intakes gas separators

Copyright Wood Group ESP, Inc. - March, 2001

INTAKES BOLT ON INTAKES

Length Weight DESCRIPTION Ft. M. Lbs. Kgs.

PART NO. 300 SERIES

INTAKE, BOLT-ON PUMP TR3 STL 0.80 0.24 28 12.7 1021443 INTAKE, BOLT-ON PUMP TR3 SS 0.80 0.24 28 12.7 113143 INTAKE, BOLT-ON PUMP TR3 AR STL 0.80 0.24 28 12.7 113429 INTAKE, BOLT-ON PUMP TR3 AR SS 0.80 0.24 28 12.7 113430

400 SERIES INTAKE, BOLT-ON PUMP TR4 STL 1.0 0.30 28 12.7 935858 INTAKE, BOLT-ON PUMP TR4 SS 1.0 0.30 28 12.7 1006071 INTAKE, BOLT-ON PUMP TR4 AR STL 1.0 0.30 28 12.7 140796 INTAKE, BOLT-ON PUMP TR4 AR SS 1.0 0.30 28 12.7 140800

500 SERIES INTAKE, BOLT-ON PUMP TR5 STL 1.2 0.37 50 22.7 138028 INTAKE, BOLT-ON PUMP TR5 SS 1.2 0.37 50 22.7 138029 INTAKE, BOLT-ON PUMP TR5 AR STL 1.2 0.37 50 22.7 138032 INTAKE, BOLT-ON PUMP TR5 AR SS 1.2 0.37 50 22.7 138033 INTAKE, BOLT-ON PUMP TR562 STL 1.2 0.37 50 22.7 123206 INTAKE, BOLT-ON PUMP TR562 AR STL 1.2 0.37 50 22.7 123585

600 SERIES INTAKE, BOLT-ON PUMP TR675 STL SHORT 0.73 0.22 56 25.4 957498 INTAKE, BOLT-ON PUMP TR675 SS SHORT 0.73 0.22 56 25.4 117409 INTAKE, BOLT-ON PUMP TR675 AR STL SHORT 0.73 0.22 56 25.4 117791 INTAKE, BOLT-ON PUMP TR675 AR SS SHORT 0.73 0.22 56 25.4 117819

800 SERIES INTAKE, BOLT-ON PUMP TM STL SHORT 0.87 0.27 80 36.2 977710 INTAKE, BOLT-ON PUMP TM SS SHORT 0.87 0.27 80 36.2 117961

900 SERIES INTAKE, BOLT-ON PUMP TR9 0.73 0.22 56 25.4 1033612

For design requirements not listed consult your Wood Group ESP representative.


GAS SEPARATORS Wood Group ESP offers a variety of gas separator models for different well conditions. These models are offered in all three series. It is important to mention here the features of these models. STANDARD (STD): These separators are intended for use in non-abrasive well conditions. Solid tungsten carbide bushing/sleeves are used in these units. Internal compression tubes are coated with a highly abrasive resistant coating. STAINLESS STEEL (SS): In a SS construction, SS is used to make the following components. All other components are the same as the standard unit.

Head Lock ring/Compression nut FERRITIC Housing (9 Chrome 1 Moly)

WAG UNITS: WAG units are designed for highly corrosive CO2 environments. These units essentially have SST construction with the following features added

SST Housing (304 SST) Lock plates are not used on these units. Housing joints are locked with a thread sealant Flame spray coating is used on the housing

SUPER RESISTANT GAS SEPARATORS All the internal components on this design are coated with abrasive resistant coating. SRGS features can be added to any model gas separator. 3 BEARING GAS SEPARATORS As the name implies, additional bearings are provided on the shaft assembly. Designs features are introduced that enhance the performance of these units in abrasive/corrosive wells. 3 bearing separators have SST construction and can be built as SRGS. XGC MODELS: XGC models are designed for applications having excessive gas. Any of the above mentioned models can be offered in XGC separators.


GAS SEPARATORS STANDARD ROTARY GAS SEPARATORS 300 SERIES

Length Weight DESCRIPTION Ft. M. Lbs. Kgs. PART

NUMBER GAS SEPARATOR, ROTARY TR3 STL 3.8 1.16 51 23.1 999003 GAS SEPARATOR, ROTARY TR3 RS 3.8 1.16 51 23.1 113091 GAS SEPARATOR, ROTARY TR387 SS 3.3 1.01 65 29.5 116085 GAS SEPARATOR, ROTARY TR387 STL 3.3 1.01 65 29.5 116084 GAS SEPARATOR, ROTARY TR387 RS 3.3 1.01 65 29.5 116119

ENGINEERING DATA 300 SERIES

60Hz OPERATION 50Hz OPERATION HOUSING DIAMETER 3.38” HOUSING DIAMETER 85.85 MM SHAFT DIAMETER 0.687” SHAFT DIAMETER 17.4 MM SHAFT LIMIT STANDARD 125 HP SHAFT LIMIT STANDARD 104 HP

HIGH STRENGTH 200 HP HIGH STRENGTH 167 HP 400 SERIES


NUMBER GAS SEPARATOR, ROTARY TR4 UT W/HSS 4.3 1.31 120 54.4 115828 GAS SEPARATOR, ROTARY TR4 UT SS 4.3 1.31 120 54.4 127893 GAS SEPARATOR, ROTARY TR4 UT AR 4.3 1.31 120 54.4 150317 GAS SEPARATOR, ROTARY TR4 LT W/HSS 3.3 1.01 65 29.5 115827 GAS SEPARATOR, ROTARY TR4 LT W/HSS SS 3.3 1.01 65 29.5 140106 GAS SEPARATOR, ROTARY TR4 LT SS 3.3 1.01 65 29.5 127892 GAS SEPARATOR, ROTARY TR4 LT AR 3.3 1.01 65 29.5 150315 GAS SEPARATOR, ROTARY TR4 LT 3TC 3.3 1.01 65 29.5 141464 GAS SEPARATOR, ROTARY TR4 LT SR 3.3 1.01 65 29.5 150428 GAS SEPARATOR, ROTARY TR4 LT SR 3B SS 3.3 1.01 65 29.5 150425 GAS SEPARATOR, ROTARY TR4 LT 3TC SST W/HSS 3.3 1.01 65 29.5 150465 GAS SEPARATOR, ROTARY TR4 LT AR SST WAG 3.3 1.01 65 29.5 140822



HIGH STRENGTH 410 HP HIGH STRENGTH 342 HP For design requirements not listed consult your Wood Group ESP representative.


GAS SEPARATORS STANDARD ROTARY GAS SEPARATORS

500 SERIES Length Weight DESCRIPTION Ft. M. Lbs. Kgs.

PART NUMBER

GAS SEPARATOR, ROTARY TR5 UT W/HSS 3.8 1.14 154 69.9 145325 GAS SEPARATOR, ROTARY TR5 UT SS 3.8 1.14 154 69.9 127891 GAS SEPARATOR, ROTARY TR5 UT 3.8 1.14 154 69.9 111144 GAS SEPARATOR, ROTARY TR5 LT 3.1 0.95 148 67.1 1018704 GAS SEPARATOR, ROTARY TR5 LT SS 3.1 0.95 148 67.1 127890 GAS SEPARATOR, ROTARY TR5 LT W/HSS 3.1 0.95 148 67.1 145323 GAS SEPARATOR, ROTARY TR5 LT 3TC SS 3.1 0.95 148 67.1 141254 GAS SEPARATOR, ROTARY TR5 LT 3TC STL 3.1 0.95 148 67.1 141463



HIGH STRENGTH 1019 HP HIGH STRENGTH 849 HP XGC GAS SEPARATORS

400 SERIES Length Weight DESCRIPTION Ft. M. Lbs. Kgs.

PART NUMBER

GAS SEPARATOR, ROTARY TR4-XGC AR STL 3.5 1.1 94 24.5 140904 GAS SEPARATOR, ROTARY TR4-XGC AR SS 3.5 1.1 94 25.4 150136 GAS SEPARATOR, ROTARY TR4-XGC AR STL W/LT 6.1 1.9 164 74.4 150319 GAS SEPARATOR, ROTARY TR4-XGC AR SS W/LT 6.1 1.9 164 74.4 150399

500 SERIES


NUMBER GAS SEPARATOR, ROTARY TR5-XGC AR STL 4.6 1.4 207 93.9 140226 GAS SEPARATOR, ROTARY TR5-XGC AR STL HSS 4.6 1.4 207 93.9 145322 GAS SEPARATOR, ROTARY TR5-XGC AR SS 4.6 1.4 207 93.9 141459 GAS SEPARATOR, ROTARY TR5-XGC AR STL W/LT 8.4 2.6 355 161.0 145396 GAS SEPARATOR, ROTARY TR5-XGC AR STL W/LT HSS 8.4 2.6 355 161.0 145320 GAS SEPARATOR, ROTARY TR5-XGC AR SS W/LT 8.4 2.6 355 161.0 141458

For design requirements not listed consult your Wood Group ESP representative.

intakes gas separators

Documents