interdrain gxg 412 - geomat · consultation please contact technical department by e-mail:...
TRANSCRIPT
Page 1 of 2 TS_GXG_EN_A_19_01
Interdrain
Tensile Strength ElongationDynamic
Perforation(Cone drop
test)
StaticPuncture
(CBR)Thicknessat 2 kPa Weight
Roll
longitudinal transverse longitudinal transverse width length area weight [kN/m] [kN/m] [%] [%] [mm] [kN] [mm] [g/m2] [m] [m] [m2] [kg]
EN ISO 10319EN ISO13433
EN ISO12236
EN ISO9863
EN ISO9864
GXG 412 18 16 40 50 12 2,8 4,5 640 1,95 50 97,5 62,5GXG 412 18 16 40 50 12 2,8 4,5 640 3,90 70 273,0 175,0GXG 512 19 17 40 50 30 1,4 5,5 790 4,00 50 200,0 130,0
Remarks:
The product has on each side of the geotextile overlaps the size of at least 10 cm. These simplify installation and prevent the penetration ofthe soil.
Unless indicated otherwise, values are determined according to the applicable European standards and are valid as of the date of thisdocument. Products are subject to continuous development and improvement and these values may change over time.
In case of requirement the delivery of products with different dimensions or other technical data or in the case of interest of technicalconsultation please contact technical department by e-mail: [email protected].
Page 2 of 2 TS_GXG_EN_A_19_01
InterdrainWater permeability in the plane with the hydraulic gradient 1,0 and
Opening Size (for geotextile)20 kPa 50 kPa 200 kPa [l/m/s] [l/m/s] [l/m/s] [mm] EN ISO 12958 EN ISO 12956
GXG 412 0,62 0,51 0,35 0,10GXG 412 0,62 0,51 0,35 0,10GXG 512 0,82 0,75 0,55 0,12