interconnection services bst customized lsog 6 forms overview sherry porter march 23, 2004
TRANSCRIPT
InterconnectionServices
BST customized LSOG 6 forms are located on the interconnection website under the Tools, Forms & Reports tab
InterconnectionServices
Selecting Forms & Templates will take the user to the Templates and Forms web page
InterconnectionServices
Selecting BST customized LSOG 6 Forms will direct the user to LSOG 6 Form web page
The user should follow web instructions and download form flow controls before using the BST customized LSOG 6 forms.
InterconnectionServices
After reading web form instructions, downloading form flow controls, and establishing a Data folder the user is ready to begin completing forms and building data records.
InterconnectionServices
Completing and saving a record (The user should select the form they wish to complete)
InterconnectionServices
Selecting a RF (Form) will return (1st time) a blank form to the user
Note the record tool bar automatically creates the record number for the user
InterconnectionServices
The user is now ready to populate the form fields and save the record (for demonstration purposes we have populated a few fields on the form)
After completing the form the user should select the save button to save the form record (Note: The web form will not save to
Computer hard-drive. The record is saved on the web
InterconnectionServices
To create a new record the user should select the New button on the record tool bar.
(Note: The form flow form automatically creates the new record)
InterconnectionServices
The user may populate the form and save the record by selecting the save button
InterconnectionServices
The next time the user accesses the RF form via the web, the form flow will automatically display the last record, to return to a previous record the user can depress the arrow keys to go back to previous records
InterconnectionServices
BellSouth Customized LSOG 6 Forms (Word Format)
BellSouth® Customized LSOG 6 forms
•Available in Micro Soft ® Word format
•Lock/Un-Lock function
•Pull down menu selection available for some fields
•Can be stored on user hard-drive
InterconnectionServices
ELMS 6/LSOG 6 Form Overview **Note: This is a high-level overview of the changes associated with
LSOG 6 forms, the list of changes is not intended to be inclusive and does not represent fields not supported by BellSouth which are
displayed on the LSOG 6 forms.
ELMS-EDI LSOG Mechanization Specification
6- Represents the LSOG Form Version Number
LSOG-Local Service Ordering Guideline
InterconnectionServices
Significant Impacts
•Local Service Freeze
•Resale Private Line
•DID
•Directory Listings
•Wireless LNP
•Partial Migrations
InterconnectionServices
LSR
Partial Migrations-ACT of P and Q will be eliminated and replaced with a new MI (Migration Indicator) field.
LSCP-(Local Service Change Prohibited) New field on the LSR replaces SPEC for Local Service Freeze (LSF).
MEU-(Multiple End User) New field on the LSR used for ordering DPA (Different Premise Address)
MI- (Migration Indicator) New field on the LSR replaces ACT of P and Q identifies partial or full migrations
NOR-(Number of Request) New field on the LSR associated with the RPON field
P-(Product) New field on the LSR used to identify the platform product for DID/DOD/PBX
RESID-(Response Identifier) This field is currently mapped electronically will now be valid on the manual ordering form
SLI-(Sub-Loop Indicator) Identifies the type of sub-loop ordered and is valid for manual ordering only
TOS-Opened up 4th character of this field, and added new 2nd character TOS of Q for DID
REQTYP-Added new REQTYP K for Resale Private Line (Manual Ordering only)
InterconnectionServices
EU
AAI-(Additional Address Information) replaces SADLO
LD1-(Location Designator 1) replaces BLDG-EU
LD2-(Location Designator 2) replaces Floor-EU
LD3-(Location Designator 3) replaces Room-EU
LV1-(Location Value 1) New field associated with LD1 field
LV2 (Location Value 2) New field associated with LD2 field
LV3 (Location Value 3) New field associated with LD3 field
ELT- (End User Listing Treatment) replaces ERL
EUA-(End User Activity) New field works with MEU
InterconnectionServices
Resale Private Line
New REQTYP=K
New Form- (Manual Ordering only) approximately 140 new fields
InterconnectionServices
DID/DOD/PBX
New Form/ScreenThe new form/screen incorporates all 3 platforms for ordering (Resale, UNE-P, and UNE (Stand alone Port)
Combines PBX and DID on one form
Unique REQTYP N (for all 3 ordering platforms)
Platform determined by P field on LSR
Unique TOS for DID and PBX
New 4th character of TOS to identify hotel/motel and hospital service
Form/Screen divided into sections for trunks and telephone number activity
InterconnectionServices
DL
DSCR Form- eliminated, caption fields combined with DL form
PLS-(Prior Level Status) new field replaces INSI and HS
PLINFO-(Prior Level Information) new field replaces INTEXT and INADDR
PLTN-(Prior Level Telephone Number) new field replaces HTN, HNSTN, INTN and INNSTN
FAINFO-(File After Information) new field replaces SEQTEXT, SEQADDR, SEQTEXT1 and SEQADDR1
FATN-(File After Telephone Number) new field replaces SEQTN and SEQTN1
LD1, LD2, LD3-(Location Designator 1, 2, 3) new fields replaces DDALO
LV1, LV2, LV3-(Location Value 1, 2, 3) new fields associated with LD1, LD2 and LD3
AAI (Additional Address Information) new field replaces DDADLO
CITY-new field replaces DDALOC
STATE-new field replaces DDAST
ZIP-new field replaces DDAZC