international conference · international national prof. angappa gunasekaran, university of...
TRANSCRIPT
-
GIFT Society
International Conference
on
Industrial and Manufacturing Systems OCTOBER 09th – 11th, 2020
(Supported By: TEQIP – III)
Organized By
Department of Industrial & Production Engineering
Dr B R Ambedkar National Institute of Technology Jalandhar, Punjab, INDIA
In Association with
MNNIT Allahabad
NIT Patna
PEC Chandigarh
1
1
Sample output to test PDF Combine only
-
Department of Industrial and Production Engineering under the aegis of NIT Jalandhar is organizing an
“International Conference on Industrial and Manufacturing Systems” (CIMS-2020) from
09th -11th October, 2020. The present conference aims at providing a leading forum for sharing original
research contributions and real-world developments in the field of Industrial and Manufacturing Systems so
as to contribute its share for technological advancements. Globalization provides all around development and
this development is impossible without technological contributions.
About Dr. B. R. Ambedkar National Institute of Technology, Jalandhar
The Institute is named after Bharat Ratan Dr. B. R. Ambedkar, founder of Indian Constitution. The Institute
came into existence in the year 1988 as Regional Engineering College on a beautiful campus of about 154
acres close to the heart of Jalandhar City. The Institute obtained the status of “Institute of National Importance”
by Act of Parliament in 2007. The Institute is located on the G.T Road Amritsar bye-pass at a distance of 15
km from Jalandhar Bus Stand, 12 km from Jalandhar City Railway Station, and 18 km from Jalandhar Cantt
Railway Station. The Institute is well connected to the National Capital through rail and road link.
CIMS - 2020
2
2
Sample output to test PDF Combine only
-
About Department of Industrial and Production Engineering
The Department of Industrial and Production Engineering was founded in 1989 and has shown its potential
to be as one of the vibrant department of the Institute. The department offers B. Tech., M. Tech. and PhD
programs. The department is offering B. Tech. (Industrial and Production Engineering) with an intake of 120
and two M. Tech. Programs one in Industrial Engineering and other in Manufacturing Technology with the
intake of 28 in each program. Presently (35) thirty-five research scholars are registered in the department
pursuing Ph.D. For the above programs, the course curriculum has been designed compatible to the existing
and emerging needs of the industry. The autonomy of the Institute is a privilege to the department in terms of
flexibility to modify and revise courses/syllabi at different time intervals to cater contemporary needs of the
Industry.
The Department has established state-of-the-art facilities in various laboratories. Adequate inputs of practical
training, industrial tours, case studies, project work and computer applications are given to support core theory
courses. The major research and consultancy area of the department includes Supply chain management,
Reliability and maintenance, Operations management, Quality control and Six sigma, Lean manufacturing,
Occupational health and safety, Ergonomics, Automation and robotics, Conventional and non-traditional
manufacturing processes, Casting and welding, Surface engineering etc.
3
3
Sample output to test PDF Combine only
-
Scope of the Conference: CIMS – 2020
Authors are invited to submit their original and unpublished research articles for presentation in the following
research areas.
Supply Chain Management
Modeling and Simulation
Stochastic Modelling
Defense Logistics
Operations Management
Product Design and Development
Reliability and Maintenance
Sustainable Manufacturing
Technology Management
Environment Management System
Decision Science
TQM and Six Sigma
Theory of Constraints
Waste Management
Materials Management
Inventory System
Performance System
Optimization Algorithms
Business Analytics
Data Mining and Machine Learning
Digital Literacy
Quantitative Methods
Industrial Entrepreneurship
Sales & Operation Planning
Product Life cycle
Mass Customization
Marketing & Corporate Communication
Industry 4.0
Energy Management
Additive Manufacturing
Agile Manufacturing
Casting and Forming
Materials and Processing
Micro/Nano Processing
Non-Conventional
Machining
3 D printing
Optimization Methods
Tooling Rheology
Surface Engineering/Coatings
Welding Processes
Traditional Manufacturing
Ceramics and Alloys
Smart Biomaterials
Hybrid Manufacturing
Green Composites
Material Fabrication
Precision Manufacturing
High Speed Machining
Micro Structure Analysis
Industrial Automation
Cloud Computing
Artificial Intelligence
Fuzzy Expert System
Soft Computing
Condition Monitoring
Work Design and Ergonomics
Fracture Mechanics
CAD/CAM/CIM/CAPP
Renewable Energy
Other Allied Areas
Call for Papers / Posters
CIMS – 2020 invites original research papers from students, teachers, scientists and researchers in academia
and industry to be presented in the conference. The conference shall provide a platform to all for sharing their
research findings in the field of Industrial and Manufacturing Systems. For the more information and
guidelines please visit: http://www.nitj.ac.in/cims2020
Author Guidelines
The presenters should submit an abstract of approximately 300 words with Times New Roman, 12 point,
fonts in Windows-based Microsoft Word (.doc/.docx) document through the following Easy Chair link:
https://easychair.org/conference?conf=cims2020 and also by attaching an e-mail to [email protected] by
mentioning the Broad Area as mentioned under call for papers/posters section and Type of Presentation (i.e.
Oral or Poster) in the mail subject with other relevant details. The abstract shall be reviewed by a peer
committee. Selected manuscripts will be accepted for either oral or poster presentation. After the acceptance
of the abstract, the authors are required to submit the full paper again through the same link of easy chair. All
the templates and detailed guidelines are available at website: https://www.nitj.ac.in/cims2020
All the presented papers will be published as conference proceedings. Selected Papers of the CIMS-2020 will
be considered for publication in Scopus Indexed Journals/Springer/Emerald/CRC Press-Taylor &
Francis/IGI Global book series. The paper sent to the journal/book series should be the broadly extended
version of paper presented at CIMS-2020. For the same, authors should intimate to the conference organizers
CIMS-2020. The Peer-Review will be performed by the Journal itself. Kindly check the conference website
for latest updates and information regarding the publication partners.
Registration Information
At least one author of each accepted paper must register by 31st July, 2020 in order for the paper to be included
in the proceedings. Student registrations are only acceptable if first author of the paper is a full-time student
at an Institution. The registration fees for participation in the conference (CIMS - 2020).
4
4
Sample output to test PDF Combine only
https://easychair.org/my/conference?conf=cims2020mailto:[email protected]://www.nitj.ac.in/cims2020
-
Registration Fees
Last date of Registration July 31, 2020
Fee Details
Indian Foreign
Participants from Industry INR 8,000 USD 200
Participants from Academia INR 6,000 USD 100
Student Participants INR 4,000 USD 75
Attendees Only INR 1,000 USD 50
Important Dates
Abstract Submission March 15, 2020
Closed
Acceptance of Abstract March 20, 2020
Closed
Submission of Full length Manuscript July 15, 2020
Notification of Acceptance July 25, 2020
Registration starts Portal Already Open
Authors Registration ends July 31, 2020
Payment of Fees
Payment can be made by using any of the following options.
Through Online Gateway Transfer - The direct Payment Gateway Link is provided on the conference
website under Registration section (www.nitj.ac.in/cims2020).
Online Transfer (NEFT/RTGS) - The bank details are given below.
NAME OF ACCOUNT
HOLDER
CIMS IPE
BRANCH NAME G T ROAD JALANDHAR
BRANCH CODE 0046
ACCOUNT NO. 50100327885892
MICR CODE 144240002
IFSC CODE HDFC0000046
Demand Draft - In favor of “CIMS IPE” payable at Jalandhar.
Accommodation Guidelines
The Institute has limited accommodation in its Main and Mega Guest House. The registered delegates
will be provided the rooms in the guesthouses on payment basis on ‘first come first serve’ basis. For
student delegates, limited accommodation will be arranged in the hostels on campus at nominal charges.
5
5
Sample output to test PDF Combine only
http://www.nitj.ac.in/cims2020
-
International National
Prof. Angappa Gunasekaran, University of
Massachusetts USA
Prof. Guy Littlefair, Deakin University, United
Kingdom
Prof. Stephen T Newman, University of Bath
United Kingdom
Prof. Bhaskaran Gopalakrishnan, West Virginia
University, USA
Prof. Robert C. Creese, West Virginia
University, USA
Prof. Nagen Nagarur, Binghamton University,
NY
Prof. Mario T. Tabucanon, Asian Institute of
Technology (AIT), Thailand
Prof. Weiping Yu, NASA, USA
Prof. Frank Lambert, Georgia Tech, Atlanta
USA
Prof. Gyu M Lee, Pusan National University
Busan, Korea
Prof. Christopher Pung, Grand Valley
University, Michigan
Prof. Geice Villibor, Federal University of
Vicosa, Brazil
Prof. Parveen S. Goel, Director of Engineering &
Continuous Improvement (Pacific Region) Canada
Prof. O P Yadav, North Dakota State University,
USA
Prof. Harm-Jan Steenhuis, Hawaii Pacific Univ,
USA
Prof. Kapil Gupta, University of Johannesburg,
South Africa
Prof. Subash C. Sarin, Virginia Tech Univ. USA
Prof. Edmundas Kazimieras Zavadskas, Vilnius
Gediminas Technical University, Vilnius,
Lithuania
Prof. Irik Mukhametzyanov, Ufa State
Petroleum Technological University, Ufa, Russia
Prof. J Paulo Davim, University of Aveiro,
Portugal
Prof. Z J Pei, Texas University, USA
Prof. Ramesh Singh, University of Malaya,
Malaysia
Prof. Md. Mamun Habib, American
International University-Bangladesh (AIUB)
Prof. Shabbir A. Choudhuri, Grand Valley State
University, USA
Dr. Ram Maikala, Providence Reg. M C, USA
Dr. M N Qureshi, King Khalid University, Saudi
Arabia
Dr. Sachin Mangla, University of Plymouth,
United Kingdom
Dr. Kassaye Belete, University of Aksum
Ethiopia
Dr. Temesgen Berhanu, University of Aksum,
Ethiopia
Dr. Lokesh Saharan, Penn State University, USA
Dr. MehdiKeshavarz- Ghorabaee, Gonbad
Kavous University, Gonbad Kavous, Iran
Dr. Morteza Yazdani, Universidad Loyola
Andalucia, Spain
Dr. Dragan Pamučar, University of
Defence, Belgrade, Serbia
Prof. Rajiv Tripathi, Director,
MNNIT-Allahabad
Prof. Rakesh Sehgal, Director NIT-
Srinagar
Prof. Vinod Yadava, Director NIT-
Hamirpur
Prof. Praveen Kumar, Director, NIT
Delhi
Prof. Dheeraj Sanghi, Director,
PEC Chandigarh
Prof. P K Jain, Director, NIT Patna
Prof. M K Tiwari, Director NITIE
Mumbai
Prof. Satish Kumar, Director, NIT
Kuruskhetra (KKr)
Prof. Sehijpal Singh, Director
GNDEC, Ludhiana
Prof. T S Sidhu, Director SBSSTC
Firozpur
Prof. Pradeep Kumar, IIT-Roorkee
Prof. Dinesh Kumar, IIT-Roorkee
Prof. S G Deshmukh, IIT Delhi
Prof. S K Garg, PVC-DTU Delhi
Prof. Ravi Shankar, IIT- Delhi
Prof. Sushil, IIT- Delhi
Prof. P M Pandey, IIT-Delhi
Prof. P V Rao, IIT- Delhi
Prof. V N Achutha Naikan, IIT –
Kharagpur
Prof. L Vijayraghavan, IIT- Madras
Prof. Shankar Chakraborty,
Jadavpur University
Prof. Rakesh Narain, MNNIT,
Allahabad
Prof. Dinesh Khanduja, NIT-KKr
Prof. P C Tiwari, NIT-KKr
Prof. Pankaj Chandana, NIT-KKr
Prof. Samsher, DTU Delhi
Prof. M F Wani, NIT-Srinagar
Prof. Sandeep Singhal, NIT-KKr
Prof. Shailendra Kumar, SVNIT-
Surat
Prof. Hari Singh, NIT-KKr
Prof. Vikas Rastogi, DTU Delhi
Prof. Puneet Tandon, IIITDM,
Jabalpur
Prof. R. K. Garg, DCRUST
Prof. Qasim Murtaza, DTU, Delhi
Prof. R. S. Walia, PEC- Chandigarh
Prof. R S Jadoun, GBPUAT
Prof. R. Singri, DTU Delhi
Prof. R. K. Singh, MDI Gurugram
Prof. A S Shahi, SLIET Longowal
Prof. N M Suri, PEC Chandigarh
Prof. I.P.S. Ahuja, PU Patiala
Prof. P. K. Singh, SLIET Longowal
Prof. B S Pabla, NITTTR, Chd
Prof. S S Dhami, NITTT, Chd
Prof. Piyush Singhal, GLAU, UP
Prof. Kamal Sharma, GLAU, UP
Prof. Ajitanshu Vedrtnam, Invertis
Univ. Bareilly
Dr. Akshay Dvivedi, IIT-Roorkee
Dr. Mohit Law, IIT Kanpur
Dr. R. S. Mulik, IIT Roorkee
Dr. Sachin Choudhary, IIT-Ropar
Dr. Arvind Rajput, IIT Jammu
Dr. Saurabh Yadav, IIT-RAM
Dr. Rupesh Pati, IIM Kozhikode
Dr. Harish Kumar, NIT Delhi
Dr. Amit Kumar, NIT Patna
Dr. Abhishek Singh, NIT-Patna
Dr. Akhilesh Choudhary, NIT-
Hamirpur
Dr. P S Rao, NITTTR, Chd
Dr. Dilshad Khan, NIT-Hamirpur
Dr. H S Pali, NIT-Srinagar
Dr. Pankaj Gupta, MNIT-Jaipur
Dr. Dinesh Kumar, NIT-
Jamshedpur
Dr. Chandan Pandey, IIT –
Jodhpur
Dr. Manoj Kumar, NIT-Srinagar
Dr. Nitin Lautre, VNIT Nagpur
Dr. P V Kane, VNIT Nagpur
Dr. N R Chauhan, IGDTU Delhi
Dr. Pravin Kumar, DTU Delhi
Dr. Niranjan, DTU Delhi
Dr. Saurabh Agarwal, DTU Delhi
Dr. Subhas NIT- Jamshedpur
Dr. Faisal Talib, AMU
Dr. Faisal Hasan, AMU
Dr. Lalit Thakur, NIT-KKr
Dr. Joy Mishra, NIT-KKr
Dr. Jageshwar Verma, NIFFT-
Ranchi
Dr. M M Goud, PEC Chd.
Dr. C S Jawalkar, PEC Chd.
Dr. Suman Kant, PEC Chd.
Dr. Sarbjeet Singh, PEC Chd.
Dr. Anup Malik, MNIT-Jaipur
Dr. Mangey Ram, GEHU, Ddn
Dr. Deepa Mudgal, TU Patiala
Dr. Vivek Jain, Thapar University
Dr. Ravi Kant, GBPIET, Pauri
Dr. K.K. Dhakar, SGSITS, Indore
Dr. Gagandeep Bhardwaj, TU
Patiala
Dr. Prasenjit Chatterjee, MCKV,
Kolkata
Dr. S M Pandey, DTU, Delhi
Dr. Kuldeep Saxena, GLAU, UP
Dr. Pradeep Jindal, YCOE,
Talwandi saboo
Dr. Tejeet Singh, SBSSTC
Dr. Sumit Tiwari, SNU, G. Noida
Dr. Priyank Srivastava, Amity
University, Noida
Dr. Pallav Gupta, Amity
University, Noida
Dr. Sumit Gupta, Amity
University, Noida
Dr. Balbir Singh, SMVDU
Dr. Jujhar Singh, IKGPTU
Dr. Md. Javaid, JMI, Delhi
Dr. Ravinder Kataria, LPU
Dr. Chander Prakash, LPU
Technical Advisory Committee 6
6
Sample output to test PDF Combine only
-
• Prof. A Mukhopadhyay • Prof. S K Sinha • Prof. A L Sangal • Prof. H K Verma • Prof. Subhash Chander • Prof. Vinay Midha • Prof. B S Saini • Er. R K Bansal • Dr. Rajeev Jindal • Dr. Pramod Kumar • Dr. Rohit Mehra • Dr. Jagwinder Singh • Dr. S Bajpai • Dr. L P Singh • Dr. S S Bhadauria • Dr. Mamta Khosla • Dr. Geeta Sikka
• Dr. Lalit Jajpura • Dr. O P Verma • Dr. Amit K Singh • Dr. Karanveer Singh • Dr. Manoj Kumar • Dr. Sumit Sharma • Dr. Nitin Sharma • Dr. Dwesh Kumar • Dr. Saurabh Kango • Dr. Satyender Singh • Dr. Rajan Kumar • Dr. Sanjay • Dr. Pawan Verma • Dr. Afzal Sikander • Dr. Nitin N Pandhare • Dr. Sunil Dutt • Dr. Abhinav Pratap Singh
• Dr. Anurag Tiwari • Dr. Vinod Ashokan • Dr. Gyan Prakash • Dr. Senthil K • Dr. S Rupali • Dr. Mahesh Patel • Dr. Samayveer Singh • Dr. Nonita Sharma • Dr. Anee Mohanty • Dr. Indu Chauhan • Dr. Sumer Meena • Dr. Tarlochan Singh • Dr. Rajeev Kumar • Dr. Preeti Puri • Dr. Shyamkiran Kaur • Dr. Kiran Singh • Mr. Bhupinderjeet Singh
Institute Coordination Committee 7
7
Sample output to test PDF Combine only
-
ORGANIZING COMMITTEE
Prof. Lalit Kumar Awasthi
Director, NIT Jalandhar
Prof. R K Garg Prof. Arvind Bhardwaj Prof. Anish Sachdeva
Prof. Vishal Sharma Dr. Ajay Gupta Dr. Rajeev Trehan
Dr. Mohit Tyagi Dr. Dilbagh Panchal Dr. Ravi Pratap Singh
Dr. S K Mishra Dr. Pamita Awasthi Dr. Rakesh Kumar
Prof. R S Walia Dr. Manish Gupta Dr. Harish Kumar Dr. Abhishek Singh
Dr. Kapil Goyal Dr. Varun Sharma Dr. Narendra Kumar Dr. Rajeev Verma
Dr. Aviral Mishra Dr. Gurraj Singh
Patron
Conference Chairs
Organizing Secretaries
Joint Organizing Secretaries
Conveners
Conference Secretariat
CIMS – 2020
Department of Industrial & Production Engineering
Dr B R Ambedkar National Institute of Technology Jalandhar-144011, Punjab, INDIA
Contact Details: +91 - 8826841126, 9639965310, 9411001551
E-mail: [email protected] web: http://www.nitj.ac.in/cims2020
Conference Co-Chairs
8
8
Sample output to test PDF Combine only
-
Nearby Places to Visit
0
Devi Talab Mandir, Jalandhar
Jung-E-Azadi Memorial, kartarpur
Golden temple, amritsar
Attari wagah border, amritsar
Jallianwala bagh, amritsar
… and many other places.
Contact:
Organizing Secretaries
CIMS - 2020
Department of Industrial & Production Engineering
Dr B R Ambedkar National Institute of Technology Jalandhar-144011, Punjab, INDIA
Phone Nos.: +91 - 8826841126, 9639965310, 9411001551 FAX: +91 181 2690932 E-mail: [email protected]; web: www.nitj.ac.in/cims2020
9
9
Sample output to test PDF Combine only
Main PageMid Pages Edited ColorSecond last PageEnd Page