USER MANUAL Please read these instructions carefully before using the product

FAT BREAKERTM

Micro Vibration Deep Neuromuscular Stimulation Massager with Heat

Sculpt Your Body from The Comfort Of your Own Home

FAT BREAKERTM

1 | P a g e

Fat Breaker Instruction Manual

Stubborn fat cells are high in alpha receptors, which prevents them from releasing their fat content regardless of sport and diet. The Fat Breaker works by assisting in dismantling subcutaneous fat using controlled heat. A micro current is delivered through the skin, heating fatty tissues to the point where fat cells begin to break down. The Fat Breaker heats up and gradually targets fat cells. The energy also helps to stimulate collagen by penetrating deep into the skin tissue.

Fat Breaker Instructions Congratulations on your purchase of the Fat Breaker! The Fat Breaker device is used to massage and help break up cellulite and fat deposits. Use the Fat Breaker device on dry skin to help soften body fat and increase circulation on the arms, legs, thighs, hip, waist, and belly with micro heating massage therapy. For best results, it is suggested to use the Fat Breaker device twice daily for a minimum of 20 minutes per session.

How to Use Step 1. Before use, remove the Fat Breaker device from the protective case and make sure the device is fully charged using the USB charging cable provided. Step 2. Press and hold the Start button for 2 to 3 seconds to turn on the device. The blue light indicates that the device is on. Step 3. If heat therapy is desired to promote local circulation, first turn on the device, then press the button marked “M.” The red light on the “M” button indicates the device is heating up. Note that to get complete heat will take 4 to 5 minutes. Preheat the Fat Breaker device for 4 to 5 minutes before beginning a heat therapy massage session.

Step 4. Note the color settings. The green setting promotes double absorption effect. The yellow setting promotes sub dermal stimulation and firming. The red light indicates heat compression therapy. The blue light indicates the device is turned on and provides a neutral soothing effect. Step 5. Place the device on the target area of skin and apply gentle pressure, slowly and steadily scraping the device from top to bottom across the entire area of the body. Repeat the scraping motion from top to bottom. The recommended duration of a session is 20 minutes. Step 6. Place the device on the target area and apply gentle pressure. Slowly and steadily begin to scrape the device across the entire length of the target area, creating a back and forth pattern until contact has been made with the entire area. Step 7. If the device gets uncomfortably hot, press the button marked “M” to turn off the heat function. Step 8. To turn off the Fat Breaker device, press and hold the start button for 2 to 3 seconds until the blue light disappears.

FAT BREAKERTM

2 | P a g e

Product Specs

• Product name: Fat Breaker Heating Massage Therapy

• Product Model CX19-11 • Rated Power 1.2W • Rated Voltage 5V • Battery Capacity 2000MAH • Charging Time 5 Hours • Massage Temperature 45C • Massage Mode Four Settings • Product Size 133 x 106 x 32 MM

BK 3457

FAT BREAKERTM

3 | P a g e

Warnings The micro current and heat therapy provided by the Fat Breaker is not suitable for all users. If you have a history of heart problems, have a pacemaker implant, are currently pregnant or plan to become pregnant, the use of the Fat Breaker device is not recommended. Do not use the Fat breaker on areas of the body other than those specified above. Consult with your physician before use. Remember to turn off the device after each use. PLEASE NOTE: THE FAT BREAKER IS NOT A WEIGHT LOSS DEVICE.

Reorder www.IGIA.com

Disclaimer Notices In the process of the preparation of this manual, we have sought to make the content correct and complete. However, there is no guarantee that there are no errors or omissions in the manual. We reserve the right to change specifications of the products mentioned in this manual at any time without prior declaration. No part of this manual shall be reproduced, transmitted, transcribed or stored in a searchable system or translated into any other languages without the written authorization of our company. The company is not responsible for the loss caused by non-standard or wrong operation. Company does not guarantee specific results for individuals who use Fat Breaker due to many factors that can influence health and weight loss. Individual and patient results may vary. No individual result should be considered typical or guaranteed. We make no warranties or guarantees that you will lose a specific amount of weight for a particular period of time. This product has not been evaluated by the FDA. Fat Breaker is not intended to diagnose, treat, cure, or prevent any disease, illness, or medical condition. This is not a weight loss system. Design, shape, style, model and color may vary.

Warranty Clauses 1. Damage caused by failure to follow the instructions, human factors, force majeure, etc. is not covered by

warranty. 2. Maintenance cost will be charged for product out of warranty. 3. You can register for your free warranty on www.IGIA.com.

CUSTOMER SERVICE Phone: 516-653-0666

Email: sales.igiany@gmail.com www.IGIA.com

FAT BREAKERTM

4 | P a g e