introduction to textile raw material

25
BZU TEXTILE ENGINEERS 1 TEXTILES PRODUCTION FLOW TEXTILES PRODUCTION FLOW YARN MANUFACTURING (SPINNING) YARN MANUFACTURING (SPINNING) TEXTILES PROCESSING TEXTILES PROCESSING TEXTILE RAW MATERIAL (NATURAL/MAN-MADE) TEXTILE RAW MATERIAL (NATURAL/MAN-MADE) GARMENT MANUFACTURING GARMENT MANUFACTURING FABRIC MANUFACTURING (WEAVING/KNITTING) FABRIC MANUFACTURING (WEAVING/KNITTING)

Upload: api-3774947

Post on 10-Apr-2015

4.011 views

Category:

Documents


3 download

TRANSCRIPT

Page 1: Introduction to Textile Raw Material

BZU TEXTILE ENGINEERS 1

TEXTILES PRODUCTION FLOWTEXTILES PRODUCTION FLOW

YARN MANUFACTURING

(SPINNING)

YARN MANUFACTURING

(SPINNING)

TEXTILES PROCESSINGTEXTILES PROCESSING

TEXTILE RAW MATERIAL

(NATURAL/MAN-MADE)

TEXTILE RAW MATERIAL

(NATURAL/MAN-MADE)

GARMENT MANUFACTURINGGARMENT MANUFACTURING

FABRIC MANUFACTURING

(WEAVING/KNITTING)

FABRIC MANUFACTURING

(WEAVING/KNITTING)

Page 2: Introduction to Textile Raw Material

BZU TEXTILE ENGINEERS 2

Textiles Raw Materials• Nature presents a large variety of fibers. Beside this it is possible today to produce a number of different kinds of man made fibers but only a relatively small amount of this is actually used in textile industry.

Page 3: Introduction to Textile Raw Material

BZU TEXTILE ENGINEERS 3

Raw Material Blends• Textile raw materials are selected as per the manufacturing policy of the company i.e. whether a composite mill or only a spinning, weaving or dyeing /finishing.

• Cotton mills are usually using the blends of cotton polyester, cotton viscose, cotton acrylic, blends of more then two fibers suit various purpose. Proper selection of the suitable raw material is directly linked with the quality of the planned production.

Page 4: Introduction to Textile Raw Material

BZU TEXTILE ENGINEERS 4

Textile Fiber• Fiber is a matter which includes flexibility, fineness and a high ratio of length to thickness. It is necessary at least length to diameter ratio is 1000 to consider a fiber.

• Some additional characteristics are the required for textile fibers, such as stability at high temperature, a certain minimum strength & extensibility.

Page 5: Introduction to Textile Raw Material

BZU TEXTILE ENGINEERS 5

RAW MATERIALS TYPESRAW MATERIALS TYPES

REGENRATEDREGENRATED

VISCOSE RAYON

CUPRO.

ACETATES

RUBBER

VISCOSE RAYON

CUPRO.

ACETATES

RUBBER

MAN-MADE FIBERSMAN-MADE FIBERS

POLYESTER

NYLON

ACRYLIC

POLYURETHANE

POLYESTER

NYLON

ACRYLIC

POLYURETHANE

SYNTHETICSSYNTHETICS

MINERAL BASE(GLASS/METAL)

MINERAL BASE(GLASS/METAL)

VEGITABLE VEGITABLE

COTTON

FLAX

JUTE

COTTON

FLAX

JUTE

NATURAL FIBERSNATURAL FIBERS

SILK

WOOL

HAIR

SILK

WOOL

HAIR

ANIMAL ANIMAL

MINERAL BASE(ASBESTOS)

MINERAL BASE(ASBESTOS)

Page 6: Introduction to Textile Raw Material

BZU TEXTILE ENGINEERS 6

Physical Types of Fiber1. Staple Fibers: Any fiber with a

practically limited or finite length is called “Staple Fiber” These are small length fiber like cotton, wool, jute etc. it may be natural (Cotton) or man-made (Viscose rayon, Polyester).

2. Filament Fibers: All fibers having a practically unlimited or infinite length are called filaments. Filament fibers are continuous (long) fiber. It may be natural like silk or synthetic like Nylon.

Page 7: Introduction to Textile Raw Material

BZU TEXTILE ENGINEERS 7

Cotton• The cotton fiber from the plant as the long hair attached to the seed inside the boll. As the plant grow the fibers packed tightly into the boll. When it reached to maturity , the bolls bursts and cotton appears as a soft wad of fine fibers.

• Each cotton seed may produce as many as 20000 fibers on its surface, and a single boll will contains 150,000 fibers.

Page 8: Introduction to Textile Raw Material

BZU TEXTILE ENGINEERS 8

1. CULTIVATION

2. PICKING/HARVESTING

3. GINNING

Cotton Fiber Production

Page 9: Introduction to Textile Raw Material

BZU TEXTILE ENGINEERS 9

Ginning• After picking from field the cotton fibers

are separated from seeds by “Ginning Process”.

• Quite often wet & damp cotton is presented to Ginneries which cannot be perfectly pass through the machine passages and generally cases to loose a large percentage of foreign substance . All foreign matter can not be taken out during ginning.

Page 10: Introduction to Textile Raw Material

BZU TEXTILE ENGINEERS 10

Types of Ginning1. Saw Ginning: In saw ginning circular saw revolves on one shaft. The quality of cotton is more clean in saw ginning. But Fiber breakage (Gin cut) is too high in saw ginning.

2.Roller Ginning: In case of roller ginning the cotton fibers are separated by revolving rollers. The cotton contains comparatively more trash.

Page 11: Introduction to Textile Raw Material

BZU TEXTILE ENGINEERS 11

Bast Fibers• These fibers are constructed of long thick walled cells which overlapped one and other; they are cemented together by non cellulose material to form continues strand that may run the entire length of the plant stem.

• On the quantity based the jute is most important in the bast textile fibers, but the most of is made into baggage cloths.

Page 12: Introduction to Textile Raw Material

BZU TEXTILE ENGINEERS 12

Flax• The production of the flax is 1/7 of the jute fibers, but the flax is the fibers from which we make linen; it is on that basis the most important of the bast fibers in textiles.

• Flax appears to be the earliest vegetable bast fiber to be used industrially and there fibers come from the stem of an annul plant which grown was confirmed from almost in all European country, Russia & North America .

Page 13: Introduction to Textile Raw Material

BZU TEXTILE ENGINEERS 13

Production Flow of Flax

1. Cultivation

2. Harvesting

3. Rippling

4. Retting

5. Breaking and Scutching

6. Heckling

Page 14: Introduction to Textile Raw Material

BZU TEXTILE ENGINEERS 14

• Harvesting: When the plant reaches to height of 3`-4` as consider full growth the plant is pulled up & cut down.

• Rippling: Removal of leaves and seeds by a series of up right forks.

• Retting: It involve the decomposition of the woody matter enclosing the cellulose fibers.

Page 15: Introduction to Textile Raw Material

BZU TEXTILE ENGINEERS 15

• Scutching: This process separates unwanted woody matter from fibers.

• Heckling: This process is like the combing process of cotton fibers, The coarse bundle of fibers are separated from finer bundles, and the fibers are also arranged parallel to one another the longer fine fibers.

Page 16: Introduction to Textile Raw Material

BZU TEXTILE ENGINEERS 16

Wool Production• The sheep was an obvious choice when human needs worm clothing, as he wanted an animal that would provide a skin of size suitable for use as a human garment: and he wanted, at the same time, a creature that grew a soft and comfortable fleece.

• Modern sheep have been bread to provide as a large proposition of wool as possible.

Page 17: Introduction to Textile Raw Material

BZU TEXTILE ENGINEERS 17

Wool Grading• When the bales of the wools are opened in the mills, the fleeces are skirted if this has not already been done. The fleece may be classified as whole or, if variable in quality, separated in to sections such as shoulders, ides, back, thighs and birth and belly.

• In general, the shoulder provides the best wool and the flanks a slight lower quality. The belly, the tails and legs yield the poorest quality of wool.

Page 18: Introduction to Textile Raw Material

BZU TEXTILE ENGINEERS 18

Types of Recycle WoolRecovered wool:• The supply of the wool available to the world every year amounts to about 2700 million kg (6000 million lbs.). After scouring, the weight is reduced to some 1550 million kg of pure wool.

• This crop of wool is insufficient to meet the world’s needs, and the supply is maintained to some extend by re-using wool which has already been made in to yarns and fabrics.

Page 19: Introduction to Textile Raw Material

BZU TEXTILE ENGINEERS 19

All wool and virgin wool:• A fabric or garment label as “all wool” is not necessarily made from new fleece wool; it may contain a proportion of the recovered wool. It is customary to refer to new wool materials as “virgin wool”. The “wool mark”, which designates such virgin wools, guarantees that a fabric is made from the new wools.

Page 20: Introduction to Textile Raw Material

BZU TEXTILE ENGINEERS 20

Silk• Silk is not grown in the form of hair, but it is produced by insects which makes their webs. Cocoons & climbing ropes. Almost the entire commercial silk industry is based on one insect as known “silk worm”. The silk is made by it, when it wants to change in chrysalis, then a moth. It spins the silk rapes the fiber around itself in the form of a cocoon, inside which it can settle down in comfort.

Page 21: Introduction to Textile Raw Material

BZU TEXTILE ENGINEERS 21

Silk Production• Production

• Hatching:

• Process of hatching

• Moulting:

• Spinning the cocoon:

• Reeling:

• De-gumming:

Page 22: Introduction to Textile Raw Material

BZU TEXTILE ENGINEERS 22

Silk Production• Production: The silk worm is the cater pillar of a small half moths belonging to “bombyx” it lives only on leaves of mulberry tree. The silk worm spent their life in eating leaves.

• Hatching: Eggs of silk worm are warm up for hatching in winter. Hatching is done by spreading the eggs over the trays in the hatching shed and chopped leaves of mulberry trees are spread on the perforated paper. The worm climbs through the holes for eating the leaves.

Page 23: Introduction to Textile Raw Material

BZU TEXTILE ENGINEERS 23

Silk Production• Moulting: After 35 days of hatching worm is 10000 times as heavy as it was born and it has become greenish white cater pillar. Now it is ready to start spinning, silk worm built its cocoon to settle down in it.

• Spinning the cocoon: The liquid silk comes from two glands called spinneret in the silk worm head, as the liquid comes out it is hardened into very fine filaments which are coated by a gummy substance called sericin which comes from other two glands nearly.

Page 24: Introduction to Textile Raw Material

BZU TEXTILE ENGINEERS 24

Silk Production• Reeling: The unwinding of filament from cocoon, is called reeling.

• De-gumming: The natural gum, sericin is normally left on silk during reeling & weaving, it acts as a sizing material which protects fibers from mechanical injury. The gum is removed from the finished yarn of fabrics usually by boiling with soap in water.

Page 25: Introduction to Textile Raw Material

BZU TEXTILE ENGINEERS 25

The Final Comments• Thank you very much for your time but thanks for this opportunity you have provided to us at very basic stage, this actually gives us very tuff time but with your guidance and instruction forward by our supervisor infect, make this dream imaginable.