Institut Pprime 2018

ACL : Publication dans une revue à comité de lecture : SAAFI H., VULLIEZ M., ZEGHLOUL S., LARIBI M. A. A new serial approach of the Forward Kinematic Model of Spherical Parallel Manipulators for real-time applications PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART C-JOURNAL OF MECHANIC, vol. 232, pp. 1-8, DOI : 10.1177/0954406216688027, 2018 DE RESSEGUIER T. On the shock-based determination of the adhesive strength at a substrate-coating interface JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, vol. 32, pp. 36-49, DOI : 10.1080/01694243.2017.1332502, 2018 HEMERY S., NAIT-ALI A., GUEGUEN M., VILLECHAISE P. Mechanical study of crystalline orientation distribution in Ti-6Al-4V: An assessment of micro-texture induced load partitioning MATERIALS & DESIGN, vol. 137, pp. 22-32, DOI : 10.1016/j.matdes.2017.10.011, 2018 KONTIS P., LI Z., COLLINS D. M., CORMIER J., RAABE D., GAULT B. The effect of chromium and cobalt segregation at dislocations on nickel-based superalloys SCRIPTA MATERIALIA, vol. 145, pp. 76-80, DOI : 10.1016/j.scriptamat.2017.10.005, 2018 BELLEOUD P., SAURY D., LEMONNIER D. Coupled velocity and temperature measurements in an air-filled differentially heated cavity at Ra=1.2E11 INTERNATIONAL JOURNAL OF THERMAL SCIENCES, vol. 123, pp. 151-161, DOI : 10.1016/j.ijthermalsci.2017.09.018, 2018 MASOUMI F., THEBAUD L., SHAHRIARI D., JAHAZI M., CORMIER J., DEVAUX A., FLIPO B. High temperature creep properties of a linear friction welded newly developed wrought Ni-based superalloy MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS : PROPERTIES, MICROSTRUCTURE AND PROCESSING, vol. a 710, pp. 214-226, DOI : 10.1016/j.msea.2017.10.091, 2018 HE W., HAN M., GOUDEAU P., LE BOURHIS E., RENAULT P. O., WANG S., LI L. N. Strain transfer through film-substrate interface and surface curvature evolution during a tensile test APPLIED SURFACE SCIENCE, vol. 434, pp. 771-780, DOI : 10.1016/j.apsusc.2017.09.164, 2018 CHORIN P., MOREAU F., SAURY D. Heat transfer modification in an air-filled differentially heated cavity by localized thermal disturbance INTERNATIONAL JOURNAL OF THERMAL SCIENCES, vol. 125, pp. 101-110, DOI : 10.1016/j.ijthermalsci.2017.11.018, 2018 GIACHETTI B., FENOT M., COUTON D., PLOURDE F. Influence of Reynolds number synthetic jet dynamic in crossflow configuration on heat transfer enhancement INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , vol. 118, pp. 1-13, DOI : 10.1016/j.ijheatmasstransfer.2017.10.097, 2018

LAPLANCHE G., BONNEVILLE J., VARVENNE C., CURTIN W. A., GEORGE E. P. Thermal activation parameters of plastic flow reveal deformation mechanisms in the C CoCrFeMnNi high-entropy alloy ACTA MATERIALIA, vol. 143, pp. 257-264, DOI : 10.1016/j.actamat.2017.10.014, 2018 FRANCISCO A., BLONDEL C., BRUNETIERE N., RAMDARSHAN A., MERCERON G. Enamel surface topography analysis for diet discrimination. A methodology to enhance and select discriminative parameters SURFACE TOPOGRAPHY: METROLOGY AND PROPERTIES, vol. 6, pp. ---, DOI : 10.1088/2051-672X/aa9dd3, 2018 MENEVEAUX D., BRINGIER B., TAUZIA E., RIBARDIERE M., SIMONOT L. Rendering rough opaque materials with interfaced Lambertian microfacets IEEE TRANSACTION ON VISUALIZATION AND COMPUTER GRAPHICS, vol. 24, pp. 1368-1380, DOI : 10.1109/TVCG.2017.2660490, 2018 DAIRAY T., LAMBALLAIS E., BENHAMADOUCHE S. Mesh Node Distribution in Terms of Wall Distance for Large-eddy Simulation of Wall-bounded Flows FLOW TURBULENCE AND COMBUSTION, vol. 100, pp. 617-626, DOI : 10.1007/s10494-017-9863-5, 2018 VALLE V., LAOU L., LEANDRY I., YOTTE S., ROSSIGNOL S., HEDAN S. Crack Analysis in Mudbricks under Compression Using Specific Development of Stereo-Digital Image Correlation EXPERIMENTAL MECHANICS, vol. 58, pp. 475-486, DOI : 10.1007/s11340-017-0363-2, 2018 DUPRE J. C., DOUMALIN P., BELRHITI Y., KHLIFI I. Detection of cracks in refractory materials by an enhanced digital image correlation technique JOURNAL OF MATERIAL SCIENCES, vol. 53, pp. 977-993, DOI : 10.1007/s10853-017-1550-3, 2018 SINCHUK Y., PANNIER Y., GUEGUEN M., TANDIANG D., GIGLIOTTI M. Computed-Tomography based Modelling and Simulation of the Moisture Diffusion and Swelling of Textile Composite Materials INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, vol. 154, pp. 88-96, DOI : 10.1016/j.ijsolstr.2017.05.045, 2018 ALMEIDA ALVESA C. F., MANSILLA C., PEREIRA L., PAUMIER F., GIRARDEAU T., CARVALHO P. Influence of magnetron sputtering conditions on the chemical bonding, structural, morphological and optical behavior of Ta1-xOx coatings SURFACE & COATINGS TECHNOLOGY, vol. 334, pp. 105-115, DOI : 10.1016/j.surfcoat.2017.11.001, 2018 HEMERY S., NIZOU P., VILLECHAISE P. In situ SEM investigation of slip transfer in Ti-6Al-4V: Effect of applied stress MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS : PROPERTIES, MICROSTRUCTURE AND PROCESSING, vol. 709, pp. 277-284, DOI : 10.1016/j.msea.2017.10.058, 2018 BEAUDOIN A., HUBERSON S., DE DREUZY J. R. Adapting particle methods to model the dynamics of concentration gradients and chemical reactivity under advective diffusive transport conditions JOURNAL OF COMPUTATIONAL PHYSICS, vol. 354, pp. 196-210, DOI : 10.1016/j.jcp.2017.10.037, 2018

NAGARAJAN K. K., SINGHA S., CORDIER L., AIRIAU C. Open-loop control of cavity noise using Proper Orthogonal Decomposition reduced-order model COMPUTERS & FLUIDS , vol. 160, pp. 1-13, DOI : 10.1016/j.compfluid.2017.10.019, 2018 MOCUTA C., STANESCU S., GALLARD M., BARBIER A., DAWIEC A., KEDJAR B., LECLERCQ N., THIAUDIERE D. Fast X-ray reflectivity measurements using an X-ray pixel area detector at the DiffAbs beamline, Synchrotron SOLEIL JOURNAL OF SYNCHROTRON RADIATION, vol. 25, pp. 204-213, DOI : 10.1107/S1600577517015703, 2018 PRUDHOMME G., BILLY F., ALEXIS J., BENOIT G., HAMON F., LARIGNON C., ODEMER G., BLANC C., HENAFF G. Effect of actual and accelerated ageing on microstructure evolution and mechanical properties of a 2024-T351 aluminium alloy INTERNATIONAL JOURNAL OF FATIGUE, vol. 107, pp. 60-71, DOI : 10.1016/j.ijfatigue.2017.10.015, 2018 AZINA C., ROGER J., JOULAIN A., MAUCHAMP V., MORTAIGNE B., LU Y., SILVAIN J.-F. Solid-liquid co-existent phase process: Towards fully dense and thermally efficient Cu/C composite materials JOURNAL OF ALLOYS AND COMPOUNDS, vol. 738, pp. 292-300, DOI : 10.1016/j.jallcom.2017.12.196, 2018 MEZON C., MOURZENKO V., THOVERT J.-F., ANTOINE R., FONTAINE F., FINIZOLA A., ADLER P. M. Thermal convection in three-dimensional fractured porous media PHYSICAL REVIEW E , vol. 97, pp. 013106--, DOI : 10.1103/PhysRevE.97.013106, 2018 RODRIGUEZ-LOPEZ E., BRIZZI L. E., VALEAU V., BRUCE P. J. K., BUXTON O. R. H. Aeroacoustic Characterization of Single- and Multiscale Porous Fences AIAA JOURNAL , vol. 56, pp. 264-278, DOI : 10.2514/1.J056057, 2018 BRUNETIERE N. A General Model for Liquid and Gas Lubrication, Including Cavitation JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME , vol. 140, pp. 021702--, DOI : 10.1115/1.4037355, 2018 OLBINADO M. P., CANTELLI V., MATHON O., PASCARELLI S., GRENZER J., PELKA A., ROEDEL M., PRENCIPE I., GARCIA A. L., HELBIG U., KRAUS D., SCHRAMM U., COWAN T., SCHEEL M., PRADEL P., DE RESSEGUIER T., RACK A. Ultra high-speed x-ray imaging of laser-driven shock compression using synchrotron light JOURNAL OF PHYSICS D-APPLIED PHYSICS, vol. 51, pp. 055601--, DOI : 10.1088/1361-6463/aaa2f2, 2018 TECHER A., MOULE Y., LEHNASCH G., MURA A. Mixing of Fuel Jet in Supersonic Crossflow: Estimation of Subgrid-Scale Scalar Fluctuations AIAA JOURNAL , vol. 56, pp. 465-481, DOI : 10.2514/1.J056251, 2018 MICHALSKI Q., PAREJO C. J. B., CLAVERIE A., SOTTON J., BELLENOUE M. An application of speckle-based background oriented schlieren for optical calorimetry EXPERIMENTAL THERMAL AND FLUID SCIENCE, vol. 91, pp. 470-478, DOI : 10.1016/j.expthermflusci.2017.09.012, 2018 GOMIT G., ACHER G., CHATELLIER L., DAVID L. Uncertainty analysis of an optical method for pressure estimation in fluid flows MEASUREMENT SCIENCE & TECHNOLOGY , vol. 29, pp. 024004--, DOI : 10.1088/1361-6501/aa99c0, 2018 JEON Y. J., GOMIT G., EARL T., CHATELLIER L., DAVID L. Sequential least-square reconstruction of instantaneous pressure field around a body from TR-PIV EXPERIMENTS IN FLUIDS , vol. 59, pp. ---, DOI : 10.1007/s00348-018-2489-0, 2018

TOPIC M., PICHON L., NSENGIYUMVA S., FAVARO G., DUBUISSON M., HALINDINTWALI S., MAZWI S., SIBANYONI J., MTSHALI C. M., CORIN K. The effect of surface oxidation on hydrogen absorption in Ti-6Al-4V alloy studied by elastic recoil detection (ERD), X-ray diffraction and nanohardness techniques JOURNAL OF ALLOYS AND COMPOUNDS, vol. 740, pp. 879-886, DOI : 10.1016/j.jallcom.2017.11.269, 2018 BEJAUD R., DURINCK J., BROCHARD S. The effect of surface step and twin boundary on deformation twinning in nanoscale metallic systems COMPUTATIONAL MATERIALS SCIENCE, vol. 145, pp. 116-125, DOI : 10.1016/j.commatsci.2017.12.035, 2018 ONO H., NAIT-ALI A., KANE DIALLO O., BENOIT G., CASTAGNET S. Influence of pressure cycling on damage evolution in an unfilled EPDM exposed to high-pressure hydrogen INTERNATIONAL JOURNAL OF FRACTURE , vol. 210, pp. 137-152, DOI : 10.1007/s10704-018-0266-y, 2018 VAZQUEZ P., PEREZ A. T., TRAORE P., WU J. Electroconvection in a dielectric liquid between two concentric half-cylinders with rigid walls: Linear and nonlinear analysis PHYSICAL REVIEW E , vol. 97, pp. ---, DOI : 10.1103/PhysRevE.97.023106, 2018 THEBAUD L., VILLECHAISE P., CROZET C., DEVAUX A., BECHET D., FRANCHET J.-M., ROUFFIE A. L., CORMIER J. Is there an optimal grain size for creep resistance in Ni-based disk superalloys? MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS : PROPERTIES, MICROSTRUCTURE AND PROCESSING, vol. 716, pp. 274-283, DOI : 10.1016/j.msea.2017.12.104, 2018 DARTOIS A., BEAUDOIN A., HUBERSON S. Impact of local diffusion on macroscopic dispersion in three-dimensional porous media COMPTES RENDUS MECANIQUE, vol. 346, pp. 89-97, DOI : 10.1016/j.crme.2017.12.012, 2018 ABADIAS G., CHASON E., KECKES J., SEBASTIANI M., THOMPSON G. B., BARTHEL E., DOLL G. L., MURRAY E., STOESSEL C. H., MARTINU L. Review Article: Stress in thin films and coatings: Current status, challenges, and prospects JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, vol. 36, pp. 020801--, DOI : 10.1116/1.5011790, 2018 AIT-OUBBA A., COUPEAU C., DURINCK J., TALEA M., GRILHE J. Effect of surface on the dissociation of perfect dislocations into Shockley partials describing the herringbone Au(1 1 1) surface reconstruction PHILOSOPHICAL MAGAZINE, vol. 98, pp. 1594-1607, DOI : 10.1080/14786435.2018.1447702, 2018 This work was partially funded by the French Government program Investissements d'Avenir [LABEX INTERACTIFS grant number ANR-11-LABX-0017-01] AYOUBI Y., LARIBI M. A., COURREGES F., ZEGHLOUL S., ARSICAULT M. Complete design methodology of biomimetic safety device for cobots' prismatic joints ROBOTICS AND AUTONOMOUS SYSTEMS, vol. 102, pp. 44-53, DOI : 10.1016/j.robot.2018.01.008, 2018 BEJAUD R., DURINCK J., BROCHARD S. Twin-interface interactions in nanostructured Cu/Ag: Molecular dynamics study ACTA MATERIALIA, vol. 144, pp. 314-324, DOI : 10.1016/j.actamat.2017.10.036, 2018

BEKKARA F., DASCALESCU L., BENMIMOUN Y., ZEGHLOUL T., TILMATINE A., ZOUZOU N. Modification of surface characteristic and tribo-electric properties of polymers by DBD plasma in atmospheric air EUROPEAN PHYSICAL JOURNAL-APPLIED PHYSICS , vol. 81, pp. 10801--, DOI : 10.1051/epjap/2017170149 , 2018 BOUKHARFANE R., BOUALI Z., MURA A. Evolution of scalar and velocity dynamics in planar shock-turbulence interaction SHOCK WAVES , vol. 28, pp. 1117-1141, DOI : 10.1007/s00193-017-0798-5, 2018 BOUKHARFANE R., EUGENIO RIBEIRO F. H., BOUALI Z., MURA A. A combined ghost-point-forcing / direct-forcing immersed boundary method (IBM) for compressible flow simulations COMPUTERS & FLUIDS , vol. 162, pp. 91-112, DOI : 10.1016/j.compfluid.2017.11.018, 2018 BRUNETIERE N., BLOUIN A., KASTANE G. Conditions of Lift-Off and Film Thickness in Squeeze Film Levitation JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME , vol. 140, pp. 031705--, DOI : 10.1115/1.4038805, 2018 CHORIN P., MOREAU F., SAURY D. Heat transfer modification induced by a localized thermal disturbance in a differentially-heated cavity INTERNATIONAL JOURNAL OF THERMAL SCIENCES, vol. 125, pp. 101-110, DOI : 10.1016/j.ijthermalsci.2017.11.018, 2018 DEVILLE L., ARGHIR M. Theoretical analysis of brush seals leakage using local computational fluid dynamics estimated permeability laws JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, vol. 140, pp. 062803--, DOI : 10.1115/1.4038469, 2018 ER-RAIY A., BOUALI Z., REVEILLON J., MURA A. Optimized single-step (OSS) chemistry models for the simulation of turbulent premixed flame propagation COMBUSTION AND FLAME, vol. 192, pp. 130-148, DOI : 10.1016/j.combustflame.2018.01.038, 2018 FRITEL X., GACHON B., DESSEAUVE D., THUBERT T. Anal incontinence and obstetrical anal sphincter injuries, epidemiology and prevention GYNECOLOGIE OBSTETRIQUE FERTILITE ET SENOLOGIE, vol. 46, pp. 419-426, DOI : 10.1016/j.gofs.2018.01.004., 2018 GACHON B., DESGRANGES M., FRADET L., DECATOIRE A., POIREAULT F., PIERRE F., FRITEL X., DESSEAUVE D. Is increased peripheral ligamentous laxity in term pregnant women associated with obstetric anal sphincter injury? INTERNATIONAL UROGYNECOLOGY JOURNAL, vol. 29, pp. 1589-1595, DOI : 10.1007/s00192-018-3598-2., 2018 GRISSA K., BENSELAMA A., LATAOUI Z., BERTIN Y., JEMNI A. Investigations of the thermal performance of a cylindrical wicked heat pipe INTERNATIONAL JOURNAL OF ENERGY RESEARCH , vol. 42, pp. 3048-3058, DOI : 10.1002/er.3973, 2018 GUILLAUD N., BALARAC G., GONCALVES E. Large Eddy Simulations on a pitching airfoil: Analysis of the reduced frequency influence COMPUTERS & FLUIDS , vol. 161, pp. 1-13, DOI : 10.1016/j.compfluid.2017.11.002, 2018

NOLI F., PICHON L., OZTURK O. The Influence of Plasma-Based Nitriding and Oxidizing Treatments on the Mechanical and Corrosion Properties of CoCrMo Biomedical Alloy METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol. 49, pp. 1383-1396, DOI : 10.1007/s11661-018-4487-5, 2018 HENRY Y., BOUYER J., FILLON M. Experimental analysis of the hydrodynamic effect during start-up of fixed geometry thrust bearings TRIBOLOGY INTERNATIONAL , vol. 120, pp. 299-308, DOI : 10.1016/j.triboint.2017.12.021, 2018 KAWAMURA T., KANNO M., STAUSS S., KURIBARA K., PAI D. Z., ITO T., TERASHIMA K. Generation and characterization of field-emitting surface dielectric barrier discharges in liquids JOURNAL OF APPLIED PHYSICS, vol. 123, pp. ---, DOI : 10.1063/1.5011445, 2018 KROMER R., CORMIER J., COSTIL S., COURAPIED D., BERTHE L., PEYRE P. High temperature durability of a bond-coatless plasma-sprayed thermal barrier coating system with laser textured Ni-based single crystal substrate SURFACE & COATINGS TECHNOLOGY, vol. 337, pp. 168-176, DOI : 10.1016/j.surfcoat.2018.01.006, 2018 LE GRAVEREND J. B., PETTINARI-STURMEL F., CORMIER J., HANTCHERLI M., VILLECHAISE P., DOUIN J. Mechanical twinning in Ni-based single crystal superalloys during multiaxial creep at 1050?°C MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS : PROPERTIES, MICROSTRUCTURE AND PROCESSING, vol. 722, pp. 76-87, DOI : 10.1016/j.msea.2018.02.086, 2018 NICOLAÃ J., FURGEAUD C., FONROSE B. W., BAIL C., BEAUFORT M. F. Formation mechanisms of Ti2AlC MAX phase on SiC-4H using magnetron sputtering and post-annealing MATERIALS & DESIGN, vol. 144, pp. 209-213, DOI : 10.1016/j.matdes.2018.02.046, 2018 VLASENKO A. V., BENEDIKTOVITCH A., ULYANENKOV A., UGLOV V. V., ABADIAS G., O'CONNELL P. A., VAN VUUREN J. Microstructure Characterization of Multilayer Thin Coatings ZrN/Si3N4 by X-Ray Diffraction Using Noncoplanar Measurement Geometry PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, vol. 215, pp. 1700670--, DOI : 10.1002/pssa.201700670, 2018 TRESSOU B., VAZIRI R., NADOT-MARTIN C. Application of the incremental variational approach (EIV model) to the linear viscoelastic homogenization of different types of microstructures: long fiber-, particle-reinforced and strand-based composites EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, vol. 68, pp. 104-116, DOI : 10.1016/j.euromechsol.2017.10.006, 2018 ORDONEZ-MIRANDA J., HILL J. M., JOULAIN K., EZZAHRI Y., DREVILLON J. Conductive thermal diode based on the thermal hysteresis of VO2 and nitinol JOURNAL OF APPLIED PHYSICS, vol. 123, pp. 085102--, DOI : 10.1063/1.5019854, 2018 ORDONEZ-MIRANDA J., LEMONNIER D., EZZAHRI Y., JOULAIN K. Analytical description of the radiative-conductive heat transfer in a gray medium contained between two diffuse parallel plates APPLIED MATHEMATICAL MODELLING , vol. 56, pp. 51-64, DOI : 10.1016/j.apm.2017.11.033, 2018 PAP B., FILLON M., GUILLEMONT M., BAUDUIN L., CHOCRON J., GEDIN P., BIADALLA L. Experimental and numerical analysis on the seizure of a carbon-filled PTFE central groove journal bearing during start-up period LUBRICANTS, vol. 6, pp. 1-24, DOI : 10.3390/lubricants6010014, 2018

PEPIN J., LAINE E., GRANDIDIER J., BENOIT G., MELLIER D., WEBER M., LANGLOIS C. Replication of liner collapse phenomenon observed in hyperbaric type IV hydrogen storage vessel by explosive decompression experiments INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, vol. 43, pp. 4671-4680, DOI : 10.1016/j.ijhydene.2018.01.022, 2018 PIZZAGALLI L., GODET J., BROCHARD S. Influence of strain on dislocation core in silicon PHILOSOPHICAL MAGAZINE, vol. 98, pp. 1151-1169, DOI : 10.1080/14786435.2018.1431412, 2018 RAMADAN I. A., BAILLIET H., VALIERE J. C. Experimental investigation of the influence of natural convection and end-effects on Rayleigh streaming in a thermoacoustic engine THE JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, vol. 143, pp. 361-372, DOI : 10.1121/1.5021331, 2018 SETH U. K., TRAORE P., DURAN-OLIVENCIA F. J., MOREAU E., VAZQUEZ P. Parametric study of a DBD plasma actuation based on the Suzen-Huang model JOURNAL OF ELECTROSTATICS, vol. 93, pp. 1-9, DOI : 10.1016/j.elstat.2018.02.003, 2018 LABEX INTERACTIFS, Reference ANR-11-LABX-0017-01) UGLOV V. V., ABADIAS G., ZLOTSKI S., KVASOV N., SALADUKHIN I. A., MALASHEVIH A. A. Blister formation in ZrN/SiN multilayers after He irradiation SURFACE & COATINGS TECHNOLOGY, vol. 344, pp. 170-176, DOI : 10.1016/j.surfcoat.2018.02.095, 2018 LE FEBVRIER A., NONG N. V., ABADIAS G., EKLUND P. P-type Al-doped Cr-deficient CrN thin films for thermoelectrics APPLIED PHYSICS EXPRESS, vol. 11, pp. 051003--, DOI : 10.7567/APEX.11.051003V, 2018 YADALA S., HEHNER M. T., SERPIERI J., BENARD N., DÖRR P. C., KLOKER M. J., KOTSONIS M. Experimental control of swept-wing transition through base-flow modification by plasma actuators JOURNAL OF FLUID MECHANICS , vol. 844, pp. 1-11, DOI : 10.1017/jfm.2018.268, 2018 French Government programme 'Investissements d'Avenir' (LABEX INTERACTIFS) [ANR-11-LABX-0017-01] PROD'HOMME H., ORDONEZ-MIRANDA J., EZZAHRI Y., DREVILLON J., JOULAIN K. VO2 -based radiative thermal transistor with a semi-transparent base JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER, vol. 210, pp. 52-61, DOI : 10.1016/j.jqsrt.2018.02.005, 2018 BELGACEM A., TILMATINE A., BELLEBNA Y., MILOUA F., ZOUZOU N., DASCALESCU L. Experimental Analysis of the Transport and the Separation of Plastic and Metal Micronized Particles using Travelling Waves Conveyor IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION , vol. 25, pp. 435-440, DOI : 10.1109/TDEI.2017.006601, 2018 REGUIG A., BENDAOUD A., TILMATINE A., MEDLES K., DASCALESCU L. Effect of Shielded Electrodes Dimensions on Corona Charging Systems IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION , vol. 25, pp. 396-403, DOI : 10.1109/TDEI.2017.006520, 2018 NASSOUR K., BRAHAMI M., TILMATINE A., NEMMICH S., MILOUA F., RAMDANI N., ZOUZOU N. Comparative Experimental Analysis of Ozone Generation between Surface and Volume DBD Generators IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION , vol. 25, pp. 428-434, DOI : 10.1109/TDEI.2017.006600, 2018

DAIOUI K., REZOUG M., BENDAOUD A., MEDLES K., DASCALESCU L. Neutralisation of Electrically-charged Insulating Granular Materials IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION , vol. 25, pp. 441-447, DOI : 10.1109/TDEI.2017.006602, 2018 ROUAGDIA K., NEMAMCHA M., HEROUS L., DASCALESCU L. Robust Design of Neutralization Process of the Residual Electric Charge on the Surface of PP-Films IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION , vol. 25, pp. 377-382, DOI : 10.1109/TDEI.2017.006423, 2018 KACHI M., NADJEM A., MOUSSAOUI A., DASCALESCU L., ZOUZOU N. Corona Discharge as Affected by the Presence of Various Dielectric Materials on the Surface of a Grounded Electrode IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION , vol. 25, pp. 390-395, DOI : 10.1109/TDEI.2017.006493 , 2018 MELLOUKI H., HEROUS L., NEAGOE B., PRAWATYA Y., ZEGHLOUL T., DASCALESCU L. Experimental Modeling of the Conformal-Contact Tribocharging of Polymers IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION , vol. 25, pp. 145-153, DOI : 10.1109/TDEI.2018.006880, 2018 HEMERY S., DANG V. T., SIGNOR L., VILLECHAISE P. Influence of Microtexture on Early Plastic Slip Activity in Ti-6Al-4V Polycrystals METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol. 49, pp. 2048-2056, DOI : 10.1007/s11661-018-4569-4, 2018 BUTTAY R., LEHNASCH G., MURA A. Turbulent mixing and molecular transport in highly under-expanded hydrogen jets INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, vol. 43, pp. 8488-8505, DOI : 10.1016/j.ijhydene.2018.03.054, 2018 SINCHUK Y., PANNIER Y., GUEGUEN M., GIGLIOTTI M. Image-based modeling of moisture-induced swelling and stress in 2D textile composite materials using a global-local approach PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART C-JOURNAL OF MECHANIC, vol. 232, pp. 1505-1519, DOI : doi.org/10.1177/0954406217736789, 2018 (LABEX INTERACTIFS) [ANR-11-LABX-0017-01] (EQUIPEX GAP) [ANR-11-EQPX-0018] DOMFANG J.-N., HENAFF G., NADOT Y., NICOLAÃ J., RIDOSZ L. Fatigue resistance of selectively laser melted aluminum alloy under T6 heat treatment PROCEDIA ENGINEERING, vol. 213, pp. 79-88, DOI : 10.1016/j.proeng.2018.02.009, 2018 MOREAU E., CAZOUR J., BENARD N. Influence of the air-exposed active electrode shape on the electrical, optical and mechanical characteristics of a surface dielectric barrier discharge plasma actuator JOURNAL OF ELECTROSTATICS, vol. 93, pp. 146-153, DOI : 10.1016/j.elstat.2018.04.005, 2018 LABEX INTERACTIFS, reference ANR-11-LABX-0017-01, and ANR ASTRIDINOPLAS, ANR-13-ASTR-0015-01) and the DGA supervision MOREAU E., AUDIER P., BENARD N. Ionic wind produced by positive and negative corona discharges in air JOURNAL OF ELECTROSTATICS, vol. 93, pp. 85-96, DOI : 10.1016/j.elstat.2018.03.009, 2018 LABEX INTERACTIFS, reference ANR-11-LABX-0017-01

IBEN HOURIA M., NADOT Y., FATHALLAH R., MAIJER D., GORGE A. Through process Modeling applied to the fatigue design of cast A356-T6 components ENGINEERING FRACTURE MECHANICS JOURNAL, vol. 195, pp. 267-278, DOI : 10.1016/j.engfracmech.2018.04.013, 2018 HAMIDOUCHE S., CALLUAUD D., PINEAU G., TEXIER A. Study of instantaneous flow behind a single fixed ripple JOURNAL OF HYDRO-ENVIRONMENT RESEARCH, vol. 19, pp. 117-127, DOI : 10.1016/j.jher.2018.03.002, 2018 ALAILI K., ORDONEZ-MIRANDA J., EZZAHRI Y. Effective interface thermal resistance and thermal conductivity of dielectric nanolayers INTERNATIONAL JOURNAL OF THERMAL SCIENCES, vol. 131, pp. 40-47, DOI : 10.1016/j.ijthermalsci.2018.05.024, 2018 GOMEZ-HEREDIA C. L., RAMIREZ-RINCON J. A., ORDONEZ-MIRANDA J., ARES O., ALVARADO-GIL J. J., CHAMPEAUX C., EZZAHRI Y., JOULAIN K. Thermal hysteresis measurement of the VO 2 emissivity and its application in thermal rectification SCIENTIFIC REPORTS, vol. 8, pp. 1-11, DOI : 10.1038/s41598-018-26687-9, 2018 SIMAR A., GIGLIOTTI M., GRANDIDIER J., AMMAR-KHODJA I. Decoupling of water and oxygen diffusion phenomena in order to prove the occurrence of thermo-oxidation during hygrothermal aging of thermosetting resins for RTM composite applications JOURNAL OF MATERIAL SCIENCES, vol. 53, pp. 11855-11872, DOI : 10.1007/s10853-018-2350-0, 2018 AUDIBERT C., ANDREANI A.-S., LAINE E., GRANDIDIER J. Mechanical characterization and damage mechanism of a new flax-Kevlar hybrid/epoxy composite COMPOSITE STRUCTURES, vol. 195, pp. 126-135, DOI : 10.1016/j.compstruct.2018.04.061, 2018 reference ANR-11-EQPX-0018 CORONEL S. A., MELGUIZO-GAVILANES J., MEVEL R., SHEPHERD J. E. Experimental and numerical study on moving hot particle ignition COMBUSTION AND FLAME, vol. 192, pp. 495-506, DOI : 10.1016/j.combustflame.2018.02.027, 2018 COLIN J. Equilibrium Shapes of Coherent Precipitates Near a surface MECHANICS OF MATERIALS , vol. 117, pp. 22-31, DOI : 10.1016/j.mechmat.2017.10.007, 2018 COLIN J., BONNEVILLE J., GRILHE J. Dislocation-based description of the sliding of a free-surface emerging grain boundary ACTA MECHANICA, vol. , pp. 1-8, DOI : 10.1007/s00707-018-2168-5, 2018 COLIN J. Effect of stress and interface kinetics on the growth of a cylinder of ternary alloy in contact with its melt JOURNAL OF CRYSTAL GROWTH, vol. 493, pp. 76-83, DOI : 10.1016/j.jcrysgro.2018.04.029, 2018 Eramus+ program support- ing COLIN J. Dislocation formation in a strained pyramidal bilayer island INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, vol. 144-145, pp. 213-217, DOI : 10.1016/j.ijsolstr.2018.05.003, 2018 NEZ A., FRADET L., LAGUILLAUMIE P., MONNET T., LACOUTURE P. Simple and efficient thermal calibration for MEMS gyroscopes MEDICAL ENGINEERING & PHYSICS , vol. 55, pp. 60-67, DOI : 10.1016/j.medengphy.2018.03.002., 2018

SAMSON M., MONNET T., BERNARD A., LACOUTURE P., DAVID L. Comparative study between fully tethered and free swimming at different paces of swimming in front crawl SPORTS BIOMECHANICS, vol. , pp. 1-16, DOI : 10.1080/14763141.2018.1443492, 2018 SAMSON M., MONNET T., BERNARD A., LACOUTURE P., DAVID L. Analysis of a swimmer's hand and forearm in impulsive start from rest using computational fluid dynamics in unsteady flow conditions JOURNAL OF BIOMECHANICS, vol. 67, pp. 157-165, DOI : 10.1016/j.jbiomech.2017.12.003, 2018 VULLIEZ P., GAZEAU J. P., LAGUILLAUMIE P., MNYUSIWALLA H. Focus on the mechatronics design of a new dexterous robotic hand for inside hand manipulation", A paraitre dans Robotica ROBOTICA, vol. 36, pp. 1206-1224, DOI : 10.1017/S0263574718000346, 2018 [ANR-10-EQPX-44]; Nouvelle Aquitaine Region (program "CPERNumeric"); European Union(FEDER/ERDF, European Regional Development Fund); French National Research Agency (ANR) through the SEAHAND program [ANR-15-CE10-0004] SAAFI H., LARIBI M. A., ZEGHLOUL S., ARSICAULT M. On the Development of a New Master Device Used for Medical Tasks JOURNAL OF MECHANISMS AND ROBOTICS, vol. 10, pp. 044501-1-044501-6, DOI : 10.1115/1.4039590, 2018 MATAVELI SUAVE L., SERRANO-MUNOZ I., GAUBERT A., BENOIT G., MARCIN L., KONTIS P., VILLECHAISE P., CORMIER J. Thin-wall debit in creep of DS200+Hf alloy METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol. 49a, pp. 4012-4028, DOI : 10.1007/s11661-018-4708-y, 2018 SCHWALBE C., CORMIER J., JONES D., GALINDO-NAVA E., RAE C. M. F. Investigating the dislocation driven micro-mechanical response under non-isothermal creep conditions in single-crystal superalloys METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol. 49a, pp. 3988-4002, DOI : 10.1007/s11661-018-4764-3, 2018 HAMADI S., HAMON F., DELAUTRE J., CORMIER J., VILLECHAISE P., UTADA S., KONTIS P., BOZZOLO N. Consequences of a room temperature plastic deformation during processing on creep durability of a Ni-based SX superalloy METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol. 49, pp. 4246-4261, DOI : 10.1007/s11661-018-4748-3, 2018 CERVELLON A., CORMIER J., MAUGET F., HERVIER Z., NADOT Y. Very high cycle fatigue of Ni-based single crystal superalloys at high temperature METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol. 49a, pp. 3938-3950, DOI : 10.1007/s11661-018-4672-6, 2018 AGNOLI A., GALL C. L. ., THEBAUD L., MARIN E., CORMIER J. Mechanical properties evolution of g'/g'' nickel-base superalloys during long term thermal over-aging METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol. 49a, pp. 4290-4300, DOI : 10.1007/s11661-018-4778-x, 2018 JAUNET V., BRAUD C. Experiments on lift dynamics and feedback control of a wind turbine blade section RENEWABLE ENERGY, vol. 126, pp. 65-78, DOI : 10.1016/j.renene.2018.03.017, 2018

MELIGA P., BOUJO E., MELDI M., GALLAIRE F. Revisiting the drag reduction problem using adjoint-based distributed forcing of laminar and turbulent flows over a circular cylinder EUROPEAN JOURNAL OF MECHANICS - B/FLUIDS, vol. 72, pp. 123-134, DOI : 10.1016/j.euromechflu.2018.03.009, 2018 MELDI M., SAGAUT P. Investigation of anomalous very fast decay regimes in homogeneous isotropic turbulence JOURNAL OF TURBULENCE, vol. 19, pp. 390-413, DOI : 10.1080/14685248.2018.1450506, 2018 HIEN S., ROLLAND J., BORCHERT S., SCHOON L., ZULÃ CKE C., ACHATZ U. Spontaneous inertia-gravity wave emission in the differentially heated rotating annulus experiment JOURNAL OF FLUID MECHANICS , vol. 838, pp. 5-41, DOI : 10.1017/jfm.2017.883, 2018 ROLLAND J. Extremely rare collapse and build-up of turbulence in stochastic models of transitional wall flows PHYSICAL REVIEW E , vol. 97, pp. 023109--, DOI : 10.1103/PhysRevE.97.023109, 2018 NOGUEIRA P. A., CAVALIERI A. V. G., JORDAN P. A model problem for sound radiation by an installed jet JOURNAL OF SOUND AND VIBRATION , vol. 391, pp. 95-115, DOI : 10.1016/j.jsv.2016.12.015, 2018 BRES G. A., JORDAN P., JAUNET V., LE RALLIC M., CAVALIERI A. V. G., TOWNE A., LELE S., COLONIUS T., SCHMIDT O. Importance of the nozzle-exit boundary layer state in subsonic turbulent jets JOURNAL OF FLUID MECHANICS , vol. 851, pp. 83-124, DOI : 10.1017/jfm.2018.476, 2018 PHILLIPS S., AGARWAL A., JORDAN P. The sound produced by a dripping tap is driven by resonant oscillations of an entrapped air bubble SCIENTIFIC REPORTS, vol. 8, pp. 1-12, DOI : 10.1038/s41598-018-27913-0, 2018 SICOT C., DELIANCOURT F., BOREE J., AGUINAGA S., BOUCHET J. Representativeness of geometrical details during wind tunnel tests. Application to train aerodynamics in crosswind conditions JOURNAL OF WIND ENGINEERING AND INDUSTRIAL APPLICATIONS, vol. 177, pp. 186-196, DOI : 10.1016/j.jweia.2018.01.040, 2018 CECERE A., DE CRISTOFARO D., SAVINO R., AYEL V., SOLE-AGOSTINELLI T., MARENGO M., ROMESTANT C., BERTIN Y. Experimental analysis of a Flat Plate Pulsating Heat Pipe with Self-ReWetting Fluids during a parabolic flight campaign ACTA ASTRONAUTICA, vol. 147, pp. 454-461, DOI : 10.1016/j.actaastro.2018.03.045, 2018 SALAMA A., RICHARD G., MEDLES K., ZEGHLOUL T., DASCALESCU L. Distinct recovery of copper and aluminum from waste electric wires using a roll-type electrostatic separator WASTE MANAGEMENT, vol. 76, pp. 207-216, DOI : 10.1016/j.wasman.2018.03.036, 2018 SIGNOR L., KUMAR P., TRESSOU B., NADOT-MARTIN C., ORDONEZ-MIRANDA J., CARR J., JOULAIN K., MILHET X. Evolution of the Thermal Conductivity of Sintered Silver Joints with their Porosity Predicted by the Finite Element Analysis of Real 3D Microstructures JOURNAL OF ELECTRONIC MATERIALS, vol. 47, pp. 4170-4176, DOI : 10.1007/s11664-018-6253-2, 2018

GIGLIOTTI M., PANNIER Y., GONZALEZ R. A., LAFARIE-FRENOT M. C., LOMOV S. V. X-ray micro-computed-tomography characterization of cracks induced by thermal cycling in non-crimp 3D orthogonal woven composite materials with porosity COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, vol. 112, pp. 100-110, DOI : 10.1016/j.compositesa.2018.05.020, 2018 BERINGHIER M., DJATO A., MAIDA D., GIGLIOTTI M. A novel protocol for rapid identification of anisotropic diffusion properties of polymer matrix composite materials with complex texture COMPOSITE STRUCTURES, vol. 201, pp. 1088-1096, DOI : 10.1016/j.compstruct.2018.05.142, 2018 FOTI F., GIGLIOTTI M., PANNIER Y., MELLIER D., LAFARIE-FRENOT M. C. The Effect of the Environment on High Temperature Fatigue of Cross-Ply C/Epoxy Laminated Composites, Composite Structures COMPOSITE STRUCTURES, vol. 202, pp. 924-934, DOI : 10.1016/j.compstruct.2018.04.065, 2018 AMADOU N., DE RESSEGUIER T., DRAGON A., BAMBRINK E. Coupling between plasticity and phase transition in shock and ramp-compressed single crystal iron PHYSICAL REVIEW B, vol. 98, pp. 024104--, DOI : 10.1103/PhysRevB.98.024104, 2018 DE RESSEGUIER T., PRUDHOMME G., ROLAND C., BAMBRINK E., LOISON D., JODAR B., LESCOUTE E., SOLLIER A. Picosecond x-ray radiography of microjets expanding from laser shock-loaded grooves JOURNAL OF APPLIED PHYSICS, vol. 124, pp. 065106--, DOI : 10.1063/1.5040304, 2018 MALINOWSKI P., OSTACHOWICZ W., TOUCHARD F., BOUSTIE M., CHOCINSKI-ARNAULT L., GONZALEZ P., BERTHE L., DE VASCONCELLOS D., SORRENTINO L. Study of plant fibre composites with damage induced by laser and mechanical impacts COMPOSITES PART B, vol. 152, pp. 209-219, DOI : 10.1016/j.compositesb.2018.07.004, 2018 SEGHINI M. C., TOUCHARD F., SARASINI F., CHOCINSKI-ARNAULT L., MELLIER D., TIRILLO J. Interfacial adhesion assessment in flax/epoxy and in flax/vinylester composites by single yarn fragmentation test: Correlation with micro-CT analysis COMPOSITES PART B, vol. 113, pp. 66-75, DOI : 10.1016/j.compositesa.2018.07.015, 2018 MOURZENKO V., THOVERT J.-F. Conductivity and Transmissivity of a Single Fracture TRANSPORT IN POROUS MEDIA, vol. 123, pp. 235-256, DOI : 10.1007/s11242-018-1037-y, 2018 PRADEL P., MALAISE F., DE RESSEGUIER T., DELHOMME C., LE BLANC G., QUESSADA J. H. Dynamic compaction of polyurethane foam: experiments and modelling EUROPEAN PHYSICAL JOURNAL SPECIAL TOPICS, vol. 227, pp. 3-16, DOI : 10.1140/epjst/e2018-00116-7, 2018 BABONNEAU D., DIOP D. K., SIMONOT L., LAMONGIE B., BLANC N., BOUDET N., VOCANSON F., DESTOUCHES N. Real-time investigations of structural and optical changes in photochromic Ag/TiO2 nanocomposite thin films under laser irradiation NANO FUTURES, vol. 2, pp. 015002--, DOI : 10.1088/2399-1984/aaa665, 2018 PRIKHNA T. A., OSTASH O., SVERDUN V., KARPETS M. V., ZIMYCH T., IVASYSHYN A., CABIOCH T., CHARTIER P., DUB S. N., JAVORSKA L., PODGURSKA V., FIGEL P., CYBORON J., MOSHCHIL V., KOVY LAEV V., PONOMARYOV S., ROMAKA V., SERBENYUK T., STAROSTINA A. V. Presence of oxygen in Ti-Al-C MAX phases-based materials and their stability in oxidizing environment at elevated temperatures ACTA PHYSICA POLONICA, vol. 133, pp. 789-793, DOI : 10.12693/APhysPolA.133.789, 2018 LACROIX B., GABORIAUD R. J., PAUMIER F.

Fundamental aspects about the first steps of irradiation-induced phase transformations in fluorite-related oxides ACTA MATERIALIA, vol. 153, pp. 303-313, DOI : 10.1016/j.actamat.2018.04.058, 2018 PATSALAS P., KALFAGIANNIS N., KASSAVETIS S., ABADIAS G., BELLAS D. V., LEKKA C., LIDORIKIS E. Conductive nitrides: Growth principles, optical and electronic properties, and their perspectives in photonics and plasmonics MATERIALS SCIENCE AND ENGINEERING: R: REPORTS, vol. 123, pp. 1-55, DOI : 10.1016/j.mser.2017.11.001, 2018 OLBINADO M. P., GRENZER J., PRADEL P., DE RESSEGUIER T., VAGOVIC P., ZDORA M.-C., GUZENKO V., DAVID C., RACK A. Advances in indirect detector systems for ultra high-speed hard X-ray imaging with synchrotron light JOURNAL OF INSTRUMENTATION, vol. 13, pp. c04004--, DOI : 10.1088/1748-0221/13/04/C04004, 2018 BODJONA S. H., GIRAULT M., VIDECOQ E., BERTIN Y. Reduced order model of a two-phase loop thermosyphon by modal identification method INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , vol. 123, pp. 637-654, DOI : 10.1016/j.ijheatmasstransfer.2018.02.075 , 2018 GROZA M., NADOT Y., VARADI K. Defect size map for nodular cast iron components with ellipsoidal surface defects based on the defect stress gradient approach INTERNATIONAL JOURNAL OF FATIGUE, vol. 112, pp. 206-215, DOI : 10.1016/j.ijfatigue.2018.03.025, 2018 JIANG . C., DAGAULT L., AUDURIER V., TROMAS C., DECLEMY A., BEAUFORT M. F., BARBOT J. F. Strain buildup in 4H-SiC implanted with noble gases at low dose MATERIALS TODAY-PROCEEDINGS, vol. 5, pp. 14722-14731, DOI : 10.1016/j.matpr.2018.03.062, 2018 Kinésithérapie Scientifique, vol. , pp. 1-2, 2018 JAGAILLOUX F., VALLE V. Analysis and comparison of different methods used to extract isoclinic and isochromatic parameters. Application to the determination of the residual stresses inside crystal silicon wafers STRAIN, vol. 54, pp. ---, DOI : 10.1111/str.12275, 2018 AMODEO J., MERKEL S., TROMAS C., CARREZ P., KORTE-KERZEL S., CORDIER P., CHEVALIER J. Dislocations and Plastic Deformation in MgO Crystals: A Review CRYSTALS, vol. 8, pp. ---, DOI : 10.3390/cryst8060240, 2018 RABIER J. On a Plasticity by Partial Dislocations in Silicon at Very High Stress MATERIALS TODAY-PROCEEDINGS, vol. 5, pp. 14705-14711, DOI : 10.1016/j.matpr.2018.03.060, 2018 ANR-12-BS04-0003-01 BROCHARD S., ABED EL NABI F., PIZZAGALLI L., MERABET A., TEXIER M., TROMAS C., GODET J. Atomic scale mechanisms and brittle to ductile transition at low size in silicon MATERIALS TODAY-PROCEEDINGS, vol. 5, pp. 14693-14704, DOI : 10.1016/j.matpr.2018.03.059, 2018 LABEX INTERACTIFS, reference ANR-11-LABX-0017-01 BELAID D., VENDEUVRE T., BOUCHOUCHA A., BREMAND F., BREQUE C., RIGOARD P., GERMANEAU A. Utility of cement injection to stabilize split-depression tibial plateau fracture by minimally invasive methods: A finite element analysis CLINICAL BIOMECHANICS, vol. 56, pp. 27-35, DOI : 10.1016/j.clinbiomech.2018.05.002, 2018

GIACHETTI B., FENOT M., COUTON D., PLOURDE F. Influence of multi-perforation synthetic jet configuration on heat transfer enhancement INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , vol. 125, pp. 262-273, DOI : 10.1016/j.ijheatmasstransfer.2018.04.073, 2018 WU Z., FAN D., ZHOU Y., LI R., NOACK B. R. Jet mixing optimization using machine learning control EXPERIMENTS IN FLUIDS , vol. 59, pp. 131--, DOI : 10.1007/s00348-018-2582-4, 2018 MOSTEFA K., SOUCHET D., ZEBBAR D., YOUCEFI A. Effects of the dimple geometry on the isothermal performance of a hydrodynamic textured tilting-pad thrust bearing INTERNATIONAL JOURNAL OF HEAT AND TECHNOLOGY, vol. 36, pp. 463-472, DOI : 10.18280/ijht.360211, 2018 CORMIER J., RAE C. M. F., NEUMEIER S., HARDY M. C., REED R. C. Superalloys and Their Applications Foreword METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol. 49a, pp. 3763-3763, DOI : 10.1007/s11661-018-4803-0, 2018 ROTELLA A., NADOT Y., PIELLARD M., AUGUSTIN R., FLEURIOT M. Fatigue limit of a cast Al-Si-Mg alloy (A357-T6) with natural casting shrinkages using ASTM standard X-ray inspection INTERNATIONAL JOURNAL OF FATIGUE, vol. 114, pp. 177-188, DOI : 10.1016/j.ijfatigue.2018.05.026, 2018 "Investissements d'Avenir" (EQUIPEX GAP) [ANR-11-EQPX-0018] TRAORE P., WU J., LOUSTE C., OLIVENCIA F. D., VAZQUEZ P., PEREZ A. T. Numerical investigation of electroconvection induced by strong unipolar injection between two rotating coaxial cylinders JOURNAL OF ELECTROSTATICS, vol. 94, pp. 60-66, DOI : 10.1016/j.elstat.2018.06.003, 2018 program Investissements d'Avenir (Labex Interactifs, Reference ANR-11-LABEX-0017-01) HU S., BRUNETIERE N., HUANG W. ., SHI X., PENG Z., LIU X., WANG Y. A closed-form contact model for gas face seals during the opened operation INDUSTRIAL LUBRICATION AND TRIBOLOGY, vol. 70, pp. 1110-1118, DOI : 10.1108/ILT-07-2017-0208, 2018 MILHET X., NAIT-ALI A., TANDIANG D., LIU Y. J., VAN CAMPEN D., CACCURI V., LEGROS M. Evolution of the nanoporous microstructure of sintered Ag at high temperature using in-situ X-ray nanotomography ACTA MATERIALIA, vol. 156, pp. 310-317, DOI : 10.1016/j.actamat.2018.06.047, 2018 SCHRÖDERS S., SANDLÖBES S., BIRKE C., LOECK M., PETERS L., TROMAS C., KORTE-KERZEL S. Room temperature deformation in the Fe7Mo6 mu-Phase INTERNATIONAL JOURNAL OF PLASTICITY, vol. 108, pp. 125-143, DOI : 10.1016/j.ijplas.2018.05.002, 2018 ORDONEZ-MIRANDA J., EZZAHRI Y., JOULAIN K., DREVILLON J., ALVARADO-GIL J. J. Modeling of the electrical conductivity, thermal conductivity, and specific heat capacity of VO2 PHYSICAL REVIEW B, vol. 98, pp. 075144--, DOI : 10.1103/PhysRevB.98.075144, 2018 JORDAN P., JAUNET V., TOWNE A., CAVALIERI A. V. G., COLONIUS T., SCHMIDT O., AGARWAL A. Jet-flap interaction tones JOURNAL OF FLUID MECHANICS , vol. 853, pp. 333-358, DOI : 10.1017/jfm.2018.566, 2018

HEMERY S., VILLECHAISE P. Investigation of Size Effects in Slip Strength of Titanium Alloys: alpha Nodule Size Dependence of the Critical Resolved Shear Stress METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol. 49, pp. 4394-4397, DOI : 10.1007/s11661-018-4678-0, 2018 BERCHET A., SIMON B., BEAUDOIN A., LUBIN P., ROUSSEAUX G., HUBERSON S. Flow fields and particle trajectories beneath a tidal bore: A numerical study INTERNATIONAL JOURNAL OF SEDIMENT RESEARCH, vol. 33, pp. 351-370, DOI : 10.1016/j.ijsrc.2018.03.001, 2018 Agence Nationale de la Recherche (Projet MASCARET 10-BLAN-0911-01) PEPIN J., LAINE E., GRANDIDIER J., CASTAGNET S., BLANC-VANNET P., PAPIN P., WEBER M. Determination of key parameters responsible for polymeric liner collapse in hyperbaric type IV hydrogen storage vessels INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, vol. 43, pp. 16386-16399, DOI : 10.1016/j.ijhydene.2018.06.177, 2018 French Research National Agency (ANR) through the "Matériaux et procédés pour des produits performants (MATETPRO)" program (project COLLINE, No. ANR-13-RMNP-0007) and was partially funded by the French Government program "Investissements d'Avenir" (EQUIPEX GAP, reference ANR-11-EQPX-0018). UEDA M., SILVA C., DE SOUZA G. B., MARIANO S., PICHON L. Overcoming sheaths overlapping in a small diameter metallic tube with one end closed and using a high density plasma from a high power pulsed hollow cathode discharge AIP ADVANCES, vol. 8, pp. 085103-1-085103-13, DOI : 10.1063/1.5040588, 2018 SAGNARD M., BERTHE L., ECAULT R., TOUCHARD F., BOUSTIE M., BRUNE K. Development of the Symmetrical Laser Shock Test for Weak Bond Inspection AIP CONFERENCE PROCEEDINGS, vol. 1979, pp. 070030-1-070030-6, DOI : 10.1063/1.5044839, 2018 LANDOLSI M., LABIADH L., ZARROUK F., MAAREF K., GHANNOUCHI S., TABKA Z., LACOUTURE P. Kinematic analysis of the shot-put: A method of assessing the mechanical work of the hand action force EUROPEAN JOURNAL OF SPORT SCIENCE, vol. 18, pp. 1208-1216, DOI : 10.1080/17461391.2018.1478449, 2018 LAVOGIEZ C., HEMERY S., VILLECHAISE P. Concurrent operation of ?c?+?a? slip and twinning under cyclic loading of Ti-6Al-4V SCRIPTA MATERIALIA, vol. 157, pp. 30-33, DOI : 10.1016/j.scriptamat.2018.07.033, 2018 HASSEN W., ELKHAZEN M. I., TRAORE P., NACEUR BORJINI M. Charge injection in horizontal eccentric annuli filled with a dielectric liquid EUROPEAN JOURNAL OF MECHANICS - B/FLUIDS, vol. 72, pp. 691-700, DOI : 10.1016/j.euromechflu.2018.08.009, 2018 HEDAN S., VALLE V., CABRERA J., COSENZA P. A new approach to quantify the anisotropy of hydromechanical strains in clay-rock at the gallery scale INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, vol. 111, pp. 45-53, DOI : 10.1016/j.ijrmms.2018.07.004, 2018 RIAHI H., MELDI M., FAVIER J., SERRE E., GONCALVES E. A pressure-corrected Immersed Boundary Method for the numerical simulation of compressible flows JOURNAL OF COMPUTATIONAL PHYSICS, vol. 374, pp. 361-383, DOI : 10.1016/j.jcp.2018.07.033, 2018

POPA G., DASCALESCU L. Pulsed-high-voltage-supplied variable cross-section cylindrical electrostatic precipitators for fly-ash particles PARTICULATE SCIENCE AND TECHNOLOGY , vol. 36, pp. 1029-1036, DOI : 10.1080/02726351.2017.1340377, 2018 TEODORESCU H. N., PRAWATYA Y., ZEGHLOUL T., DASCALESCU L. Signal Processing and Error Reduction for Reciprocating Triboelectrometry PROCEEDINGS OF THE ROMANIAN ACADEMY SERIES A-MATHEMATICS PHYSICS TECHNICAL SCIENCES INFORMATION SCIENCE, vol. 19, pp. 509-518, 2018 JOLLY P., ARGHIR M., BONNEAU O., HASSINI M. A. Experimental and Theoretical Rotordynamic Coefficients of Smooth and Round-Hole Pattern Water-Fed Annular Seals JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, vol. 140, pp. 112501--, DOI : 10.1115/1.4040177, 2018 BRUNETIERE N., FRANCISCO A. Multiscale Modeling Applied to the Hydrodynamic Lubrication of Rough Surfaces for Computation Time Reduction LUBRICANTS, vol. 6, pp. 83--, DOI : 10.3390/lubricants6030083, 2018 BENSELAMA A. M., VOIRAND A., BERTIN Y. Electric and capillary instability of liquid rising between heated/cooled parallel plates and subjected to phase change: DC on perfect dielectric liquids COLLOIDS AND SURFACES A : PHYSICOCHEMICAL AND ENGINEERING ASPECTS, vol. 555, pp. 167-176, DOI : 10.1016/j.colsurfa.2018.08.003, 2018 ANR-14-CE05-0031 GRAZIANI A., KERHERVE F., MARTINUZZI R. J., KEIRSBULCK L. Dynamics of the recirculating areas of a forward-facing step EXPERIMENTS IN FLUIDS , vol. 59, pp. ---, DOI : 10.1007/s00348-018-2608-y, 2018 MANCINELLI M., CAMUSSI R. Acceleration and wall pressure fluctuations generated by an incompressible jet in installed configuration COMPTES RENDUS MECANIQUE, vol. 346, pp. 919-931, DOI : 10.1016/j.crme.2018.07.008, 2018 MARGNAT F., IOANNOU V., LAIZET S. A diagnostic tool for jet noise using a line-source approach and implicit large-eddy simulation data COMPTES RENDUS MECANIQUE, vol. 346, pp. 903-918, DOI : 10.1016/j.crme.2018.07.007, 2018 CACCURI V., DESMORAT R., CORMIER J. Tensorial nature of "gamma '" -rafting evolution in nickel-based single crystal superalloys ACTA MATERIALIA, vol. 158, pp. 138-154, DOI : 10.1016/j.actamat.2018.07.033 , 2018 PICHON L., DUBOIS J. B., CHOLLET S., LAREK F., CORMIER J., TEMPLIER C. Low temperature nitriding behaviour of Ni3Al-like ?? precipitates in nickel-based superalloys JOURNAL OF ALLOYS AND COMPOUNDS, vol. 771, pp. 176-186, DOI : 10.1016/j.jallcom.2018.08.187, 2018 AUDIBERT C., ANDREANI A.-S., LAINE E., GRANDIDIER J. Discrete modelling of low-velocity impact on Nomex® honeycomb sandwich structures with CFRP skins COMPOSITE STRUCTURES, vol. 207, pp. 108-118, DOI : 10.1016/j.compstruct.2018.09.047, 2018 (EQUIPEX GAP, reference ANR-11-EQPX-0018)

NAIT-ALI A. Stochastic homogenization of reinforced polymer with very small carbon inclusions COMPTES RENDUS MECANIQUE, vol. 346, pp. 1192-1198, DOI : 10.1016/j.crme.2018.09.002, 2018 MERABET A., TEXIER M., TROMAS C., BROCHARD S., PIZZAGALLI L., THILLY L., RABIER J., TALNEAU A., LE VAILLANT Y.-M., THOMAS O., GODET J. Low-temperature intrinsic plasticity in silicon at small scales ACTA MATERIALIA, vol. 161, pp. 54-60, DOI : 10.1016/j.actamat.2018.09.025, 2018 DAL CERO COELHO F., VU Q. H., HALM D., NADOT Y. Fatigue life modelling under variable amplitude multiaxial loading: Comparison between fatigue criterion and incremental modelling INTERNATIONAL JOURNAL OF FATIGUE, vol. 117, pp. 461-470, DOI : 10.1016/j.ijfatigue.2018.08.013, 2018 AUMAND M., AMIARD G., HE R., REN Z.-F., WHITE K.-W., THILLY L. Multi-scale study of the deformation mechanisms of thermoelectric p-type half-Heusler Hf0.44Zr0.44Ti0.12CoSb0.8Sn0.2 JOURNAL OF APPLIED PHYSICS, vol. 124, pp. 175104--, DOI : 10.1063/1.5045591, 2018 JOSEPH A., GAUTHIER-BRUNET V., JOULAIN A., BONNEVILLE J., DUBOIS S., MONCHOUX J. P., PAILLOUX F. Mechanical properties of Al/omega-Al-Cu-Fe composites synthesized by the SPS technique MATERIALS CHARACTERIZATION , vol. 145, pp. 644-652, DOI : 10.1016/j.matchar.2018.09.025 , 2018 VULLIEZ M., ZEGHLOUL S., KHATIB O. Design strategy and issues of the Delthaptic, a new 6-DOF parallel haptic device MECHANISM AND MACHINE THEORY, vol. 128, pp. 395-411, DOI : 10.1016/j.mechmachtheory.2018.06.015, 2018 LIN Y., LAFARIE-FRENOT M. C., BAI J., GIGLIOTTI M. Numerical simulation of the thermoelectric behavior of CNTs/CFRP aircraft composite laminates ADVANCES IN AIRCRAFT & SPACECRAFT SCIENCE, vol. 5, pp. 633-652, DOI : 10.12989/aas.2018.5.6.633, 2018 SASAKI K., TISSOT G., CAVALIERI A. V. G., SILVERSTRE F. J., JORDAN P., BIAU D. Closed-loop control of a free shear flow: a framework using the parabolized stability equations THEORETICAL AND COMPUTATIONAL FLUID DYNAMICS , vol. 32, pp. 765-788, DOI : 10.1007/s00162-018-0477-x, 2018 DEVILLE L., ARGHIR M. Experimental Analysis of Small Diameter Brush Seals and Comparisons With Theoretical Predictions JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME , vol. 141, pp. 012201 --, DOI : 10.1115/1.4040596, 2018 AL TAKASH A., BERINGHIER M., HAMMOUD M., GRANDIDIER J. Numerical approach based on the collection of the most significant modes to solve cyclic transient thermal problems involving different time scales JOURNAL OF COMPUTATIONAL PHYSICS, vol. 375, pp. 950-959, DOI : 10.1016/j.jcp.2018.08.059, 2018 BUNLON F., GAZEAU J. P., COLLOUD F., MARSHALL P.-J., BOUQUET C. A. Joint action with a virtual robotic vs. human agent COGNITIVE SYSTEMS RESEARCH, vol. 52, pp. 816-827, DOI : 10.1016/j.cogsys.2018.09.017, 2018

TURESON N., MARTEAU M., CABIOCH T., NONG N. V., JENSEN J., LU J., GRECZYNSKI G., FOURNIER D., SINGH N., SONI A., BELLIARD L., EKLUND P., LE FEBVRIER A. Effect of ion-implantation-induced defects and Mg dopants on the thermoelectric properties of ScN PHYSICAL REVIEW B, vol. 98, pp. 205307--, DOI : 10.1103/PhysRevB.98.205307, 2018 RAMIREZ-RINCON J. A., GOMEZ-HEREDIA C. L., CORVISIER A., ORDONEZ-MIRANDA J., GIRARDEAU T., PAUMIER F., CHAMPEAUX C., DUMAS-BOUCHIAT F., EZZAHRI Y., JOULAIN K., ARES O., ALVARADO-GIL J. J. Thermal hysteresis measurement of the VO2 dielectric function for its metal-insulator transition by visible-IR ellipsometry JOURNAL OF APPLIED PHYSICS, vol. 124, pp. 195102 --, DOI : 10.1063/1.5049747, 2018 POEUF S., GENETIER M., LEFRANCOIS A., OSMONT A., BAUDIN G., CHINNAYYA A. Investigation of JWL Equation of State for Detonation Products at Low Pressure With Radio Interferometry PROPELLANTS, EXPLOSIVES,PYROTECHNICS, vol. 43, pp. 1157-1163, DOI : 10.1002/prep.201800099, 2018 VENDEUVRE T., GRUNBERG M., GERMANEAU A., MALOUBIER F., FAURE J.-P., GAYET L. E., RIGOARD P., BREQUE C. Contribution of minimally invasive bone augmentation to primary stabilization of the osteosynthesis of Schatzker type II tibial plateau fractures: Balloon vs bone tamp CLINICAL BIOMECHANICS, vol. 59, pp. 27-33, DOI : 10.1016/j.clinbiomech.2018.08.004, 2018 BOUAOUINA B., MASTAIL C., BESNARD A., MAREUS R., NITA F., MICHEL A., ABADIAS G. Nanocolumnar TiN thin film growth by oblique angle sputter-deposition: Experiments vs. simulations MATERIALS & DESIGN, vol. 160, pp. 338-349, DOI : 10.1016/j.matdes.2018.09.023, 2018 ZHAO S., ER-RAIY A., BOUALI Z., MURA A. Dynamics and kinematics of the reactive scalar gradient in weakly turbulent premixed flames COMBUSTION AND FLAME, vol. 198, pp. 436-454, DOI : 10.1016/j.combustflame.2018.10.002, 2018 BOUYER J., FILLON M., HELENE M., BEAURAIN J., GIRAUDEAU C. Behavior of a Two-Lobe Journal Bearing With a Scratched Shaft: Comparison Between Theory and Experiment JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME , vol. 141, pp. 021702--, DOI : 10.1115/1.4041363, 2018 LI R., NOACK B. R., CORDIER L., BOREE J., KAISER E., HARAMBAT F. Linear genetic programming control for strongly nonlinear dynamics with frequency crosstalk ARCHIVES OF MECHANICS, vol. 70, pp. 505-534, DOI : 10.24423/aom.3000, 2018 PHILIPPS S., AGARWAL A., JORDAN P. The annoying dripping tap PHYSICS TODAY, vol. 71, pp. 70-71, DOI : 10.1063/PT.3.4100, 2018 HERVE A., DREVILLON J., EZZAHRI Y., JOULAIN K. Radiative cooling by tailoring surfaces with microstructures: Association of a grating and a multi-layer structure JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER, vol. 221, pp. 155-163, DOI : 10.1016/j.jqsrt.2018.09.015, 2018 SU H., SANDOVAL J., VIEYRES P., POISSON G., FERRIGNO G., DE MOMI H. Safety-enhanced Collaborative Framework for Tele-operated Minimally Invasive Surgery Using a 7-DoF Torque-controlled Robot INTERNATIONAL JOURNAL OF CONTROL AUTOMATION AND SYSTEMS, vol. 16, pp. 2915-2923, DOI : 10.1007/s12555-017-0486-3, 2018

ALAILI K., ORDONEZ-MIRANDA J., EZZAHRI Y. Modulated heat conduction in a two-layer dielectric system with dynamical interface thermal resistance JOURNAL OF APPLIED PHYSICS, vol. 124, pp. ---, DOI : 10.1063/1.5058747, 2018 CORMIER J. Ni- and Co-Based Superalloys and their Coatings METALS, vol. 8, pp. ---, DOI : 10.3390/met8121055, 2018 ZHANG S. L., HASSINI M. A., ARGHIR M. Accuracy and Grid Convergence of the Numerical Solution of the Energy Equation in Fluid Film Lubrication: Application to the 1D Slider LUBRICANTS, vol. 6, pp. ---, DOI : 10.3390/lubricants6040095, 2018 QUINTENS H., ZITOUN R., STROZZI C., BELLENOUE M. Deflagration/auto-ignition/detonation transition induced by flame propagation in a n-decane/O2/Ar mixture FLOW TURBULENCE AND COMBUSTION, vol. -, pp. 1-21, DOI : 10.1007/s10494-018-9980-9, 2018 ADJEMOUT M., BRUNETIERE N., BOUYER J. Friction and Temperature Reduction in a Mechanical Face Seal by a Surface Texturing: Comparison between TEHD Simulations and Experiments TRIBOLOGY TRANSACTIONS , vol. 61, pp. ---, DOI : 10.1080/10402004.2018.1478053, 2018 ROUILLON M., BRUNETIERE N. Spiral Groove Face Seal Behavior and Performance in Liquid Lubricated Applications TRIBOLOGY TRANSACTIONS , vol. 61, pp. 1048-1056, DOI : 10.1080/10402004.2018.1463426, 2018 MELDI M., DJENIDI L., ANTONIA R. Reynolds number effect on the velocity derivative flatness factor JOURNAL OF FLUID MECHANICS , vol. 856, pp. 426-442, DOI : 10.107/jfm.2018.717, 2018 MELDI M. Augmented Prediction of Turbulent Flows via Sequential Estimators: Sensitivity of State Estimation to Density of Time Sampling for Available Observation FLOW TURBULENCE AND COMBUSTION, vol. 101, pp. 389-412, DOI : 10.1007/s10494-018-9967-6, 2018 BERNARDINA G. R. D., MONNET T., PINTO H. T., DE BARROS R. M. L., CERVERI P., SILVATTI A. P. Are Action Sport Cameras Accurate Enough for 3D Motion Analysis? A Comparison With a Commercial Motion Capture System JOURNAL OF APPLIED BIOMECHANICS , vol. 35, pp. 80-86, DOI : 10.1123/jab.2017-0101, 2018 EDGINGTON-MITCHELL D., JAUNET V., JORDAN P., TOWNE A., SORIA J., HONNERY D. R. Upstream-travelling acoustic jet modes as a closure mechanism for screech JOURNAL OF FLUID MECHANICS , vol. 855, pp. r1-1-r1-12, DOI : 10.1017/jfm.2018.642, 2018 DIALLO L., FNIDIKI A., LECHEVALLIER L., ZAREFY A., JURASZEK J., CUVILLY F., BLUM I., VIRET M., MARTEAU M., EYIDI D., DECLEMY A. 6H-SiC-Fe Nanostructures Studied by Atom Probe Tomography IEEE MAGNETICS SOCIETY, vol. 9, pp. ---, DOI : 10.1109/LMAG.2018.2829109, 2018 CASTAGNET S., MELLIER D., NAIT-ALI A., BENOIT G. In-situ X-ray computed tomography of decompression failure in a rubber exposed to high-pressure gas POLYMER TESTING, vol. 70, pp. 255-262, DOI : 10.1016/j.polymertesting.2018.07.017, 2018

BERNELLI-ZAZZERA F., MARTIN-PRATS M.-A., MARULO F., HANUS D., MELKERT J., GUGLIERI G., BAUER P., PANTELAKI I., WASSER I., DECONINCK H., BOSILCA R., SAARI H.-K. Proposal for a EU quality label for aerospace education INCAS Bulletin (publication of the National Institute for Aerospace Research ''Elie Carafoli'', Bucharest, Romania, vol. 10, pp. 5-16, DOI : 10.13111/2066-8201.2018.10.2.2, 2018 BOULAL S., VIDAL P., ZITOUN R., MATSUMOTO T., MATSUO A. Experimental investigation on detonation dynamics through a reactivity sink COMBUSTION AND FLAME, vol. 196, pp. 11-25, DOI : 10.1016/j.combustflame.2018.05.017, 2018 BOURDIN F., STINVILLE J. C., ECHLIN McLEAN P., CALLAHAN P. G., LENTHE W. C., TORBET C., TEXIER D., BRIDIER F., CORMIER J., VILLECHAISE P., POLLOCK T., VALLE V. Measurements of plastic localization by heaviside-digital image correlation ACTA MATERIALIA, vol. 157, pp. 307-325, DOI : 10.1016/j.actamat.2018.07.013, 2018 CLERMONT P. S., PAILLAT T., LEBLANC P. Numerical study on the impact of a temperature step on the electrical double layer. JOURNAL OF ELECTROSTATICS, vol. 95, pp. 13-23, DOI : 10.1016/j.elstat.2018.07.006, 2018 CUI S., GU L., FILLON M., WANG L., ZHANG C. The effects of surface roughness on the transient characteristics of hydrodynamic cylindrical bearings during startup TRIBOLOGY INTERNATIONAL , vol. 128, pp. 421-428, DOI : 10.1016/j.triboint.2018.06.010, 2018 PHAM T., RIBEIRO M., PARK J., LEE N. J., KANG K., PARK E., NGUYEN V., MICHEL A., YOON C., CHO S., KIM T. H. Interface morphology effect on the spin mixing conductance of Pt/Fe3O4 bilayers SCIENTIFIC REPORTS, vol. 8, pp. 13907--, DOI : 10.1038/s41598-018-31915-3, 2018 SANSICA A., ROBINET J.-C., ALIZARD F., GONCALVES E. Three-dimensional instability of a flow past a sphere: Mach evolution of the regular and Hopf bifurcations JOURNAL OF FLUID MECHANICS , vol. 855, pp. 1088-1115, DOI : 10.1017/jfm.2018.664, 2018 DEDONCKER R., DJEMIA P., RADNOCZI G., TETARD F., BELLIARD L., ABADIAS G., MARTIN N., DEPLA D. Reactive sputter deposition of CoCrCuFeNi in nitrogen/argon mixtures JOURNAL OF ALLOYS AND COMPOUNDS, vol. 769, pp. 881-888, DOI : 10.1016/j.jallcom.2018.08.044, 2018 FURGEAUD C., SIMONOT L., MICHEL A., MASTAIL C., ABADIAS G. Impact of Ge alloying on the early growth stages, microstructure and stress evolution of sputter-deposited Cu-Ge thin films ACTA MATERIALIA, vol. 159, pp. 286-295, DOI : 10.1016/j.actamat.2018.08.019, 2018 ORRIERE T., MOREAU E., PAI D. Z. Ionization and recombination in nanosecond repetitively pulsed microplasmas in air at atmospheric pressure JOURNAL OF PHYSICS D-APPLIED PHYSICS, vol. 51, pp. ---, DOI : 10.1088/1361-6463/aae134, 2018 NADJEM A., KACHI M., DASCALESCU L., MEDLES K., ZEGHLOUL T. Influence of the geometrical parameters of a dielectric barrier discharge reactor on the subsequent tribocharging of granular polymers JOURNAL OF ELECTROSTATICS, vol. 95, pp. 24-31, DOI : 10.1016/j.elstat.2018.08.003, 2018 KILYMIS D., GERARD C., AMODEO J., WAGHMARE U., PIZZAGALLI L. Uniaxial compression of silicon nanoparticles: An atomistic study on the shape and size effects ACTA MATERIALIA, vol. 158, pp. 155-166, DOI : 10.1016/j.actamat.2018.07.063, 2018 ROLLAND J. Finite size analysis of a double crossover in transitional wall turbulence

JOURNAL OF STATISTICAL MECHANICS-THEORY AND EXPERIMENT, vol. 2018, pp. ---, DOI : 10.1088/1742-5468/aaddab, 2018 MEKHALEF A., ZEGHLOUL T., AKSA W., MEDLES K., DASCALESCU L. Continuous operation of a fluidized-bed disk-type electrostatic separator for micronized plastic waste WASTE MANAGEMENT, vol. 79, pp. 763-769, DOI : 10.1016/j.wasman.2018.08.044, 2018 HANSMETZGER S., ZITOUN R., VIDAL P. A study of continuous rotation modes of detonation in an annular chamber with constant or increasing section SHOCK WAVES , vol. 28, pp. 1065-1078, DOI : 10.1007/s00193-018-0846-9, 2018 EDDINE A. N., HUARD B., GABANO J.-D., POINOT T., THOMAS A., MARTEMIANOV S. Frequential identification of an electrochemical cell impedance using fractional modeling IFAC PAPERS ON LINE, vol. 51, pp. 802-807, DOI : 10.1016/j.ifacol.2018.09.132, 2018 EDDINE A. N., HUARD B., GABANO J.-D., POINOT T., THOMAS A., MARTEMIANOV S. Time domain diffusion parameters identification of electrochemical impedance models using fractional order system IFAC PAPERS ON LINE, vol. 51, pp. 377-382, DOI : 10.1016/j.ifacol.2018.09.174, 2018

INV : Conférences invitées : BOREE J. Bluff Bodies as a Potential Open Challenge Problem for Active Flow Control. AIAA Flow Control Meeting AIAA Flow Control Conference; Applications and Impacts Discussion Group, 2018 MAUCHAMP V., MAGNE D., GARNERO C., BILYK T., CHARTIER P., CELERIER S., CABIOCH T., PACAUD J. MXene surface functionalization characterized on the nanometer scale using EELS in the TEM 14th International Ceramics Congress (CIMTEC 2018), 2018 MAUCHAMP V., MAGNE D., NECHICHE M., CHARTIER P., GAUTHIER-BRUNET V., CELERIER S., DUBOIS S., CABIOCH T. Probing the local atomic structure in MAX phases and MXenes using EELS and DFT simulations : from solid solution effects to surface functionalization 42nd International Conference and Expo on Advanced Ceramics and Composites, (ICACC 2018), 2018 CABIOCH T., MAGNE D., MAUCHAMP V., NICOLAÃ J., BEAUFORT M. F. MAX phases thin films by thermal annealing techniques 14th International Ceramics Congress (CIMTEC 2018), 2018 PAUMIER F., MAUDET F., LACROIX B., SANTOS A. J., DUPEYRAT C., HURAND S., PARAILLOUS M., CORVISIER A., GARCIA F., MORALES F. M., GIRARDEAU T. Nanostructured thin films deposited by Oblique Angle Deposition for optronic applications: Influence of the nanostructuration on the optical properties and electrical conductivity mechanisms GDR CNRS 3660 Oxydes fonctionnels : du matériau Au dispositif OXYFUN COLLOQUE NATIONAL, 2018 BELLENOUE M., BOUST B. Combustion of green liquid storable bi-propellants at PPRIME Institute Greener and Safer Energetic and Balistic Systems, 2018

MICHALSKI Q., BOUST B., BELLENOUE M. Influence of operating conditions and residual burned gas properties on cyclic operation of constant-volume combustion Active Flow and Combustion Control, 2018 BELLENOUE M., BOUST B., GUELOU Y. Ariane d'aujourd'hui et de demain : l'innovation en propulsion au service de l'espace ! NOVAQ 2018 (Innovation en Nouvelle Aquitaine), 2018 ROBIC B., BELLENOUE M. Constant Volume Combustion and Detonation potential for aviation propulsion and retrospective of work performed at ISAE-ENSMA Turbomachinery Technical Conference, TURBO EXPO (ASME), 2018

ACTI : Congrès internationaux avec actes : LI R., BOREE J., NOACK B. R., CORDIER L., HARAMBAT F. Drag reduction of a yawed car model by combining fluidic flaps and turbulence control 19th International Symposium on the Application of Laser and Imaging Techniques to Fluid Mechanics, 2018 SHINKO T., HENAFF G., HALM D., BENOIT G. Influence of gaseous hydrogen on plastic strain in vicinity of fatigue crack tip in Armco pure iron 12th International Fatigue Congress (FATIGUE 2018), 2018 ARNAUD E., HALM D., BERTHEAU D., BEAUDET J. Ablation performances of carbon composite based on diferent resins under severe aero-thermal flux 18th European Conference on Composite Materials (ECCM 18), 2018 BENELFELLAH A., HALM D., ROGAUME T., BERTHEAU D., GRATTON M. Modelling of Thermochemical Behaviour of a Wound Carbon/Epoxy Composite Exposed to Fire 18th European Conference on Composite Materials (ECCM 18), 2018 BIZET L., SAFFRE P., MATHIS K., HALM D., GUEGUEN M., FRANCESCATO P. Design of Composite Filament Wound Pressure Vessels : Management of Singularities in Multi-Sequence Dome Lay-Up Simulations 18th European Conference on Composite Materials (ECCM 18), 2018 MERCADE C., HALM D., ROGAUME T. Thermomechanical Damage Models for Type IV Hydrogen Vessels Subjected to Fire 18th European Conference on Composite Materials (ECCM 18), 2018 BIZET L., MATHIS K., SAFFRE P., HALM D., GUEGUEN M., FRANCESCATO P., JACQUESSON M. A Comprehensive Tool to Simulate Composite Lay-Ups in Pressure Vessels European Conference on Spacecraft Structures Materials and Environmental Testing,(ECSSMET 2018), 2018 SANFOURCHE C., CASTAGNET S., GORGE A., GRANDIDIER J., FUJIWARA H., ONO H., NISHIMURA S. Relationships between gas diffusion and mechanical loading in a polyethylene exposed to high-pressure hydrogen 17th International Conference on « Deformation, Yield and Fracture of Polymers » (DYFP 2018), 2018 SMERDOVA O., GOSSARD C., NADOT Y., CASTAGNET S., RIDOSZ L. Relation between microstructure and mechanical resistance of SLS manufactured PA12 polymer 17th International Conference on « Deformation, Yield and Fracture of Polymers » (DYFP 2018), 2018

LARIBI M. A., CARBONE D., ZEGHLOUL S. Optimal Design of Cable Driven Robot for Rehabilitation with Prescribed Workspace 6th International Workshop on New Trends in Medical and Service Robotics, 2018 LARIBI M. A., DECATOIRE A., CARBONE G., PISTA D., ZEGHLOUL S. Identification of Upper Limb Motion Specifications via Visual Tracking for Robot Assisted Exercising 27th International Conference on Robotics in Alpe-Adria-Danube Region (RAAD 2018), 2018 AYOUBI Y., LARIBI M. A., ZEGHLOUL S., ARSICAULT M. New Variable Stiffness Safety Oriented Mechanism for Cobots' Rotary Joints 27th International Conference on Robotics in Alpe-Adria-Danube Region (RAAD 2018), 2018 SANDOVAL J., LARIBI M. A., ZEGHLOUL S., ARSICAULT M., POISSON G. Safety performance of a variable stiffness actuator for collaborative robots 27th International Conference on Robotics in Alpe-Adria-Danube Region (RAAD 2018), 2018 HAMIDA I. B., LARIBI M. A., MLIKA A., ROMDHANE L., ZEGHLOUL S. Geometric Based Approach for Workspace Analysis of Translational Parallel Robots 22nd CISM IFToMM Symposium, 2018 SALVETTI M. V., MELDI M., BRUNO L., SAGAUT P. Reliability of large-eddy simulations: Benchmarking and uncertainty quantification 13th ERCOFTAC SIG 33 Workshop, Progress in Flow Instability, Transition and Control, 2018 LAMBERT M. A., MAURY R., STRZELECKI A., VALIERE J. C., FOUCAULT E., LEHNASCH G., MICKAN B., VON LAVANTTE E. Numerical and Experimental Investigations on the Shape and Roughness of Cylindrical Critical Flow Venturi Nozzle (CFVN) 10th International Symposium on Fluid Flow Measurements, 2018 HAFFNER Y., BOREE J., SPOHN A., CASTELAIN T., MICHARD M., SESMAT S., BIDEAUX E. Forcing the three-dimensional large-scale wake asymmetries past a square-back blunt body : wake equilibrium and drag reduction 3rd international conference in numerical and experimental aerodynamics of road vehicles and trains (Aerovehicles 3), 2018 LI R., BOREE J., NOACK B. R., CORDIER L., HARAMBAT F. Drag reduction of a yawed car model by combining fluidic flaps and turbulence control 3rd international conference in numerical and experimental aerodynamics of road vehicles and trains (Aerovehicles 3), 2018 SICOT C., PAILLE F., BARROS D., BOREE J. Unsteady load measurements: analysis of 2D and 3D cylinder wakes 7th Conference on Bluff Body Wakes and Vortex Induced Vibrations,(BBVIV), 2018 WANG Y., SICOT C., GRANDEMANGE M., BOREE J. Experimental study of wheel-vehicle aerodynamic interactions 3rd international conference in numerical and experimental aerodynamics of road vehicles and trains (Aerovehicles 3), 2018 QUINTENS H., BELLENOUE M., STROZZI C., ZITOUN R. Influence of initial thermodynamic conditions on auto-ignition front velocity and transition to detonation for a n-decane -- O2 - Ar mixture 11th International Colloquium On Pulsed and Continuous Detonation (ICPCD 2018), 2018

RIAUD N., BOUST B., BELLENOUE M. Experimental comparison of the combustion of storable bipropellant alkanes with HTP oxidizer from impinging jet injectors 11th International Symposium on Special Topics in Chemical Propulsion (11-ISICP), 2018 BEN HOUIDI M., SOTTON J., BELLENOUE M., STROZZI C. Effects of low temperature heat release on the aerodynamics of a flat piston rapid compression machine: impact on velocity and temperature fields 37th International Symposium on Combustion, 2018 BOUST B., BELLENOUE M., LABARTHE E., GUELOU Y. Combustion Performance of Green Storable Bi-Propellants for Space Propulsion 54th AIAA/SAE/ASEE Joint Propulsion Conference, 2018 MICHALSKI Q., KHA K. Q. N., BOUST B., ROBIN V., BELLENOUE M., MURA A. Joint Numerical and Experimental Characterization of the Turbulent Reactive Flow within a Constant Volume Vessel 54th AIAA/SAE/ASEE Joint Propulsion Conference, 2018 MICHALSKI Q., BOUST B., BELLENOUE M. Toward a cyclic self-ignited Constant-Volume Combustion for airbreathing propulsion applications 54th AIAA/SAE/ASEE Joint Propulsion Conference, 2018 FERRAND A., MARCONI P., CIRLIGEANU R., MERCIER-CARVERAC F., BERTIN Y., BELLENOUE M. High-fidelity modeling of the acceleration of a turboshaft engine during a restart Turbomachinery Technical Conference, TURBO EXPO (ASME), 2018 DOMFANG J.-N., NICOLAÃ J., NADOT Y., HENAFF G., RIDOSZ L. Influence of as-built surface and heat treatment on the fatigue resistance of additively layer manufacturing (alm) alsi10mg alloy 12th International Fatigue Congress (FATIGUE 2018), 2018 BEN ELHAJ SALAH S., NAIT-ALI A., GUEGUEN M., NADOT-MARTIN C. Non-local modeling: macroscopic behavior of a randomly voided material and influence of void morphology on the elastic properties gradient 16th European Mechanics of Materials Conference (EMMC16), 2018 GIGLIOTTI M., PANNIER Y., SINCHUK Y., ANTORANZ GONZALEZ R., LAFARIE-FRENOT M. C., LOMOV S. V. X-Ray ?CT based Assessment of Thermal Cycling Induced Cracks in Non-Crimp 3D Orthogonal Woven Composite Materials with Porosity 13th International Conference on Textile Composites, 2018 FOTI F., PANNIER Y., GIGLIOTTI M., MELLIER D. Damage Characterization During High Temperature Fatigue of Off-axis Woven OMC for Aircraft Applications, TEXCOMP-13 13th International Conference on Textile Composites, 2018 PECORA M., SMERDOVA O., GIGLIOTTI M. Local Characterization of Polymer Matrix in Carbon Fiber 3D Composites 18th European Conference on Composite Materials (ECCM 18), 2018 BARBIERE R., TOUCHARD F., CHOCINSKI-ARNAULT L. Fatigue behaviour of a woven hemp fibre reinforced epoxy composite: damage mechanisms analysis by acoustic emission monitoring 12th International Fatigue Congress (FATIGUE 2018), 2018 BARBIERE R., TOUCHARD F., CHOCINSKI-ARNAULT L. Fatigue behaviour in different moisture conditions of a woven hemp fibre reinforced epoxy composite

18th European Conference on Composite Materials (ECCM 18), 2018 SEGHINI M. C., SARASINI F., TIRILLO J., SANTONICOLA M. G., LAVECCHIA R., ZUORRO A., MAFFEI G., VALENTE T., TOUCHARD F., CHOCINSKI-ARNAULT L., MELLIER D., CECH V. Assessment of interfacial adhesion of flax yarns in thermoset matrices: effect of different surface modification treatments 18th European Conference on Composite Materials (ECCM 18), 2018 MEZON C., MOURZENKO V., THOVERT J.-F., ADLER P. M., PILI E. Thermal convection in fractured porous media of water with variable physical properties EGU General Assembly 2018, 2018 SHI J., BOYER G., THOVERT J.-F. Simulation of the pyrolysis of charring polymers: influence of the porous media properties ESFSS 2018 : European Symposium on Fire Safety Science, 2018 MOST J. M., CHAMPION M. For a more sustainable and safe aviation International Symposium on Sustainable Aviation 2018, 2018 MERCADE C., HALM D., ROGAUME T. Comparison of two modeling approach of the thermochemical damage of type IV hydrogen vessels subjected to fire 18th European Conference on Composite Materials (ECCM 18), 2018 SAINT-PIERRE D., DEEB R., MUSELET D., SIMONOT L., HEBERT M. Light Interreflections and Shadowing Effects in a Lambertian V-Cavity under Diffuse Illumination Proceedings of IS&T Electronic Imaging Symposium, Material appearance, 2018, 2018 SIMONOT L., HEBERT M. Interactive RGB Transparency: a color rendering tool for superimposed translucent layers in digital images Proceedings of IS&T Electronic Imaging Symposium, Material appearance, 2018, 2018 PRADEL P., MALAISE F., DE RESSEGUIER T., DELHOMME C., CADILHON B., QUESSADA J. H., LE BLANC G. Stress wave propagation and mitigation in two polymeric foams 20th Biennial APS Conference on Shock Compression of Condensed Matter (SCCM), 2018 PRADEL P., MALAISE F., DE RESSEGUIER T. Laser-driven shock experiments to investigate mitigation ability of polymeric foams 12th International DYMAT Conference, 2018 FERRAND A., BELLENOUE M., BERTIN Y., CIRLIGEANU R., MARCONI P., MERCIER-CARVERAC F. High-fidelity modeling of the acceleration of a turboshaft engine during a restart Turbomachinery Technical Conference, TURBO EXPO (ASME), 2018 ZEAITER A., FENOT M. Thermal Sensitivity Analysis of a High Power Density Electric Motor for Aeronautical Application IEEE INTERNATIONAL CONFERENCE ON ELECTRICAL SYSTEMS FOR AIRCRAFT, RAILWAY, SHIP PROPULSION AND ROAD VEHICLES & INTERNATIONAL TRANSPORTATION ELECTRIFICATION CONFERENCE (ESARS-ITEC), 2018, 2018

FOTI F., PANNIER Y., MELLIER D., GIGLIOTTI M. Damage characterization during high temperature fatigue of off-axis woven organic matrix composites for aircraft applications 13th International Conference on Textile Composites, 2018 LOMOV S. V., BREITE C., CARRELLA-PAYAN D., CARVELLI V., ERSOY N., GIGLIOTTI M., GONZALEZ R. A., IVANOV S., KERSANI M., LAFARIE-FRENOT M. C., MAVROGORDATO M., MEHDIKHANI M., MELNIKOV A., MESQUITA F., OZ F., PANNIER Y., PYL L., SCHOBERL E., SINCLAIR I., SPEARING S. M. Multi-instrument multi-scale experimental damage mechanics for fibre reinforced composites 13th International Conference on Textile Composites, 2018

COM : Congrès internationaux sans actes ou avec actes à diffusion restreinte : DUBOIS J. B., LAREK F., DANOIX F., DANOIX R., DROUET M., PICHON L. Microstructural characterization of plasma nitrided ? and ?' phases in nickel-based superalloys 16th International Conference on Plasma Surface Engineering, 2018 SINCHUK Y., PANNIER Y., ANTORANZ GONZALEZ R., LOMOV S. V., GIGLIOTTI M. Moisture Diffusion, Induced Swelling and Stress in Carbon/Epoxy 3D Textile Composite Materials with Porosity 21th International Conference on Composites Structures, (ICCS21) , 2018 FOTI F., GIGLIOTTI M., PANNIER Y., MELLIER D. Environmental Effects on High Temperature Fatigue of C/Polyimide Woven Composites for Aircraft Applications 12th International Fatigue Congress (FATIGUE 2018), 2018 PANNIER Y., FOTI F., MELLIER D., GIGLIOTTI M. Damage and Crack Monitoring of High Temperature Fatigue Loaded Organic Textile Composites in an Oxidizing Environment by 2D Digital Image Correlation and 3D Micro-computed-tomography 12th International Fatigue Congress (FATIGUE 2018), 2018 PECORA M., SMERDOVA O., GIGLIOTTI M. Experimental Characterization of the Local Mechanical Property Gradients in Thermo-oxidized Polymers and Polymer Matrix Composites 16th European Mechanics of Materials Conference (EMMC16), 2018 BERINGHIER M., MAIDA D., GIGLIOTTI M. A Novel Protocol for Rapid Identification of Anisotropic Diffusion Properties of Composite Materials with Complex Texture 16th European Mechanics of Materials Conference (EMMC16), 2018 FOTI F., PANNIER Y., MELLIER D., GIGLIOTTI M. The Effect of the Environment on High Temperature Fatigue Behaviour of Carbon/Polyimide Textile Composites for Aircraft Applications 16th European Mechanics of Materials Conference (EMMC16), 2018 FOTI F., PANNIER Y., MELLIER D., GIGLIOTTI M. Damage and Crack Monitoring of high Temperature Fatigue Loaded Textile Composites: 2D-DIC and 3D ?CT Comparison PhotoMechanics2018, 2018 TOUCHARD F., PERRIER A., CHOCINSKI-ARNAULT L., BOUSTIE M. Multiscale interface testing in eco-composites by means of laser shock International Symposium on Dynamic Response and Failure of Composite Materials, 2018 BOUSTIE M., PERRIER A., TOUCHARD F., CHOCINSKI-ARNAULT L., GEHRING F., GUINARD S., SENANI S. Laser shock, a smart tool for studying the mechanical response and adhesion of indicative materials

International Conference on Processing & Manufacturing of Advanced Materials, (THERMEC'2018), 2018 SIMONOT L., CHAVEL P., HEBERT M., OBEIN G. How to deal with speckle patterns in BRDF measurements 3rd progress meeting of JRP BIRD (Bidirectional Reflectance Definitions), 2018 DUBOIS S., DROUELLE E., CORMIER J., GAUTHIER-BRUNET V., VILLECHAISE P., SALLOT P. Tensile creep properties of Ti3AlC2 14th International Ceramics Congress (CIMTEC 2018), 2018 LEVRAUT B., GAUTHIER-BRUNET V., CHARTIER P., NICOLAÃ J., AMIARD G., DUBOIS S. Relationship between microstructure and oxidation resistance of the Ti2AlC MAX phase produced by powder metallurgy route 42nd International Conference and Expo on Advanced Ceramics and Composites, (ICACC 2018), 2018 PAUMIER F., HURAND S., LACROIX B., MAUDET F., SANTOS A. J., DUPEYRAT C., PARAILLOUS M., CORVISIER A., GARCIA R., MORALES F. M., GIRARDEAU T. lndium Tin Oxide thin films deposited by Glancing Angle Deposition technique: Experimental and modelling of the anisotropic optical and electrical properties Materials Science and Engineering 2018 (MSE), 2018 LACROIX B., SANTOS A. J., MAUDET F., PARAILLOUS M., PAUMIER F., DUPEYRAT C., GIRARDEAU T., GARCIA R., MORALES F. M. Advanced (S)TEM applied on antireflective surfaces prepared by oblique angle deposition: a unique tool to establish new correlations between fabrication, nanostructure and performance Materials Science and Engineering 2018 (MSE), 2018 MAUDET F., LACROIX B., PARAILLOUS M., SANTOS A. J., GIRARDEAU T., DUPEYRAT C., GARCIA R., MORALES F. M., PAUMIER F. Comparative study of the transmittance and scattering behavior of continuously graded antireflective coatings and multiple discrete nanostructured layers deposited by Oblique Angle Deposition Materials Science and Engineering 2018 (MSE), 2018 LACROIX B., SANTOS A. J., HURAND S., GIRARDEAU T., MAUDET F., DUPEYRAT C., GARCIA R., MORALES F. M., PAUMIER F. "Fabrication of transparent conductive indium-tin oxide films by oblique angle deposition: Relation between the growth parameters, nanostructure and properties for multispectral applications Simposio MATERPLAT En El Congreso Nacional De Materiales (CNMAT 2018), 2018 SANTOS A. J., LACROIX B., MAUDET F., PARAILLOUS M., PAUMIER F., DUPEYRAT C., GIRARDEAU T., GARCIA R., MORALES F. M. Advanced (S)TEM studies of nanostructured films grown by oblique angle deposition for efficient antireflective properties Simposio MATERPLAT En El Congreso Nacional De Materiales (CNMAT 2018), 2018 MICHALSKI Q., BOUST B., BELLENOUE M. Piston-less cyclic constant-volume combustion of n-decane/air 37th International Symposium on Combustion, 2018 MOUSSOU J., PILLA G., RABEAU F., SOTTON J., BELLENOUE M. High-frequency wall heat flux measurements for internal combustion engines 37th International Symposium on Combustion, 2018

STROZZI C., TSUZUKI K., BELLENOUE M., SOTTON J. Ignition delays of n-decane and kerosene surrogates at low-to-intermediate temperatures 37th International Symposium on Combustion, 2018 FERLIGA F., DOOLEY S., HOWARD M. S., GOLSBOROUGH S., NIEMEYER K. E., WEBER B., YU Y., FOUCHER F., MOREAU B., FAROOQ A., ISSYEV G., SANTNER J., ZYADA A., SAMIMI A. O., VASU S. S., STROZZI C., SOTTON J., BELLENOUE M. Rapid compression machine workshop 37th International Symposium on Combustion, 2018

ACTN : Congrès nationaux avec actes : PRAX C., PICAUT J., FORTIN N., VALEAU V., SAKOUT A., FOY C., CHIAPPINI F. Un code de calcul de type éléments finis pour l'équation de diffusion de l'énergie acoustique dans les bâtiments sur la plateforme opensource I-Simpa 14ème Congrès Français d'Acoustique (CFA 2018), 2018 VALIERE J. C., PALAZZO-BERTHOLON B., FIALA D., ZARA V., BRIOIST P. Archéoacoustique expérimentale : le choix empirique des pots acoustiques par leur géométrie et leur fréquence de résonance 14ème Congrès Français d'Acoustique (CFA 2018), 2018 ZUMU DOLI C., LAZURE H., VALEAU V., BRIZZI L. E., VALIERE J. C., VAN HERPE F. Transmission des fluctuations de bruit dans un modèle d'habitacle automobile générées par un écoulement instationnaire : étude en soufflerie 14ème Congrès Français d'Acoustique (CFA 2018), 2018 COURTY L., MANESCAU B., COUDOUR B., GARO J. P., WANG H. Y. Ventilation conditions effects during a fire in a reduced-scale room 3ème Envirorisk -- Forum de la gestion des risques naturels et technologiques, 2018 SHI J., BOYER G., MOURZENKO V., THOVERT J.-F. On the influence of boundary conditions when determining transport coeffients from digital images of porous media 14ème Journées d'Etudes sur les Milieux Poreux (JEMP), 2018 SHI J., BOYER G., THOVERT J.-F. Simulation of the pyrolysis of charring polymers: influence of the porous media properties 14ème Journées d'Etudes sur les Milieux Poreux (JEMP), 2018 DELLORO F., ZAGOURI D., BOUSTIE M., JEANDIN M. A Laser Shock Approach to Cold Spray 10th International Conference on Processing and Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications (THERMEC 2018), 2018

AFF : Communications par affiche dans un congrès international ou national : CHAURAUD D., DURINCK J., DROUET M., VERNISSE L., BONNEVILLE J. Influence et interaction des marches sur la reconstruction de la surface de l'Au(111) Forum sondes locales 2017, 2018

AP : Autres conférences : PERRIER A., ECAULT R., TOUCHARD F., VIDAL URRIZA M., BAILLARGEAT J., CHOCINSKI-ARNAULT L., BOUSTIE M. Analyse de l'adhérence fibre/matrice par choc laser : application à des composites monofilamentaires chanvre/époxy Journées Scientifiques et Techniques « END-CND des composites », 2018

OS : Ouvrages ou contribution à des ouvrages : ZEGHLOUL S., ROMDHANE L., LARIBI M. A. Computational Kinematics proceedings of the 7th international workshop on computational kinematics, 2018 VALIERE J. C., PALAZZO-BERTHOLON B. Towards a history of architectural acoustics using archeological evidence: how recent works on acoustic pot implementations enlighten the quest of sound quality in churches from 11th to the 17th century , 2018 FADLA F., GRAZIANI A., KERHERVE F., MATHIS R., LIPPERT M., UYSTEPRUYST D., KEIRSBULCK L. Real-Time Reconstruction of Separated Flow Flapping Motion turbulence and interactions, 2018 GRAZIANI A., LIPPERT M., UYSTEPRUYST D., KEIRSBULCK L., KERHERVE F. On the Connection Between Two Low-Frequency Instabilities Induced by the Flow Surrounding a Forward Facing Step at High Reynolds Number turbulence and interactions, 2018 DAIRAY T., LAMBALLAIS E., LAIZET S., VASSILICOS J. C. Physical Scaling of Numerical Dissipation for LES direct and large-eddy simulation x, 2018 SALVETTI M. V., MELDI M., BRUNO L., SAGAUT P. Reliability of Large-Eddy Simulations: Benchmarking and Uncertainty Quantification direct and large-eddy simulation x, 2018 PREAULT C., LARIBI M. A., ARSICAULT M., ZEGHLOUL S. Real Time Redundancy-Based Approach to Robot-Patient Safe Enhancement: Application to Doppler Sonography mechanism design for robotics, 2018

BRE : Brevet : ROSSITTO G., HARAMBAT F., OGER F., BOREE J., FERRAND V., SICOT C. Carrosserie à surface aérodynamique adaptable 2018

RC : Rapports de contrats : BENOIT G., BERTHEAU D. Projet d'étude du gonflement sous pression de xénon de joints Vespel airbus defense & space, 2018

BENOIT G., BERTHEAU D. Projet d'étude du gonflement sous pression de xénon de joints toriques carrés Vespel stelia, 2018