inventor sans steel library - micrographics · the sans steel library for inventor was created as a...
TRANSCRIPT
A B O U TThe SANS Steel library for Inventor was created as a single content centre library which consists of all the standard steel sections as listed by the SABS / SANS South African Standards. The Library easily installs as an additional content centre library.
By having a single library, time is saved by preventing confusion with other library content, and a reduction in time searching for the sections you need. Each library section has its own unique Part Number, Stock Number and File Name, all automatically generated for you.
All properties are mapped to the part’s iProperties which shows up in BOM tables and Parts Lists on your Inventor drawings.
U S A G EOnce installed, the steel sections are available from Inventor’s Content Centre window and from within the Frame Generator window. Please see the SANS Steel Library Setup Instructions page for details on creating a SANS filter in Inventor to make the steel sections easily selectable.
When placing sections, using Inventor’s Content Centre, you can either opt to insert “As Standard” or “As Custom”. When placing it “As Standard”, the filename is generated automatically and a part is created in the project workspace. When placed “As Custom”, you will have the opportunity to specify the filename. Using both methods, you will be asked to specify the length of the section inserted. This value is recorder and used in the filename and as a property and will be visible in the BOM and on the drawing parts lists.
With Frame Generator, these sections can be added using current geometry as reference. Any changes to the reference will automatically update your design.
ANGLESEqual LegsUnequal LegsCold Formed LippedCold Formed Equal LegsCold Formed Unequal LegsCold Formed Unequal Lipped Legs
CHANNELSCold FormedParallel FlangesTaper FlangesCold Formed Lipped
I-BEAMSH-SectionsI-SectionsJoistsIPE’sIPE-AA’s
HOLLOW SECTIONSCircular SectionsCircular Sections (Other)Rectangular SectionsSquare Sections
FLAT BARS
ROUND BARS
OTHERCold Formed Zee’sCold Formed Unequal Zee’sRailsT-sectionsTop Hats
AVA I L A B L E S E C T I O N S
I n ven to r SANS S tee l L i b ra ry
www.mgfx.co.za/tools-for- [email protected]
S E C T I O N I D E N T I F I C A T I O NFormatting for IdentificationStock No. = [Abbreviation] + [Member]Part No. = [Stock No.] + [Length]File Name = Part No.
QTY
100,000 mm
100,000 mm
100,000 mm
100,000 mm
100,000 mm
100,000 mm
100,000 mm
100,000 mm
100,000 mm
100,000 mm
100,000 mm
100,000 mm
100,000 mm
100,000 mm
100,000 mm
100,000 mm
100,000 mm
100,000 mm
100,000 mm
100,000 mm
100,000 mm
100,000 mm
100,000 mm
100,000 mm
100,000 mm
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
STOCK NUMBER
ACF 50x50x3.5
RSA 50x50x4
LAC 75x50x20x3.0
ACF 50x25x3
RSA 65x50x6
CFC 75x40x2
LCC 75x50x20x2.0
PFC 100x50x10
TFC 76x38x6
IPE-AA 100
RSJ 127x76x13
BMS 152x89x16
UC 152x152x23
Ra 10kg/m
TH 75x75x20x2.0
Rbar 60
RndT 51x4.0
RndT 60.3x4.5
RecT 50,8x38,1x4
SqrT 50,8x50,8x2,5
Fbar 40x5
Sbar 40
T 102x133x13
LZC 100x50x20x2.0
LZC 140x45x53x20x2
PART NUMBER
ACF 50x50x3.5-100
RSA 50x50x4-100
LAC 75x50x20x3.0-100
ACF 50x25x3-100
RSA 65x50x6-100
CFC 75x40x2-100
LCC 75x50x20x2.0-100
PFC 100x50x10-100
TFC 76x38x6-100
IPE-AA 100-100
RSJ 127x76x13-100
BMS 152x89x16-100
UC 152x152x23-100
Ra 10kg/m-100
TH 75x75x20x2.0-100
Rbar 60-100
RndT 51x4.0-100
RndT 60.3x4.5-100
RecT 50,8x38,1x4-100
SqrT 50,8x50,8x2,5-100
Fbar 40x5-100
Sbar 40-100
T 102x133x13-100
LZC 100x50x20x2.0-100
LZC 140x45x53x20x2-100
PA R T S L I S T
DESCRIPTION
Angle : Cold Formed
Rolled Steel Angle
Lipped Angle : Cold Formed
Angle : Cold Formed
Rolled Steel Angle
Channel : Cold Formed
Lipped Channel : Cold Formed
Parallel Flange Channel
Taper Flange Channel
IPE-AA 100 Hot Rolled
Rolled Steel Joist (I-Section - Taper Flange)
152x89x16 Hot Rolled
Universal Column
Rails
Top Hat
Round Bar
Round Tube
Round Tube
Rectangular Tube
Square Tube
Flat Bar
Square Bar
T-section
Lipped Zee
Lipped Zee
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18
19 20 22 21 23 24 25