International Engineering Research Conference

3rd to 4th July 2019

9.00am – 5.00pm

Taylor’s University, Lakeside Campus

WELCOMING NOTE BY CHAIRPERSON OF THE 12th EURECA 2019

On behalf of the organizing committee, I am delighted to welcome

all the delegates, speakers and sponsors to Taylor’s University for the

12th International Engineering research conference (eureca) held on

3 – 4 July 2019. Eureca allows for the combination of research

initiatives with the presently entrenched culture of project-based

learning, as exemplified through the implementation of CDIO

initiatives at Taylor’s School of Engineering. We believe that the

superior combination will further propel our students towards

enhanced challenge-solving skills to contribute massively to the

development of the nation and mankind.

Our technical program is rich and comprises of 3 keynote speeches, one from academia

and two from industries such as Top Glove and BASF. We have 103 technical papers in

total split into 16 parallel session. Besides, there will be a session for final year students

poster presentations.

As the conference chair of 12th eureca, I know that the success of the conference

depends ultimately on the many people who have worked with us in planning and

organizing the event with us. In particular, we thank the Program Chairs for their wise

advice and brilliant suggestion on organizing the technical program; the external

reviewers for their thorough and timely reviewing of the papers, all the external judges

who accepted our invitation and our sponsors for providing their kind contributions to

the event.

We hope this conference will offer participants a platform to exchange ideas, discover

novel opportunities, reacquaint with colleagues, meet new friends and broaden

knowledge. Lastly, I would like to extend my sincerest gratitude to my organizing team in

making eureca to be yet another success story of Taylor’s School of Engineering!

Associate Professor Dr. Rashmi Gangasa Walvekar

Chairperson of the 12th Eureca 2019 conference,

School of Engineering,

Faculty of Innovation and Technology,

Taylor’s University Lakeside Campus.

KEYNOTE SPEAKER

Associate Professor Dr. Ghafour Amouzad

Mahdiraji

Associate Professor, School of Engineering, Taylor’s

University

Tailored Defecto-Glass as Radiation Dosimeter

Sensor – From Fabrication to Application

SYPNOSIS Ionizing radiation is radiation with enough energy so that

during interaction with an atom, it can remove tightly

bonded electrons from their orbits, causing the atom to

become charged or ionized. Radiation dosimetry is a measurement and calculation of

the radiation dose received by a matter or tissue resulting from the exposure to ionizing

radiation. Ionizing radiation dosimetry has wide range of applications such as personal

dose monitoring, radiation diagnosis, cancer/tumor therapy, food/spice and surgical

tools sterilization, nuclear association industries and etc. This talk demonstrates how by

tailoring glass-based optical fibers, radiation dose detection sensitivity of a material can

be improved more than 400 times. Also, the influence of fiber structures, dimensions, and

doping materials on performance of dosimeters will be discussed. Finally, several

practical applications such as in-vivo dosimetry that the developed dosimeters have

been used will be presented.

PROFILE Since May 2016, Dr. Ghafour joined the School of Engineering, Taylor’s University. Apart from

Optical Communication Systems, his current research interests are on photonic sensors based on

microstructured optical fibers. So far, he published more than 70 refereed journals, 35 conferences,

9 patents, and achieved several research and teaching excellence awards. In teaching, he has

experienced different Electrical and Communication courses and supervised several

undergraduate and postgraduate students. He involved in several research grant projects (total

of >RM 10 Million) as investigator/member. The significance of finding output form his research

projects are different types of optical fiber dosimeter sensors.

KEYNOTE SPEAKER

Ms. Agnes Lau Shok Chien

Head of Product Safety Asia Pacific, BASF.

Come create chemistry! People and talent

development in BASF

SYPNOSIS At BASF, we create chemistry for a sustainable future. We

combine economic success with environmental protection

and social responsibility. Chemical innovations play a key

role as they make a crucial contribution, above and

beyond existing solutions and to virtually all industry sectors.

At BASF, we believe that people are the key to our long-

term success and that talent is in everyone. Come and find

out with Agnes Lau, Head of Product Safety Asia Pacific about how 'you' can create

chemistry with us!

PROFILE Agnes Lau is Head of Product Safety Asia Pacific. She joined BASF in 2012 and is responsible for

creating, building and moulding the Chemical Regulations team into what is it today. Based in

Kuala Lumpur, Agnes frequently visits BASF sites across Asia Pacific markets and has gained insights

on the region’s developing and evolving chemical and trade control regulation landscape over

the years. In her current role, Agnes leads a diverse expertise team across different countries in

Asia Pacific. Agnes is passionate in people development and enabling talent in living their fullest

potential

KEYNOTE SPEAKER

Ms. Mei Ng

HR Senior Manager of Top Glove, Chairman of Top

Glove Foundation

Employers’ Expectations and

Employability Skills of Fresh Graduates

SYPNOSIS Employability skills refer to set of skills and knowledge

required by the graduates in the workplace to satisfy

their needs and corporate expectations. In this talk, we will discuss the expectation from

the recruiters and how the students can develop their employability skills and how it

should be applied in the interview session.

PROFILE Ms. Mei Ng is the Senior Manager, HR of Top Glove. She has more than 20 years of talent acquisition

experience and recruits more than 2300 graduates yearly and globally for the company. A

graduate from RMIT, Australia and a council member of the Malaysian Rubber Export Promotion

Council (MREPC), Ms. Ng is also the Chairman for Top Glove Foundation.

Engineering Education Workshop: Conceiving - Designing - Implementing -

Operating (CDIO) Framework

SYNOPSIS:

Ever since developed by MIT in year 2000, the CDIO Framework has emerged as the

core of Engineering Education globally and being adapted if not adopted by

engineering schools internationally. A statement of the underlying need for

engineering education is that: Graduating engineers should be able to conceive-

design-implement-operate complex value-added engineering systems in a modern

team-based environment [CDIO Syllabus Version 2.0, 2011]. CDIO-ability has been seen

as the ultimate aim for engineering graduate whereas to attain this skill, an engineering

graduate will have to master 1. Technical Knowledge and Reasoning 2. Personal and

Professional Skills and 3. Interpersonal Skills and these can be achieved through project-

based learning. This workshop will introduce CDIO framework, how it is implemented

though project-based learning and some innovative deliveries that may be useful to

all engineering educators.

Trainers biodata:

Dr Se Yong is a lecturer in the School of Engineering, Taylor’s University.

He was the Programme Director for Foundation in Engineering, which

allows him to adopt many teaching and learning initiatives in the

programme to improve student learning experience and knowledge

attainment. Dr Se Yong is actively participated in teaching and

learning exhibition, nationally and internationally. In year 2018, he has

won 3 medals from the competitions and also presented 2 papers in

international engineering education conferences. Dr Se Yong is a fond

user of CDIO and adopting it in his project-based modules.

Dr Rashmi Walvekar obtained her bachelor’s in Chemical

Engineering from SDM college of engineering and Technology,

Dharwad (India). She completed her PhD in the area of nanofluids for

heat transfer application. During her PhD she won several awards at

university, national and international level. She has published more

than 30 journal papers appearing in both ISI and Scopus indexed

journals. Her other research output includes 3 patents and 4 book

chapters. Dr Rashmi has been awarded with vice chancellor most

cited academic award and best paper presentation at Taylor’s

research fair in year 2016. Her research area includes nanofluid

synthesis for heat transfer application, deep eutectic solvents as

alternative solvents, recycle of waste rubber tire, production of

nanoparticles from biomass and bio-nanolubricants.

PROGRAMME ITINERARY

8.30am-9.00am

Delegate Registration

LT1, Block B,

Level 1

9.00am-9.10am

Welcome Address of 12th Eureca 2019

Associate Professor Dr. Rashmi Gangasa Walvekar

Chairperson, Organising Committee

for the 12th Eureca 2019

LT1, Block B,

Level 1

9.10am-9.20am Official launch and group photo LT1, Block B,

Level 1

9.20am-9.50am

Keynote Session 1

Associate Professor Dr. Ghafour Amouzad Mahdiraji

Taylor’s University

LT1, Block B,

Level 1

9.50am-10.00am

Break

10.00am-12.20pm Session A1

E6.02

Session A2

E6.03

Session A3

E6.04

Session A4

E6.05

Session A5

E6.16

Session A6

E6.17

Session A7

E6.18

Session A8

E6.19

Session A9

E7.02

Session A10

E7.03

Session A11

E7.14

Final Year Project 1 Poster Exhibition Block B,

Level 1

12.20pm-1.30pm Lunch Break

C6.01,

Block C,

Level 6

1.30pm-3.30pm Session B1

E6.02

Session B2

E6.03

Session B3

E6.04

Session B4

E6.05

Session B5

E6.16

Final Year Project 1 Poster Exhibition Block B,

Level 1

3.30pm-4.30pm Keynote Session

1. Top Glove – Ms. Mei Ng

2. BASF Asia Pacific – Ms. Agnes Lau Shok Chien

LT1, Block B,

Level 1

4.30pm-5.00pm Awards and Closing Ceremony LT1, Block B,

Level 1

July 3, 2019

(Wednesday)

PROGRAMME ITINERARY

9.30am-12.30pm

Engineering Education Workshop: Conceiving - Designing -

Implementing - Operating (CDIO) Framework

CDIO

Incubator,

Block D,

Level 1

12.30pm-2.00pm

Lunch

July 4, 2019

(Thursday)

Session A1

Venue: E6.02

Time: 10.00am – 12.20pm

10.00am-10.20am

2CE01

Effect of Turning Frequency on Composting of Empty Palm Fruit Bunches with

Partially Treated Palm Oil Mill Effluent

Alvin Thong Jia Cherng, Phoon Chow Lin

10.20am-10.40am

2CE02

Wastewater treatment using Hibiscus sabdariffa: Drying, extraction and

response surface methodology optimisation studies

Anis Izyani Binti Mohd Ruslee, Nurhazwani Ismail, Chua Bee Lin

10.40am-11.00am

2CE03

Vulnerability Analysis Towards Process Reliability

Bryan Heng Shoong Ern, Leong Yik Teeng, Wan Yoke Kin

11.00am-11.20am

2CE04

Investigation of Foulants in Sewage for the Application of PVDF Membrane

in Membrane Bioreactor

Chu Yu Huan, Oh Kai Siang

11.20am-11.40am

2CE05

Green Wall Filtration System for Lake Water Treatment

Chua Guan Xuan, Oh Kai Siang, Yoon Li Wan

11.40am-12.00pm

2CE06

Preparation and Characterization of Chitosan-Polyvinyl Alcohol Hybrid

Membrane

Emir Danial Iskandar Abdul Razak, Pang Ming Meng, Oh Kai Siang

12.00pm-12.20pm

2CE07

Synthesize an Optimum Combined Heat and Power (CHP) System for Sago

Industry via Mathematical Approach

Gan Sheng Hsien, Wan Yoke Kin, Leong Yik Teeng

Session A2

Venue: E6.03

Time: 10.00am – 12.20pm

10.00am-10.20am

2CE08

Effect of Plasticizer on Properties of Polylactic Acid filled Graphene

Goh Kah Sheng Derek, Pang Ming Meng, Koay Seong Chun

10.20am-10.40am

2CE09

Effect of Phosphorus-Limitation on Glucose and Bioethanol Production from

Microalgae

Isaac James, Yoon Li Wan, Chow Yin Hui

10.40am-11.00am

2CE10

Chitosan-PEG membrane for Greywater treatment: A study of the effect Non-

Woven Fabric support on the membrane properties

Jabe Abdelrahaman Roman Jermalili, Oh Kai Siang

11.00am-11.20am

2CE11

Synthesis of Crumpled Graphene by Fast Cooling Method

Jerald Mulder Semat Anak Marcus, Rashmi Walvekar

11.20am-11.40am

2CE12

Synthesize A Sustainable Wastewater Treatment Plant (WWTP) For Sago

Industry

Kelvin Teo Kai Wen, Wan Yoke Kin, Leong Yik Teeng

11.40am-12.00pm

2CE13

Direct Saccharification of Lignocellulosic Biomass by Using Deep Eutectic

Solvent for Reducing Sugar Production

Ker Wei Hang, Yoon Li Wan, Chow Yin Hui

12.00pm-12.20pm

2CE14

Studies of Hybrid Drying Optimisation of Ultrasound Assisted Osmotic

Dehydration (UOAD) and Hot-Air Drying on Eucalyptus Deglupta (Rainbow

Eucalyptus)

Khor Yit Cheng, Chua Bee Lin

Session A3

Venue: E6.04

Time: 10.00am – 12.20pm

10.00am-10.20am

2CE15

Extraction of Bioactive Compounds with Potential Antioxidant activity from

Carica papaya Leaves with Aqueous Micellar Two-Phase System

Lee Teck Yiet, Chow Yin Hui, Chua Bee Lin

10.20am-10.40am

2CE16

Development Of Handmade Papers Based On Tree Pruning Waste

Lee Zheng Xun, Low Jiun Hor Low, Yoon Li Wan

10.40am-11.00am

2CE17

Development of Eco-friendly Polymer Films based on Liberica Spent Coffee

Ground Extract and Poly(vinyl alcohol) for Active Packaging Application

Lim Shu Wen, Low Jiun Hor, Chow Yin Hui

11.00am-11.20am

2CE18

Preparation and characterisation of polylactic acid composites filled with

hybrid conductive filler

Mohamad Amirul Haziq Mohd Azhar, Pang Ming Meng, Koay Seong Chun,

Yose Fachmi Buys

11.20am-11.40am

2CE19

Synthesis and Characterization of Hybrid Graphene Oxide/Gold

Nanoparticle

Muhammad Aizat Bin Mohamed Zahari, Rashmi Gangasa Walvekar,

Mahesh Vb, Khalid Mc, Priyanka R. Jd

11.40am-12.00pm

2CE20

Experimental Measurement Of Viscosity Of Blood Mimic For 3D-Printed

Medical Simulator

Muhammad Faris Mohd Fauzi, Anis Suhaila Shuib1, Muhammad Izzat

Ahmad Sabri, Ahmad Sobri Muda

12.00pm-12.20pm

2CE21

Potential of Using Hibiscus Sabdariffa in Treating Greywater

Nadia Falihah Ahmad Yani, Nurhazwani Ismail

Session A4

Venue: E6.05

Time: 10.00am – 12.20pm

10.00am-10.20am

2CE22

Effect of Activated Organic Sludge on the Process and Quality of

Composting Palm Oil Empty Fruit Bunches

Nur Lyana Bt. Mohamad Azhar, Phoon Chow Lin

10.20am-10.40am

2CE23

Preparation and Characterization of Thermoplastic Starch and Garden

Waste Fibers as Green Composites

Ong Qi Sean, Phang Siew Wei, Yoon Li Wan

10.40am-11.00am

2CE24

Separation of Intracellular Ectoine Produced by Halomonas salina Cells

using Aqueous Biphasic System

Poh Chin Tee, Ng Hui Suan, Yoon Li Wan, Chow Yin Hui

11.00am-11.20am

2CE25

Protein Partitioning In Sugaring-Out Assisted Aqueous Biphasic System

Sahlini Alagan, Chow Yin Hui, Yoon Li Wan

11.20am-11.40am

2CE26

Bioactivity Analysis of Solution Casted Bio-composite Made Up of Polyvinyl

Alcohol and Natural Hydroxyapatite Derived from Fish Bones

Sandy Song Chia Shuen, Phang Siew Wei, Yap Wei Hsum

11.40am-12.00pm

2CE27

The Development of Blood Mimicking Fluid with Polymer Particles

Selena Ng Hwei Ying, Anis Suhaila Shuib, Eunice Phang Siew Wei,

Muhammad Izzat Ahmad Sabri

12.00pm-12.20pm

2CE28

Ultrasound-assisted Extraction of Phenolic Compounds from Salvia

officinalis L. using Deep Eutectic Solvents: Antioxidant Capacity

Sem Yong Hao, Chua Bee Lin, Yoon Li Wan

Session A5

Venue: E6.16

Time: 10.00am – 12.20pm

10.00am-10.20am

2ME01

Development and Design of a Non-Rigid Blimp Shape to Improve its

Aerodynamic Efficiency at Different Altitudes

Aaron Gayvin, Abdulkareem Sh. Mahdi Al-Obaidi, Phang Swee King,

Shahrooz Eftekhari

10.20am-10.40am

2ME02

Development of a Computational Fluid Dynamics (CFD) Flow Model for

Simulating the Bubble-induced Noise in Refrigerant Piping System

Ahmad Naziirul Bin Ahmad Nazar, Ng Khai Ching

10.40am-11.00am

2ME03

Potential of Sugarcane Ethanol as Fuel for Vehicles in Malaysia

Arisya Hannah Umaruddin, Mohd Faizal Fauzan

11.00am-11.20am

2ME04

Computational Study for the Improvement of Dual Inlet Hydrogen Battery

using Different Flow Field Ratio Dimension Designs

Ashwin A/L Sekaran1, Mohd. Hardie Hidayat bin Mohyi

11.20am-11.40am

2ME05

Design and Fabrication of Novel Sound Insulator Using PLA-Fibre

Benjamin Earl Sinidol, Mohammad Hosseini Fouladi, Satesh Narayana

Namavisayam

11.40am-12.00pm

2ME06

Design And Analysis Of Airborne Wind Energy System (AWES) For

Microgeneration In Malaysia

Brandon Chew Chu Shyan, Douglas Tong Kum Tien, Shahrooz Eftekhari

12.00pm-12.20pm

2ME14

Numerical Investigation of the Effect of Spoiler Shape and Setting Angle on

the Performance of Racing Car

Hesam Eftekhari, Abdulkareem Sh. Mahdi Al-Obaidi

Session A6

Venue: E6.17

Time: 10.00am – 12.20pm

10.00am-10.20am

2ME07

Reduction of Hygroscopicity of PLA Filament for 3D Printing by Introducing

Nano Silica as Filler

Chin Tze Seng, Se Yong A/L Eh Noum

10.20am-10.40am

2ME08

Development of a Novel Multilayer Sound Absorption Panel

Choh Calveen, Mohammad Hosseini Fouladi, Satesh Narayana

Namasivayam

10.40am-11.00am

2ME09

Recycling of Polylactic Acid (PLA) Wastes from 3D Printing Laboratory

Choo Wei Jean, Choo Hui Leng, Ong Thai Kiat

11.00am-11.20am

2ME10

The Impact Of Unilateral And Bilateral Landing In Vertical Jump Among

Basketball Athletes

Darien Wong Wen Han, Ku Pei Xuan

11.20am-11.40am

2ME11

Preparation and Characterisation of Conductive Polymer Composite Made

by Graphite Scrap

Dylan Tong Jia Yee, Koay Seong Chun, Pang Ming Meng, Ong Thai Kiat

11.40am-12.00pm

2ME12

Design and Analysis of a Small- Scaled Compressed Air Energy Storage

System (CAES)

Elisa Eustace Pereira, Douglas Tong Kum Tien

12.00pm-12.20pm

2ME13

Development of Hierarchical Topographies with Benchtop Methods and

Comparisons of Its Self-Cleaning Characteristics with Single-Layered Micro

Topographies

Goeh Kar Jian, Felicia Wong Yen Myan

Session A7

Venue: E6.18

Time: 10.00am – 12.20pm

10.00am-10.20am

2ME15

Densification Behavior and Mechanical Properties of ZTA

Kevin Chandra, Sivakumar Sivanesan, Se Yong Eh Noum

10.20am-10.40am

2ME16

Computational Study for the Improvements of Proton Exchange Membrane

Fuel Cell using Hybrid Flow Design

Kok Ewe Gin, Mohd. Hardie Hidayat bin Mohyi

10.40am-11.00am

2ME17

The Numerical Analysis to Understand the Characteristics of Flow Around a

Honeycomb Topography in Relation to Biofouling Control

Leow Zyncoln, Felicia Wong Yen Myan

11.00am-11.20am

2ME18

Properties of Zirconia Ceramics with Stainless Steel Additions

Lo Wei Liam, Kelvin Chew Wai Jin, Ramesh Singh

11.20am-11.40am

2ME19

Numerical Simulation and Modelling on Thermoelectric and Mechanical

Performance of Thermoelectric Device

Luqman Hakiem Bin Mohd Razib, Lim Joon Hoong

11.40am-12.00pm

2ME20

Study on the Effect of Different Oxidants Used for Dyes Removal from

Wastewater

Mogana Vishnu Uthrapathy, Norhabibah Mohamad

12.00pm-12.20pm

2ME21

Effect of Printing Temperature on The Mechanical Properties of Copper Metal

Polylactide Acid models

Mohd Fara Zureel Ikhqwan bin Mohd Arpan, Lim Joon Hoong

Session A8

Venue: E6.19

Time: 10.00am – 12.20pm

10.00am-10.20am

2ME22

Investigation on Rheological Behaviour of Chrysanthemum stem fiber filled

Polylactic Acid (PLA) biocomposites

Koay Seong Chun, Muhamad Syafiq Aiman Mohamed Kaberi, Chou

Pui May, Ong Thai Kiat

10.20am-10.40am

2ME23

Development of a Visualization Software for Visualizing Computational Fluid

Dynamics Results Based on Mesh-Free Method

Muhammad Amirul Hakim, Ng Khai Ching

10.40am-11.00am

2ME24

An Economical Approach To Detect Cervical Cancer Through PAP Smear Test

Muhammad Bilal Ahmed, Hosseini Fouladi, Chong Pei Pei, Satesh Narayana

Namasivayam

11.00am-11.20am

2ME25

Potential of Waste to Energy in Malaysia

Muhammad Syafiq Mohd Fadli, Mohd Faizal Fauzan

11.20am-11.40am

2ME26

Preparation of Nanocellulose Via Enzymatic Extraction

Naviin Munusamy, Chou Pui May, Koay Seong Chun

11.40am-12.00pm

2ME27

Simulation of Discomfort from Combined Noise and Vibration in Vehicle

Rony Khong, Mohd Farid Bin Aladdin

12.00pm-12.20pm

2ME28

Polymer-Based Adsorbents For Dyes Removal From Aqueous Solution Using

Polypyrrole-Polyethylenimine (Ppy-Pei) Composite

Said Abdallah Al-Ashkhari, Norhabibah Mohamad

Session A9

Venue: E7.02

Time: 10.00am – 12.20pm

10.00am-10.20am

2ME29

A Study of Passengers Vibration Transmission on in a Vehicle

Sarveshkumar a/l Ananda Kumaresh, Mohd Farid Bin Aladdin

10.20am-10.40am

2ME30

Structural Design Optimization of a Reinforced Side Impact Rear Door Beam

of a Vehicle

Shayan Naseri Nia, Noor Zafirah Binti Abu Bakar

10.40am-11.00am

2ME31

Structural Design Optimization of Reinforced Side Impact Front Door Beam of

a Vehicle

Soo Yoong Feng, Noor Zafirah Abu Bakar, Azmi Osman

11.00am-11.20am

2ME32

Production and Characterization of Nanocellulose Produced from Kapok

Husk via Acid Hydrolysis

Tang Mooi Lian, Chou Pui May, Koay Seong Chun

11.20am-11.40am

2ME33

Preparation and Characterization of Corn Husk Fiber Reinforced Epoxy

Composites

Tengku Maimunah Binti Tengku Iskandar, Koay Seong Chun, Chou Pui May,

Ong Thai Kiat, and Chan Ming Yeng

11.40am-12.00pm

2ME34

Assessment of Automobile Flywheel By Using Finite Element Analysis

Tham Zi Bin, Ku Pei Xuan

12.00pm-12.20pm

2ME35

Effects of Two-Step Sintering on MnO2-Doped Zirconia Ceramics

Thevan Raj, Kelvin Chew Wai Jin

Session A10

Venue: E7.03

Time: 10.00am – 12.20pm

10.00am-10.20am

PG04

Modeling of Vienna Rectifier with PFC Controller for Electric Vehicle Charging

Stations

Gowthamraj Rajendran, Chockalingam Aravind Vaithilingam, Oks Prakash

10.20am-10.40am

PG07

Internal Cathodic Protection for Above Ground Storage Tank Using Sacrificial

Anodes

Muhammad N. Jawad, Ghafour Amouzad Mahdiraji, Mohammad Taghi

Hajibeigy

10.40am-11.00am

EUG09

Competency Based-Assessment: Implementation on Manual Polishing

Practice in Housekeeping Department

Yoyoh Jubaedah, Nenden Rani Rinekasari, Neni Rohaeni

11.00am-11.20am

EUG13

Teaching Basic Mathematics and Technology to Elementary Student

Dyah Triwahyuningtyas, Muhammad Nur Hudha, Diyah Ayuning Tyas, Isma

Widiaty, Asep Bayu Dani Nandiyanto, Ida Hamidah

11.20am-11.40am

EUG16

Performance Analysis of Stand-Alone Triple Effect Single Basin Solar Still with

Evacuated Tubes

Reig Hitesh Panchal, Nishant Thakar, Kush Saurin Uday Valmik Patel

11.40am-12.00pm

2EE07

Generating Electricity Through Thermo-Photovoltaic Cells

Mary Robin, Hafisoh

12.00pm-12.20pm

2EE08

Design and Analysis of Self-powered Printed Temperature Sensor

Vince Chow Kwai Yuen, Teh Aun Shih

Session A11

Venue: E7.14

Time: 10.00am – 11.40am

10.00am-10.20am

EUG02

Adsorption Isotherm of Submicron Silica Particle Prepared from Rice Husk

Risti Ragadhita, Asep Bayu Dani Nandiyanto, Willy Cahya Nugraha

10.20am-10.40am

EUG04

Effect of pH Condition on the Production of Well-Dispersed Carbon

Nanoparticles from Rice Husks

Ajeng Sukmafitri, Risti Ragadhita, Asep Bayu Dani Nandiyanto, Willy Cahya

Nugraha

10.40am-11.00am

EUG06

Porous Carbon Particles from Rice Husk and Theirs Adsorption Properties

Meli Fiandini, Risti Ragadhita, Asep Bayu Dani Nandiyanto, Willy Cahya

Nugraha

11.00am-11.20am

EUG15

Establishment of Biological Nitrogen Removal Process for Drinking Water

Treatment in Malaysia

Eng Cheong Wong, Ying Hui Ong, Yee Sern Ng

11.20am-11.40am

EUG18

Effect of Graphene Doping on the Charge Carrier and Thermoelectric

Properties of RCF-Bi2S3 Composites

Priyanka R. Jagadish, Mohammad Khalid, Lau Phei Li, Nowshad Amin, Andy

Chan

Session B1

Venue: E6.02

Time: 1.30pm – 3.10pm

1.30pm-1.50pm

2CE29

Application of Black Liquor Derived Carbonaceous Compound in Direct

Carbon Fuel Cell

Teoh Shu Wei, Yoon Li Wan, Low Jiun Hor

1.50pm-2.10pm

2CE30

Fabrication of 3D-Printed Bone Scaffold of Natural Hydroxyapatite from Fish

Bones in Polylactic Acid Composite

Vickneson A/L Nadarajan1, Eunice Phang Siew Wei Phang, Choo Hui Leng

2.10pm-2.30pm

2CE31

Synthesis and Optimization of Sago-Based Biochemical Value Chain

Wong Weng Pin, Wan Yoke Kin, Leong Yik Teeng

2.30pm-2.50pm

2CE32

Resiliency Analysis in process of glove manufacturing line

Wong Yong Liang, Leong Yik Teeng, Wan Yoke Kin

2.50pm-3.10pm

2CE33

Two-stage Hybrid Pre-treatment of Ultrasound-Assisted Osmotic Dehydration

and Freeze Drying of Momordica Charantia leaves

Wong Zhen Bing, Chua Bee Lin

Session B2

Venue: E6.03

Time: 1.30pm – 3.30pm

1.30pm-1.50pm

2EE01

An Intelligent Algorithm for Stock Market Prediction using Long Short Term

Memory (LSTM)

Ang Zhe Han, Edwin C.Y. Chung

1.50pm-2.10pm

2EE02

Traffic Monitoring using Bluetooth Signals

Bryan Chang Xien Qiang, Edwin C.Y. Chung

2.10pm-2.30pm

2EE03

Performance Analysis of Microwave Microstrip Ring Sensor for Determination

of NPK Nutrients Contents of Fertilizer

Cheah Yong Jin, Mun Hou Kit

2.30pm-2.50pm

2EE04

Robust Tracking Drone Flight Controller Design for Target Tracking and

Following

Lee Hou Yuen, Phang Swee King

2.50pm-3.10pm

2EE05

Development of Low Computational Power Vision Tracking Algorithm on

Embedded System

Lee Keifer, Phang Swee King, Chew Wei Jen

3.10pm-3.30pm

2EE06

Low Cost Haptic and Motion Based Mixed Reality Peripheral Interface

Lou Wei Jun, Teh Aun Shih

Session B3

Venue: E6.04

Time: 1.30pm – 2.50pm

1.30pm-1.50pm

PG01

Potential Study of Hybrid Drying on The Reduction of Energy Consumption of

Drying Process

Choong Oon Choo, Chua Bee Lin, Mah Siau Hui

1.50pm-2.10pm

PG02

Dilution and ZnCl2 Impact on Eutectic Solvents as Devulcanizing Reagent in

De-linking Phenomena of Waste Ground Rubber Tire

Ricky Saputra, Rashmi Walvekar, Mohammad Khalid

2.10pm-2.30pm

EUG14

Steady Flow of Power-Law Fluids Past a Sphere in a Tapered Tube

Lubhani Mishra, R. P. Chhabra

2.30pm-2.50pm

EUG19

Feasibility Study of Phosphonium-Based Ionic Liquids As Energy Efficient

Solvents for Extractive Desulfurization of Liquid Fuels

Swapnil Dharaskar, Kailas Wasewar, Mika Sillanpaa

Session B4

Venue: E6.05

Time: 1.30pm – 3.30pm

1.30pm-1.50pm

PG03

Validation of Finite Element Model of Human Lumbar Vertebrae under

Mechanical Forces

Palaniswamy Mohankumar, Anis Suhaila Shui, Ng Khai Ching, Shajan Koshy,

Karuthan Chinna, Chin Seong Lim

1.50pm-2.10pm

PG05

A Review of Transformative Learning Theory with Regards to its Potential

Application in Engineering Education

Douglas Kum Tien Tong, Satesh Narayana Namasivayam, Logendra Stanley

Ponniah

2.10pm-2.30pm

PG08

Hardware Simulation of Semi-Decoupled Tuning Gain Anti-windup PI

Controllers for Motor Speed Application

Thong Ling Chiah, Choon Lih Hoo, Chin Yau Chung

2.30pm-2.50pm

EUG01

Simulation Quality Factor of Microring Resonator Concentration Glucose

Sample 0 – 1.5%

Cahya Julian, Budi Mulyanti, Lilik Hasanah, Ahmad Aminudin, Roni Sumantri,

Ananda Aransa

2.50pm-3.10pm

EUG03

Simulation of Hemoglobin Detection Using Surface Plasmon Resonance

Based on Kretschmann Configuration

Roni Sumantri, Cahya Julian, Ananda Aransa, Lilik Hasanah, Ahmad

Aminudin, Budi Mulyanti

3.10pm-3.30pm

EUG05

Simulation of Microring Resonator Based on Racetrack Shaped

Configuration For Glucose Sensing

Ananda Aransa, Cahya Julian, Roni Sumantri, Lilik Hasanah, Ahmad

Aminudin, Budi Mulyanti

Session B5

Venue: E6.16

Time: 1.30pm – 3.30pm

1.30pm-1.50pm

EUG07

Commercial Automatic Voltage Stabilizer (AVS) and Programmable

Automatic Voltage Stabilizer (PAVS) Comparison Performance

Doni Fajar Ramadhan, In Mustagisin, Sriyono, Ade Gafar Abdullah, Agus

Solehudin, Ida Hamidah

1.50pm-2.10pm

EUG08

Assessment of Student Competence Using Electronic Rubric

Ana Ana, Cica Yulia, Yoyoh Jubaedah, Muktiarni Muktiarni, Vina Dwiyanti,

Asep Maosul

2.10pm-2.30pm

EUG10

Water Quality Monitoring in Citarum River (Indonesia) Using IoT (Internet of

Thing)

Lazuardi Fenjano, Budi Mulyanti, Rizki Dwi Purnomo, Arjuni Budi Pantjawati,

Roer Eka Pawinanto and Asep Bayu Dani Nandiyanto

2.30pm-2.50pm

EUG11

Design and Fabrication of Fiber Optic Chemical Sensors (FOCS) System for

Salinity Detection of NaCl Solutions

Eris Rifaldi, Budi Mulyanti, Gandi Sugandi, Arjuni Budi Pantjawati, Lilik Hasanah,

Roer Eka Pawinanto, Asep Bayu Dani Nandiyanto

2.50pm-3.10pm

EUG12

Speed Adjusment Simulation Using Voltage Divider Circuit

In Mustagisin, Doni Fajar Ramadhan, Sriyono, Ade Gafar Abdullah, Agus

Solehudin, Ida Hamidah

3.10pm-3.30pm

EUG17

Smart Vehicle Headlights Control System

Suresh Manic Kesavan, N. Hasoon Feras

THE 12TH EURECA 2019 COMMITTEE

STEERING COMMITTEE

Conference Chair

Prof. Ir. Dr. Satesh Namasivayam

Past Head of School, School of Engineering

Ir. Dr. Siva Kumar A/L Sivanesan

Acting Head of School, School of Engineering

Co-Chairs

Assoc. Prof. Dr. Mohammad Hosseini Fouladi

Ir. Eunice Phang Siew Wei

ORGANISING COMMITTEE

Chair

Assoc. Prof. Dr. Rashmi Gangasa Walvekar

Co-Chair 1

Dr. Phang Swee King

Co-Chair 2

Dr. Yoon Li Wan

Secretary

Dr. Chow Yin Hui

Treasurer

Dr. Anis Suhaila Shuib

Event Manager

Dr. Low Jiun Hor

Members

Assoc. Prof. Ir. Dr. Ng Khai Ching

Dr. Chew Wei Jen

Dr. Chou Pui May

Dr. Chua Bee Lin

Dr. Emy Marlina Samsudin

Dr. Hafisoh Ahmad

Dr. Hoon Yap

Dr. Kelvin Chew Wai Jin

Dr. Ku Pei Xuan

Dr. Leong Yik Teeng

Dr. Lim Joon Hoong

Dr. Mun Hou Kit

Dr. Oh Kai Siang

Dr. Pang Ming Meng

Dr. Tee Lee Hong

Dr. Wan Yoke Kin

Ms. Nurhazwani Ismail