installing reaver and aircrack
TRANSCRIPT
8/12/2019 Installing Reaver and AirCrack
http://slidepdf.com/reader/full/installing-reaver-and-aircrack 1/3
Install aricrack-ng1.sudo apt-get install build-essential libssl-dev
libnl12.wget http://download.aircrack-ng.org/aircrack-ng-1.1.tar.gz3.tar-xzvf aircrack-ng-1.1.tar.gz4.cd aircrack-ng-1.15 Edit common.mak, modifyCFLAGS? =-G-W-Wall-Werror-O3 ToCFLAGS? =-G-W-Wall-O36.make7.sudo make installInstall reaver1 to http://code.google.com/p/reaver-wps/downloads/list download reaver2.sudo apt-get install libpcap-dev sqlite3 libsqlite3-dev libpcap0.8-dev3 Extract the src directory and enter4 .. / configure5.make6.sudo make install
============================= download source install required libraries and tools
download and build aircrack-ng compile and install run =)
Download Source
First you need to download the latest source from http://code.google.com/p/reaver-wps/
# wget http://reaver-wps.googlecode.com/files/reaver-1.4.tar.gz
Extract the tarball
#tar -xzvf reaver-1.4.tar.gz
Install Required Libraries and Tools
Before you can build Reaver you need pcaplib and later on aircrack-ng (iw) to run Reaver
# sudo apt-get install libpcap-dev sqlite3 libsqlite3-dev libpcap0.8-dev
Compile and Install
Build Reaver
# cd reaver-1.4 # cd src # ./configure # make
Install Reaver
# sudo make install
Download aircrack-ng source and build it
8/12/2019 Installing Reaver and AirCrack
http://slidepdf.com/reader/full/installing-reaver-and-aircrack 2/3
Since Ubuntu 12.04 aircrack-ng is not longer in the repository but you can still download it from source and compile it. Its only one little tweak that need to be done since it will not build without the following errors.
johan@ubuntu-lab:~/aircrack-ng-1.1$ make make -C src all make[1]: Entering directory `/home/johan/aircrack-ng-1.1/src make -C osdep make[2]: Entering directory `/home/johan/aircrack-ng-1.1/src/osdep Building for Linux make[3]: Entering directory `/home/johan/aircrack-ng-1.1/src/osdep gcc -g -W -Wall -Werror -O3 -D_FILE_OFFSET_BITS=64 -D_REVISION=0 -fPIC -I.. -c -o osdep.o osdep.c gcc -g -W -Wall -Werror -O3 -D_FILE_OFFSET_BITS=64 -D_REVISION=0 -fPIC -I.. -c -o network.o network.c gcc -g -W -Wall -Werror -O3 -D_FILE_OFFSET_BITS=64 -D_REVISION=0 -fPIC -I.. -c -o linux.o linux.c linux.c: In function is_ndiswrapper: linux.c:165:17: error: variable unused set but not used [-Werror=unused-but-set-variable] linux.c: In function linux_set_rate: linux.c:334:22: error: variable unused set but not used [-Werror=unused-but-set-variable]
linux.c: In function linux_set_channel: linux.c:807:22: error: variable unused set but not used [-Werror=unused-but-set-variable] linux.c: In function linux_set_freq: linux.c:896:22: error: variable unused set but not used [-Werror=unused-but-set-variable] linux.c: In function set_monitor: linux.c:1022:22: error: variable unused set but not used [-Werror=unused-but-set-variable] linux.c: In function do_linux_open: linux.c:1366:12: error: variable unused_str set but not used [-Werror=unused-but-set-variable] linux.c:1352:15: error: variable unused set but not used [-Werror=unused-but-s
et-variable] linux.c: In function get_battery_state: linux.c:1982:35: error: variable current set but not used [-Werror=unused-but-set-variable] cc1: all warnings being treated as errors make[3]: *** [linux.o] Error 1 make[3]: Leaving directory `/home/johan/aircrack-ng-1.1/src/osdep make[2]: *** [all] Error 2 make[2]: Leaving directory `/home/johan/aircrack-ng-1.1/src/osdep make[1]: *** [osd] Error 2 make[1]: Leaving directory `/home/johan/aircrack-ng-1.1/src make: *** [all] Error 2
This is how to build aircrack-ng under Ubuntu 12.04
# sudo apt-get install build-essential # sudo apt-get install libssl-dev # wget http://download.aircrack-ng.org/aircrack-ng-1.1.tar.gz # tar -zxvf aircrack-ng-1.1.tar.gz # cd aircrack-ng-1.1
Edit common.mak with vi as example
8/12/2019 Installing Reaver and AirCrack
http://slidepdf.com/reader/full/installing-reaver-and-aircrack 3/3
vi common.mak
Find the following row
CFLAGS ?= -g -W -Wall -Werror -O3
Remove -Werror so that it looks like this
CFLAGS ?= -g -W -Wall -O3
Save the file, build and install
#make # sudo make install
Run
Reaver is now installed and ready to use. You will first need to put the wifi adapter info monitor mode before you can start and the most easiest way is to useairmon-ng (part of aircrack-ng) that you just installed.
First put your adapter info monitor mode, in my case its wlan0
sudo airmon-ng start wlan0
Run Reaver
sudo reaver -i mon0 -b 00:00:00:00:00:00
Replace MAC 00:00:00:00:00:00 with the actual AP:s MAC address to crack
###note:
This post I take from website and was a wanderfull explain in how to compile reaver and air crack.