insulated swing doors - multi-hardware€¦ · for a period of one year from date of certificate of...

___ INSULATED SWING DOORS

TECHNICAL DATA

DESCRIPTION: INSULATED DOOR SERIES:

FINISH:

ASSEMBLY:

ALL 1-3/4" (44.5mm) DOORS CAN BE INSULATED WITH AN ADDITIONAL INTERIOR ALUMINUM SKIN, SEPARATED BY A THERMAL BARRIER RESULTING IN A 2" (50.8mm) OVERALL THICKNESS.

260 SERIES INSULATED NARROW STILE DOOR: BASED ON 175 SERIES DOOR. REFER TO 260 SERIES DETAIL DRAWING. DESIGN: THICKNESS : 2" (50.8mm)

STILES : 2" (50.8mm) TOP RAIL : 2-1/4" (57.2mm) BOTTOM RAIL : 3-7/8" (98.4mm)

360 SERIES INSULATED MEDIUM STILE DOOR: BASED ON 350 SERIES DOOR . REFER TO 360 SERIES DETAIL DRAWING. DESIGN: THICKNESS : 2" (50.8mm)

STILES : 3-1/2" (88.9mm) TOP RAIL : 3-7/8" (98.4mm) BOTTOM RAIL : 6" (152.4mm)

560 SERIES INSULATED WIDE STILE DOOR: BASED ON 500 SERIES DOOR. REFER TO 560 SERIES DETAIL DRAWING. DESIGN: THICKNESS : 2" (50.8mm)

STILES : 5" (127mm) TOP RAIL : 5" (127mm) BOTTOM RAIL: 6" (152.4mm)

SWING DOOR MATERIAL STOCKED IN #17 CLEAR AND #40 BRONZE ANODIZED. OTHER FINISHES ARE AVAILABLE UPON REQUEST.

WELDED CORNER BRACKET ASSEMBLY.

P01

https://multihardware.ca

INSULATED SWING DOORS

CONTINUED

GLAZING:

OPTIONS:

SERIES 260, 360, 560 INSULATED DOORS WILL ACCEPT

29/32" (23mm) SEALED UNIT GLASS ONLY.

OPTIONAL TOP AND BOTTOM RAILS UP TO 12" HIGH ARE AVAILABLE. A VARIETY OF HORIZONTAL AND VERTICAL INTERMEDIATE RAILS CAN BE APPLIED.

Multihardware Professionals Standard Door Configuration

Series Thickness Stile Top Rail Bottom Rail

260 2" insul 2" (50.8mm) 2-1/4" (57.2mm)

360 2" insul 3-1/2" (89mm) 3-7/8" (98.4mm)

560 2" insul 5" (127mm) 5" (127mm)

Order Information

Standard Door Opening Size:

Single Door 3' x 7' ( 914mm x 2134mm) Pair Door 6' x 7' (1828mm x 2134mm)

Door Swing: When you order doors use the following designation.

LH� �RHI

RHO LHO

Notes for Door Order: Custom hardware may require certain stile or rail size.

3-7/8" (98.4mm)

6" (152mm)

6" (152mm)

PAIR-IN

PAIR-OUT

For non-standard applications contact our customer service department before ordering.

Commdoor will provide glass sizes upon customer's request without guaranty, customers are responsible to double check the sizes.

P02


NARRO w s TILE IN s u LATED DOOR

D

0

1 , 2" [50.8mm] ,

1

October 07, 2015

Q:\S0260_360_560\S0261Pi.Cltalogue\S.260ELEVATIONP03.dwg,10/7/20153:S4:47PM

E E

C\I

I , 2" [50.8mm] , 1

0

1 13/16" (46.0mm]

1 15/16" [49.2mm]

□ I , 2" [50.8mm] ,

1

0

2 1/16" [52.4mm]

0 TYPICAL DETAILS

P03

SERIES 260 https://multihardware.ca

MED I UM STILE INSULATED DOOR

E

0

I I·

0

I . 2" 1so.smm1 •I

October 07,2015

Q:\S0260_360_560\S0361Pi.Cltalogue\S360ELEVATION.dwg,10/7/20153:53:17PM

® -0 l

I

®

3 1/2" [88.9mm) , I

0

3 5/16" [84.1 mm)

3 7/16" [87.3mm)

®

0

---® -0 I �

I

®

�

I. 3 1/2" [88.9mm)

· I0

3 9/16" [90.5mm)

TYPICAL DETAILS

P04


w IDE s TILE IN s u LATED DOOR .

Q) Q)

0� '-� ®

a>-1�

I

0 � ..____/ _ _____,I·

5" [127.0mm] · I

0 I· 5" [127.0mm]

413/16" [122.2mm] · I

i-l ,--_5_ 11 _16"_ (12_ 8.6_mm_] ---i, I i-1, ___ 5 _111_6" _(12 _8.6 _mm _] ---'• I

TYPICAL DETAILS

October 07, 2015

Q:\S0260_360_560\S0561Pi.Cltalogue\S560ELEVATION.dwg,10/7/20153:56:03PM

�

· I

POS


OPTIONAL

1 3/4" (44.5mm)

2" [50.7mm]

175-011

DOOR RAIL 2 1/4" (57.2 mm)

Scale 1 :2 February 22th, 2010

1 3/4" [44.5mm]

2" [50.8mm]

175-018DOOR RAIL

3 7/8" (98.4 mm)

1 3/4" [44.5mm]

2" [50.7mm]

175-020DOOR RAIL

5" (127.0 mm)

TYPICAL DETAILS

1 3/4" [44.5mm)

2" [50.7mm]

175-022DOOR RAIL

6" (152.4 mm)

RAILS FOR 1 3/4" INSULATED DOOR

P06

SERIES 260-360-560 https://multihardware.ca

OPTIONAL

2" [50.7mm]

175-024DOOR RAIL

8" (203.2 mm)


- t8 I� u='-. >< -

--------=

1 3/4" [44.5mm]

2" [50.7mm]

175-028DOOR RAIL

1 0" (254.0 mm) ( cut from 12")

TYPICAL DETAILS

- t8�� '-. �

= -

1 3/4" [44.5mm]

2" [50.7mm]

•

�

•

•

175-028DOOR RAIL

12" (304.8 mm)

RAILS FOR 1 3/4" INSULATED DOOR

P07


OPTIONAL

175-051MUNTINBAR

13/16" (20.4 mm)


175-052MID BAR

1 3/4" (44.5 mm)

TYPICAL DETAILS

175-055MID RAIL

4" (101.6 mm)

CENTRE RAIL FOR 1 3/4" INSULATED DOOR

P08

SERIES 260-360-560


OPTIONAL

175-018

DOOR RAIL

3 7/8" (98.4 mm)


175-063

ADAPTOR

175-020

DOOR RAIL 5" (127.0 mm)

TYPICAL DETAILS

175-063

ADAPTOR

175-022



P09


OPTIONAL

175-063

ADAPTOR

175-024



0

175-063

ADAPTOR

175-028

DOOR RAIL 1 0" (254.0 mm) ( cut from 12")

TYPICAL DETAILS

175-063

ADAPTOR

175-028DOOR RAIL

12" (304.8 mm)


P10


MULTIHARDWARE PROFESSIONALS DOOR SPECIFICATION

PART 1 - GENERAL

1.1 Work IncludedFurnish labour, materials and services for the complete fabrication of Series [specify] Door manufactured by Multihardware Professionals. Work to include all necessary hardware and accessories or preparation for same as required based on the purchase agreement.

1.2 Design1.2.1 Aluminum Door Types

Multihardware regular duty doors [specify]: Series 175 [2" (50.8mm)] narrow stile. Series 350 [3-1/2" (88.9mm)] medium stile. Series 500 [5" (127.0mm)] wide stile.

1.2.2 Aluminum Door RailsDoors accept rail sizes [specify]:2-1/4" (57.2mm), 3-7/8" ( 98.4mm), 4-1/8"(104.8mm), 5" (127.0mm), 6" (152.4mm), 8"(203.2mm), 10" (254.0mm) and 12"304.8mm).

1.2.3Door Centre Rails {Optional}Available centre rail sizes [specify]:Available stock: 1/4" (6mm), 13/16"(20.4mm), 1-3/4" (44.5mm) and 4"(101.6mm). Custom size [specify].

1.2.4Door Glass Stop [specify]Single glazed for 1/4" (5 or 6mm) or 3/8" (9or 10mm) glass.Sealed unit for 1" (25mm) units.

1.3 Quality AssuranceThe door supplied under this specification isbased upon Series (specify) manufactured byCommdoor Aluminum.

1.4 Shop DrawingsAll work of this section shall be executed instrict accordance with approved shopdrawings.

1.5 WarrantyThe work of this section shall be guaranteedagainst defects of materials and workmanshipfor a period of one year from date of certificateof substantial completion.

PART 2 - PRODUCTS

2.1 Material2.1.1 Aluminum Extrusion

All extruded aluminum sections to be6063-T6 alloy or equivalent.

2.1.2 Glazing MaterialAll extruded thermoplastic elastomersgasket.

2.1.3 FastenersFasteners shall be zinc plated.

2.2 Hardware2.2.1 Offset Pivot

1 set of top and bottom offset pivot withmatching finish. Intermediate offset pivotis optional, OR

2.2.2 Hinge1 pair standard Butt hinges with matchingfinish. Intermediate or heavy duty hingesare optional, OR

2.2.3 Continuous HingeDoors accept most continues hinges[specify]

2.2.4 Locking DevicesMS deadlock with [cylinder both sides] or[cylinder on exterior and thumb turn oninterior].

ORMS latch lock with cylinder on the exteriorand lever handle on interior.

ORPanic exit devices as specified.

2.2.5 Push and PullType “A”, type “P” and type “O” handlesOR custom handles [specify].

2.2.6 CloserSurface mounted or concealed [specify].

2.2.7 ThresholdExtruded aluminum mill finish ½" (12mm)high. Available in 4" (101.6mm) and 7"(177.8mm) [specify].

2.2.8 Bottom SweepSurface applied two part adjustable with


mohair brush.2.3 Fabrication

Fabrication will be carried out according to theapproved shop drawings. All joints will bewelded using manufactures provided assemblybrackets to maintain the product designperformance.

2.4 Finish2.4.1 Anodize

Anodic Oxide Treatments are to beprocessed in accordance with AAMAdesignations.M12C22A31 class II designation is for #17Clear anodized finish (0.0004).M12C22A41 class I designation is for #14Clear Anodized finish (0.0007) and colourfinishes such as #26 light bronze, #40bronze and #29 black.

2.4.2 PaintThermosetting Acrylic Enamel coating areto be applied in accordance with AAMA603.8. Specify colour and type from PPG.Standard charts.

2.4.3 Fluoropolymer paint CoatingBased on Kynar 500 Resins are to beapplied in accordance AAMA 605.2.Specify colour from Valspar current chart.

PART 3 - EXECUTION

3.1 ProtectionExposed aluminum surface shall be protectedfrom long term contamination of mortar,concrete, paint, mud, etc.Doors and door frames shall be protected fromimpact damage by wood sheathing and plasticwraps.

3.2 InstallationMultihardware Professionals products to be installed according to manufacturers instructions and in conjunction with approved shop drawings. The work shall be performed by qualified skilled personnel ensuring proper equipment provided in order to expedite the project in an efficient professional manner.

3.3 CleaningInterim and final cleaning shall be performed inaccordance with the general conditions listingmethods outlined in AAMA 609 & 610-02(2002).

insulated swing doors - multi-hardware€¦ · for a period of one year from date of certificate of...

Documents