intrumentasi bioteknologiidk121.weblog.esaunggul.ac.id/wp-content/.../ppt-ueu-instrumentasi… ·...
TRANSCRIPT
INTRUMENTASI BIOTEKNOLOGIProgram Studi Bioteknologi
Oleh: Seprianto, S.Pi, M.Si
Meeting 9
Electrophoresis and Gel Documentation System
Tujuan Perkuliahan
• Mahasiswa dapat mengidentifikasi danmengetahui prinsip bekerjanya peralatanElektroforesis DNA dan Protein
• Mengetahui prinsip bekerjanya alat-alat Gel Documentation system (DNA dan Protein)
Electrophoresis Chamber
Electrophoresis
• Electrophoresis is the migration of charged molecules, particles or ion in a medium under the influence of an electric field
• Gel electrophoresis : A method of separating bio-molecules (DNA/RNA/Protein) in a gelatin-like material using an electrical field
• Electrophoresis used to determine the presence and size of PCR products
• General steps of electrophoresis: •Preparation •Separation •Detection
•Many molecules have naturallyoccurring negative and positivecharges on them.
•When introduced to an electricalcurrent, negatively chargedmolecules are attracted to thepositive electrode and positivelycharged molecules are attracted tothe negative electrode.
Electrophoresis : basic principles of Separation
Electrophoresis : basic principles of Separation
Factors influenced electrophoresis mobility/ migration: •Sample : charge, size •Electric field : current, voltage, temperature •Supporting media : adsoprtion, electro-osmosis, molecular sieving •Buffer : composition, concentration, pH
Electrophoresis : basic principles of Separation
• Separation MediaAgarosa--DNA/RNApoliakrilamide DNA,proteinpati/starchisoenzim
What is needed?
• Agarose - a polysaccharide made from seaweed. Agaroseis dissolved (dilarutkan)in buffer and heated, then cools to a gelatinous solid with a network of crosslinked molecules
• Some gels are made with acrylamide if sharper bands are required
What is needed?
• Buffer - in this case TBE 1 x, TAE 1 x
• The buffer provides ions in solution to ensure electrical conductivity.
• Not only is the agarosedissolved in buffer, but the gel slab is submerged (direndam)(submarine gel) in buffer after hardening(mengeras)
Buffer Composition
What is needed?• Also needed are a
power supply and a
gel chamber
• Gel chambers come
in a variety of
models, from
commercial through
home-made, and a variety of sizes
How does it work?
• DNA is an organic acid, and is negatively
charged (remember, DNA for Negative)
• When the DNA is exposed to an electrical field,
the particles migrate toward the positive
electrode
• Smaller pieces of DNA can travel further in a
given time than larger pieces
DNA negatively charged
+-
Power
DNA
• When placed in an electrical field, DNA will migrate toward the positive pole (Anode).
H
O2
• An agarose gel is used to slow the movement of DNA and separate by size.
Scanning Electron Micrograph of
Agarose Gel (1×1 µm)
• Polymerized agarose is porous,
allowing for the movement of DNA
+-
Power
DNA
How fast will the DNA migrate?strength of the electrical field, buffer, density of agarose gel…
Size of the DNA!*Small DNA move faster than large DNA…gel electrophoresis separates DNA according to size
smalllarge
Agarose
Agarose is a linear polymer extracted from seaweed.
D-galactose 3,6-anhydroL-galactose
•Sweetened agarose gels have been eaten in the Far East since the 17th century.
•Agarose was first used in biology when Robert Koch* used it as a culture medium for Tuberculosis bacteria in 1882
*Lina Hesse, technician and illustrator for
a colleague of Koch was the first to
suggest agar for use in culturing bacteria
An agarose gel is prepared by combining agarose powder and a buffer solution.
Agarose
Buffer
Flask for boiling
Gel casting tray & combs
Casting trayGel combs
Power supply
Gel tank Cover
Electrical leads
Electrophoresis Equipment
Seal the edges of the casting tray and put in the combs. Place the casting tray on a level surface. None of the gel combs should be touching the surface of the casting tray.
Preparing the Casting Tray
Agarose Buffer Solution
Combine the agarose powder and buffer solution. Use a flask that is several times larger than the volume of buffer.
Agarose is insoluble at room temperature (left).The agarose solution is boiled until clear (right).
Gently swirl the solution periodically when heating to allow all the grains of agarose to dissolve. ***Be careful when boiling - the agarose solution may become superheated and may boil violently if it has been heated too long in a microwave oven.
Melting the Agarose
Allow the agarose solution to cool slightly (~60ºC) and then carefully pour the melted agarose solution into the casting tray. Avoid air bubbles.
Pouring the gel
Each of the gel combs should be submerged in the melted agarose solution.
When cooled, the agarosepolymerizes, forming a flexible gel. It should appear lighter in color when completely cooled (30-45 minutes). Carefully remove the combs and tape.
Place the gel in the electrophoresis chamber.
buffer
Add enough electrophoresis buffer to cover the gel to a depth of at least 1 mm. Make sure each well is filled with buffer.
Cathode(negative)
Anode(positive)
wells
DNA
6X Loading Buffer: Bromophenol Blue (for color) Glycerol (for weight)
Sample PreparationMix the samples of DNA with the 6X sample loading buffer (w/ tracking dye). This allows the samples to be seen when loading onto the gel, and increases the density of the samples, causing them to sink into the gel wells.
The DNA samples are mixed with a dense loading dye so they sink into their wells and can be seen
Carefully place the pipette tip over a well and gently expel the sample. The sample should sink into the well. Be careful not to puncture the gel with the pipette tip.
Electrical current applied to the chamber
Prinsip Kerja Elekroforesis
wells Bromophenol Blue
Cathode(-)
Anode(+)
Gel
DNA(-)
Staining the Gel
***CAUTION! Ethidium bromide is a powerful mutagen and is moderately toxic. Gloves should be worn at all times.
• Ethidium bromide binds to DNA and fluoresces under UV light, allowing the visualization of DNA on a Gel.
• Ethidium bromide can be added to the gel and/or running buffer before the gel is run or the gel can be stained after it has run.
advantagesInexpensiveLess toxicNo hazardous waste disposal
disadvantagesLess sensitiveMore DNA needed on gelLonger staining/destaining time
Safer alternatives to Ethidium Bromide
Methylene Blue BioRAD - Bio-Safe DNA Stain Ward’s - QUIKView DNA Stain Carolina BLUe Stain SYBR safe stain
…others
Gel documentation systemUV Transilluminator dan Photo polaroid
Staining the Gel Allow the gel to stain for 25-30 minutes.
Ethidium Bromide requires an ultraviolet light source to visualize with GelDoc
Visualisasi DNA
Visualizing the DNA (ethidium bromide)
100 200 300
1,650 1,000
500
850 650
400
5,000 bp 2,000
DNA ladder
DNA ladder
PCR Product
1 2 3 4 5 6 7 8
wells
+ - - + - + + -Samples # 1, 4, 6 & 7 were positive for Wolbachia DNA
Primer dimers
An ethidium-stained gel photographed under UV light
**Each band that you see is a collection of millions of DNA molecules, all of the same length!!
Gel Documentation system
Gel Documentation System Protein
SDS PAGE (Sodium dodecyl sulfate polyacrylamide gel electrophoresis
Principle of SDS PAGE – Vertikal electroforesis
-Sodium Dodecyl Sulfate [SDS]: is a detergent which denature proteins by binding to the hydrophobic regions, all non-covalent bonds will disrupted and the proteins acquire a negative net charge
Steps in SDS-PAGE
Steps in SDS-PAGE
• Extract Protein
• Solubilize and Denature Protein
• Separate Proteins on a gel
• Stain proteins (visualization)
• Analyze and interpret results
Gel Documentation System Protein