID

ER B

LOC

KB-

150-

C62

400

211

GU

IDE

BLO

CK

STEE

L A

-148

Gr.

90-6

01

12BU

SHPT

FE B

RON

ZE2

13BU

SHPT

FE B

RON

ZE2

14PL

ATE

UN

S S3

1600

115

SHA

FTU

NS

S316

001

16N

UT

STEE

L G

r 82

17ST

OP

BOLT

STEE

L G

r 8.8

2

ITEM

N

O.

DES

CRI

PTIO

NM

ATE

RIA

LQ

TY.

18ST

UD

STEE

L G

r 8.8

1219

NU

TST

EEL

Gr 8

1220

WA

SHER

STEE

L12

21O

-RIN

GBU

NA

- N

122

O R

ING

BUN

A -

N1

23O

-RIN

GBU

NA

- N

224

BUSH

PTFE

BRO

NZE

125

PIN

SA-1

93-B

74

26 W

ASH

ERST

EEL

1827

CO

VER

STE

EL A

-36

128

SCRE

WST

EEL

Gr 8

.81

29 IN

DIC

ATO

RPL

AST

IC1

30O

-RIN

GBU

NA

- N

131

SCRE

WST

EEL

Gr 8

.82

32A

DA

PTO

RA

STM

A-5

36 G

r 60-

40-1

81

33EN

D C

AP

AST

M A

-536

Gr 6

0-40

-18

134

CYL

IND

ERSA

-106

-B1

ITEM

N

O.

DES

CRI

PTIO

NM

ATE

RIA

LQ

TY.

35 P

ISTO

N R

OD

STEE

L A

ISI 4

340

136

TIE

ROD

SA-1

93-B

74

37LO

CKN

UT

STEE

L G

r 84

38PI

STO

NA

STM

A-5

36 G

r 60-

40-1

81

39SP

LIT

CO

LLA

RSA

E-41

404

40RE

T RI

NG

UN

S S3

1600

141

EYE

BO

LTST

EEL

242

BUSH

PTFE

BRO

NZE

143

QU

AD

SEA

LRU

BBER

144

WEA

R RI

NG

CA

RBO

N F

ILLE

D P

TFE

245

QU

AD

SEA

LRU

BBER

146

O-R

ING

BUN

A -

N2

47O

-RIN

GBU

NA

- N

148

CO

VER

PLA

TE S

TEEL

A-3

61

49O

-RIN

GBU

NA

- N

150

AD

APT

OR

SA -2

16-W

CB

151

PIPE

STEE

L SA

-53-

B1

ITEM

N

O.

DES

CRI

PTIO

NM

ATE

RIA

LQ

TY.

52EN

D C

AP

SA

-216

-WC

B1

53SP

RIN

G G

UID

ESA

-216

-WC

B1

54PU

LL R

OD

STEE

L A

ISI 4

340

155

EYE

BO

LTST

EEL

256

BUSH

PTFE

BRO

NZE

157

SPRI

NG

AST

M A

689

516

OH

158

SPRI

NG

AST

M A

689

516

OH

159

BOLT

M16

STEE

L G

r 8.8

460

CO

VER

STE

EL A

-36

161

WA

SHER

STEE

L4

62O

-RIN

GBU

NA

- N

163

O-R

ING

BUN

A -

N1

64BU

TTO

NU

HM

WPE

665

BOLT

STEE

L G

r 8.8

2466

PIN

CA

RBO

N S

TEEL

167

O-R

ING

BUN

A -

N2

68RE

T RI

NG

UN

S S3

1600

1

87

65

43

21

ABCD

12

34

56

78

D C B ATM

HD

AC

TUA

TOR,

RG

SER

IES

KNS

UN

LESS

OTH

ERW

ISE

SPEC

IFIE

DD

IMEN

SIO

NS

ARE

IN M

ILLI

MET

ERS

AN

D A

RE A

FTER

PLA

TIN

G.

X. .X .XX

1 .75

.25

THIR

D A

NG

LE P

ROJE

CTI

ON

CO

PYRI

GH

T - F

LOW

SERV

E C

ORP

ORA

TIO

NA

LL R

IGH

TS R

ESER

VED

INFO

RMA

TIO

N IN

TH

IS D

OC

UM

ENT

IS C

ON

FID

ENTI

AL

AN

D IS

TH

EEX

CLU

SIV

E PR

OPE

RTY

OF

FLO

WSE

RVE

CO

RPO

RATI

ON

, DEL

IVER

YO

F TH

IS D

OC

UM

ENT

OR

AN

Y C

OPY

TH

EREO

F O

R D

ISC

LOSU

RE O

FSU

CH

INFO

RMA

TIO

N T

O U

NA

UTH

ORI

ZED

PER

SON

S IS

FO

RBID

DEN

.

DIM

ENSI

ON

S W

ITH

T

OLE

RAN

CES

ARE

IDEA

L D

ESIG

N D

IMEN

SIO

NS.

ALL

DIM

ENSI

ON

S A

ND

TO

LERA

NC

ESPE

R A

NSI

Y14

.5M

- 19

82

DO

NO

T SC

ALE

AN

GLE

S 1

/2

DRA

WIN

G N

O.

ENG

BY

CH

K BY

DRW

BY

SP

NEX

T A

SSY

REF

LAYO

UT

R U

NSP

EC R

AD

II

DES

IGN

FIL

E

MA

CH

INE

FIN

ISH

Ra

MA

TERI

AL

SIZE

6/10

/09

6/10

/09

D1REV

SCA

LESH

EET

1:10

1 O

F 1

Flo

w C

ont

rol D

ivisi

on

BGL

SITE

2631

88

3D12

Q1S

\SKA

LAN

IDH

I (11

/24/

2009

7:0

2:06

PM

)

10


Drawing # 263189

46

44*

3930

36

40#

2

336

1

48

54#

61*

57

58

50

6251

49

16 17

5*

14

24

15

26

25

28*

42*

31

35

32

12#

13#

64

23

27

34

67

59

60*

7

11

3

53

65

20*

29

19*

5321

*

53

65

47*

38

8

4#

5*

1824

67

41*

45*

9

4#

39

43*

37

37

37

10

1062

61

63*

63*

52

68

NO

TE:

SEA

L KI

TS C

ON

TAIN

* M

ARK

ED P

ART

S1.

SERV

ICE

KITS

CO

NTA

INS #

MA

RKED

PA

RTS

2.

REV

ISIO

NS

ECO

NO

REV

ZON

ELT

R

DES

CRI

PTIO

ND

ATE

CH

K

12

DPU

LL R

OD

UPD

ATE

D11

/24/

09SP

ITEM

N

O.

SHO

RTD

ESC

MA

TERI

AL

QTY

.

1C

ENTE

R BO

DY

DU

CTI

LE IR

ON

12

GU

IDE

ROD

ALL

OY

STEE

L1

3C

OV

ERD

UC

TILE

IRO

N1

4#BU

SHPT

FE B

RON

ZE2

5*O

-RIN

GBU

NA

- N

26

YOKE

DU

CTI

LE IR

ON

17

RETA

INER

PLA

STIC

28

SCRE

W S

TEEL

129

PIN

ALL

OY

STEE

L1

10SL

IDER

BLK

AL

BRO

NZE

211

GU

IDE

BLO

CK

DU

CTI

LE IR

ON

112

#BU

SHPT

FE B

RON

ZE2

13#

BUSH

PTFE

BRO

NZE

214

PLA

TEST

AIN

LESS

STE

EL1

15SH

AFT

STA

INLE

SS S

TEEL

116

NU

TST

EEL

217

STO

P BO

LT S

TEEL

2

ITEM

N

O.

SHO

RTD

ESC

MA

TERI

AL

QTY

.

18ST

UD

STE

EL12

19*

O-R

ING

BUN

A -

N1

20*

O R

ING

BUN

A -

N1

21*

O-R

ING

BUN

A -

N2

22#

BUSH

PTFE

BRO

NZE

123

PIN

ALL

OY

STEE

L4

24W

ASH

ER S

TEEL

1225

CO

VER

CA

RBO

N S

TEEL

126

SCRE

WPL

ATE

D S

TEEL

127

WO

RCES

TER

PLA

STIC

128

*O

-RIN

GBU

NA

- N

129

SCRE

WA

LLO

Y ST

EEL

230

AD

APT

OR

DU

CTI

LE IR

ON

131

CYL

IND

ERC

ARB

ON

STE

EL1

32EN

D C

AP

DU

CTI

LE IR

ON

133

PIS

TON

RO

DA

LLO

Y ST

EEL

134

TIE

ROD

ALL

OY

STEE

L4

ITEM

N

O.

SHO

RTD

ESC

MA

TERI

AL

QTY

.

35LO

CKN

UT

PLA

TED

STE

EL4

36PI

STO

ND

UC

TILE

IRO

N1

37SP

LIT

CO

LLA

R S

TEEL

438

RET

RIN

G S

TEEL

139

BOLT

STE

EL2

40#

BUSH

PTFE

BRO

NZE

141

* Q

UA

DSE

AL

RUBB

ER1

42*

WEA

R RI

NG

C F

ILLE

D P

TFE

243

*Q

UA

D S

EAL

RUBB

ER1

44*

O-R

ING

BUN

A -

N2

45*

O-R

ING

BUN

A -

N1

46C

OV

ER P

LATE

CA

RBO

N S

TEEL

147

*O

-RIN

GBU

NA

- N

148

AD

APT

OR

CA

RBO

N S

TEEL

149

PIPE

CA

RBO

N S

TEEL

150

END

CA

PC

ARB

ON

STE

EL1

51SP

RIN

G G

UID

ED

UC

TILE

IRO

N1

ITEM

N

O.

SHO

RTD

ESC

MA

TERI

AL

QTY

.

52PU

LL R

OD

ALL

OY

STEE

L1

53BO

LT24

54#

BUSH

PTFE

BRO

NZE

155

SPRI

NG

ALL

OY

STEE

L1

56SP

RIN

GA

LLO

Y ST

EEL

157

BOLT

STE

EL4

58C

OV

ERC

ARB

ON

STE

EL1

59W

ASH

ER S

TEEL

460

*O

-RIN

GBU

NA

- N

161

*O

-RIN

GBU

NA

- N

162

BUTT

ON

PLA

STIC

663

*O

-RIN

GBU

NA

- N

264

NU

T S

TEEL

1265

WA

SHER

STEE

L18

66RE

T RI

NG

STA

INLE

SS S

TEEL

167

BOLT

STE

EL2

68 P

INST

EEL

1

87

65

43

21

ABCD

12

34

56

78

D C B ATM

UN

LESS

OTH

ERW

ISE

SPEC

IFIE

DD

IMEN

SIO

NS

ARE

IN M

ILLI

MET

ERS

AN

D A

RE A

FTER

PLA

TIN

G.

X. .X .XX

1 .75

.25

THIR

D A

NG

LE P

ROJE

CTI

ON

CO

PYRI

GH

T - F

LOW

SERV

E C

ORP

ORA

TIO

NA

LL R

IGH

TS R

ESER

VED

INFO

RMA

TIO

N IN

TH

IS D

OC

UM

ENT

IS C

ON

FID

ENTI

AL

AN

D IS

TH

EEX

CLU

SIV

E PR

OPE

RTY

OF

FLO

WSE

RVE

CO

RPO

RATI

ON

, DEL

IVER

YO

F TH

IS D

OC

UM

ENT

OR

AN

Y C

OPY

TH

EREO

F O

R D

ISC

LOSU

RE O

FSU

CH

INFO

RMA

TIO

N T

O U

NA

UTH

ORI

ZED

PER

SON

S IS

FO

RBID

DEN

.

DIM

ENSI

ON

S W

ITH

T

OLE

RAN

CES

ARE

IDEA

L D

ESIG

N D

IMEN

SIO

NS.

ALL

DIM

ENSI

ON

S A

ND

TO

LERA

NC

ESPE

R A

NSI

Y14

.5M

- 19

82

DO

NO

T SC

ALE

AN

GLE

S 1

/2

DRA

WIN

G N

O.

ENG

BY

CH

K BY

DRW

BY

NEX

T A

SSY

REF

LAYO

UT

R U

NSP

EC R

AD

II

DES

IGN

FIL

E

MA

CH

INE

FIN

ISH

Ra

MA

TERI

AL

SIZE

03/3

0/09

03/3

0/09

D1REV

SCA

LESH

EET

1:20

1 O

F 1

Flo

w C

ont

rol D

ivisi

on

BGL

SITE

EXPL

OD

ED V

IEW

, HD

AC

TUA

TOR,

RG

SER

IES

KNS

SP

2631

89

11


7 Long Term Storage

Itisrecommendedtotakeprecautionsandcertainmeasureswhenstoringtheactuatorsforextendedperiodsoftime,morethan4monthstotwoyears.

Potentialproblemsandrecommendedprotectionsareasbelow:

6 Torque Shaft

Theoutputshaftisrecommendedtohavetwokeyen-gagements.Shaftmaterialshallbealloysteelwithmini-mum yield strength of 85,000psi. The recommendedhardnessofkeysis25-28HRc.

Recommendedengagementlengthofthekeysisasbe-low(seeFig.:3).

Model Lk (mm) Lo (mm)

RG1 165 180

RG2 195 210

RG3 200 215

RG4 255 270

RG5 300 315

RG6 350 375

RG7 500 515

RG8 585 610

Potential Problem Protection

Waterentryintopneumaticcylinder,degradesthecylinder,par-ticularlyinsalineorcorrosiveenvironment.Temperatureswingscausecondensationinsidecylinders

Storeactuatorinclean,dryandprotectedwarehouse,orun-derventilateddustcover.

Plugallportsafterpurgingwithdryinstrumentairornitro-gen.

Storevertical,toavoidsealset.

Sealcompressionset Cycleactuator5-6timeswithcleandryinstrumentairornitro-gen,every3months.

Degradationofseals inexcessivelycorrosiveorhotenviron-ments

Do not store in locations subjecting the actuator to tem-peraturesinexcessofsealrating.StdsealsareNitrile,maxtemp180degF.

Donotstoreinenvironmentsharmfultoresilientseals.

Physicaldamagetoactuatororaccessories. Storeactuatorassemblyonskid,offthefloor,outofpathways.

Inspecttheprotectionsevery3monthsandrecordinspectionresults.

Fig.: 3 Key Length

LkLo

12


Alldatasubjecttochangewithoutnotice12.2009FlowserveCorporation.FlowserveandKmmeraretrademarksofFlowserveCorporation

Contact:

FlowserveCorporationhasestablishedindustryleadershipinthedesignandmanufactureofitsproducts.WhenproperlyselectedthisFlowserveproductisdesignedtoperformitsintendedfunctionsafelyduringitsusefullife.However,thepurchaseroruserofFlowserveproductsshouldbeawarethatFlowserveproductsmightbeusedinnumerousapplicationsunderawidevarietyofindustrialserviceconditions.AlthoughFlowservecan(andoftendoes)providegeneralguidelines,itcannotprovidespecificdataandwarningsforallpossibleapplications.Thepurchaser/usermustthereforeassumetheultimateresponsibilityforthepropersizingandselection,installation,operation,andmaintenanceofFlowserveproducts.Thepurchaser/usershouldreadandunderstandtheInstallationOperationMaintenance(IOM)instructionsincludedwiththeproduct,andtrainitsemployeesandcontractorsinthesafeuseofFlowserveproductsinconnectionwiththespecificapplication.

Whiletheinformationandspecificationscontainedinthisliteraturearebelievedtobeaccuratetheyaresuppliedforinformativepurposesonlyandshouldnotbeconsideredcertifiedorasaguaranteeofsatisfactoryresultsbyreliancethereon.Nothingcontainedhereinistobeconstruedasawarrantyorguarantee,expressedorimplied,regardinganymatterwithrespecttothisproduct.BecauseFlowserveiscontinuallyimprovingandupgradingitsproductdesign,thespecifications,dimensionsandinformationcontainedhereinaresubjecttochangewithoutnotice.Shouldanyquestionariseconcerningtheseprovisions,thepurchaser/usershouldcontactFlowserveCorporationatanyoneofitsworldwideoperationsoroffices.

Flowserve CorporationFlow Control Division1978ForemanDriveCookeville,Tennessee38501USAPhone:+9314324021Fax:+9314325518www.flowserve.com

Flowserve CorporationFlow Control Division1350NorthMountainSpringsParkwaySpringville,Utah84663-0913USAPhone:+8013733028Fax:+8014892228

Flowserve Pte LtdNo.12TuasAvenue20Singapore638824Phone:+6568798900Fax:+6568624940

Flowserve Flow Control (UK) Ltd.BurrellRoadHaywardsHeathWestSussexUnitedKingdomRH161TLPhone:+441444314400Fax:+441444314401

AutomaxImgroRohr2Limburg,Hessen65549GermanyPhone:+49(0)643196610Fax:+49(0)6431966130

Flowserve Ahaus GmbHvon-Braun-Str.19a48683AhausPhone:+492561686-119Fax:+492561686-109

Flowserve Flow Control GmbHActuators and Automation CenterGermanyRudolfPlankStr.2D-76275EttlingenGermanyPhone+49(0)72431030Fax+49(0)7243103222

Flowserve Flow Control Benelux BVRechtzaad174703RCRoosendaalNBNetherlandsPhone:+31165598800Fax:+31165555670

Flowserve Australia Pty LtdFlowControlDivision14DalmoreDriveScoresby,Victoria3179AustrialiaPhone:+61397593300Fax:+61397593301

Flowserve S.R.LViaPrealpi30CormanoMIItalyI-20032Phone:+3902663251Fax:+39026151863

Flowserve do Brasil LtdaRuaTocantins,128-BairroNovaGertiSoCaetanodoSul,SoPaulo09580-130BrazilPhone:+551142316300Fax:+551142316329-423

Unit 01\02\06\07 9FChinaFortuneTowerNo.1568,CenturyAvenue,PudongShanghaiChina200122Phone:+862138654800Fax:+862150811781

Flowserve CorporationNo.35,BaiyuRoadSuzhouIndustrialParkSuzhou 215021, Jiangsu Province,PRCPhone:+86-512-6288-1688Fax:+86-512-6288-8737

iom actuator rg series

Documents

proper precautions

experien installation

safety termsdanger

accessories correctly1

toxi seals point

flowserve valves

intended application