interlok no bolt · 12 f industrial steel shelving catalog end panels end panels description:...
TRANSCRIPT
WWW.METALWARE.CA
INTERLOK NO BOLT
2 F Industrial Steel Shelving Catalog
Starter unit Add-on unit
A - AdobeB - BlueL - Light GreyO - Off WhiteX - Dark Grey
METALWARE
When ordering, product codes must be completed as follows:Base code + Colour code
EXAMPLE:Shelf - 18 gauge 12” x 36” in light grey = S1236L
3Industrial Steel Shelving Catalog F
HISTORY
History:
Shelf Clip:
Established by brothers Irving and Ben Levitt in 1950 on Upper Lachine Road in downtown Montreal, Met-alware is the oldest shelving manufacturer in Canada. Not long after its inception, Metalware received its first patent in 1954, and became the first company to market bolt-less shelving.
In the following years, Metalware’s signature product - the No-Bolt Interlok Shelving system - became widely used in a variety of sectors, including:
F Commercial (Car Dealers, Hardware)F Government (Min. of Revenue, National Defence)F Industrial (Aircraft, Automotive, Pulp & Paper)F Offices (Medical, Law)
Today, after sixty plus years of continuous growth, Metalware makes its home in a forty thousand square foot complex which houses its dedicated employees. Having achieved distribution throughout Canada and the United States, and having reached overseas markets, Metalware continues to direct its attention towards pursuing advancements in the shelving industry.
Economy: Assembly cost is a vital factor. Interlok No-Bolt saves up to 80% of assembly time.
Efficiency: Shelves can easily be rearranged and all component parts installed without dismantling. Interlok No-Bolt is the only shelving completely assembled in an upright position. There is no additional floor space needed for the process of assembly. Shelf Clip: 12-gauge compression type; cadmium plated.
4 F Industrial Steel Shelving Catalog
DISPLAYS
5Industrial Steel Shelving Catalog F
DISPLAYS
metalware.ca
6 F Industrial Steel Shelving Catalog
SHELF 18 GAUGE
Shelf - 18 gauge
Description:
Sizes:
Cross section:
Material:
Components:
Accessories:
This shelf is double folded with closed corners and has a two way locking principal at each corner.
12’’ x 36’’ S1236 600 lbs15’’ x 36’’ S1536 600 lbs18’’ X 36’’ S1836 600 lbs24’’ X 36’’ S2436 600 lbs30’’ X 36’’ S3036 350 lbs
12’’ X 42’’ S1242 500 lbs15’’ X 42’’ S1542 500 lbs16’’ X 42’’ S1642 500 lbs18’’ X 42’’ S1842 500 lbs24’’ X 42’’ S2442 500 lbs30’’ X 42’’ S3042 525 lbs32’’ X 42’’ S3242 525 lbs
12’’ X 48’’ S1248 350 lbs15’’ X 48’’ S1548 350 lbs18’’ X 48’’ S1848 350 lbs24’’ X 48’’ S2448 310 lbs
18 gauge steel, painted
Shelf clips
Dividers, bin fronts, label holders, shelf reinforcements
Capacity**
**Evenly distributed loads
Base code*
*Add colour code when ordering see p2
metalware.ca
7Industrial Steel Shelving Catalog F
18 gauge steel, painted
Shelf clips
Dividers, bin fronts, label holders, shelf reinforcements
Shelf - 20 gauge box
SHELF 20 GAUGE BOX
Sizes:
Cross section:
Material:
Components:
Accessories:
Description:
12’’ x 36’’ IBS1236 800 lbs15’’ x 36’’ IBS1536 800 lbs18’’ X 36’’ IBS1836 800 lbs24’’ X 36’’ IBS2436 800 lbs30’’ X 36’’ IBS3036 500 lbs
12’’ X 42’’ IBS1242 650 lbs15’’ X 42’’ IBS1542 650 lbs16’’ X 42’’ IBS1642 650 lbs18’’ X 42’’ IBS1842 650 lbs24’’ X 42’’ IBS2442 650 lbs30’’ X 42’’ IBS3042 600 lbs32’’ X 42’’ IBS3242 575 lbs
12’’ X 48’’ IBS1248 550 lbs15’’ X 48’’ IBS1548 550 lbs18’’ X 48’’ IBS1848 575 lbs24’’ X 48’’ IBS2448 600 lbs
This shelf has a box structure that uses lighter gauge steel than the 18 gauge regu-lar shelf but it has a heavier load capacity.
Shelf clips
20 gauge steel, painted
Dividers, bin fronts, label holders, shelf reinforcements
Base code* Capacity**
**Evenly distributed loads*Add colour code when ordering see p2
metalware.ca
8 F Industrial Steel Shelving Catalog
T POST
T post
Description:
Sizes:
Material:
Components:
Accessories:
The “T” post is roll formed and welded at 4” centers. It has a smooth non perforated front face while the sides have perfora-tions at 2” centers to allow for adjustment of the shelves.
Foot plate, mezzanine splice bracket, back to back tie clips, end cap tie clips
None
16 gauge steel, painted
3’4’’ P406’4’’ P767’4’’ P888’4’’ P1009’4’’ P11210’4’’ P124
Base code*
*Add colour code when ordering see p2
metalware.ca
9Industrial Steel Shelving Catalog F
Foot plate, mezzanine splice bracket, back to back tie clips, end cap tie clips
None
16 gauge steel, painted
FOOTPLATES & SHIMS
Foot plates
Shims
Model:
Model:
Material:
Material:
Components:
Components:
Accessories:
Accessories:
Description:
Description:
Short shelf clip, lock nuts and bolts
None
Shims
None
13 gauge (1/16’’) steel, galvanized
10 gauge (3/16’’) steel, galvanized
FP
SHIMS
Used to secure the posts to the ground. Includes short shelf clip to allow bottom shelf to be installed. Anchors not included.
Used to elevate posts when flooring is not level.
Base code*
Base code*
*Add colour code when ordering see p2
metalware.ca
10 F Industrial Steel Shelving Catalog
BRACES
Side braces
Back braces
Description:
Description:
Sizes:
Model:
Material:
Material:
Components:
Components:
Accessories:
Accessories:
Side braces are flat steel bars perfo-rated at each end for nuts and bolts, used to stabilize the units. They are sold as a pair.
Back braces are flat steel bars with swivel tips perforated at each end for nuts and bolts, used to stabilize the units. Sold as a pair.
None
None
12 gauge steel, painted
12 gauge steel, painted
Nuts & bolts grade 5
Nuts & bolts grade 5
37’’ SB (12’’, 15’’, 18’’ and 24’’ deep shelves)43’’ SB43 (16’’ and 32’’ deep shelves)48’’ SB48 (30’’ and 36’’ deep shelves)
59 9/16’’ BB (Universal Size)
Base code*
Base code*
*Add colour code when ordering see p2
metalware.ca
11Industrial Steel Shelving Catalog F
None
None
12 gauge steel, painted
12 gauge steel, painted
Nuts & bolts grade 5
Nuts & bolts grade 5
GUSSETS
Gussets
Sizes:
Material:
Components:
Accessories:
Description:
14 gauge steel, painted
Nuts & bolts grade 5, Nuts & bolts flat head
Gussets are sold as a pair, left and right. They replace the back braces as a way to stabilize the unit and allow access to the shelving from both sides.
None
G (sold as a pair)Base code*
*Add colour code when ordering see p2
metalware.ca
12 F Industrial Steel Shelving Catalog
END PANELS
End panels
Description:
Sizes:
Material:
Components:
Accessories:
16 & 24 gauge steel, painted
None
Foot plates, mezzanine splice bracket, back to back tie clips, end cap tie clips
The end panel is used to close off a unit from the side. It replaces the 2 posts and side braces. It is made of a 24 gauge steel panel welded to the 16 gauge steel posts.
12’’ x 3’4’’ EP124012’’ x 6’4’’ EP127612’’ x 7’4’’ EP128812’’ x 8’4’’ EP1210012’’ x 9’4’’ EP1211212’’ x 10’4’’ EP1212415’’ x 3’4’’ EP154015’’ x 6’4’’ EP157615’’ x 7’4’’ EP158815’’ x 8’4’’ EP1510015’’ x 9’4’’ EP1511215’’ x 10’4’’ EP1512418’’ x 3’4’’ EP184018’’ x 6’4’’ EP1876
18’’ x 7’4’’ EP188818’’ x 8’4’’ EP1810018’’ x 9’4’’ EP1811218’’ x 10’4’’ EP1812424’’ x 3’4’’ EP244024’’ x 6’4’’ EP247624’’ x 7’4’’ EP248824’’ x 8’4’’ EP2410024’’ x 9’4’’ EP2411224’’ x 10’4’’ EP2412430’’ x 3’4’’ EP304030’’ x 6’4’’ EP307630’’ x 7’4’’ EP308830’’ x 8’4’’ EP30100
Base code* Base code*
*Add colour code when ordering see p2
metalware.ca
13Industrial Steel Shelving Catalog F
16 & 24 gauge steel, painted
None
Foot plates, mezzanine splice bracket, back to back tie clips, end cap tie clips
BACK PANELS
Back panels
Sizes:
Material:
Components:
Accessories:
Description:
24 gauge steel, painted
Nuts & bolts grade 5, back panel clips
The back panel closes off the unit from the back and replaces back braces or gussets. It is a flat sheet of steel, perforated on each side to attach to the post or an end panel.
None
36’’ x 3’4’’ BP364036’’ x 4’4’’ BP365236’’ x 6’4’’ BP367636’’ x 7’4’’ BP368836’’ x 8’4’’ BP36100 42’’ x 3’4’’ BP424042’’ x 4’4’’ BP425242’’ x 6’4’’ BP427642’’ x 7’4’’ BP428842’’ x 8’4’’ BP4210048’’ x 3’4’’ BP484048’’ x 4’4’’ BP485248’’ x 6’4’’ BP487648’’ x 7’4’’ BP488848’’ x 8’4’’ BP48100
Base code*
*Add colour code when ordering see p2
metalware.ca
14 F Industrial Steel Shelving Catalog
Decorative end panels
Description:
Sizes:
Material:
Components:
Accessories:
16 & 24 gauge steel, painted
Shelf clips
None
Used to finish off the end of a row with a flush panel that hides the side of the unit and finish flush with the exterior of the post. This piece is attached to existing posts on the outside.
12’’ x 3’4’’ DEP124012’’ x 6’4’’ DEP127612’’ x 7’4’’ DEP128812’’ x 3’4’’ DEP124012’’ x 6’4’’ DEP127612’’ x 7’4’’ DEP128812’’ x 3’4’’ DEP124012’’ x 6’4’’ DEP127612’’ x 7’4’’ DEP128812’’ x 3’4’’ DEP124012’’ x 6’4’’ DEP127612’’ x 7’4’’ DEP1288
DECORATIVE END PANELS
Base code*
*Add colour code when ordering see p2
metalware.ca
15Industrial Steel Shelving Catalog F
16 & 24 gauge steel, painted
Shelf clips
None
SHELF REINFORCEMENTS & BASE PLATES
Shelf reinforcements
Base plates
Sizes:
Sizes:
Material:
Material:
Components:
Components:
Accessories:
Accessories:
Description:
Description: Inserted into the front and/or back of the 18 gauge standard shelves to add extra capacity. Front and back pieces sold individually.
The base plate is used to close off the bottom of the shelving unit to stop items from rolling underneath. It is installed with plastic base snaps.
36’’ SR3642’’ SR4248’’ SR48
3’’ x 36’’ BP363’’ x 42’’ BP423’’ x 48’’ BP48
Nuts & bolts flat head
Base snaps
None
None
12 gauge steel, galvanized
18 gauge steel, painted
Base code*
Base code*
*Add colour code when ordering see p2
metalware.ca
16 F Industrial Steel Shelving Catalog
Bin front
Description:
Sizes:
Material:
Components:
Accessories:
The bin fronts are placed at the front of the shelf to stop small items from falling or rolling off the shelf.
1’’ x 36’’ BF1362’’ x 36’’ BF2363’’ x 36’’ BF3361’’ x 42’’ BF1422’’ x 42’’ BF2423’’ x 42’’ BF3421’’ x 48’’ BF1482’’ x 48’’ BF2483’’ x 48’’ BF348
20 gauge steel, painted
Bin front clips or nuts & bolts flat head
Dividers, label holders
BIN FRONT
Base code*
*Add colour code when ordering see p2
metalware.ca
17Industrial Steel Shelving Catalog F
Dividers
Sizes:
Material:
Components:
Accessories:
Note:
Description:
6’’ x 12’’ D6128’’ x 12’’ D81210’’ x 12’’ D101212’’ x 12’’ D121214’’ x 12’’ D14126’’ x 15’’ D6158’’ x 15’’ D81510’’ x 15’’ D101512’’ x 15’’ D121514’’ x 15’’ D1415
6’’ x 18’’ D6188’’ x 18’’ D81810’’ x 18’’ D101812’’ x 18’’ D121814’’ x 18’’ D14186’’ x 24’’ D6248’’ x 24’’ D82410’’ x 24’’ D102412’’ x 24’’ D122414’’ x 24’’ D1424
The divider is used to make compartments on the shelf. It has a rolled front for a smooth edge and attaches with divider clips or flat head nuts and bolts.
24 gauge steel, painted
Divider clips or nuts & bolts flat head
Bin fronts
To measure the height of a divider: measure from the top of the bottom shelf where the divider will be installed, to the top of the shelf above.
DIVIDERS
Base code* Base code*
*Add colour code when ordering see p2
metalware.ca
18 F Industrial Steel Shelving Catalog
BIN FRONT & SHELF BOXES
Shelf boxes
Description:
Sizes:
Material:
Components:
Accessories:
2 3/4’’ x 5 5/8’’ x 12’’ SB25122 3/4’’ x 11 5/8’’ x 12’’ SB211124 3/4’’ x 5 5/8’’ x 12’’ SB4512
2 3/4’’ x 5 5/8’’ x 15’’ SB25152 3/4’’ x 11 5/8’’ x 15’’ SB211154 3/4’’ x 5 5/8’’ x 15’’ SB4515
2 3/4’’ x 5 5/8’’ x 18’’ SB25122 3/4’’ x 11 5/8’’ x 18’’ SB211124 3/4’’ x 5 5/8’’ x 18’’ SB4518
The shelf boxes are used to hold small items on the shelves.
20 gauge steel, painted
Galvanized shelf box dividers
None
Base code*
*Add colour code when ordering see p2
metalware.ca
19Industrial Steel Shelving Catalog F
LABEL HOLDER
Label holder
Sizes:
Material:
Components:
Accessories:
Description:
1’’ x 36’’ LH1362’’ x 36’’ LH2363’’ x 36’’ LH336
The label holders allow users to insert labels which will help identify the contents of the shelf. They are clipped on with divider clips to the front of the shelf.
24 gauge steel, painted
Divider clips
None
Base code*
*Add colour code when ordering see p2
metalware.ca
20 F Industrial Steel Shelving Catalog
SWINGING DOORS
Swinging doors
Swinging door frames
Description:
Description:
Sizes:
Sizes:
Material:
Material:
Components:
Components:
Accessories:
Accessories:
18 gauge steel, painted
18 gauge steel, painted
The swinging doors are installed on the front of a unit and come with a locking handle. They are available in sets.
The door frames are used to create a space between the unit and the doors. This extra space is required when using modular drawers or shelf boxes.
36’’ x 3’4’’ DR364036’’ x 6’4’’ DR367636’’ x 7’4’’ DR368836’’ x 8’4’’ DR36100
36’’ x 7’4’’ DRF3688
Nuts & bolts grade 5
Tech screws
None
Swinging doors
Base code*
Base code*
*Add colour code when ordering see p2
metalware.ca
21Industrial Steel Shelving Catalog F
18 gauge steel, painted
Nuts & bolts grade 5
None
HANGING BARS
Hanging bars
Hanging bar mounting bracket
Sizes:
Model:
Material:
Material:
Components:
Components:
Accessories:
Accessories:
Description:
Description:
Placed on the hanging bar mounting bracket to allow items to be suspended inside the unit.
Attaches to the posts to support the hanging bar. Held in position with shelf clips.
HB36HB42HB48
HMB24
Hanging bar mounting brackets
Hanging bar
None
Shelf clips
16 gauge steel, painted
14 gauge steel, painted
Base code*
Base code*
*Add colour code when ordering see p2
metalware.ca
22 F Industrial Steel Shelving Catalog
MEZZANINES
Mezzanine floor channel
Description:
Sizes:
Material:
Components:
Accessories:
14 gauge steel, painted
Pin locks, nuts & bolts grade 5
Mezzanine cross aisle channel
Attaches to the post to create a support for the catwalk flooring on hi-rise units.
30’’ MFC3036’’ MFC3642’’ MFC4245’’ MFC4548’’ MFC48
Cross aisle bracket Down aisle bracket
Model: Model:CAB DAB
Base code*
Base code* Base code*
Material:
Components:
Accessories:
13 gauge steel, painted
Nuts & bolts 5/16
None
Description: Used for top ties and full deck mezzanine
*Add colour code when ordering see p2
metalware.ca
23Industrial Steel Shelving Catalog F
14 gauge steel, painted
13 gauge steel, painted
MEZZANINES
Mezzanine cross aisle channel
Mezzanine splice bracket
Sizes:
Model:
Material:
Material:
Components:
Components:
Accessories:
Accessories:
Description:
12 gauge steel, galvaized
Nuts and bolts
Posts, end panels
14 gauge steel, painted
Lugs, nuts & bolts 5/16
Mezzanine floor channel
36’’ MCC3642’’ MCC4248’’ MCC4854’’ MCC5460’’ MCC60
Used to create a support for flooring between mezzanine floor channels at the center aisle.
MSB4
Base code*
Base code*
Description: Used to connect two posts vertically.
*Add colour code when ordering see p2
24 F Industrial Steel Shelving Catalog
HARDWARE
Nuts & bolts flat head Nuts & bolts grade 5
Lugs
Short shelf clip
Lock nuts and bolts
Shelf clip
Back panel clipGuard rail clip
Model: Model:
Model: Model:
Model: Model:
Model: Model:
NBF
NBL
XSC
GRC
XNB5
L
XSCFP
XBPC
25Industrial Steel Shelving Catalog F
HARDWARE
Divider clip Pin lock
Bin front clip 3’’Bin front clip 2’’
Back to tie clip
End cap tie clipBase snap
Model: Model:
Model: Model:
Model: Model:
Model:
XDC
XBFC2
XBS
XBBTC
PIN/LOCK
XBFC3
ETC
26 F Industrial Steel Shelving Catalog
SHOWCASE
27Industrial Steel Shelving Catalog F
QUICK REFERENCE