insulation requirements for a60 / h120 rated firetex
TRANSCRIPT
www.mclunitex.com
Insulation Requirements for A60 / H120Rated Firetex Module Seal Systems
A60 and H120 Lloyds Register of Shipping, Certificate No. SAS F170024. Blast over-pressure to1.1 bar g, Lloyds Register of Shipping Certificate No. LWT 401087/1.
Insulation in accordance with Lloyds Register of Shipping, Certificate No. SAS F170024.
MCL’s engineering staff should be consulted for advice.
Each seal is supplied with fitting instructions. Fixing methods may vary to suit client requirements.
Seals to be fitted on the hazard side.
Certification:
Insulation:
Movement:
Installation:
Location:
Specification
Rev 0 01/02/2018
2
1
3
PROVIDED BY MCL UNITEX LTD.
CAN BE PROVIDED ON SPECIAL REQUEST.
PROVIDED BY OTHERS.
FIXINGS &BACKING FLATS
FIRETEX MODULE SEAL
STEEL MODULE
STEEL MODULE
BLAST & FIREDIRECTION
1
2
3
3
3
3
ALL INSULATION TO BE128kg/m3 DENSITY
H120 CLASSINSULATION
H120 CLASSINSULATION
MSS-0100Product Data Sheet