introduction lida.pdf
TRANSCRIPT
-
7/29/2019 Introduction Lida.pdf
1/7
LIDA GROUPAdd: Room 1102, Zhonghui Building, Haier Road, Qingdao China
Tel: 86-532-88966982 Fax: 86-532-88965571 Email:[email protected]
------------------------------------------------------------------------------------------------------------------------------------------------------------------
Modular HouseDescription:Modular house is made of light steel as the structure and sandwich panels for wall and roof. When delivery, it is knocking-down to save the space. When erection, it
could be installed by common worker with electric tools according to instruction. The structure is connected by bolt and the wall is fixed by rivet. Waterproof design on
the roof and without any measurement. Light material without overload, easy to pack and transport.
The house can be assembled and disassembled more than 6 times, and the service life is more than 15 years.
Characteristics:1. Environment protective, no garbage caused
2. Doors, windows and interior partitions can be flexibly fixed
3. Beautiful appearance, different colors for the wall and roof.
4. Cost saving and transportation convenient
5. Anti-rust and normally more than 15 years using life
6. Safe and stable, can stand 8 grade earthquake.
Technical Parameter of standard prefabricated house:Wind resistance: Grade 11(wind speed125.5km/h)
Earthquake resistance: Grade 7
Live load capacity of roofing: 0.5kn/m2
External and internal wall heat transmission coefficient: 0.35Kcal/m2hc
Live load of corridor is 2.0kn/ m2
-
7/29/2019 Introduction Lida.pdf
2/7
Specification and Material List
No. Item Specification & Remark Photo
1
Length No limited, increase expansion joint when length more than 150m
WidthSingle span should be less than 12m, an arbitrary width could make by
union spans
Wall height Single floor5m,
Roof slope Slope is 1:10 ~ 1:5
Floors Less than 2 floors
2 Steel frame
Steel columns
Square steel tube(Q235) 50x50x2.5mm
Steel Truss
2 Roof panel
75mm thickness EPS insulation corrugated panel,
(Alternative Rock Wool or fiber glass)
0.5mm steel sheet12Kg/m3 polystyrene foam density,
Heat Insulated coefficient is 0.041w/m.k.
Heat transfer coefficient is 0.58w/k.
-
7/29/2019 Introduction Lida.pdf
3/7
3 Wall panel
75mm thickness EPS insulation wall panel
(Alternative insulation Rock Wool or fiber glass)
0.5mm steel sheet12Kg/m3 polystyrene foam density,
Heat Insulated coefficient is 0.041w/m.k.
Heat transfer coefficient is 0.38w/.k.
4 Edge cover 0.5mm thickness color steel plate
5 PVC window
white color, glazed with glass in a thickness of 4mm,
two bay fixed and two bay sliding, with fly screen.
(Alternative plastic steel frame, glass window)
6 ceiling 6mm thickness gypsum board or PVC board
-
7/29/2019 Introduction Lida.pdf
4/7
7 DoorWhite color sandwich panel window,
furnished with a cylinder lock with keys
8 Floor 1.5mm thickness PVC floor leather
9 Washing room It could include the toilet, washing basin and shower
-
7/29/2019 Introduction Lida.pdf
5/7
9
Nails, expansion bolts, glue
and so on
all fittings
10 Technical parameter
wind pressure 0.45kn/m2
fire proof B2 grade
Bearing load 30kg/m2
Installation (it needs electric power)
Installation tools: electric drill, electric hammer, spanner, screwdriver, pulling rivet etc.
Installation efficiency: Four skilled labors one day can erect 40m2 house body.
Transportation:
Container: each 40ft container could load 120~150sqm house body material
-
7/29/2019 Introduction Lida.pdf
6/7
Typical Drawings:
Single Bed Room Two Bed Room Three Bed Room
-
7/29/2019 Introduction Lida.pdf
7/7
Finished Project