installation instructions instructions front disc brake conversion kits: a132-1, a133, a133-1 a134,...

21
INSTALLATION INSTRUCTIONS FRONT DISC BRAKE CONVERSION KITS: A132-1, A133, A133-1 A134, A134-1 1968-73 MUSTANG/FORD ______________________________________________________________________ Thank you for choosing STAINLESS STEEL BRAKES CORPORATION for your braking needs. Please take the time to read and carefully follow these instructions to insure the ease of your installation as well as the proper performance of the complete system. Before beginning your installation, please verify you have received all the parts indicated on the packing slip. If you believe anything to be missing or incorrect, please call our Customer Service Department at 716-759-8666. To assure your installation will go safely and smoothly, have the following items on hand to assist you: JACK & JACK STANDS WRENCH SET LUG WRENCH TUBE WRENCHES TORQUE WRENCH MALLET SOCKET SET WHEEL BEARING GREASE BRAKE CLEANER BRAKE FLUID Stainless Steel Brakes Corporation • 11470 Main Road • Clarence, NY 14031 Phone: (800) 448-7722 • (716) 759-8666 • Fax: (716) 759-8688 www.ssbrakes.com • [email protected]

Upload: truongnhu

Post on 05-May-2018

237 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: INSTALLATION INSTRUCTIONS INSTRUCTIONS FRONT DISC BRAKE CONVERSION KITS: A132-1, A133, A133-1 A134, A134-1 1968-73 MUSTANG/FORD _____ Thank you for choosing STAINLESS STEEL BRAKES

INSTALLATION INSTRUCTIONS FRONT DISC BRAKE CONVERSION KITS: A132-1, A133, A133-1 A134, A134-1

1968-73 MUSTANG/FORD______________________________________________________________________

Thank you for choosing STAINLESS STEEL BRAKES CORPORATION for your brakingneeds. Please take the time to read and carefully follow these instructions to insure the ease of yourinstallation as well as the proper performance of the complete system.

Before beginning your installation, please verify you have received all the parts indicated onthe packing slip. If you believe anything to be missing or incorrect, please call our Customer ServiceDepartment at 716-759-8666.

To assure your installation will go safely and smoothly, have the following items on hand toassist you:

JACK & JACK STANDS WRENCH SETLUG WRENCH TUBE WRENCHESTORQUE WRENCH MALLETSOCKET SET WHEEL BEARING GREASEBRAKE CLEANER BRAKE FLUID

Stainless Steel Brakes Corporation • 11470 Main Road • Clarence, NY 14031Phone: (800) 448-7722 • (716) 759-8666 • Fax: (716) 759-8688

www.ssbrakes.com • [email protected]

Page 2: INSTALLATION INSTRUCTIONS INSTRUCTIONS FRONT DISC BRAKE CONVERSION KITS: A132-1, A133, A133-1 A134, A134-1 1968-73 MUSTANG/FORD _____ Thank you for choosing STAINLESS STEEL BRAKES

IN ORDER TO SAFELY ACCOMPLISH THIS CONVERSION A KNOWLEDGE OF FRONT SUSPENSION REPLACEMENT PARTS AND USE OF NECESSARY TOOLS IS REQUIRED; FRONT SPRINGS MUST BE SAFELY SECURED WHILE SPINDLES AND BALL JOINTS ARE BEING REPLACED. REALIGNMENT OF FRONT SUSPENSION IS REQUIRED AFTER COMPLETION OF PARTS EXCHANGE. SEEKHELP IF UNFAMILIAR WITH THIS PROJECT.

1) Raise the vehicle until the wheels and tires clear the floor; support front of vehicle on jack stands. Remove front wheels and tires. Block upper control arms to prevent downward movement when spindles are removed.

2) Remove spindle assembly:a) Remove tie rod ends from spindle after removing retaining hardware. We strongly

recommend the use of a splitter "pickle fork" for this purposeb) Disconnect both upper and lower ball joints and remove spindle assemblies from car.

Separate ball joints from spindle.c) Save original hardware for re-installation

3) Install new spindle assembly:a) Prior to reassembly, inspect ball joints for wear. If any play is indicated, replace with

new parts.

SPINDLE BEARING SURFACES ARE PRECISION MACHINED, PROTECT AGAINSTDAMAGE DURING INSTALLATION.

b) Install new spindles and ball joints. Make sure that steering arms point toward rear of car. Torque ball joints to specification.

c) Re-install tie-rod ends with new 1/4” spacers provided in kit.d) The 1/4” spacer goes between the spindle and the castellated nut.e) Install new cotter pin.

4) Install rotor and splash shieldsa) Remove three (3) hex head cap screws from spindles and install circular splash shields

(cut outs around caliper brackets).b) Replace (removed) triangular stamping over splash shield and retain with three (3) hex

head cap screw previously removed.Torque to 10-11 ft-lb.c) Install new wheel bearings, after packing with a good grade of wheel bearing grease.

(Inner wheel bearings must first be installed in rotors and retained with provided grease seals). Use large socket for correct seating of grease seal.

d) Install rotor over spindle and follow up with outer bearing, secure to spindle with hardware supplied in kit.

e) Torque spindle nut to 12 ft-lbs while turning rotor. Back off nut one flat and insert new cotter pin.

IF SLOT AND PIN HOLE DO NOT LINE UP, BACK NUT OFF AN ADDITIONAL 1/2FLAT OR LESS AS REQUIRED TO INSERT COTTER PIN.

f) Install grease cap.

1A132-1, A133, A133-1, A134, A134-1 Revision 4

Page 3: INSTALLATION INSTRUCTIONS INSTRUCTIONS FRONT DISC BRAKE CONVERSION KITS: A132-1, A133, A133-1 A134, A134-1 1968-73 MUSTANG/FORD _____ Thank you for choosing STAINLESS STEEL BRAKES

5) Preparation and Installation of calipers (see line drawing)a) Prior to installing calipers, connect flex lines to calipers with hollow bolt and (2) copper

washer, one on top and one on bottom. Do not tighten bolt until after caliper is mounted.

b) Install new caliper locating pin insulators (from kit) in anchor plate of each caliper.c) Attach the outboard shoe to the caliper legs with new hold-down pins and clips.d) Assemble the inner shoe and lining on the anchor plate with the shoe tabs on top of

the anchor plate bosses and under new anti-rattle spring clips.e) Spread the shoes and linings apart, and position the caliper on the disc.f) Use denatured alcohol to lubricate caliper locating pins and secure calipers to bracket.

(Never use any oil, grease or similar lubricant) Torque pins to 35 ft-lbs.g) Tighten hollow bolt securing flexible brake line to 17-25 ft-lbs.

IF PAD INCLUDES "WEAR SENSOR," LEFT AND RIGHT SIDE PADS WILL BE DIFFERENT; THE SENSOR ALWAYS SHOULD BE TOWARD THE REAR OF THE CAR.

h) Connect free end of flex lines to the 12 point retainer brackets on the frame and securewith "horseshoe clip." Turn steering assembly through a full left to right turn, whilenoting flex lines, to assure that they do not twist or take a double bend. If incorrect,remove them from the 12 point bracket and re-orient them so that they bend with minimum distortion. When correct, connect frame line ferrule nut to flex line and tighten.

FAILURE TO COMPLETE THIS PART OF THE INSTALLATION MAY CAUSE BRAKE LOCK-UP IN SERVICE. THE THIN WALL INTERIOR HOSE OF THE FLEX LINE CAN COLLAPSE AND RESTRICT THE FLUID FROM RELIEVING THE CALIPER BRAKE LINE PRESSURE WHEN THE BRAKE PEDAL IS RELEASED.

6) Power booster(if installed)a) Remove original master cylinder and save clevis and associated hardware.b) If kit has been ordered with power brake option, line up booster to determine which

bolts require removal to allow attachment to fire wall. Remove four bolts and install booster (do not tighten fasteners at this time). Assemble jam nuts and clevis onto booster input shaft before final tightening.

c) Align holes of clevis with lower hole in brake pedal arm. Adjust clevis to allow 1/8" end play and assure that stop light switch is still in adjustment.

d) The most convenient source for the vacuum line to be used with the booster is the engine intake manifold. However, the minimum vacuum developed by the engine, at idle, should be no less than 18" of Mercury. In addition, the rubber hose between the intake manifold and the booster must be specifically vacuum hose with an outside diameter of no less than 11/32".

7) Master cylinder (provided in kit)a) Always bench bleed master cylinder before installing in car.b) New brake lines are included for proper installation.

2A132-1, A133, A133-1, A134, A134-1 Revision 4

Page 4: INSTALLATION INSTRUCTIONS INSTRUCTIONS FRONT DISC BRAKE CONVERSION KITS: A132-1, A133, A133-1 A134, A134-1 1968-73 MUSTANG/FORD _____ Thank you for choosing STAINLESS STEEL BRAKES

3A132-1, A133, A133-1, A134, A134-1 Revision 4

c) An adjustable proportioning valve, part number A0707, is provided in the kit. The valveis used for front to rear brake balancing. Turning the knob in the "decrease" directionwill reduce line pressure to the rear drum brakes and prevent premature rear brake"lock-up." The valve is installed in the line coming from the original equipment distribution block port that serves the front to rear chassis brake line (see included diagram).

REFER TO THE PROPORTIONING VALVE INSTRUCTIONS FOR PROPER ADJUSTMENT AND INSTALLATION.

8) Brake fluid and bleeding the systema) After completing all hydraulic connections, install new brake fluid (at master cylinder

reservoir), pump brake pedal several times to initially fill the system and advance the caliper pistons to their working position.

b) Bleed all air from the system using pedal bleed, vacuum or gravity bleed method.Make sure that a firm pedal is experienced before driving vehicle.

c) When pressure bleeding is employed the correct pressure setting is 10-15 psi. (max.) for the bleeder tank.

d) If power brakes are fitted, the engine should not be running and the vacuum reserve should be reduced to zero by pumping the brake pedal or pulling the booster vacuum hose.

e) Tapping the caliper with a rawhide mallet, before fluid is flowing, may assist in obtaining a better bleed job.

f) Brake bleeding can be simplified by assuring that there are no line restrictions, by using the gravity bleed approach as follows :1) Leave all bleeder screws open when installing calipers.2) Fill master cylinder reservoir, do not pressurize master cylinder or pump brake

pedal; instead observe bleeder ports until brake fluid flows out; then shut bleeder valves.

3) No further procedure is required if brake pedal is hard after shutting off all bleeder valves. Make sure that the master cylinder is "topped-off."

g) With bleeders closed and system bled, a hard pedal should be experienced so that at full application and with the engine running, the toe of your left foot can still be placedbetween the bottom of the pedal and the floor.

DO NOT DRIVE THE CAR UNTIL THE BRAKES STOP THE CAR SAFELY, INITIAL BRAKING TESTS SHOULD BE DONE IN A SAFE OPEN AREA!!

1) In addition there should be brake pedal end-play of 3/4” to 1" inch (from full release until initial braking action takes place).

2) Power brake cars will experience a "drop-off" of the pedal when the engine is started. This is a normal condition, and signifies that the booster is working correctly.

Page 5: INSTALLATION INSTRUCTIONS INSTRUCTIONS FRONT DISC BRAKE CONVERSION KITS: A132-1, A133, A133-1 A134, A134-1 1968-73 MUSTANG/FORD _____ Thank you for choosing STAINLESS STEEL BRAKES

4A132-1, A133, A133-1, A134, A134-1 Revision 4

DO NOT DRIVE THE CAR UNTIL THE BRAKES STOP THE CAR SAFELY, INITIAL BRAKING TESTS SHOULD BE DONE IN A SAFE OPEN AREA!!

WHEN BLEEDING THE SYSTEM, PUMP FLUID SLOWLY INTO THE NEW SYSTEM.IF FLUID “FOAMS,” IT WILL TAKE A LOT OF FLUID TO BLEED THE BRAKES.SOFT PEDAL IS A RESULT OF POOR BLEEDING. TAKE YOUR TIME!

h) If brake pedal "end-play" is excessive, adjust push-rod between master cylinder and booster (to lengthen) in 1/4 turn increments until 1" of "end-play" is achieved.

9) Final inspectiona) Reinstall wheel and tire assemblies.b) Recheck all mechanical and hydraulic connections, look for brake fluid leaks, recheck

brake pedal operation.c) Lower vehicle to ground and test braking system for proper operation before driving.

Page 6: INSTALLATION INSTRUCTIONS INSTRUCTIONS FRONT DISC BRAKE CONVERSION KITS: A132-1, A133, A133-1 A134, A134-1 1968-73 MUSTANG/FORD _____ Thank you for choosing STAINLESS STEEL BRAKES

5A132-1, A133, A133-1, A134, A134-1 Revision 4

Page 7: INSTALLATION INSTRUCTIONS INSTRUCTIONS FRONT DISC BRAKE CONVERSION KITS: A132-1, A133, A133-1 A134, A134-1 1968-73 MUSTANG/FORD _____ Thank you for choosing STAINLESS STEEL BRAKES

6A132-1, A133, A133-1, A134, A134-1 Revision 4

Page 8: INSTALLATION INSTRUCTIONS INSTRUCTIONS FRONT DISC BRAKE CONVERSION KITS: A132-1, A133, A133-1 A134, A134-1 1968-73 MUSTANG/FORD _____ Thank you for choosing STAINLESS STEEL BRAKES

7A132-1, A133, A133-1, A134, A134-1 Revision 4

Page 9: INSTALLATION INSTRUCTIONS INSTRUCTIONS FRONT DISC BRAKE CONVERSION KITS: A132-1, A133, A133-1 A134, A134-1 1968-73 MUSTANG/FORD _____ Thank you for choosing STAINLESS STEEL BRAKES

8A132-1, A133, A133-1, A134, A134-1 Revision 4

Page 10: INSTALLATION INSTRUCTIONS INSTRUCTIONS FRONT DISC BRAKE CONVERSION KITS: A132-1, A133, A133-1 A134, A134-1 1968-73 MUSTANG/FORD _____ Thank you for choosing STAINLESS STEEL BRAKES

Solutions Guide Revision 5 716-759-8666 • [email protected]

How do you bench bleed a MasterCylinder?

Secure one of the ears in a vise so that you can take alarge screwdriver and push the piston in. Fill thereservoir with clean fluid. Take a dummy line or our M/Cbleeding kit and hook it up to the two ports. Front line tofront and rear line to rear reservoirs. Slowly stroke themaster and let it return slowly. You should see many airbubbles in the fluid. Repeat this step until you do notsee any more air bubbles. SSBC recommends ten (10)slow pumping strokes after you see no more airbubbles. This will insure a good hard pedal. (See SSBCpart #0460 Instruction Sheet)

What is the best pad for my vehicle?

Your choice of pads should be determined by how andwhere you drive the vehicle. If you drive in heavy stopand go traffic you would need a different pad thansomeone who is road racing. Contact SSBC for thecorrect application.

How often should brake fluid bechanged? (street application only,not racing)

When brake fluid turns brown, it is time to change thefluid. The brown color indicates that the fluid hasabsorbed water and dirt. D.O.T. #3 & #4 fluids absorbwater. Silicone brake fluid is not for track racing.

How can I tell which reservoir is thefront or rear of the Master Cylinder?

The front reservoir is usually larger than the rear. Insome cases, they are the same size. As a rule, for GMcars & trucks, the rear reservoir is for the rear brakes.On Ford cars & trucks, the front reservoir is for the rearbrakes. On front wheel drive vehicles, the brakes aresplit diagonally. Each bowl of the master cylinderservices one front wheel and one rear wheel. This willbe important if you are installing a distribution block,proportioning valve, or residual valve. Hint: The largerbowl will feed the disc brakes.

1

Why is my brake pedal soft?

1) In most cases, Air is trapped in the lines or calipers.Try re-bleeding the system. Do not force new fluid intonew brake lines. It may foam and be very difficult tobleed. Make sure that the bleeder screws on thecalipers are facing upward!

2) If all the air is out of the system, the pushrod fromthe booster may need adjustment, under the dash, tomake it longer. Do not extend it too long or it will notallow the fluid to return, causing brakes to drag. Yourpushrod may not be adjustable. If the pushrod can bemade longer, try ¼ turn adjustments at a time. SSBCstocks adjustable pushrods for many vehicles. Inaddition, the pushrod between the Booster and theMaster Cylinder may need adjustment. Not all Boosterto Master pushrods are adjustable.

3) You may have a bad Master Cylinder. Before youdetermine this, you should make sure that all the air isout of the system. When installing a new MasterCylinder, always bench bleed first. If you did not, takeoff the Master Cylinder and bench bleed it. (See BenchBleeding Instructions below)

Why does the car pull to one side?

The side that the car is pulling to is the caliper that isworking. Re-bleed the opposite side and try carefullystopping again.

Why does it feel like there is noPower Assist?

The Booster may not be getting enough vacuum tooperate. On some high lift cams, the engine does notdevelop enough vacuum. The Booster needs at least16” of vacuum to operate correctly at idle. If you do nothave at least 16 inches of vacuum at idle, you may haveto add a vacuum pump to your system.Check for vacuum leaks. There may be leaks in theintake manifold or hoses that would cause low vacuum.The Booster may be bad. Do a vacuum test. If theBooster can retain a vacuum for three (3) minutes afterthe vehicle is shut off, it is not a bad Booster (refer tosteps 1 & 2). All Master Cylinders must be bench bledin a vise before being installed on the vehicle.

Solutions Guideto commonly asked questions.

Page 11: INSTALLATION INSTRUCTIONS INSTRUCTIONS FRONT DISC BRAKE CONVERSION KITS: A132-1, A133, A133-1 A134, A134-1 1968-73 MUSTANG/FORD _____ Thank you for choosing STAINLESS STEEL BRAKES

Solutions Guide Revision 5 716-759-8666 • [email protected]

Where is the best place to install aproportioning valve?

The best place to install a proportioning valve is afterthe distribution block. Do Not install it between theDistribution Bock and the Master Cylinder. You willnot be able to get a hard pedal. Anywhere after theDistribution Block and before the rear flex hose isacceptable for installation.

Why should the flex hoses bereplaced? They look O.K. from theoutside.

Flex hoses should be replaced every time the calipersare serviced. They flex up and down, just like a shockabsorber. They are also under high pressure internally.Flex hoses have a rubber liner that will collapse overtime. If it does collapse, it will act as a check valve andnot allow fluid to return to the Master Cylinder.

Will my pedal get harder by replacingthe flex hoses?

No. When the flex hoses are replaced, re-bleed thebrake system. Normally what happens is that bleedingcauses a harder brake pedal. A better bleeding job andtaking your time will result in the same situation.

Are the rubber flex hoses expandingcausing a soft pedal?

Not likely. A soft pedal is usually a sign of air in thesystem due to poor bleeding. Flex hoses have nylonwebbing that is molded into the internal rubber. It is verystrong and will hold up to 3,000 P.S.I. Installing braidedstainless steel hoses is not necessary; it only improvesappearance.

How much brake pressure does ittake to stop my vehicle?

Most vehicles, power or non power brake, develop1,200 P.S.I. When you panic stop or jump on the brakeshard, a surge of 1,400 P.S.I. can be achieved. If afactory proportioning valve installed on the vehicle, therear brakes are only developing 600 – 700 P.S.I. Drumbrakes require lower pressure because they grab morequickly. When rear disc brakes are installed, the rearbrake pressure may be increased to 800 – 1,000 P.S.I.or more. A good way to check the pressures and to seeif the system is working correctly, use a pressure gaugescrewed into the bleeder port (SSBC part # A1704). Avehicle with less than 600 P.S.I will not stop!

How tight should the wheel bearingsbe?

The front bearings should always be torqued. Not justhand tightened. Bearings usually require 12-15 Ft./Lbs.of torque. Then you will probably need to back off a littleto align the cotter pin hole. Do Not over tighten; thebearing life will be shortened. This procedure onlyapplies to rear wheel drive vehicles with separatebearings and races. On vehicles with one piece sealedbearing assemblies or hub assemblies, refer to aservice manual.

What type of differential fluid shouldI use in my rear axle?

If you have positraction, use a Hypoid or Limited Slipadditive that is designed for your particular rear end. Ifyou do not have positraction, any type of 80 –90 weightgear lube is acceptable. Fluid should be changed oftenif you are trailering or any type of extreme usage. Thisfluid does brake down with time and usage.

Page 12: INSTALLATION INSTRUCTIONS INSTRUCTIONS FRONT DISC BRAKE CONVERSION KITS: A132-1, A133, A133-1 A134, A134-1 1968-73 MUSTANG/FORD _____ Thank you for choosing STAINLESS STEEL BRAKES

3Solutions Guide Revision 5 716-759-8666 • [email protected]

Replacement Pads for SSBC Performance Brake Kits

*RE-ORDER PADS DIRECTLY FROM SSBC

A109A109-1A109AFA109ARA109SA110A110-10A110-11A110-12A110-13A110-14A110-15A110-16A110-17A110-18A110-19A110-2A110-3A110-4A110-5A110-6A110-7A110-8A110-9A111A111-10A111-11A111-12A111-13A111-14A111-15A111-16A111-17A111-18A111-19A111-2A111-20A111-21A111-22A111-23A111-24A111-25A111-26A111-27A111-28A111-29A111-3A111-30A111-31A111-32A111-33A111-4A111-5A111-6A111-7A111-8A111-9A112A112-1A112-11A112-12A112-13A112-14A112-15A112-16A112-17

A112-2A112-3A112-4A112-5A112-6A112-7A112-8A112-9A112-93A113A113-1A113-10A113-11A113-12A113-4A113-5A113-6A113-7A113-8A113-9A114A115A116A117A117-1A117-10A117-11A117-12A117-13A117-14A117-15A117-2A117-3A117-4A117-5A117-6A117-7A117-8A117-9A118A120A120-10A120-11A120-12A120-2A120-2PA120-2POA120-2PPOA120-3A120-4A120-5A120-6A120-7A120-7AA120-7MA120-8A120-9A120DA120PA121A121-2PA121-2PAA121-2PAPOA121-2PMA121-2PMPOA121P

A121P-AA121P-MA123A123-1A123-13A123-14A123-15A123-16A123-17A123-18A123-1AA123-1CA123-2A123-3A123-3AA123-4A123-4AA123-5A123-58A123-58AA123-59A123-59AA123-5AA123-6A123-67A123-68A123-69A123-6AA123-7A123-8A123-9A123-AA124A125A125-1A125-10A125-11A125-12A125-13A125-14A125-15A125-16A125-17A125-18A125-19A125-1FA125-2A125-20A125-21A125-22A125-23A125-24A125-25A125-26A125-27A125-28A125-29A125-3A125-30A125-31A125-32A125-33A125-34A125-35A125-36A125-4

A125-5A125-6A125-7A125-8A125-9A125-FA125PA126A126-1A126-10A126-11A126-12A126-13A126-14A126-15A126-16A126-17A126-18A126-19A126-2A126-20A126-21A126-22A126-23A126-24A126-25A126-26A126-27A126-28A126-29A126-3A126-30A126-31A126-32A126-33A126-34A126-35A126-37A126-38A126-39A126-4A126-40A126-41A126-46A126-5A126-51A126-6A126-61A126-7A126-71A126-71AA126-7AA126-8A126-9A127A127-1A127-2A127-3A127-4A127-5A127-6A127-7A127-8A127-9A128A128-1

101210108101281012810121049101291011310113101510135109510128101281047101131047101281012810151015101101011010129104910151015101101011010110101101012910129101291012910471011310113101131011310151013510951012810151012910135109510128101281012810128101281012810128A1015-3101510471047109510951011310471047109510133-1

1047107110471061-11012810711012810151047107110711071101510951012810151012810128107010128104710471049104710471011310951095101131011310113104710711071101281012810128104710951049A103310128101281012810110101101012910129101281014410144101281012810128101281012810128A1033A1033A103310110101101011010110A10129A1033

A1033A103310501050109510951011610116109510951015105010711050101510501015105010501015105010151015107110711071107110711012810128101281015104710471047101281012810128101281015101510151015101101011010471047101101012810129101291012910129101131011310113101131047101131015101510135109510128101281047

1047104710471012810128104710471070P10471015101510151094A1094A1094A1094A1094A10151094A10471015101291012810128101281012810128101281012810128A1094B10128101281015101281012810128109510951095A1094B101261012610126104710471050105010941094A1094A109410941049104710128107010711012810128101510471015104710471047

D-8D-531D-531D-531D-8D-204D-43D-154D-154D-52D-137D-731D-531D-531D-347D-154D-347D-531D-531D-52D-52D-11D-11D-43D-204D-52D-52D-11D-11D-11D-11D-43D-43D-43D-43D-347D-154D-154D-154D-154D-52D-137D-731D-531D-52D-43D-137D-731D-531D-531D-531D-531D-531D-531D-531*D-52D-347D-347D-731D-731D-154D-347D-347D-731D-784

D-347D-347D-347D-531D-531D-347D-347D-413D-347D-52D-52D-52D-370D-370D-370D-370D-370D-52D-370D-347D-52D-43D-531D-531D-531D-531D-531D-531D-531D-531*D-531D-531D-52D-531D-531D-531D-731D-731D-731*D-834D-834D-834D-347D-347D-52D-52D-369D-369**D-369D-204D-347D-531D-413D-412D-531D-531D-52D-347D-52D-347D-347D-347

**D-52D-52D-731D-731D-749D-749D-731D-731D-52D-52D-412D-52D-52D-52D-52D-52D-52D-52D-52D-52D-52D-412D-412D-412D-412D-412D-531D-531D-531D-52D-347D-347D-347D-531D-531D-531D-531D-52D-52D-52D-52D-11D-11D-347D-347D-11D-531D-43D-43D-43D-43D-154D-154D-154D-154D-347D-154D-52D-52D-137D-731D-531D-531D-347

D-347D-412D-347D199D-531D-412D-531D-52D-347D-412D-412D-412D-52D-731D-531D-52D-531D-531D-413D-531D-347D-347D-204D-347D-347D-154D-731D-731D-154D-154D-154D-347D-412D-412D-531D-531D-531D-347D-731D-204*D-531D-531D-531D-11D-11D-43D-43D-531D-289D-289D-531D-531D-531D-531D-531D-531***D-11D-11D-11D-11**

SSBC SSBCKit # Pad # FMSI #

SSBC SSBCKit # Pad # FMSI #

SSBC SSBCKit # Pad # FMSI #

SSBC SSBCKit # Pad # FMSI #

Page 13: INSTALLATION INSTRUCTIONS INSTRUCTIONS FRONT DISC BRAKE CONVERSION KITS: A132-1, A133, A133-1 A134, A134-1 1968-73 MUSTANG/FORD _____ Thank you for choosing STAINLESS STEEL BRAKES

4Solutions Guide Revision 5 716-759-8666 • [email protected]

...Replacement Pads Continued

*RE-ORDER PADS DIRECTLY FROM SSBC

A128-2A128-3A128-4A128-5A128-6A128-7A129A129-1A129-10A129-12A129-13A129-1AA129-2A129-20A129-22A129-23A129-24A129-2AA129-3A129-3AA129-4A129-4AA129-5A129-6A129-8A129-AA130A130-1A130-2A132A132-1A132-AA132-MA133A133-1A133-2A133-2PA133-3A133-3PA133-3POA134A134-1A134-1PA134-1PPOA135A135-1A135-1AA135-2A135-3A136A136-1A137A137-1A137-1AA137-2A137-3A137-3AA138A138-1A138-1AA138-2A138-3A138-4A138-AA140A140-1

A141A141-1A142A142-1A143A143-1A143-5A143-58A143-59A144A144-1A145A145-1A146A146-1A148A148-1A148-14A148-14AA148-15A148-15AA148-16A148-16AA148-17A148-17AA148-18A148-18AA148-1AA148-2A148-22A148-23A148-23FSA148-23FSEA148-23RSA148-23RSEA148-24FSEA148-24RSA148-24RSEA148-25FSEA148-25RSEA148-26A148-26FSA148-26RSA148-27A148-27FSA148-27RSA148-28A148-29A148-3A148-30A148-30EA148-31A148-31AA148-32A148-32AA148-33A148-34A148-4A148-4EA148-5A148-6FA148-6FEA148-6GA148-6GEA148-7FA148-7FE

A148-7GA148-7GEA148-AA150A150-1A150-2A151A151-1A151-2A152A152-1A153A153-1A153-2A153-3A154A154-1A154-2A154-3A154-4A154-5A154-6A155A155-1A155-2A156A156-1A156-2A156-3A156-4A157A157-1A157-2A158A158-1A158-2A158-3A158-4A159A159-1A160A160-1A160-2A160-3A160-4A161A161-1A161-2A162A162-1A162-2A162-3A163A163-1A163-2A163-3A163-4A163-5A163-6A163-7A163-8A163-9A164A164-1A164-10A164-11

A164-12A164-13A164-14A164-15A164-16A164-17A164-2A164-3A164-4A164-5A164-6A164-7A164-8A164-9A165A165-1A165-2A165-3A165-4A166-1A166-10A166-13A166-14A166-15A166-16A166-17A166-18A166-19A166-1AA166-2A166-20A166-21A166-22A166-23A166-24A166-25A166-26A166-27A166-28A166-29A166-3A166-30A166-3AA166-4A166-5A166-6A166-7A166-8A166-9A167A167-1A167-2A167-3A167-4A167-5A168A168-1A168-10A168-11A168-2A168-3A168-4A168-5A168-6A168-7A168-8

1047104910471049104710471050105010128105010501015105010128109510128109510151050101510501015107110128101281015104710471047104610461046104610461046A1033A103310110101101012910461046101101011010501094AA10941094101101047104710121050101510128105010151084-21084-210113105010501050101131084-210128

1084-21071105010711084-210711084108410841084-210711084-2107110711084-21084-21084-2105010151050101510501015105010151050101510113A10331050101101011010129101101012910129101101012910129101291012810128101281012810128101281012810128A103310110101291084-2101131084-21011310951095101101012910110A103310129A1033101291011010129

1011010129101131047104710471071101131095A103310110A1033A10331011010110A1033A10331011010110A1033A10331095104710471047A1033A10331011010110109510471012810128104710471094A1094A10128101001094A1012810471015101510471015104710151095101131095101131015104710151015104710151011310113101131011310128101281012810128

101281012910128101261012810126101281012810128101281012810128101281012810128101281095109510133-1101510151015101510128101510151012810151015101281015101081047A1015-3101510471047104710471047101510471015101281015101510151015101281015101510128101510151012810151015101510151012810151015101281015101510128

D-347D-204D-347D-204D-347D-347D-52D-52D-531D-52D-52D-52D-52D-531D-731D-531D-731D-52D-52D-52D-52D-52D-412D-531D-531D-52D-347D-347D-347D-34D-34D-34D-34D-34D-34**D-11D-11D-43D-34D-34D-11D-11D-52D-370*D-369D-11D-347D-347D-8D-52D-52D-531D-52D-52D-154D-154D-154D-52D-52D-52D-154D-154D-531

D-531D-43D-531D-834D-531D-834D-531D-531D-531D-531D-531D-531D-531D-531D-531D-531D-731D-731D-784D-52D-52D-52D-52D-531D-52D-52D-531D-52D-52D-531D-52D-531D-347*D-52D-347D-347D-347D-347D-347D-52D-347D-52D-531D-52D-52D-52D-52D-531D-52D-52D-531D-52D-52D-531D-52D-52D-52D-52D-531D-52D-52D-531D-52D-52D-531

D-11D-43D-154D-347D-347D-347D-412D-154D-731*D-11**D-11D-11**D-11D-11**D-731D-347D-347D-347**D-11D-11D-731D-347D-531D-531D-347D-347D-370D-370D-531D-268D-370D-531D-347D-52D-52D-347D-52D-347D-52D-731D-154D-731D-154D-52D-347D-52D-52D-347D-52D-154D-154D-154D-154D-531D-531D-531D-531

D-154D-412D-52D-412D-154D-412D-154D-154D-154D-154D-412D-154D-412D-412D-154D-154D-154D-52D-52D-52D-52D-52D-52D-52D-52D-52D-52D-154*D-52D-11D-11D-43D-11D-43D-43D-11D-43D-43D-43D-531D-531D-531D-531D-531D-531D-531D-531*D-11D-43D-154D-154D-154D-154D-731D-731D-11D-43D-11*D-43*D-43D-11D-43

SSBC SSBCKit # Pad # FMSI #

SSBC SSBCKit # Pad # FMSI #

SSBC SSBCKit # Pad # FMSI #

SSBC SSBCKit # Pad # FMSI #

Page 14: INSTALLATION INSTRUCTIONS INSTRUCTIONS FRONT DISC BRAKE CONVERSION KITS: A132-1, A133, A133-1 A134, A134-1 1968-73 MUSTANG/FORD _____ Thank you for choosing STAINLESS STEEL BRAKES

5Solutions Guide Revision 5 716-759-8666 • [email protected]

...Replacement Pads Continued

*RE-ORDER PADS DIRECTLY FROM SSBC

A170A170-1A171A171-1A171-2A171-3A172A172-1A172-2A172-3A172-4A172-5A172-6A173A173-1A173-3A174A174-1A180-MA180-SA181A182A185-MA185-SA186-1A187A187-1A187-2A187-3A187-4A188A188-1A189A189-1A190A191A192A193A193-1A194

A2350014A2350014RA2351000A2351001A2351002A2351003A2351004A2351005A2351006A2351007A2351008A2351009A2351010A2351011A2351012A2351013A2351014A2351015A2351016A2351017A2351018A2351019A2351020A2351021A2351022A2351023A2351024A2351025A2351026A2351027A2351028A2360000A2360001A2360002A2360003A2360004A2360005A2360006A2360007A2360008A2360009A2360010A2360011A2361001A2361002A2361003A2370000A2370001A2370002A2370003A2370004A2370005A2370006A2370007A2370008A2370009A2370010A2370011A2370012A2370013A2370014A2370015A2370016A2370017A2380001A2380002

1015101281015101510128104710151015104710151015101510151012810128A101351015101510151015101131011310151015A109410951095101261012610133-11011010110101101095A101291012910135109510133-11097

10116101171015101510151010010941094109410151010010941094101510941015109410151094101131011310118(F) 10119(R)1012610119101181011310133-110118(F) 10143(R)1014310133-1(F) 10134(R)10133-1A10331046104610661061(F) 1049(R)106110103(F) 10104(R)1081(F) 10145(R)1061-1(F) 1047(R)101271012710137(F) 10104(R)10146(F) 10147(R)10146(F) 10147(R)10147109210921093101510931011110941094101111011110111101141012010125101251093(F) 10139(R)10140(F) 10141(R)10142(F) 10141(R)10121(F) 10122(R)10123(F) 10124(R)

D-52D-531D-52D-52D-531D-347D-52D-52D-347D-52D-52D-52D-52D-531D-531*D-52D-52D-52D-52D-154D-154D-52D-52*D-731D-731D-834D-834D-784D-11D-11D-11D-731*D-43D-137D-731D-784D-614

D-749D-750D-52D-52D-52D-368D-369D-369D-369D-52D-368D-369D-369D-52D-369D-52D-369D-52D-369D-154D-154D-785(F) D-792(R)D-834D-792D-785D-154D-784D-785(F) D-974A(R)D-974AD-784(F) D-785(R)D-784*D-34D-34D-237D-199(F) D-204(R)D-199D-600(F) D-627(R)D-412(F) D-627A(R)D-199(F) D-347(R)D-711D-711D-491(F) D-627(R)D-749(F) D-1012(R)D-749(F) D-1012(R)D-1012D-203D-203D-477D-52D-477D-529D-369D-369D-529D-529D-529D-746D-820D-702D-702D-477(F) D-666(R)D-790(F) D-791(R)D-945(F) D-791(R)D-591(F) D-512(R)D-592(F) D-592(R)

SSBC SSBCKit # Pad # FMSI #

Short Stop...™ Slotted Rotor Upgrade KitsSSBC SSBCKit # Pad # FMSI #

A2350000A2350001A2350002A2350003A2350004A2350004RA2350005A2350006A2350007A2350008A2350008RA2350009A2350009RA2350010A2350012A2350013

1011210151015101131099(F) 1070(R)107010101(F) 10102(R)1081(F) 1070(R)1081(F) 1070(R)1095(F) 1096(R)10961097(F) 1098(R)1097(F) 1098(R)101510151081

D-8D-52D-52D-154D-623(F) D-413(R)D-413D-294(F) D-295(R)D-412 (F) D-413(R)D-412 (F) D-413(R)D-731(F) D-732(R)D-732D-614(F) D-628(R)D-614(F) D-628(R)D-52D-52D-412

SSBC SSBCKit # Pad # FMSI #

Page 15: INSTALLATION INSTRUCTIONS INSTRUCTIONS FRONT DISC BRAKE CONVERSION KITS: A132-1, A133, A133-1 A134, A134-1 1968-73 MUSTANG/FORD _____ Thank you for choosing STAINLESS STEEL BRAKES

Solutions Guide Revision 5 716-759-8666 • [email protected]

REPLACEMENT

PARTS

ORDER FORM

DATE: __________________________ CUSTOMER # (from receipt): ____________

ORDERED BY:NAME: _______________________________

COMPANY: ____________________________

STREET: ______________________________

CITY: ___________ ST: ____ ZIP: _________

DAY PHONE: ___________________________

FAX: _________________________________

E-MAIL: ______________________________

SHIP TO:NAME: _______________________________

COMPANY: ____________________________

STREET: ______________________________

CITY: ___________ ST: ____ ZIP: _________

DAY PHONE: ___________________________

FAX: _________________________________

E-MAIL: ______________________________

VEHICLE INFORMATION:TYPE OF AUTOMOBILE: _________________________

YEAR ______ ENGINE: __ 4 CYL. __ 6 CYL. __ 8 CYL.

TYPE OF DRIVING:__ STREET __ RACING

__ STREET & SLALOM __ STREET MODIFIED

QUANTITY PART # DESCRIPTION UNIT PRICE AMOUNT

METHOD OF PAYMENT:__ CHECK/MONEY ORDER __ VISA __ MASTERCARD __ DISCOVER __ AMEX

CREDIT CARD #: _____________________________ EXP: _____________

SIGNATURE: ___________________________________________________

Price subject to change without notice. Not responsible for typographical errors.

NOTE: Name, address & telephone number must be printed on checks. Driver’s License numberrequired for personal checks.

Total Merchandise

NY Residents Sales Tax

Ins. (add $0.35 per $100.00)

UPS Shipping (please call)

TOTAL

FREE FREIGHTIF ORDERED WITHIN 30 DAYS OF INITIAL ORDER

MAIL OR FAX YOUR ORDER!

ORDER INFORMATION:

6

Stainless Steel Brakes Corporation11470 Main Road • Clarence, NY 14031Ph: 716-759-8666 Fx: 716-759-8688ssbrakes.com • [email protected]

Page 16: INSTALLATION INSTRUCTIONS INSTRUCTIONS FRONT DISC BRAKE CONVERSION KITS: A132-1, A133, A133-1 A134, A134-1 1968-73 MUSTANG/FORD _____ Thank you for choosing STAINLESS STEEL BRAKES

7Solutions Guide Revision 5 716-759-8666 • [email protected]

How and why do I bench bleed a master cylinder?

When installing or replacing a master cylinder, it is critical that allair is removed from the master cylinder. This can easily be doneby bench bleeding the master cylinder prior to installation. Usingthe SSBC master cylinder bleeder kit (#0460):

1) Place your master cylinder in a vise by the ears (not body).Make sure it is level.

2) Attach a piece of clear plastic hose to the short end of one ofthe plastic nozzles. Do the same to the other hose andnozzle.

3) Clip the plastic bridge to the wall and push the ends of thehose through the holes so they are SUBMERGED in the reservoir on either side of the wall.

4) Press the tapered end of the nozzle FIRMLY into the cylinder port hole with a twisting motion. Repeat thisprocedure on the other port hole.

5) Fill the reservoir with CLEAN brake fluid recommended by the manufacturer.6) Using full strokes, push the piston in, then release. Do this until ALL the air bubbles have disappeared

from the clear plastic hose. (CAUTION-MASTER CYLINDER WILL NOT BLEED PROPERLY UNLESSHOSES ARE SUBMERGED IN BRAKE FLUID UNTIL THE BLEEDING PROCESS IS COMPLETED.)

Now mount master cylinder and avoid brake fluid leaking out of front and rear ports during installation.

Bleeding steps for Dual Port Master Cylinder

If you have a master cylinder with dual port holes (4 port holes - 2 on each side), it is necessary to bleed bothport sides of the master cylinder. If both sides of the master cylinder are not bled, there will be air trapped inthe master cylinder and your brakes will not function properly.

To bleed dual port master cylinders:

1) Follow steps 1 - 6 above on the side you will be hooking the brake lines to. Plug the other side.2) Once the air bubbles are no longer visible in the plastic hose, open the bleeder screws in the supplied

plugs and allow the mater cylinder to gravity bleed. DO NOT push the master cylinder piston in while theplugs are gravity bleeding.

3) When clear, steady streams of fluid are coming out of both bleeders, close and tighten the bleeders. Givethe master cylinder piston several strokes, making sure there are still no bubbles present in the clearplastic tubes.

4) Remove the tubes and plastic fittings and mount the master cylinder on the vehicle being careful not tospill brake fluid on any painted surfaces.

Page 17: INSTALLATION INSTRUCTIONS INSTRUCTIONS FRONT DISC BRAKE CONVERSION KITS: A132-1, A133, A133-1 A134, A134-1 1968-73 MUSTANG/FORD _____ Thank you for choosing STAINLESS STEEL BRAKES

8Solutions Guide Revision 5 716-759-8666 • [email protected]

TORQUE SPECIFICATIONSBEFORE DRIVING YOURVEHICLE, YOU SHOULDCHECK THE TORQUE ON ALLNUTS AND BOLTS IN THE KIT,INCLUDING ANY SLIDERBOLTS ON THE CALIPERS.RE-TORQUE CALIPER BOLTSAFTER 500 MILES. ALLSPECIFICATIONS ARE IN FT-LBS.

SAE 2 SAE 7 SAE 8SAE 5

5.8 9.8 10.98.8

LowCarbon(soft)

MediumCarbon Alloy

MediumCarbonHeat Treat

MediumCarbonAlloy

U.S.

SteelType

Metric

BOLT GRADES

1/4” 20 4 3 8 6 10 8 12 9 14 111/4” 28 6 4 10 7 12 9 14 10 16 135/16” 18 9 7 17 13 21 16 25 18 29 235/16” 24 12 9 19 14 24 18 29 20 33 263/8” 16 16 12 30 23 40 30 45 35 49 393/8” 24 22 16 35 25 45 35 50 40 54 447/16” 14 24 17 50 35 60 45 70 55 76 617/16” 20 34 26 55 40 70 50 80 60 85 681/2” 13 38 31 75 55 95 70 110 80 113 901/2” 20 52 42 90 65 100 80 120 90 126 1009/16” 12 52 42 110 80 135 100 150 110 163 1309/16” 18 71 57 120 90 150 110 170 130 181 1445/8” 11 98 78 150 110 140 140 220 170 230 1845/8” 18 115 93 180 130 210 160 240 180 255 2043/4” 10 157 121 260 200 320 240 380 280 400 3203/4” 16 180 133 300 220 360 280 420 320 440 3507/8” 9 210 160 430 320 520 400 600 460 640 5107/8” 14 230 177 470 360 580 440 660 500 700 5601” 8 320 240 640 480 800 600 900 680 980 7801” 12 350 265 710 530 860 666 990 740 1060 845

Bolt Thread Dry Oiled Dry Oiled Dry Oiled Dry Oiled Dry OiledDia. per inch

SAE Bolt 2 2 5 5 7 7 8 8 Socket SocketGrade Head Head

Cap CapScrew Screw

5mm 3.5 5 6 86mm 6 9 10.5 128mm 15 22 25 3210mm 29 44 51 6212mm 51 76 89 111

Bolt Dia. Oiled Oiled Oiled Oiled

METRIC 5.8 8.8 9.8 10.9 Per SAE J1701 and SAE J1701M specifications.

Page 18: INSTALLATION INSTRUCTIONS INSTRUCTIONS FRONT DISC BRAKE CONVERSION KITS: A132-1, A133, A133-1 A134, A134-1 1968-73 MUSTANG/FORD _____ Thank you for choosing STAINLESS STEEL BRAKES

9Solutions Guide Revision 5 716-759-8666 • [email protected]

UNIVERSAL FRONT DISC BRAKE CHECKLIST[ ] 1) Spindle Properly secured to ball joints and tie rods with castle nut and cotter pin.

[ ] 2) All mounting bolts properly tightened.

[ ] 3) Wheel bearings properly packed with grease.

[ ] 4) Inner bearing must be installed before grease seal.

[ ] 5) Rotor / bearings slide onto spindle with ease.

[ ] 6) Washer, castle nut properly torqued and cotter pin installed.

[ ] 7) Calipers installed and properly torqued.

[ ] 8) Spin rotor and check for any interference. (If any interference is found, resolve problembefore driving vehicle.)

[ ] 9) Flex lines are properly installed with no interference.

[ ] 10) Power booster (if applicable) installed properly.

[ ] 11) Master cylinder bench bled according to the instructions.

[ ] 12) All brake lines are properly tightened and free of leaks.

[ ] 13) Turn wheels lock to lock and check for any interference.

[ ] 14) Place wheel onto vehicle and spin the wheel to make sure there is no interferencebetween the brakes and wheel.

UNIVERSAL REAR DISC BRAKE CHECKLIST[ ] 1) All bolts on base bracket properly tightened.

[ ] 2) All caliper mounting bolts properly tightened.

[ ] 3) Rotor slides onto axle with ease.

[ ] 4) No interference with rotor and any other parts (splash shield, brackets, etc.).

[ ] 5) Caliper is centered over the rotor (because of difference in axle lengths, you may have toshim caliper in or out).

[ ] 6) No interference with caliper and rotor.

[ ] 7) All brake lines are tight with no leaks.

[ ] 8) Parking brake is properly adjusted and not dragging, with vehicle on ground.

[ ] 9) Adjustable proportioning valve installed (if applicable).

[ ] 10) Distribution block modification made (if applicable).

[ ] 11) Brake system properly bled.

WITH EVERY NEW SET OF ROTORS AND PADS, YOU SHOULD GIVE YOUR VEHICLE 200 - 250 MILES OF EASY DRIVING TO PROPERLY SEAT THE PADS TO THE ROTORS. DO NOT TAKE THE VEHICLE UP TO 60 MPH AND JAM ON THE BRAKES BEFORE THE FIRST 200 - 250 MILE BREAK IN PERIOD IS OVER, OR YOU WILL GLAZE THE PADS AND ROTORS.

Page 19: INSTALLATION INSTRUCTIONS INSTRUCTIONS FRONT DISC BRAKE CONVERSION KITS: A132-1, A133, A133-1 A134, A134-1 1968-73 MUSTANG/FORD _____ Thank you for choosing STAINLESS STEEL BRAKES

Solutions Guide Revision 5 716-759-8666 • [email protected]

TECHNICAL SUPPORT / WARRANTY POLICY

You have just purchased a high quality product manufactured by Stainless Steel BrakesCorporation. To ensure proper installation, please read all instructions thoroughly beforebeginning your work. In most applications, your kit will install as the instructions indicate.From time to time, the original equipment on some vehicles may have slight variationsthat can effect the ease of installation. Minor modifications during installation may benecessary to successfully install your kit. If modifications are necessary, please refer toa licensed mechanic and/or contact our technicians for modification approval.

Installation of braking, steering and suspension components and systems require properprocedures and methods to assure safe and correct operations.

Always test completed installations in a safe area. For proper operation, and ifquestionable, correct prior to placing the vehicle in service.

Our company maintains experienced technical service personnel, including a licensedprofessional engineer who have the knowledge and background to help you withinstallation or operating problems. Our technicians may be reached by telephone at 716-759-8666, Monday - Friday, 9:30 AM - 5:30PM EST. If unavailable, please leave a briefmessage, including your day phone number, and they will return your call as soon aspossible. You can also e-mail us at [email protected]. If you prefer, we will be pleasedto speak with your installing mechanic.

If it becomes necessary to return an item for any reason, a Return Goods Authorization(RGA) Number must first be obtained by telephone. A simple written description of thereason for the return should be included with the part. Your name and phone numbershould also be included. (Use the attached form.) “Defective” is not enough of adescription. See following page for detailed instructions.

We urge you not to disassemble or alter any part supplied, nor purchase additional partsor services in order to facilitate installation. Lack of prior approval by our company willconstitute a violation of our warranty with consequent denial of reimbursement for parts -faulty or not.

Before contracting outside professional assistance, please be aware that we do notreimburse for labor charges under any circumstance. Consult our standard warranty cardprovided with your order.

Page 20: INSTALLATION INSTRUCTIONS INSTRUCTIONS FRONT DISC BRAKE CONVERSION KITS: A132-1, A133, A133-1 A134, A134-1 1968-73 MUSTANG/FORD _____ Thank you for choosing STAINLESS STEEL BRAKES

Solutions Guide Revision 5 716-759-8666 • [email protected]

NEED TO RETURN A PART?FOLLOW THESE INSTRUCTIONS.

> Did you call our Technical Assistance (716-759-8666) before you decided to make areturn? If not, you should do so now.

> You must have a Return Goods Authorization Number (RGA) issued to you prior toreturning any item. If you return without an RGA #, you run the risk of not receivingcredit.

> Make sure to include the completed Return Form with invoice and RGA # with yourparts.

> Whenever possible, please return item in original box with invoice and RGA # clearlymarked on the outside of the box.

> Any return must be shipped postage paid - NO collect shipments will be accepted.

> All warranty items will be sent ground UPS. Any other type of shipping service will beat customer’s expense.

It is a good idea to insure the returned part(s) for the full value to protect yourself againstloss. We strongly suggest you ship by UPS or U.S. Mail, no BUS or AIR shipments willbe accepted. All foreign returns must have authorization.

NOTE: Under no circumstance should any product(s) or part(s) be returned withoutprior authorization number (RGA #). Any part which, in our opinion, showsevidence of being used, installed contrary to SSBC instruction, defaced,subjected to improper handling, packaging or shipping by the customer will notbe eligible for exchange, refund or warranty consideration.

Page 21: INSTALLATION INSTRUCTIONS INSTRUCTIONS FRONT DISC BRAKE CONVERSION KITS: A132-1, A133, A133-1 A134, A134-1 1968-73 MUSTANG/FORD _____ Thank you for choosing STAINLESS STEEL BRAKES

Solutions Guide Revision 5 716-759-8666 • [email protected]

RETURN FORM

Name: _____________________________ Invoice #: _________________________

Address: ___________________________ Date Purchased: ____________________

___________________________________ Purchased From: ___________________

Phone: ____________________________

List item(s) and a detailed explanation of why you are returning the item(s):

__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

RGA # ____________________________

Use this label for your package.

From: ____________________________________________________________________________________

TO: Stainless Steel Brakes Corp.11470 Main RoadClarence, NY 14031

RGA #: ______________ Invoice #: _____________