instruction manual 16gb voice activated ir watch … · product manual voice activated ir watch :...

Thank you for purchasing from SafetyBasement.com! We appreciate your business.We made this simple manual to help you enjoy your new product as quickly and easily as possible.Be sure to check the TECH SUPPORT tab on your product page at SafetyBasement.com for the latest available manual.

INSTRUCTION MANUAL16GB VOICE ACTIVATED IR Watch Camera,

1080PRevised: October 17th, 2013

PRODUCT MANUAL VOICE ACTIVATED IR Watch : SB-WR0186

www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524

PRODUCT REFERENCE

MODE button VOICE ACTIVATION/

CAMERA

Microphone

Time AdjustmentUSB Port

Camera

POWERON/OFF

IR Lights (4x)

Camera

VITAL INFORMATION:

Charging time: About 4 hours for a full charge. Charge overnight the first time you get it.BATTERY LIFE: About 90 minutes



BEFORE YOU START - CHARGING & TIMEYou will first need to connect your watch to your PC or Mac to charge and to set time. We highly recommend that you set the time stamp so that your recordings are accurately timed. You will need to download a file to set the timestamp for your recordings. Go to the same section, TECH SUPPORT tab, to get the time file. You will find the latest manual and the time.txt file.

On the left side of your watch, unscrew the center knob. The USB port is here. Plug one end of the included USB cable into the port on your watch. This should go all the way into the watch. Then, connect the other end to a USB port on your PC. PLEASE CONNECT DIRECTLY to a USB port ON THE COMPUTER!! DO NOT USE A HUB.

In a few moments, your PC will automatically find and install your watch. Your watch will appear as an External Device or Removable Disk.

This is how you will access your video, photo and audio files to save them to your PC. This is also how you charge your watch. But you can also charge your watch via a power outlet by using the included wall adapter.

Charging the first time may take several hours. You may access your files during charging.

USB Port

Now, download the files you will need to setup your product.

USB Cable



From the TECH SUPPORT tab of your Product Page...

Right-click on the TIME.TXT file and choose SAVE LINK AS or SAVE TARGET AS.

You are going to SAVE the TIME.TXT file to your watch. See photo for proper location. Do not change the file name, it must be TIME.TXT.

SETTING TIME STAMPNow, use Windows Explorer (the file explorer, not the internet browser), or the Mac Finder to locate your watch. When you plugged it in, your computer automatically connected to it. In this example in Windows, the watch appears as REMOVABLE DISK F: Your removable disk letter might be different. Keep in mind what the location is for the next step.

Your Watch(drive letter may vary)

Time file is saved in this

space



Save the TIME.TXT to the location shown.

After saving to above loation, DOUBLE CLICK the file and a text editor (see next page) should appear

SETTING TIME STAMP continued

Your Watch(drive letter may vary)

Save the TIME.TXT file in proper location

Please note: some computers may not show the “.txt” of the file name. This is normal.



Adjust the time. DO NOT DISTURB THE FORMAT. Just change the numbers to show correct YEAR The above shows YEAR (2013) MONTH (10) Day (08) HOUR (09) MINUTES(43) SECONDS(32).

2013.05.31 13:15:00 Y

When complete, SAVE this file and exit your text editor. (Click FILE, then SAVE)

After SAVING, unplug your watch, turn on and do a test video (see next page for RECORDING VIDEO section). This should allow the time file to be ABSORBED and the time stamp adjusted. If your time stamp in the test video is not correct, please repeat steps.

SETTING TIME STAMP..cont..d



KNOBS, Explained

There are two knobs that are included with the watch. One is an audio knob with a hole in it to ensure that audio capture is clear. The other one is a standard knob that is intended to make the watch more weather resistant. Please be cognisant of these two knobs and use the appropriate knob before deployment.

Audio knobStandard ‘weather’ knob

Audio port



RECORDING VIDEO

PROPER WAY TO HOLD WATCH TO RECORD VIDEO: Turn your wrist to face the camera towards your subject. The camera should be located at the top when your wrist is turned. This position will record the image properly. (as usual do a few test recordings to familiarize yourself with the device!)

POWER ON: Turn unit on by pressing ON/OFF button and holding down until BLUE light turns on. Release button. Blue light will remain ON.

POWER OFF: Turn unit off by pressing ON/OFF button and holding down until BLUE light turns off Release button.

INFRA RED MODE: You can turn on the infrared illuminators to give you better vision in the dark. Do the following: - After turning unit on to standby (steady blue light), Press and HOLD the INFRA RED button until the indicator light starts to blink. Release. Light will blink THREE times and return to a steady BLUE/RED. You are now in infra red recording mode. To continue with video recording, firmly perss and rleease the VIDEO button. Light will blink quickly and go off. You are now recording video in INFRA RED mode. To stop recording pres POWER button and unit will return to BLUE/RED (infrared standby) mode. Repeat as necessary.

VIDEO RECORDING: After turning unit on, firmly press and release same button. Blue light will blink twice and turn off. You are now recording video. To stop video recordng firmly press and release same button (ON/OFF). Blue light will return. Repeat as necessary.

ON/OFF/VIDEOStatus Light

MODE & INFRA RED



TAKING PICTURES

• TURN On unit to standby position (steady blue light). • FIRMLY press and release MODE button TWICE, SLOWLY. Indicator light will now be

STEADY RED. You are now in CAMERA mode.• PRESS AND RELEASE POWER button. RED light will blink once. You just took a

picture! Repeat as necessary


CAMERA

Camera

POWERON/OFF



VOICE ACTIVATED MODE

• TURN UNIT ON to standby mode • (THERE MUST BE TOTAL SILENCE to set this mode!) Press MODE button ONCE and

release, THEN again and release Now press POWER button and release. You should now see a faint steady BLUE/RED light. Unit is now in voice activation mode. Set watch where you want. As soon as voice is detected, the indicator light will blink quickly and turn off. Unit is now recording. IMPORTANT: Once unit begins recording, it will continue until you manually stop video recording. You do that by pressing the POWER button once, which will return unit back to VOICE ACTIVATED STANDBY MODE (steady BLUE/RED light). it will not go back into standby mode when silence returns. You will need to return it to Voice activated standby mode.

• To return unit to regular standby (STEADY BLUE) press the MODE button once (from voice activated standby mode) and indicator light should return to STEADY BLUE light.

You must be in Stand By Mode first before you can switch to another mode. If you are not sure what mode you are in, simply turn unit off and start over.


CAMERA POWERON/OFF



RETRIEVING YOUR FILESTo view your videos and photos, we recommend that you copy them to your PC first. You may play them on directly from your watch, however the play may not be smooth.

Make sure your watch is OFF. Then connect the USB cable to it as noted earlier in the manual. Connect the other end to your PC. After a few moments, you can access the files on your watch.

Please COPY your files to your PC for best playback.

Double click this folder to reveal recorded files



RETRIEVING YOUR FILES

Video File (.avi)

You may go into the folders noted above to view and copy your files.

You may also delete files from these folders.

NOTE: Mac users must empty their trash before disconnecting your watch after deleting files.

Please refer to the Suggested Software page near the end of this manual if you have trouble playing any files.

Photo File (.jpg)



Your Windows PC or Mac has built-in software that will play most of the files created by devices like yours. However, if you are having problems playing your files, or need more options, please download and try these programs.

This software is free and can be downloaded directly from the links below. You can find support and tutorials for these programs on their respective websites. SafetyBasement can not provide software support for these programs

As with ANY files you download from the internet, be sure to scan them for viruses using your particular virus scanner. While most users report no issues using this software, we can not be responsible for any damage caused by this software. Please proceed carefully. Back up your PC before installing any new software.

VIDEO PLAYBACK - VLC(http://www.videolan.org/vlc/index.html)The VLC Media Player can play almost any video or audio file type. There is a version for Windows and for Mac OS X.

VIDEO EDITING for WINDOWS - MOVIE MAKER 2012(http://windows.microsoft.com/en-US/windows/get-movie-maker-download)Movie Maker is a simple video editing program from Microsoft. Please go to this link, and choose the download for your version of Windows. Please note: Movie Maker is part of the Windows Essentials package.

VIDEO EDITING for MAC OS X - iMOVIE(Visit the Apple Mac App Store for latest version)iMovie is a simple video editing program from Apple. It comes installed with your new Mac. The latest version is also available at the Mac App Store at additional cost.

AUDIO PLAYBACK and EDITING - AUDACITY(http://audacity.sourceforge.net/)Audacity is a popular audio editing program used by amateurs and professionals to edit simple and complex audio projects. You can use Audacity to convert your audio files to another format, such as MP3. There is a version for Windows and Mac OS X.

PHOTOSYour Windows and Mac computers have the ability to do basic editing of photos built in.

SUGGESTED SOFTWARE



Audio Formats WAVAudio Encoding 128 Kbps

WAV Bit Rate Mode ConstantWAV Bit Rate 128 KbpsWAV Sampling Rate 16 Hz

DEVICE SPECIFICATIONSAu

dio

Video Format .AVICodec MJPGBit Rate 29.8 MbpsResolution 1920x1080 pixels (16:9)Frame Rate 30 fps

Audio Format PCMBit Rate Mode ConstantBit Rate 128 Kbps

Vide

o

Photo Format JPGResolution 4,032 x 3,024 pixel

Phot

o



Memory Built In 16 GBMemory Expansion n/aBattery Type Internal Rechargeable for camera

Replacable for watch function

Charger via USB port or included adapter

DEVICE SPECIFICATIONSD

evic

e Inf

o

Please check our site for the latest available manual for this product.

Note

s

File sizes shown are approximate.

Video (10 min) 1 GB

Audio (10 min) 9 MB

Photo 780 KB

File

Siz

es

instruction manual 16gb voice activated ir watch … · product manual voice activated ir watch :...

Documents