integration case study - coolautomation.com · 2019-09-19 · integration case study: pillows anna...

Integration Case Study: Pillows Anna Van Den Vondel Hotel, Amsterdam ABOUT THE CUSTOMER PILLOWS Hotels are located in monumental properties and blend elegant design with a residential feel and personal service. PILLOWS ANNA VAN DEN VONDEL is a 4 star hotel in Amsterdam, ranked 5 of 5 by visitors and is ranked #7 out of 387 hotels in the city by TripAdvisor. “Cute boutique hotel that really shows why the little things really matter” - Hotel visitor feedback THE SOLUTION Using a single universal bridge, that is native to Mitsubishi HVAC and to Philips Dynalite Dynet protocols. This solution allows to avoid third party integration platform such as BACnet that is foreign to both systems, that usually leads to many communication challenges, on top of providing robust and convenient integration the solution The INTERGATOR Tovèrli Lighting & Control Solutions is a specialist in delivering state-of-the-art controls for comfort, well-being and safety installations. The company is focusing its activity on Hospitality, Office & Industry, Home-Automation and Superyachts projects. Reducing Failure Points Cost Effective Reduced Installation & Configuration Time Robust integration CUSTOMER CHALLENGE Implementing the following project objective list with a simple, robust solution that would always work. Integration with Mitsubishi HVAC system User control functionality: Use Antumbra temperature sensor as reference for the HVAC system (“Feed temperature”) Achieving acceptable latency/response time between both systems (Phillips Dynalite and Mitsubishi) - Air Conditioning On/Off - Temperature Setpoint control - Fan speed control SYSTEM COMPONENTS Outdoor Unit R2 Pury-P400 YLM-A(S) City Multi - wall unit PKFY-P15/P20/P25 VBM-E(S) City Multi - channel unit PEFY-P32/P40 VMA-E(S) Multi-City VRF HVAC CoolMasterNet PDEG PDEG (IP translation gateway) Dynet Trunk PDEG (Text over IP interface) DDRC-GRMS10 Hotel room controller DDRC-GRMS10 Multupurpose controller + Dimmer PADPE-WW PADPE Autumbra Display EU PADPE-WW PADPE Autumbra & Cust. Engraving 2X 6X 31X 1X 31X 31X 31X 62X 5X - User feedback functionality: on/off. - Set point, alarm code (when occurs)

Upload: others

Post on 22-May-2020

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Integration Case Study - CoolAutomation.com · 2019-09-19 · Integration Case Study: Pillows Anna Van Den Vondel Hotel, Amsterdam ABOUT THE CUSTOMER PILLOWS Hotels are located in

Integration Case Study:

Pillows Anna Van Den Vondel Hotel, Amsterdam

ABOUT THE CUSTOMER

PILLOWS Hotels are located in monumental properties and

blend elegant design with a residential feel and personal

service.

PILLOWS ANNA VAN DEN VONDEL is a 4 star hotel in

Amsterdam, ranked 5 of 5 by visitors and is ranked #7 out of

387 hotels in the city by TripAdvisor.

“Cute boutique hotel that really

shows why the little things

really matter”

- Hotel visitor feedback

THE SOLUTION

Using a single universal bridge, that

is native to Mitsubishi HVAC and to

Philips Dynalite Dynet protocols.

This solution allows to avoid third

party integration platform such

as BACnet that is foreign to both

systems, that usually leads to many

communication challenges,

on top of providing robust and

convenient integration the solution

The INTERGATOR

Tovèrli Lighting & Control Solutions is a specialist in

delivering state-of-the-art controls for comfort, well-being

and safety installations. The company is focusing its activity

on Hospitality, Office & Industry, Home-Automation and

Superyachts projects.

Reducing Failure Points

Cost Ef fective

Reduced Instal lation & Configuration Time

Robust integration

CUSTOMER CHALLENGE

Implementing the following project objective list with a

simple, robust solution that would always work.

Integration with Mitsubishi HVAC system

User control functionality:

Use Antumbra temperature sensor as reference for the

HVAC system (“Feed temperature”)

Achieving acceptable latency/response time between

both systems (Phillips Dynalite and Mitsubishi)

- Air Conditioning On/Off

- Temperature Setpoint control

- Fan speed control

SYSTEM COMPONENTS

Outdoor Unit R2Pury-P400 YLM-A(S)

City Multi - wall unitPKFY-P15/P20/P25 VBM-E(S)

City Multi - channel unitPEFY-P32/P40 VMA-E(S)

Multi-City VRF HVAC CoolMasterNet PDEG

PDEG (IP translation gateway)

Dynet Trunk

PDEG (Text over IP interface)

DDRC-GRMS10Hotel room controller

DDRC-GRMS10Multupurpose controller + Dimmer

PADPE-WWPADPE Autumbra Display EU

PADPE-WWPADPE Autumbra & Cust. Engraving

2X 6X

31X 1X

31X

31X

31X

62X

5X

- User feedback functionality: on/off.

- Set point, alarm code (when occurs)