Integrotech, a Polish engineering company has been on the market since 2001. Integrotech specializes

in energy media measurements and industry automation.

As a manufacturer of devices and the Polish partner of FMC Technologies, FMC LTD, Flow Meter Group,

Tecnomatic SpA and Siemens we offer complex services in the area of metering system design,

manufacture, implementation and diagnostics for the gas industry and other industry sectors.

OUR RANGE OF PRODUCTS AND SERVICES INCLUDES:

DESIGN, ENGINEERING, MANUFACTURE

AND MAINTENANCE SERVICES

• Design, manufacture, assembly and maintenance of metering systems,

• Turnkey projects - regulation and metering gas station,

• Customer-tailored prototype devices for production monitoring and Quality Control systems,

• Service and maintenance support provided from our plant in Łódź or through our local partners,

• Meter Runs according to PED 27/93/EU - DN up 48”, ANSI up to 2500, L≤ 20m

EQUIPMENT AND DEVICES

Our commercial offer includes two main product groups:

OIL AND GAS

Equipment, devices and engineering materials connected with extraction, transfer, transport and measurement

of gaseous and liquid energy media, designed for gas industry and oil and gas mining industry.

Our offer is composed of our own

solutions as well as products of our

partners and of other proven suppliers.

INDUSTRIAL PROCESSES AND AUTOMATIC CONTROL SYSTEMS

Industrial equipment, devices and engineering materials for instrumentation and Control Systems and processing

plants for liquid and gaseous media.

The consistent efforts for developing our commercial offer and increasing our production capabilities resulted

in establishing a close cooperation with, among others, the Technology Accelerator of the University of Łódź,

Lodz University of Technology, and the National Instruments Company, and also in winning many awards and medals

for our products at international and domestic fairs and competitions.

Our Quality Management System is ISO certified according to PN-EN ISO 9001:2009 standard; we also have UDT (Office of Technical Inspection) and GIG (Central Mining

Institute) certificates. We are authorised to attach the CE mark to our intrinsically safe

products according to the 94/9/EC ATEX Directive and pressure equipment according

to the Directive 97/23/EC - PED.

OIL AND GAS – MEASUREMENTS AND I&C SYSTEMS

FLOW COMPUTERS

The gas flow computer type MSP-02-FC is a microprocessor-controlled measuring device designed for operation in process and settlement measuring systems for compressive media. The flow computer was designed to simultaneously meet the requirements of GUM (Central Office of Measures) and ATEX as well as the PGNiG factory standard No. ZN-G-4007, European standard PN-EN 12405, and SGT – special requirements for flow computers used for international settlements connected with gas transfer through the Yamal-EU transit pipeline.

INSTALLATION VERSIONS:

• 19U2 – for installation in a 19” RACK system

• Multi – Wall-mounting compatible with MacMATIIA flow computers

• DIN – DIN rail mounting

The flow computer can operate with turbine, rotary, orifice, ultrasonic, mass and Annubar gas flowmeter, as well as with process chromatograph, odorizing station, AccuLERT system or MSP-SEP separators.

MSP-SEP SEPARATOR

Intelligent analogue and pulse separators MSP-SEP are designed for separation of measuring and control signals. The Ex version of MSP-SEP separators may receive signals from explosion hazard zones (hazard group II C). These configurable microprocessor-controlled devices are highly precise comparable with the MSP-02-FC flow computers, and are able to communicate with transmission systems through the RS485 ports. As a very unique solution, both MODBUS and GAZMODEM 1 and 2 protocols may be used for monitoring. Separators can be configured from the level of a dedicated MONITOR software installed on a computer.

MSP-SEP separators meet the requirements of standards:

PN-EN 60079-0:2009

PN-EN 60079-11:2007

PN-EN 60529:2002

Separators are designed for operation in industrial ICA systems and as extension modules for the MSP-02-FC flow computers. Available in Ex and nEx versions.

ANALOGUE SEPARATOR: Ex version: 2 analogue inputs/ 2 analogue outputs nEx version: 2 analogue inputs/ 2 analogue outputs

PULSE SEPARATOR: Ex version: 4 pulse-state inputs/ 4 pulse-state outputs nEx version: 4 pulse-state inputs, 2 state inputs/ 6 pulse-state outputs

COMMUNICATION: RS485: 2 independent channels; protocols: Modbus, GazModem 1 and 2.

MSP-nCOM MODULE

The MSP-nCOM device is the expansion module which adds serial ports with dedicated functionality to MSP-type flow computer. The module can be used in all applications where four basic communication ports of the flow computer are not enough.

The basic application range of the MSP-nCOM module includes communication of MSP flow computers with:

• Ultrasonic gas flow meters,

• Mass flow meters with digital communication lines,

• Chromatographs,

• Controllers (in Master and Slave modes),

• Superior systems (SCADA),

• Peripheral devices.

The single type MSP-02-FC flow computer may have as many as four MSP-nCOM modules connected to it; this way it is possible to obtain a flow computer equipped with four standard and four dedicated communication ports.

MSP-MK MODULE

The MSP-MK module is the advanced telemetric solution which extend the functionalities of MSP family devices by the following communication options: configurable serial ports (RS232/422/485); LAN; GSM; and fibre optic link (in SC or ST standard).

The MSP-MK device is available in three variants: MSP-MK1.0, MSP-MK1.1 and MSP-MK1.2.

The particular versions differ in local communication options, since the number and type of these options depend on the hardware modules used for configuration of the device.

MSP-MK1.0 - metrological and communication module equipped with:

• GSM Modem,

• Serial ports,

• 1x RS-485,

• 3x RS-(232/422/485) mode selected

from the locally configurator or remotely via a GazModem protocol,

• Ethernet,

• 1x Fast Ethernet

• State input:

• 6x state-voltage,

• 2x configurable: Analog 4-20 mA

• Output:

• 1 x contact

• 1x internal communications bus connector for connecting hardware extensions: MSP-MK1.1 or MSP-MK1.2.

MSP-MK1.1 - 4x hub Fast Ethernet.

MSP-MK1.2 - 3x hub Fast Ethernet with fiber optic port.

MSP-MK1.0 offers signal conversion from GPRS and Ethernet to RS-232/422/485 with multiple access - the same communication port can be read simultaneously and independently from the two networks (GPRS and LAN).

The unit is supplied with a program for monitoring and configuration for installation on a PC with Windows XP or higher.

Despite its small dimensions and low power consumption, the MSP-MK module combines the

features of five separate devices:

• Ethernet switch with fibre-optic input,

• GPRS modem,

• Serial ports server,

• Six-port module of telemetric inputs,

• Remotely controlled low power switch.

During operation of measuring systems the need arises quite often to evaluate the metrological conditions of equipment. For the purpose of such evaluation we offer the following technical solutions:

Acculert - the diagnostic and monitoring system for turbine gas flow meters, with technical solution based on intelligent signal separator type HF allowing for continuous monitoring of metering system behavior and monitoring of operational condition of the gas meter. FlowView - scalable software tool designed for monitoring of metering systems of various complexity levels, able to operate with MSP-02-FC flow computers.

MONITORING OF MEASURING SYSTEMS

MSP-PPC – LEVEL MEASUREMENT AND CONTROL SYSTEMS FOR LIQUIDS

LEVPoint –AHs (HART) and Leverian are microprocessor-controlled devices for liquide level measurement and control for hazardous and nonhazardous areas. Due to its modular design, the device can be optimally matched to the needs of every individual existing or new application.

The device can be integrated with the new one or already installed in the plant magnetic strip. Since such integration does not require any intervention in the structure of existing level indicator, there is no need to report it to The Office of Technical Inspection.

The LEVERIAN system add the following additional functions to liquid level indicators:

• Remote reading (ModBus; GazModem 1 and 2)

• Level visualisation on a computer

• Programming of four alarm thresholds

• Control of two drain valves.

MSP-LEVPoint-AHs Modular Liquid Level Sensor is a device equipped with 4..20mA output. Since HART

protocol is implemented, there is posibility of digital readout of the current level and the configuration of the device

with the supplied software. The device is powered by the measuring current loop (does not require an additional power

supply).

The basic applications of LEVPoint –AHs Modular Liquid Level Sensor and Leverian Measurement and Control Liquid

Level System are filter-separators, odorising station and other liquid containers equipped with a magnetic liquid level

indicator.

INDUSTRY – INSTRUMENTATION AND CONTROL SYSTEMS

We also carry out such tasks which require very individual approach, where typical

commercial solutions would not satisfy the customer. Owing to professional

experience of our employees and associates, good contacts with the academic

society and the access to our partners’ know-how, we are able to solve problems

of mechanical, IT and electronic nature in the broadly understood area of industrial

measurements and automation.

• Flow measurement systems

• Test and examination stations for production purposes

• Specialized assembly systems and design solutions for mobile navigation data gathering vehicles

• Special systems – according to customer’s requirements.

REFERENCES

Our company is active both in Poland and abroad (projects implemented in Romania, Uzbekistan or United Arab

Emirates). We facilitate all of our knowledge and potential while working for such demanding customers as EUROPOL

GAZ Transit Gas Pipeline System, ABB, Polish Oil and Gas Company (PGNiG), Gas Transmission Operator

GAZ-SYSTEM S.A., Control Process S.A., ATREM S.A., DeLaval Operations, Air Liquide, REPCo S.p.A. and

TOMTOM.

Integrotech sp. z o. o. Plac Zwyciestwa 2 bud. D | 90-312 Lodz, Poland

phone number: +48 42 674 55 53 | fax: +48 42 674 55 85

www.integrotech.com| office@integrotech.com.pl