intelligent fixture - douglas lighting controls · 1 - + 2 1 - + 2 0.85” (21.50mm) 1.41”...
TRANSCRIPT
-
INTELLIGENT FIXTURE SENSORS & CONTROLLERSLuminaire Level Lighting Controls
Add functionality and IoT readiness to your luminaires with an easy to install system.
Applications
• Office• Retail• Industrial• Healthcare• Education
SENSORS &CONTROLLERS
https://www.douglaslightingcontrols.com/https://unvlt.com/
-
By incorporating the same technology in both small and large systems, IFS and IFC are specially designed to support small individual offices or to easily scale up to large commercial spaces, delivering compatibility, reliability, and commonality to the entire facility.
Features• Sensor and sensor-less models for cost effective scalability• Two 0-10V channels to support standard and tunable white LED drivers• DIM-to-OFF for effective dimming and energy efficient functionality• The IFC has built-in UL924 capabilities without any additional wiring• Small form factor to fit into standard ½ inch electrical knockouts• Bluetooth wireless technology for security and reliability• Bluetooth beacons for IoT and location services strategies
IFS installed in the EVERLINE LEDVolumetric Luminaire (VLA)
Douglas Lighting Controls’ Intelligent Fixture Sensors (IFS) and Intelligent Fixture Controllers (IFC) are designed to be integrated directly into luminaires. These Luminaire Level Lighting Controls (LLLC) can be deployed as independent occupancy and daylight fixture sensors, or easily networked with controllers using the Bluetooth® App for room, area, or floor lighting controls. The devices are part of our Dialog family of networked lighting controls solutions. This allows them to communicate with other Dialog wireless switches, sensors, and load controllers and our wired Dialog system for building-wide advanced lighting controls strategies.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc. and any use of such marks by Panasonic is under license.Other trademarks and trade names are those of their respective owners.
Improve building performance, maximize energy savings, increase occupant satisfaction
Sensor Controller
For a list of DesignLights Consortium® QPL listed products please visitwww.designlights.org/lighting-controls/search/
ASHRAE 90.1 Compliant
California
Compliant24TITLE
- - -
- -
- -
- - -
- - - - - - - - - - - - - - -
https://www.douglaslightingcontrols.com/https://unvlt.com/https://www.designlights.org/lighting-controls/search/
-
The IFC and IFS support single and dual channel 0-10V dimming LED drivers and are powered by the driver’s 12VDC or 24VDC auxiliary power output. They are designed to fit directly into standard ½” electrical knockouts and are networked using Bluetooth Wireless Technology. The system is commissioned and configured via a free app on the iTunes App Store (BTCC). This app uses the on-board Bluetooth Technology on the iOS product to configure and commission the devices and system.
IFC and IFS are also part of our wireless lighting control ecosystem which includes load controllers, occupancy/daylight sensors, and wall station switches, each using Bluetooth communication technology. The Douglas Bluetooth system is ASHRE 2016, Title 24, and WSEC compliant. It can provide all the necessary control schemes for Occupancy (Occupancy, Vacancy, Partial ON, Partial OFF), Primary & Secondary Daylight Harvesting, and Demand Response.
Bluetooth Lighting Control Ecosystem
Design, Dimensions, Specifications
Overview
1 - + 2
1 - + 2
0.85”(21.50mm)
1.41”(35.90mm)
0.23” (5.95mm)
Gateway
Dialog LightingControl Unit
A Gateway device is available for connectivity into Dialog
centralized system. Commissioning and Room Control App
Wall Station Switch Plug Load Controller
Sensor SensorController Controller
PART NUMBER • BT-IFS-A • BT-IFC-A
NAME • Intelligent Fixture Sensor • Intelligent Fixture Controller
FUNCTIONALITY
• 0-10V Dimming with DIM-to-OFF (LED Driver dependent)• Occupancy, Vacancy, Partial ON, & Partial OFF• Adjustable Occupancy Timeout: 5 to 90 minutes• Primary & Secondary Daylight Harvesting (CLC)• Bluetooth beacon for digital ceiling, IoT, and location services strategies• Commissioning via BTCC App on the iTunes Store
• 0-10V Dimming with DIM-to-OFF (LED Driver dependent)• Listed for emergency lighting control when used on a dedicated emergency
power bus• Occupancy and daylighting control features as shown at left when networked
with one or more BT-IFS-A sensors • Bluetooth beacon for digital ceiling, IoT, and location services strategies• Commissioning via BTCC App on the iTunes Store• UL924 certified devices for Emergency Fixtures
OCC. SENSOR MOUNTING HEIGHT
• Up to 16.4ft (5m) • Not applicable
WIRING • Use #20 to #26 AWG solid copper conductors stripped to 4mm
INPUT VOLTAGE • 12VDC – 26.5VDC
WIRELESS RANGE• 150ft Clear line of sight, 50ft through standard walls• Distances may vary based on location and environment• Additional devices may be required at time of commissioning to ensure Bluetooth network integrity
ENVIRONMENT• Indoor, stationary, non-vibrating, non-corrosive atmosphere, and non-condensing humidity• Operating temperature: 32°F to 131°F (0°C to 55°C)• Storage temperature: -40°F to 140°F (-40°C to 60°C)
DIMMING• Two 0-10V dimming channels, each capable of sinking up to 25mA• Typical use is with single channel 0-10V LED drivers providing auxiliary output power and DIM-to-OFF capability• May also be used with dual-channel, tunable white LED drivers providing auxiliary output power and DIM-to-OFF capability
CERTIFICATIONS• UL916, UL2043 (Plenum), UL924 (Emergency Lighting - BT - IFC only)• May be installed through a knockout in the luminaire wiring enclosure or installed external to the enclosure and powered with a Class 2 circuit using Class 2 wiring methods
WARRANTY • Standard 5-year warranty
1 - + 21 - + 2
1.03” (26.15mm)
https://www.douglaslightingcontrols.com/https://unvlt.com/
-
Devices are positioned in luminaires and wired directly to LED drivers for power and control commands (see our Design-in Guide for installation information).
To order, or for more information, contact your local OEM Regional Sales Manager.
These components are available for sale to all luminaire manufacturers and are available as option codes on select luminaires and retrofit kits.
*For OFF control Dim-to-OFF drivers must be used,otherwise the luminaire will dim to it’s minimum level.
1 - + 2
To LED Modules
BT-IFS-A, or BT-IFC-A
Neutral
Line
Earth
1-ChannelLED Driver
With AuxiliaryPower Output
(-) LED
(+) LED
(-) AUX
(+) AUX
(-) DIM
(+) DIM
NL
LN
GND
1 - + 2
To CH-2LED Modules
To CH-1LED Modules
BT-IFS-A,or BT-IFC-A
Neutral
Line
Earth
TunableWhite
2-ChannelLED Driver
With AuxiliaryPower Output
(-) LED-2
(+) LED-2
(-) LED-1
(+) LED-1
(-) CCT
(+) CCT
(-) AUX
(+) AUX
(-) DIM
(+) DIM
NL
LN
GND
Retention Ring
Housing
Push-in Terminals
Push-in Terminals
Retention Ring
LED Indicator & Reset Button
Bezel
Fits Standard1/2 inch
Knockout
Occupancy andDaylight Sensor
Wiring
DOUGLAS LIGHTING CONTROLStoll free: 877-873-2797direct: 604-873-2797lighting@douglaslightingcontrols.comwww.douglaslightingcontrols.com
UNIVERSAL LIGHTING TECHNOLOGIES, INC. toll free: 1-800-225-5278direct: [email protected]