10,000 psi and less 10,000 psi – 14,999 psi Part Number Fitting Series Part Number Fitting Series

2020N-012R30 EX 2X90N-04V14 8X, 9X or LX

2020N-02V30 Contact Sales 2240D-025V34 AX

2040N-04V00 PX or NX 2240D-03V34 AX or LX

2240D-02V32 PL 2243D-03V70 AX or LX NPT

2240D-04V32 NX 2244N-025V00 8X

2240D-05V32 601AX-6-5, only 2245D-03V32 AX or LX

2243D-04V70 NX 2380N-04V00 8X, 9X or LX

2244N-08V10 8X or LX 2380N-04V02 8X, 9X or LX

2244N-08V71 8X or LX 2380N-04V04 8X, 9X or LX

2244N-20V30 NX, JIC Female only 2380N-04V06 8X, 9X or LX

2245N-04V00 NX 2380N-04V33 NX

2245N-04V02 NX 2440N-16V37 LX or Hammer Union

2245N-04V04 NX 2640N-24V80 5X or Hammer Union

2245N-08V30 9X 2640N-32V80 5X or Hammer Union

2245N-12V30 9X or LX 00 = Black Jacket 04 = Red Jacket

2245N-16V30 9X 02 = Blue Jacket 06 = Yellow Jacket

2380N-04V33 NX 03 = Green Jacket

2380N-05V71 8X or LX 15,000 psi - 19,999 psi

2390N-04V00 8X, 9X or Subsea 2X90N-12V14 5X

2390N-04V12 8X, 9X or Subsea 2388N-08V14 LX or BX

2390N-04V16 8X, 9X or Subsea 2440N-12V37 LX

2390N-06V13 9X 2440N-12V91 LX

2390N-08V12 8X, 9X or Subsea 20,000 psi - 29,999 psi

2390N-08V13 8X, 9X or Subsea 2440D-03V37 LX

2390N-08V16 8X, 9X or Subsea 2440D-05V37 LX

2390N-12V03 9X or LX 2440N-04V37 LX

2390N-16V12 8X, 9X or Subsea 2440N-04V91 LX

2390N-16V13 8X, 9X or Subsea 2440N-06V91 LX

2390N-16V16 8X, 9X or Subsea 2440N-08V37 LX

2440N-32V10 LX or Hammer Union 2440N-08V91 LX

2640N-08V32 5X

2640N-12V32 5X

2640N-12V71 5X

30,000 psi - 39,999 psi

2440D-025V37 LX

2640D-03V32 5X

2740D-05V32 HX

40,000 psi +

2640D-025V32 HX

2740D-03V30 HX

2840D-03V34 WX

2840D-05V32 WX

Hose Selection by PSI

Parker polyflex

® Products Q

uick Reference G

uide

aerospaceclimate controlelectromechanicalfiltrationfluid & gas handlingfluid & gas handlinghydraulicshydraulicspneumaticsprocess controlsealing & shielding

Parker polyflex® ProductsQuick Reference Guide

This Quick Reference Guide provides overviews and brief specifications to help you select the right Parker polyflex® products for your systems. Additional technical information is contained in the Parker polyflex® Catalog 4900/USA, and is available by calling Parker polyflex® at 1-281-530-5300.

Parker polyflex® formerly Rogan and Shanley Company, Houston, became part of Parker Hannifin in 1995, specializing in ultra-high pressure fluid components.

Parker’s Energy Products Division offers an extensive selection of hose, tubing, fittings and accessory products for specific fluid-handling applications industry wide.

Energy Products product lines and manufacturing capabilities have grown steadily since the 1960s. Today, the Energy Products Division Headquarted in Stafford, Texas, houses manufacturing, marketing, customer service, engineering, R&D, quality control and training. We operate additional manufacturing units in Freeport, TX; Tongsburg, Norway; Ortona, Italy and Ravenna, OH. Our worldwide distribution network serves customers throughout the world.

These capabilities for meeting your needs reflect the vision of the Energy Products Division: “To be the Global Leader in Engineered Polymer-based Products, including System Solutions for the Conveyance and Control of Fluids.”

INTRODUCTION

Parker Hannifin CorporationEnergy Products Division polyflex® Operation12840 Sugar Ridge Blvd.Stafford, TX 77477phone (281) 530-5300fax (281) 530-5353www.parflex.com/epdemail: EPD_Sales@parker.com

10/08 GL 4900-ORG

Parker Fluid Connectors Regional Sales Offices & Service Centers

Your complete source for quality tube fittings, hose & hose fittings, brass fittings & valves,quick-disconnect couplings, and assembly tools, locally available from a worldwide network ofauthorized distributors.

Fittings:Available in inch and metric sizes covering SAE, BSP, DIN, GAZ, JIS and ISO threadconfigurations, manufactured from steel, stainless steel, brass, aluminum, nylon andthermoplastic.

Hose, Tubing and Bundles:Available in a wide variety of sizes and materials including rubber, wire-reinforced,thermoplastic, hybrid and custom compounds.

Worldwide Availability:Parker operates Fluid Connectors manufacturing locations and sales offices throughout North America, South America, Europe and Asia-Pacific.

For information, contact the nearest Regional Sales office listed, or call toll free...

1-800-C-PARKER(1-800-272-7537)

Central RegionSales Office & Service CenterHiawatha, IAphone (319) 393-1221fax (319) 393-1224

Cleveland Region Sales OfficeCleveland, OHphone (216) 896-2404fax (216) 896-4022Service CenterToledo, OHphone (419) 878-7000fax (419) 878-7001fax (419) 878-7420 (FCG Kit Operations)

Service CenterLouisville, KYphone (502) 937-1322fax (502) 937-4180

Great Lakes Region Sales OfficeOtsego, MIphone (269) 694-2550fax (866) 498-7507

Minneapolis Region Sales OfficeMinneapolis, MNphone (763) 513-3535fax (763) 544-3418Service CenterMinneapolis, MNphone (952) 469-5000fax (952) 469-5729

Northeast Region Sales Office & Service CenterTrenton, NJphone (609) 586-5151fax (609) 586-6081

Pacific Region Sales Office & Service CenterPortland, ORphone (503) 283-1020fax (503) 283-2201Service CenterBuena Park, CAphone (714) 522-8840fax (714) 994-1183

Southeast Region Service CenterConyers, GAphone (770) 929-0330fax (770) 929-0230

Southwest Region Sales Officephone (817) 473-4431fax (817) 453-8022

Canada Sales Office & Service CenterGrimsby, ONTphone (905) 945-2274fax (905) 945-3946(Contact Grimsby for other Service Center locations.)

© Copyright 2008, Parker Hannifin Corporation, All Rights Reserved

HOSE Special Application FITTINGS Adapters, Couplings and Accessories

A 58/60 degree coned and threaded tubing/adapter design. Large orifice allows maximum flow of liquids and gases. Pressure Rating - 20,000 psi maximum.Sizes:• 1/4" OD x 0.109" ID - 7/16"-20 male

thd. gland.• 3/8" OD x 0.19" ID - 9/16"-18 male

thd. gland.• 9/16" OD x 0.31" ID - 13/16"-16 male

thd. gland.• 3/4" OD x 0.44" ID - 3/4" NPSM male

thd. gland.• 1" OD x 0.56" ID - 1-3/8"-12 male

thd. gland.

Versatile, high-pressure couplings for easy “quick break” connections.Products: ....... “HP” Series, “C” SeriesSizes: ............. 1/8" to 1/2"Pressures: ..... Up to 30,000 psi working.

An extreme-duty lubricant developed to reduce galling during assembly of threaded parts. Promotes reliable sealing of pipe threads by reducing friction and galling during tightening. A “must have” for stainless steel fittings.Product: ......... ThreadMate™Sizes: ............. 4 oz. Tube

A 58/60 degree coned and threaded tubing/adapter design. An industry standard when working with pressures above 20,000 psi. Pressure Rating - 150,000 psi maximum.Sizes:• 1/4" OD x 0.08" ID - 9/16"-18 male thd. gland.• 3/8" OD x 0.12" ID - 3/4"-16 male thd. gland.• 9/16" OD x 0.18" ID - 1-1/8"-12 male thd. gland.

Stainless steel, two way, non-rotating stem valves and ball type check valves. Pressures from 20,000 psi to 150,000 psi.

To complement the hose assemblies Parker polyflex® provides a wide variety of accessories. See your catalog for a list of:• Support Grips• Bend Restrictors• Containment Grips• Heavy-Duty Abrasion Cover• Burst Shield

10,000 to 20,000 psi Flexible Lances

10,000 to 20,000 psi Delivery Hose 20,000 psi Flexible Lances

20,000 psi Delivery Hose 36,000 psi Hose 40,000 psi Hose

Custom designed for internal tube cleaning with ProLanceTM end fittings. The fittings are sized to travel in and out of tight locations and various applications.2240D-025V34 = .17" ID Hose with a 17,400 psi working pressure.

2245D-03V32 = .20" ID Hose with a 16,240 psi working pressure.

2380N-04V00 = .25" ID Hose with a 13,200 psi working pressure.

Flexible and light weight hose used to transfer water and/or other fluids from one part of the high-pressure waterjetting system to another. (i.e. pump to foot valve)2380N-05V00 = .32" ID Hose with a 13,600 psi working pressure.

2390N-06V13 = .40" ID Hose with a 10,300 psi working pressure.

2244N-08V10 = .50" ID Hose with a 12,760 psi working pressure.

High-pressure hose for maximum durability in cleaning tubes at 20,000 psi and above. Available with Nozzle Nipple end fittings.2440D-025V37 = .15" ID Hose with a 31,900 psi working pressure.

2440D-03V37 = .20" ID Hose with a 26,100 psi working pressure.

2440N-04V37 = .25" ID Hose with a 23,780 psi working pressure.

Durable and reliable hose that is used when higher flow at 20,000 psi is required. Available with swivel nut connections for easy adaptability.2440D-05V37 = .32" ID Hose with a 21,750 psi working pressure.

2440N-06V91 = .40" ID Hose with a 20,300 psi working pressure.

2440N-08V37 = .50" ID Hose with a 20,400 psi working pressure.

2640N-12V32 = .75" ID Hose with a 20,290 psi working pressure.

Type “M” Swivel Nut Adapters Stainless Steel NPT Adapters

Adapters for the Type “M” Swivel Nut hose end fittings. High-quality stainless steel construction with pressure ratings from 15,000 psi to 60,000 psi.Sizes:9/16" - 18 thread3/4" - 16 thread7/8" - 14 thread1" - 12 thread1-5/16" - 12 thread

See your hose selection for size required.

Stainless steel NPT adapters available in many configurations. Tee’s, Elbow’s, Crosses, Couplings & Nipples.

Quick Couplings

Accessories Anti-Gall Lubricant

Medium-Pressure AdaptersHigh-Pressure Adapters Medium & High-Pressure Valves

Ideal for use in robotic waterjet cutting applications or to replace high-pressure rigid tubing. Available with high-pressure tube nipple or Type “M” swivel end fittings.2640D-025V32 = .16" ID Hose with a 40,600 psi working pressure.

2740D-03V30 = .20" ID Hose with a 40,600 psi working pressure.

2840D-03V34 = .20" ID Hose with a 48,000 psi working pressure.

2840D-05V32 = .32" ID Hose with a 40,580 psi working pressure.

Specially-designed hose for “ULTRA-HIGH” pressure applications. Available with high-pressure tube nipple or Type “M” swivel end fittings.2640D-03V32 = .20" ID Hose with a 36,230 psi working pressure.

2740D-05V32 = .33" ID Hose with a 36,230 psi working pressure.

2840D-08V34 = .50" ID Hose with a 36,000 psi working pressure.

HOSE Waterblast

The specially formulated HP series hose has a thermoplastic elastomer core with aramid fiber reinforcement for high-pressure hydraulic, pneumatic and lubricating systems. Non-conductive HP8 has an orange, non-perforated elastomeric cover.HP, HP8 series = 3/16" to 3/8" ID Hose with a 8000 to 10,000 psi working pressure.

Twin-Line and Multi-LineHose Bundle

A value-added service to solve tough routing applications, extensively used in high-pressure hand tool applications. Color coding is available with Parker polyflex® Twin-Line hose.2390N-04V12-D = .25" Hose with a 12,000 psi working pressure.

2380N-04V04-D = .25" Hose with a 16,240 psi working pressure.

2380N-04V02/04-D = .25" Hose with 10,150 psi working pressure (4:1).

Flexible hose suited for general purpose hydraulics. Constructed with a polyamide core tube for high-chemical resistance. For higher working pressure requirements, contact Parker polyflex®

2390N-04V16 = .25" ID Hose with a 12,000 psi working pressure.

2390N-08V12 = .50" ID Hose with a 10,400 psi working pressure.

2390N-16V12 = 1" ID Hose with a 6,500 psi working pressure.

Constructed with a core tube material specially compounded for high-chemical resistance. With a high external collapse pressure resistance, they are well suited for deep water use. Available in long continuous lengths.2380N-05V71 = .32" ID Hose with a 13,600 psi working pressure.

2244N-08V71 = .50" ID Hose with a 12,760 psi working pressure.

Collapse resistant hose suited for offshore oil exploration applications requiring internal pressure resistance and external pressure support. The 57CR series hose offers the ultimate in a lightweight kink and collapse resistant Patent-Pending hose construction.57CR-8, 1/2" ID Hose with a 5000 psi working pressure.

57CR-16, 1" ID Hose with a 5000 psi working pressure.

The Black Eagle is a flexible, chemical resistant alternative to steel pipe for high volume flow rate pumping, chemical injection, and well service cementing. Available in long lengths.2640N-24V80, 1.5" ID Hose with a 10,000 psi working pressure.

2640N-32V80, 2" ID Hose with a 10,000 psi working pressure.

For use in high- and ultra-high pressure hydrostatic testing requirements, where durability and flexibility are required.2380N-04V00 = .25" ID Hose with a 13,200 psi working pressure.

2440D-03V37 = .20" ID Hose with a 26,100 psi working pressure.

2640D-03V32 = .20" ID Hose with a 36,230 psi working pressure.

High-Pressure Hydraulic Hose

High-Pressure Testing Hose

Hose bundles for offshore drilling and special applications. Product: ...............................Contact polyflex®

Sizes: ..................................Contact polyflex®

Working Pressures: ............Contact polyflex®

Special Hose Bundles

Oil Field Service Hose

Sizes: • 1/8" NPT• 1/4" NPT• 1/2" NPT• 3/4" NPT• 1" NPT

Pressure Rating:• 15,000 psi• 15,000 psi• 15,000 psi• 10,000 psi• 10,000 psi

Sizes: Medium Pressure• 1/4" • 3/8" • 9/16" • 3/4"• 1"

High Pressure• 1/4" • 3/8" • 9/16"

The ChemJec™ series of hoses provide high working pressures with some hoses offering greater than 20,000 psi. Specially constructed fluoropolymer core tube for increased chemical resistance. 2370M-34V10 = .25" ID Hose with a 6,475 psi working pressure.

2440M-08V30 = .50" ID Hose with a 16,000 psi working pressure.

2448M-04V30 = .25" ID Hose with a 24,000 psi working pressure.