intel/dialogic sr5.1.1 for windows & sr 5.1 for linux ... · icg will eval. if the config is...
TRANSCRIPT
Intel/Dialogic SR5.1.1 for Windows & SR 5.1 for Linux
Product Update
Leo LeeIntel/Dialogic VAD - ICG Taiwan 30th April 2002
Agenda
• SR 5.1 Linux• SR 5.1.1 Windows• DM3 series board• HDSI• CT ADE 8.2• Promotion in Q2
Dialogic SR 5.1 Linux
• Released on Feb 1, 2002• Available for Download
– http://support.dialogic.com– Burn a CD from TSD
• Best Linux Offering on the Market– Industry leading robust media-processing
platform in terms of density,scalability,and breadth of product support
Full Featured
• First full-featured Linux system release supporting all features of SR 5.1.1 for Windows (Except : High impedance interface for call logging , DM/V480-2T1-PCI-Hiz , DM/V600-2E1-PCI-Hiz )– ISDN PRI, robbed bit T1 , or R2MF E1– TrueSpeech voice coding on PCI boards.– GSM and G.726 on PCI , cPCI– Full density continuous speech processing(CSP)– GlobalCall API for IP and PSTN call Control
Additional Telco-Enabling Features
• A solid step on the path towards Telco grade system.
• New High-Availability Features– cPCI peripheral hot-swap (like-to-like replacement) – Interactive diagnostics for DM3 technology (POST
on-demand)– Firmware tracing– Faster system initialization time (75s for 10
boards . Down from 307s in SR5.1.1 for Windows)
Additional Telco-Enabling Features (Cont.)
• Over 1300% improvement in Latency (for record) ; Over 300% improvement in CPU Loading.
• High Density – Up to 120 ports/board , 1200 ports/system
• Selective Startup– Customer can stop and start individual group of
board without bring down the system
Riding the Linux Wave
• The fastest growing OS– Total Market Growth in 2001:57%(IDC)– 17% of all servers run Linux (IDC)
• SR 5.1 for Linux- The most comprehensive Linux offering avalable today.
• End of Unix Supporting is nearing– Maintenance support for both UnixWare and
Solaris will end in May , 2002
Extensive Field Testing
• Five months of testing/validation by 11 customers in various applications:– West Teleservicell processing for prepaid calling
card.Completed their application and already deploying.
– Jinny SW-Voice XML browser– Lyrix-Enterprise voice portal– Pracom-Speech activated dialer , UM, audio
conferencing.– Teligent-UM, prepaid cards , VPN, virtual call
center .
CSP & SoftFax Support
• The following table is extract from SR 5.1 for Linux Release note.
D/41JCT-LS LS-4 4 0LS-4 0 4
D/42JCT-U PBX-4 0 2PBX-4 2 0
D/82JCT-U PBX-8 8 0
Boards Network Interface CSP SoftFaxVFX/41JCT-LS LS-4 4 4
PBX-8 0 2D/120JCT-LS LS-12 12 0
LS-12 0 4D/240JCT-T1 ISDN-24 0 0
CAS-24 0 4CAS-24 24 0
D/300JCT-E1 ISDN-30 0 0CAS-30 0 0CAS-30 0 4
D/480JCT2T1 ISDN-48 0 0CAS-48 48 0
D/480JCT1T1 ISDN-24 0 4CAS-24 24 0
D/600JCT-2E1 ISDN-60 0 0CAS-60 0 8
D/600JCT-1E1 ISDN-30 0 4CAS-60 30 0
SR5.1.1 for Windows
• Full-featured Windows System Release with dramatic performance improvement supporting all features and boards of SR5.1 for Windows plus…– Introduces the DM3 IPLink board with a 100BaseT Ethernet
interface– DM3 VFN board with integrated T-1 or E-1 interfaces– CSP on D/41JCT ,VFX/41JCT,D/42JCT-U and D/82JCT-U – and bug fixes.
SR5.1.1 for Windows (Cont.)
• Significant performance Improvements– CPU utilization now 15% for 10 board solution– Record latency now < 400 ms– Increased System Density
• 16-board PCI system for 1920 channels
• This is the last release that will support ISA-based boards
DM3 series boards
Higher density "A"-series Multifunction boards
• DM/V960A-4T1, DM/V1200A-4E1, DM/V480A-2T1, DM/V600A-2E1 that support up to 120 ports and up to 1200 ports in a system.
• Features include: – Full density Continuous Speech Processing (CSP), with
T1 robbed-bit, T1 & E1 ISDN PRI, T1 & E1 CAS and E1 R2MF
– TrueSpeech voice coding on PCI boards; GSM and G.726 on PCI and cPCI
– 60 channels of conferencing on DM/V480A-2T1 and DM/V600A-2E1 boards (with CSP, TrueSpeech and ISDN)
DM3 QuadSpan Resource Only Boards
• DM/V2400A-PCI : Up to 240 voice media and tone channels with no network interface, SCbus and CT Bus compatible; PCI form factor.
• DM/V2400A-cPCI : Up to 240 voice media and tone channels with no network interface: CT Bus compatible; cPCI form factor.
VFN(voice & fax) DM3-based boards
• DM/VF240-1T1-PCI ; DM/VF300-1E1-PCI• Offering voice fax and network interface• R4 API support including GlobalCall and VFX Fax• Up to 8 cards per chassis –192(T1) or 240 (E1)
channels• Color Fax capable with 14.4 bps , ECM , MMR on all
channels• Unique 1:1:1:1 ratio of voice/fax/network/tone
resources.
DM/N160TEc (DTI/16)
• Think of board as functionally equivalent to a DTI/240SC X 16 ( or DTI/300SC X 16 )
• Support up to 384 T1 or 480 E1 ports over 16 T1 or E1 trunks
• Same board can be downloaded to support T1 or E1 – programmable
• Compact PCI only / H.110 CT bus
DM/N160TEc (Cont.)
• One protocol per board• A-law / u-law conversion• NFAS• Clear channel support• Hot-swap• SR 6.0 Linux & Windows in Q3 2002
Develop computer telephony solutions with DM3 products
Requires:– A minimum of an Intel-based 200 MHz
PC – At least 128 MB RAM for a system that
contains two or fewer boards – 512 MB RAM for a system that contains
three or more DM3 boards
DM3 Features List
• DM3 MediaSpan – Appendix A• DM3 Product Configuration Table –
Appendix B
HDSI, DI/SI Boards
HDSI Series
• HDSI High Density Station Interface– Support WinNT SR5.1.1 & Linux SR5.1– Support Up to 120 Analog Channels– Compatible with R4 API– Available with PCI / cPCI form factor– 48, 72, 96, 120 Station Ports
HDSI Features• Analog Loop Start Line Interface
– 24 V talk battery– Up to 8 HDSI/1200 per chassis– 2000 feet loop length
• DTMF detection• Tone generation for dialtone , busy ,etc.• FSK generation for callerID service• Ringing to all stations
– 20,25,50 Hz– 55 V RMS
• Traditional R4 MSI API• Rack Mountable• Architecture – Appendix C
HDSI/1200 (SIB)
Accessory
• SIB– Station Interface Box for each 24 Channel– SA-240 for each 24 Channel
DISI (Dialogic Integrated Station Interface ) with Voice Resources
• DI/SI32• DM3-based, single slot, PCI Form Factor, SCbus and CT Bus
compatible• Up to 32 analog station interfaces with ring capability, plus an
audio port. • Includes call processing, voice and conferencing. • 32 Voice Resource 32 Analog Interface
• DI/0408LSA• DM3-based, single slot, PCI Form Factor, SCbus and CT Bus
compatible• 12 voice Resource , 4 analog loop start interfaces, 8 analog
station interfaces with ring capability, plus an audio input port. • Includes call processing, voice, conferencing and fax.
CT ADE 8.2Just Release!1 March 2002
CT ADE 8.2
• Released on March 1, 2002• Available for download at
– http://www.dialogic.com/products/parity/developers/downloads/eval.htm
– Burn CD from TSD
• Intel® will release the CDs in late March
New Features
• New Sentinel– USB Sentinel– Stacking Sentinel for Different Combination
of configuration• I.e. 2 Port RT + 6 Port RT = 8 Port RT
New Features
• Add support of new board– DI/0408-LS-A– DI/SI32
• New API Support– Call Logging API through Topaz– SAPI 5.0 TTS & ASR
Feature Cut
• VOS C++ Dev Kit is included on CD• TAPI Devices are not support by Topaz
Intel Policy
• Intel no longer provide swap key– Adding Port, they can stacking sentinel.– Splitting Ports – No splitting is allow. ICG
will eval. If the config is acceptable for resell.
Accessory
• DI/SI32– MSI Global Power Modules– DI/SI Breakout Box
• DI/0408LS-A– MSI Global Power Modules– DI/0408 Breakout Box