installation instructions for part at-581fd/aw-581fd · for the 2007 ford edge/expedition, 2006-07...
TRANSCRIPT
INSTALLATION INSTRUCTIONS FOR PART AT-581FD/AW-581FD
AT-581FD/AW-581FDKIT FEATURES
• Double DIN Radio Provision• Stacked ISO Units Provision• DIN Radio Provision with Pocket• ISO DIN Radio Provision with Pocket
A) Radio Housing (Double DIN and Stacked ISO DIN) • B) Double DIN Brackets • C) Spacers• D) (4) Screws • E) Radio Housing • F) ISO Brackets • G) Trim Plate
KIT COMPONENTS
A
1-800-221-0932 © COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION
www.metraonline.com
TOOLS REQUIRED:
B
C D
FORD Edge 2007-2008 / Expedition 2007-2008
Explorer 2006-2008 / Explorer Sport Trac 2006-2008F-150 2004-2008 / F Series 2005-2008
Five-Hundred 2005-2007 / Focus 2005-2007 / FreeStar 2004-2007 Freestyle 2005-2007 / Fusion 2006-08Mustang 2005-2009 / Super Duty 2008
Taurus 2008 / Taurus X 2008MERCURY
Monterey 2004-2007 / Milan 2006-2008Montego 2005-2007 / Mountaineer 2006-2008
Sable 2008 LINCOLN
Mark LT 2005-2008Factory Navigation Only: MKX 2007-2009 / Navigator 2007-2008
APPLICATIONS
E
Cutting Tool • Panel Removal Tool • Phillips Screwdriver • Socket Set
GF
TABLE OF CONTENTS
AT-581FD/AW-581FD
*Note: Refer also to the instructions included with the aftermarket radio.
Dash Disassembly
Ford Edge 2007-2008...................................................................................................................1
Ford F-150 2004-2008 / Expedition 2007-2008...........................................................................1
Lincoln Mark LT 2005-2008..........................................................................................................1
Ford Mustang 2005-2009.............................................................................................................2
Ford Five Hundred 2005-2007.....................................................................................................3
Mercury Sable 2008.....................................................................................................................3
Ford Taurus 2008..........................................................................................................................3
Mercury Montego 2005-2007......................................................................................................3
Ford Fusion 2006-2008................................................................................................................4
Mercury Milan 2006-2008 .......................................................................................................... 4
Ford Freestyle 2005-2007............................................................................................................5
Ford Taurus X 2008 .....................................................................................................................5
Ford Freestar 2004-2007.............................................................................................................6
Mercury Monterey 2004-2007......................................................................................................6
Ford Focus 2005-2007.................................................................................................................7
Ford Explorer 2006-2008.............................................................................................................8
Ford Explorer Sport Trac 2006-2008............................................................................................8
Mercury Montaineer 2006-2008..................................................................................................8
Ford F Series Super Duty 2005-2008.......................................................................................... 9
Ford Super Duty 2008................................................................................................................10
Lincoln MKX 2007-2009 ............................................................................................................11
Lincoln Navigator 2007-2008.....................................................................................................12
Kit Assembly
Double DIN Radio Provision.........................................................................................................13
Stacked ISO Units Provision.......................................................................................................14
DIN Radio Provision with Pocket...............................................................................................15
ISO DIN Radio Provision with Pocket. .......................................................................................16
Final Assembly ..........................................................................................................................17
KNOWLEDGE IS POWEREnhance your installation and fabrication skills byenrolling in the most recognized and respectedmobile electronics school in our industry.Log onto www.installerinstitute.com or call800-354-6782 for more information and take stepstoward a better tomorrow.
AT-581FD/AW-581FD DASH DISASSEMBLY
FORD F-150 2004-2008LINC0LN MARK LT 2005-2008FORD EXPEDITION 2007-2008
FORD EDGE 2007-2008A
B
1
Disconnect the negative battery ter-minal to prevent an accidental shortcircuit.
1
Unsnap and remove entire panel sur-rounding the radio and climate con-trols. (Figure A)
2
Remove (4) 9/32" screws to removethe factory radio. (Figure B)
3
Continue to kit assembly.
2
AT-581FD/AW-581FD DASH DISASSEMBLY
A
B
C
DE
FORD MUSTANG 2005-2009
Remove the small rectangular shifter
lever trim panel if equipped. (Figure A)
2
Remove (4) 9/32” screws from the
radio to remove. (Figure E)
7
Remove (2) Phillips screws from underthe center armrest at the back of theshifter trim panel (including cup holders). (Figure B)
3
Unclip and remove panel. (Figure B)4
Unclip and remove the (2) centerstack trim panels from the left andright side of the radio and climatecontrols. (Figure C)
5
Remove (6) 9/32” screws from cen-ter trim panel surrounding the radioand climate controls then unclip andremove panel. (Figure D)
6
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.
Disconnect the negative battery termi-nal to prevent an accidental short cir-cuit.
1
3
A
B
C
DE
FORD FIVE-HUNDRED 2005-2007/FORD TAURUS 2008MERCURY MONTEGO 2005-2007, MERCURY SABLE 2008
Unclip and remove the small rectan-gular trim around shift lever. (Figure A)
2
Unclip and remove the entire panel(including cup holders) surrounding theshift lever. (Figure B)
3
Remove (2) 9/32” screws at the bottomof the center radio/climate controlpanel. (Figure C)
4
Remove (4) 9/32” screws from theradio to remove. (Figure E)
6
Unclip and remove the center panel.(Figure D)
5
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.
Disconnect the negative battery termi-nal to prevent an accidental short cir-cuit.
1
AT-581FD/AW-581FD DASH DISASSEMBLY
FORD FUSION 2006-2008MERCURY MILAN 2006-2008
A
B
4
Disconnect the negative battery ter-minal to prevent an accidental shortcircuit.
1
Unsnap and remove entire panel sur-rounding the radio and climate con-trols. (Figure A)
2
Remove (4) 9/32" screws to removethe factory radio. (Figure B)
3
Continue to kit assembly.
AT-581FD/AW-581FD DASH DISASSEMBLY
FORD FREESTYLE 2005-2007FORD TAURUS X 2008
A
B
5
Disconnect the negative battery ter-minal to prevent an accidental shortcircuit.
1
Unclip and remove entire panel sur-rounding the radio and a/c controls.(Figure A)
2
Remove (4) 9/32” screws from radioto remove. (Figure B)
3
Continue to kit assembly.
AT-581FD/AW-581FD DASH DISASSEMBLY
FORD FREESTAR 2004-2007MERCURY MONTEREY 2004-2007
A
B
6
Disconnect the negative battery ter-minal to prevent an accidental shortcircuit.
1
Unsnap and remove entire panel sur-rounding the radio and climate con-trols. (Figure A)
2
Remove (4) 9/32" screws to removethe factory radio. (Figure B)
3
Continue to kit assembly.
AT-581FD/AW-581FD DASH DISASSEMBLY
FORD FOCUS 2005-2007
A
B
7
Disconnect the negative battery ter-minal to prevent an accidental shortcircuit.
1
Unsnap and remove entire panel sur-rounding the radio and climate con-trols. (Figure A)
2
Remove (4) 9/32" screws to removethe factory radio. (Figure B)
3
Continue to kit assembly.
AT-581FD/AW-581FD DASH DISASSEMBLY
FORD EXPLORER/EXPLORER SPORT TRAC 2006-2008MERCURY MOUNTAINEER 2006-2008
A
B
8
Disconnect the negative battery ter-minal to prevent an accidental shortcircuit.
1
Open center console and remove (2)Phillips screws then unclip andremove entire panel surroundingshifter. (Figure A)
2
Remove dash panel surrounding radioto access the factory radio screws.(Figure B)
3
Continue to kit assembly.
C
Remove (4) 9/32" screws to removethe factory radio. (Figure B)
4
AT-581FD/AW-581FD DASH DISASSEMBLY
FORD F SERIES SUPER DUTY 2005-2008
A
B
9
Disconnect the negative battery ter-minal to prevent an accidental shortcircuit.
1
Unsnap and remove entire panel surrounding the radio and climate controls. (Figure A)
2
Remove (4) 9/32" screws to removethe factory radio. (Figure B)
3
Continue to kit assembly.
AT-581FD/AW-581FD DASH DISASSEMBLY
10
3
5
4
FORD SUPER DUTY 2008
A
Disconnect the negative battery ter-minal to prevent an accidental shortcircuit.
1
Unclip and remove the power outletpanel and the blank panel on the leftand right side of the radio trim panel.(Figure A)
Remove the (2) 9/32” screws exposedbehind the two panels remove instep 2.
Unclip and remove the entire radiotrim panel including the a/c controland vents.
Remove (4) 9/32” screws securingthe radio.
Continue to kit assembly
2
AT-581FD/AW-581FD DASH DISASSEMBLY
11
LINCOLN MKX 2007-2009
A
B
C
Disconnect the negative battery ter-minal to prevent an accidental shortcircuit.
1
Open center console lid and unclip andremove the center console trim panelsurrounding the shifter. (Figure A)
2
3
Unclip and remove the upper andlower center trim panel as oneassembly. (Figure C)
4
Remove (4) 9/32” screws securingthe radio. Unplug and remove theRadio.
5
Continue to kit assembly.
Remove (2) Phillips screws from thestorage bin then unclip and removethe bin. (Figure B)
AT-581FD/AW-581FD DASH DISASSEMBLY
LINCOLN NAVIGATOR 2007-2008A
B
1
Remove (2) 9/32” screws from thebottom of the radio/climate controltrim panel. (Figure B)
Disconnect the negative battery ter-minal to prevent an accidental shortcircuit.
3
Unclip and remove the panel sur-rounding the shifter. (Figure A)
2
Unclip and remove the entire panelsurrounding the radio and includingthe climate controls. (Figure B)
4
Remove (4) 9/32” screws securingthe radio. Unplug and remove theRadio.
5
Continue to kit assembly.
12
AT-581FD/AW-581FD DASH DISASSEMBLY
13
AT-581FD/AW-581FD KIT ASSEMBLY
DOUBLE DIN RADIO PROVISION
Slide the Double DIN radio into theradio housing/bracket assembly andsecure the radio to the assembly usingthe screws supplied with the radio.(Figure C)
4
*Note: Refer also to the instructions included with the aftermarket radio.
Attach the double DIN brackets to the radio housing. Note: The notch in the hous-ing should be on top. (Figure 3A,3B)
3
2 For the 2007 Ford Edge/Expedition,2006-07 Explorer, 2006-07 Fusion,2007 Mustang and the 2008 SuperDuty attach the included spacers tothe back of the radio housing mount-ing tabs.a. If your vehicle is not listed abovemove to step 3. (Figure A)
1 For the 2007 Ford Edge/Expedition, 2006-07 Explorer/Fusion/Mercury Milan, 2004-07 F-150, 2005-07 Five Hundred/Freestyle/Mustang/Mercury Montego, 2005-07 Lincoln Mark LT and the 2008 Super Duty,cut and remove the rear mounting tabs from the Double DIN Bracketsa. If your vehicle is not listed above move to step 2.
3A
Continue to kit assembly.
A
3B
C
14
STACKED ISO UNITS PROVISION
AT-581FD/AW-581FD KIT ASSEMBLY
Attach the double DIN brackets to theradio housing. Note: The notch in thehousing should be on top. (Figure 3A,3B)
3
Slide the ISO mount units into theradio housing/bracket assembly andsecure the units to the assembly usingthe screws supplied with the units.(Figure C)
4
*Note: Refer also to the instructions included with the aftermarket radio.
For the 2007 Ford Edge/Expedition,2006-07 Ford Explorer, 2006-07Ford Fusion, 2007 Mustang andthe 2008 Super Duty attach theincluded spacers to the back of theradio housing mounting tabs. (Figure A)a. If your vehicle is not listed abovemove to step 3.
2
1 For the 2007 Ford Edge/Expedition,2006-07 Explorer/Fusion/Mercury Milan, 2004-07 F-150,2005-07 Five Hundred/Freestyle/Mustang/MercuryMontego, 2005-07 Lincoln Mark LTand the 2008 Ford Super Duty, cutand remove the rear mounting tabsfrom the Double DIN Brackets.a. If your vehicle is not listed abovemove to step 2.
Continue to kit assembly.
A
3A
3B
C
15
AT-581FD/AW-581FD DASH DISASSEMBLY
1A
1B
A
B
DIN HEAD UNIT PROVISION
(b) For the Ford Freestar 2004-07,Monterey 2004-07, Focus 2005-07, and the F Series Super Duty2005-07, slide the included bracketsonto the sides of the radio housingspocket from the back of the housingforward. (Figure 1B)
If your vehicle is not listed abovemove to step 2.
Slide the DIN cage into the RadioHousing and secure by bending themetal locking tabs outward. (Figure A)
2
Slide the aftermarket radio into thecage until it snaps in place.(Figure B))
3
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.
(a)For the Ford Edge/Expedition2007, Explorer 2006-07, Fusion2006-07, Mustang 2007 and theSuper Duty 2008 attach the includedspacers to the back of the radiohousing mounting tabs. (Figure 1A)NOTE: Use the screws supplied with thiskit to mount the radio housing in thevehicles that require the spacers.
1
16
1A
1B
A
B
ISO HEAD UNIT PROVISION
b) For the Ford Freestar 2004-07,Monterey 2004-07, Focus 2005-07, and the F Series Super Duty2005-07, slide the included bracketsonto the sides of the radio housingspocket from the back of the housingforward. (Figure 1B)
If your vehicle is not listed abovemove to step 2.
Mount the ISO Brackets to the headunit with the screws supplied withthe unit. (Figure A)
2
Slide the head unit into the radioopening until the side clips engage.(Figure B)
3
Snap the Trim plate into the RadioHousing. (Figure B)
4
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.
(a) For the Ford/Edge Expedition2007, Explorer 2006-07, Fusion2006-07, Mustang 2007 and theSuper Duty 2008 attach the includedspacers to the back of the radiohousing mounting tabs. (Figure 1A)NOTE: Use the screws supplied with thiskit to mount the radio housing in thevehicles that require the spacers.
1
AT-581FD/AW-581FD DASH DISASSEMBLY
17
AT-581FD/AW-581FD FINAL ASSEMBLY
FINAL ASSEMBLY
(A) Strip wire ends back 1/2"
B) Twist ends together
C) Solder
D) Tape
A
B
C
D
Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individ-ually tape off the ends of any unused wires to prevent electrical short circuit.)
Re-connect the negative battery terminal and test the unit for proper operation.
Reassemble radio and dash assemblies in reverse order of disassembly.
1
2
3
FINAL WIRING CONNECTIONSMake wiring connections using the EIA color code chart shown below and the instructions included with thehead unit. Metra recommends making connections as shown below; Strip, Splice, Solder, Tape. Isolate and
individually tape off ends of any unused wires to prevent electrical short circuit.
METRA / EIA WIRING CODE
12V Ignition / Acc . . . . . . . . . . Red
12V Batt / Memory. . . . . . . . . Yellow
Ground. . . . . . . . . . . . . . . . . . Black*
Power Antenna. . . . . . . . . . . . Blue
Amp Turn-On . . . . . . . . . . . . . Blue / White
Amp Ground. . . . . . . . . . . . . . Black / White
Illumination . . . . . . . . . . . . . . Orange
Dimmer . . . . . . . . . . . . . . . . . Orange / White
Right Front (+) . . . . . . . . . . . . Gray
Right Front (-). . . . . . . . . . . . . Gray/ Black
Left Front (+) . . . . . . . . . . . . . White
Left Front (-). . . . . . . . . . . . . . White / Black
Right Rear (+) . . . . . . . . . . . . Violet
Right Rear (-) . . . . . . . . . . . . . Violet / Black
Left Rear (+) . . . . . . . . . . . . . Green
Left Rear (-) . . . . . . . . . . . . . . Green / Black
*NOTE: When a Black wire is not present, ground radio to vehicle chassis.All colors may not be present on all leads due to manufacturer’s specifications.
NOTES
NOTAS
17
AT-581FD/AW-581FD MONTAJE FINAL
MONTAJE FINAL
(A) Pele ½ in de los extremos de los cables
B)Tuerza los extremos juntos.
C)Suelde.
D)Encinte.
A
B
C
D
Ubique el arnés del cableado de fábrica en el tablero. Metra recomienda usar el adaptador de acoplamiento adecuado y realizar las conexiones como se muestra. (Aísle y encinte individualmente los extremos de cualquier cable que no esté en uso, a fin de evitar un cortocircuito eléctrico).Vuelva a conectar el terminal negativo de la batería y pruebe la unidad para verificar que funcione correctamente.Vuelva a montar los conjuntos del radio y tablero en forma inversa al desmontaje.
1
2
3
CONEXIONES DE CABLEADO FINALES Realice las conexiones de cableado usando el cuadro de códigos de colores de la Alianza de industrias electrónicas (Electronic Industries Alliance, EIA) que se muestra a continuación y las instrucciones incluidas con la unidad central. Metra recomienda realizar las conexiones como se muestra a continuación; Pelar, empalmar, soldar, encintar. (Aísle y encinte individualmente los extremos de cualquier cable que no esté en uso, a fin de evitar un cortocircuito eléctrico).
CÓDIGO DE CABLEADO DE METRA/EIAIgnición de 12 V/acc . . . . . . . . Rojo
Batería de 12 V/memoria. . . . . . . . . Amarillo
Conexión a tierra. . . . . . . . . . . . . . . Black*
Antena eléctrica . . . . . . . . . . . Azul
Encendido Amp. . . . . . . . . . . . . Azul/blanco
Conexión a tierra Amp . . . . . . Negro/blanco
Iluminación. . . . . . . . . . . . . . Naranja
Atenuador. . . . . . . . . . . . . . . . . Naranja/blanco
Parte delantera derecha (+). . . . . . . . . . . . Gris
Parte delantera derecha (-). . . . . . . . . . . . . Gris/negro
Parte delantera izquierda (+). . . . . . . . . . . . . Blanco
Parte delantera izquierda (-). . . . . . . . . . . . . . Blanco/negro
Parte trasera derecha (+). . . . . . . . . . . . Violeta
Parte trasera derecha (-). . . . . . . . . . . . . Violeta/negro
Naranja Parte trasera izquierda (+). . . . . . . . . . . . . Verde
Naranja Parte trasera izquierda (-). . . . . . . . . . Verde/negro
*NOTA: Cuando no haya un cable negro, conecte a tierra el radio con el chasis del vehículo. Es posible que no se encuentren todos los colores en todos los conductores como consecuencia de las especificaciones del fabricante.
16
1A
1B
A
B
ACCESORIO PARA UNIDADES CENTRALES ISO
(b) Para los modelos Ford Freestar2004-07, Monterey 2004-07, Focus2005-07 y Super Duty Serie F 2005-07, deslice los soportes incluidos alos lados del bolsillo del alojamientode radio desde la parte posterior delalojamiento hacia adelante. (Figura
1B)Si su vehículo no se incluyóantes, continúe con el paso 2.
Monte los soportes ISO en la unidadcentral con los tornillos suministra-dos con la unidad. (Figura A)
2
Deslice la unidad central en la aber-tura del radio hasta que enganchenlos ganchos laterales. (Figura B)
3
Coloque a presión la placa de termi-nación en el alojamiento del radio.(Figura B)
4
Continúe con el montaje final.
*Nota: Asimismo, remítase a las instrucciones incluidas con el radio de posventa.
(a) Para los modelos FordEdge/Expedition 2007, Explorer 2006-07, Fusion 2006-07, Mustang 2007 ySuper Duty 2008, coloque los espaci-adores incluidos en la parte posteriorde las lengüetas de montaje del alo-jamiento del radio. (Figura 1A)NOTA: Use los tornillos suministrados con estekit para montar el alojamiento del radio en losvehículos que requieren los espaciadores.
1
MONTAJE DEL KIT AT-581FD/AW-581FD
15
1A
1B
A
B
ACCESORIO PARA UNIDADES CENTRALES DIN
(b) Para los modelos Ford Freestar2004-07, Monterey 2004-07, Focus2005-07 y Super Duty Serie F 2005-07, deslice los soportes incluidos alos lados del bolsillo del alojamientode radio desde la parte posterior delalojamiento hacia adelante. (Figura1B)Si su vehículo no se incluyóantes, continúe con el paso 2.
Deslice la caja DIN en el alojamientodel radio y sujétela doblando laslengüetas de cierre de metal haciaafuera. (Figura A)
2
Deslice el radio de posventa en lacaja hasta que calce a presión en sulugar. (Figura B)
3
Continúe con el montaje final.
*Nota: Asimismo, remítase a las instrucciones incluidas con el radio de posventa.
(a) Para los modelos FordEdge/Expedition 2007, Explorer2006-07, Fusion 2006-07,Mustang 2007 y Super Duty2008, coloque los espaciadoresincluidos en la parte posteriorde las lengüetas de montajedel alojamiento del radio.(Figura 1A)NOTA: Use los tornillos suministrados con estekit para montar el alojamiento del radio en los
vehículos que requieren los espaciadores.
1
MONTAJE DEL KIT AT-581FD/AW-581FD
14
ACCESORIO PARA UNIDADES ISO APILADAS
Coloque los soportes DIN dobles en elalojamiento del radio. Nota: La muescadel alojamiento debería estar en laparte superior. (Figuras 3A, 3B)
3
Deslice las unidades de montaje ISOen el conjunto de alojamiento delradio/soporte y sujete las unidades almontaje usando los tornillos sumin-istrados con las unidades.(Figura C)
4
*Nota: Asimismo, remítase a las instrucciones incluidas con el radio de posventa.
Para los modelos FordEdge/Expedition 2007, Ford Explorer2006-07, Ford Fusion 2006-07,Mustang 2007 y Super Duty 2008,coloque los espaciadores incluidosen la parte posterior de las lengüetasde montaje del alojamiento del radio.(Figura A)a. Si su vehículo no se incluyó antes,continúe con el paso 3
2
1Para los modelos Ford Edge/Expedition2007, Explorer/Fusion/Mercury Milan2006-07, F-150 2004-07, Five hun-dred/Freestyle/Mustang/MercuryMontego 2005-07, Lincoln Mark LT2005-07 y Ford Super Duty 2008, cortey retire las lengüetas de montajetraseras de los soportes DIN dobles.a. Si su vehículo no se incluyó antes,continúe con el paso 2.
Continúe con el montaje del kit.
A
3A
3B
C
MONTAJE DEL KIT AT-581FD/AW-581FD
13
ACCESORIO PARA RADIO DIN DOBLE
Deslice el radio DIN doble en el con-junto de alojamiento del radio/soportey sujete el radio en el montaje usandolos tornillos suministrados con el radio.(Figura C)
4
*Nota: Asimismo, remítase a las instrucciones incluidas con el radio de posventa.
Coloque los soportes DIN dobles en el alojamiento del radio. Nota: La muesca delalojamiento debería estar en la parte superior. (Figuras 3A, 3B)
3
2Para los modelos FordEdge/Expedition 2007, Explorer 2006-07, Fusion 2006-07, Mustang 2007 ySuper Duty 2008, coloque los espaci-adores incluidos en la parte posteriorde las lengüetas de montaje del alo-jamiento del radio.a. Si su vehículo no se incluyó antes,continúe con el paso 3. (Figura A)
1Para los modelos Ford Edge/Expedition 2007, Explorer/Fusion/Mercury Milan 2006-07, F-150 2004-07, Five Hundred/Freestyle/Mustang/Mercury Montego 2005-07,Lincoln Mark LT 2005-07 y Super Duty 2008, corte y retire las lengüetas de montajetraseras de los soportes DIN doblesa.Si su vehículo no se incluyó antes, continúe con el paso 2.
3A
Continúe con el montaje del kit.
A
3B
C
MONTAJE DEL KIT AT-581FD/AW-581FD
LINCOLN NAVIGATOR 2007-2008
A
B
1
Retire (2) tornillos de 9/32 in de laparte inferior del panel de termi-nación de radio/control de clima.(Figura B)
Desconecte el terminal negativo de labatería, a fin de evitar un cortocir-cuito accidental.
3
Desenganche y retire el panel querodea la palanca de velocidades.(Figura A)
2
Desenganche y retire todo el panelque rodea el radio y que incluye loscontroles de clima. (Figura B)
4
Retire (4) tornillos de 9/32 in quesujetan el radio. Desenchufe y retireel radio.
5
Continúe con el montaje del kit.
12
DESMONTAJE DEL TABLERO AT-581FD/AW-581FD
11
LINCOLN MKX 2007-2009
A
B
C
Desconecte el terminal negativo de labatería, a fin de evitar un cortocir-cuito accidental.
1
Abra la tapa de la consola central, ydesenganche y retire el panel de termi-nación de la consola central que rodeala palanca de velocidades. (Figura A)
2
3
Desenganche y retire el panel de ter-minación central superior e inferiorcomo un conjunto. (Figura C)
4
Retire (4) tornillos de 9/32 in quesujetan el radio. Desenchufe y retireel radio.
5
Continúe con el montaje del kit.
Retire (2) tornillos Phillips del recipi-ente de almacenamiento y, luego,desenganche y retire el recipiente.(Figura B)
DESMONTAJE DEL TABLERO AT-581FD/AW-581FD
10
3
5
4
FORD SUPER DUTY 2008
A
Desconecte el terminal negativo de la batería,a fin de evitar un cortocircuito accidental.
1
Desenganche y retire el panel de salida dealimentación eléctrica y el panel en blancoen los lados izquierdo y derecho del panelde terminación del radio. (Figura A)
Retire los (2) tornillos de 9/32 in expuestosdetrás de los dos paneles que se retiraronen el paso 2.
Desenganche y retire todo el panel de termi-nación del radio, incluido el control del aireacondicionado y las rejillas de ventilación.
Retire (4) tornillos de 9/32 in quesujetan el radio.
Continúe con el montaje del kit.
2
DESMONTAJE DEL TABLERO AT-581FD/AW-581FD
FORD F SERIES SUPER DUTY 2005-2008
A
B
9
Desconecte el terminal negativo de labatería, a fin de evitar un cortocircuitoaccidental.
1
Quite a presión y retire todo el panelque rodea los controles del radio y declima. (Figura A)
2
Retire (4) tornillos de 9/32 in pararetirar el radio de fábrica. (Figura B)
3
Continúe con el montaje del kit.
DESMONTAJE DEL TABLERO AT-581FD/AW-581FD
FORD EXPLORER/EXPLORER SPORT TRAC 2006-2008MERCURY MOUNTAINEER 2006-2008
A
B
8
Desconecte el terminal negativo de labatería, a fin de evitar un cortocircuitoaccidental.
1
Abra la consola central y retire (2)tornillos Phillips y, luego, desen-ganche y retire todo el panel querodea la palanca de velocidades.(Figura A)
2
Retire el panel del tablero que rodeael radio para tener acceso a los tornil-los del radio de fábrica. (Figura B)
3
Continúe con el montaje del kit.
C
Retire (4) tornillos de 9/32 in pararetirar el radio de fábrica. (Figura B)
4
DESMONTAJE DEL TABLERO AT-581FD/AW-581FD
FORD FOCUS 2005-2007
A
B
7
Desconecte el terminal negativo de labatería, a fin de evitar un cortocircuitoaccidental.
1
Quite a presión y retire todo el panelque rodea los controles del radio y declima. (Figura A)
2
Retire (4) tornillos de 9/32 in pararetirar el radio de fábrica. (Figura B)
3
Continúe con el montaje del kit.
DESMONTAJE DEL TABLERO AT-581FD/AW-581FD
FORD FREESTAR 2004-2007MERCURY MONTEREY 2004-2007
A
B
6
Desconecte el terminal negativo de labatería, a fin de evitar un cortocircuitoaccidental.
1
Quite a presión y retire todo el panelque rodea los controles del radio y declima. (Figura A)
2
Retire (4) tornillos de 9/32 in pararetirar el radio de fábrica. (Figura B)
3
Continúe con el montaje del kit.
DESMONTAJE DEL TABLERO AT-581FD/AW-581FD
FORD FREESTYLE 2005-2007FORD TAURUS X 2008
A
B
5
Desconecte el terminal negativo de labatería, a fin de evitar un cortocircuitoaccidental.
1
Desenganche y retire todo el panelque rodea el radio y los controles delaire acondicionado.(Figure A)
2
Retire (4) tornillos de 9/32 in del radiopara retirarlo. (Figura B)
3
Continúe con el montaje del kit.
DESMONTAJE DEL TABLERO AT-581FD/AW-581FD
FORD FUSION 2006-2008MERCURY MILAN 2006-2008
A
B
4
Desconecte el terminal negativo de labatería, a fin de evitar un cortocircuitoaccidental.
1
Quite a presión y retire todo el panelque rodea los controles del radio y declima. (Figura A)
2
Retire (4) tornillos de 9/32 in pararetirar el radio de fábrica. (Figura B)
3
Continúe con el montaje del kit.
DESMONTAJE DEL TABLERO AT-581FD/AW-581FD
3
A
B
C
D E
FORD FIVE-HUNDRED 2005-2007/FORD TAURUS 2008MERCURY MONTEGO 2005-2007, MERCURY SABLE 2008
Desenganche y retire la terminaciónpequeña rectangular alrededor de lapalanca de velocidades. (Figura A)
2
Desenganche y retire todo el panel(incluidos los portavasos) que rodeanla palanca de velocidades. (Figura B)
3
Retire (2) tornillos de 9/32 in en laparte inferior del panel del radio cen-tral/de control de clima. (Figura C)
4
Retire (4) tornillos de 9/32 in delradio para retirarlo. (Figura E)
6
Desenganche y retire el panel cen-tral. (Figura D)
5
Continúe con el montaje final.
*Nota: Asimismo, remítase a las instrucciones incluidas con el radio de posventa.
Desconecte el terminal negativo de labatería, a fin de evitar un cortocircuitoaccidental.
1
DESMONTAJE DEL TABLERO AT-581FD/AW-581FD
2
A
B
C
D E
FORD MUSTANG 2005-2009
Retire el panel de terminación pequeñarectangular de la palanca de velocidades,
si corresponde.(Figure A)
2
Retire (4) tornillos de 9/32 in del radiopara retirarlo. (Figura E).
7
Retire (2) tornillos Phillips desde debajodel apoyabrazos central en la parte pos-terior del panel de terminación de lapalanca de velocidades (incluidos los por-tavasos). (Figura B)
3
Desenganche y retire el panel. (Figura B) 4
Desenganche y retire los (2) paneles determinación apilados centrales de loslados izquierdo y derecho de los con-troles del radio y de clima. (Figura C)
5
Retire (6) tornillos de 9/32 in del panelde terminación central que rodea loscontroles del radio y de clima y, luego,desenganche y retire el panel. (Figura D)
6
Continúe con el montaje final.
*Nota: Asimismo, remítase a las instrucciones incluidas con el
radio de posventa.
Desconecte el terminal negativo de labatería, a fin de evitar un cortocircuitoaccidental.
1
DESMONTAJE DEL TABLERO AT-581FD/AW-581FD
DESMONTAJE DEL TABLERO AT-581FD/AW-581FD
FORD F-150 2004-2008LINC0LN MARK LT 2005-2008FORD EXPEDITION 2007-2008
FORD EDGE 2007-2008
A
B
1
Desconecte el terminal negativo de labatería, a fin de evitar un cortocircuitoaccidental.
1
Quite a presión y retire todo el panelque rodea los controles del radio y declima. (Figura A)
2
Retire (4) tornillos de 9/32 in pararetirar el radio de fábrica. (Figura B)
3
Continúe con el montaje del kit.
INDICE
AT-581FD/AW-581FD
*Nota: Asimismo, remítase a las instrucciones incluidas con el radio de posventa.
Desmontaje del tablero
Ford Edge 2007-2008...................................................................................................................1
Ford F-150 2004-2008 / Expedition 2007-2008...........................................................................1
Lincoln Mark LT 2005-2008..........................................................................................................1
Ford Mustang 2005-2009.............................................................................................................2
Ford Five Hundred 2005-2007.....................................................................................................3
Mercury Sable 2008.....................................................................................................................3
Ford Taurus 2008..........................................................................................................................3
Mercury Montego 2005-2007......................................................................................................3
Ford Fusion 2006-2008................................................................................................................4
Mercury Milan 2006-2008.......................................................................................................... 4
Ford Freestyle 2005-2007............................................................................................................5
Ford Taurus X 2008 .....................................................................................................................5
Ford Freestar 2004-2007.............................................................................................................6
Mercury Monterey 2004-2007......................................................................................................6
Ford Focus 2005-2007.................................................................................................................7
Ford Explorer 2006-2008.............................................................................................................8
Ford Explorer Sport Trac 2006-2008............................................................................................8
Mercury Montaineer 2006-2008..................................................................................................8
Ford F Series Super Duty 2005-2008..........................................................................................9
Ford Super Duty 2008................................................................................................................10
Lincoln MKX 2007-2009 ............................................................................................................11
Lincoln Navigator 2007-2008.....................................................................................................12
Montaje del kit
Double DIN Radio Provision.........................................................................................................13
Stacked ISO Units Provision.......................................................................................................14
DIN Radio Provision with Pocket...............................................................................................15
ISO DIN Radio Provisionwith Pocket........................................................................................16
Montaje final ..........................................................................................................................17
Conocimiento es Poder Convierta su hobby en una carrera en Installer Institute, el líder educativo de la industria de dispositivos electrónicos portátiles.Regístrese en www.installerinstitute.com o llame al 800-354-6782 para obtener más información y empiece su nueva carrera hoy mismo.
AT-581FD/AW-581FD
�
HERRAMIENTAS REQUERIDAS :
����
� �
1-800-221-0932 ©COPYRIGHT 2001-2008 METRA ELECTRONICS CORPORATION
www.metraonline.com
APLICACIONES
FORDEdge 2007-2008/Expedition 2007-2008Explorer 2006-2008/Explorer Sport Trac 2006-2008F-150 2004-2008/Serie F 2005-2008Five-Hundred 2005-2007/Focus 2005-2007/FreeStar 2004-2007Freestyle 2005-2007/Fusion 2006-08Mustang 2005-2009/Super Duty 2008Taurus 2008/Taurus X 2008MERCURYMonterey 2004-2007/Milan 2006-2008Montego 2005-2007/Mountaineer 2006-2008Sable 2008LINCOLNMark LT 2005-2008Solo navegación de fábrica: MKX 2007-2009/Navigator 2007-2008
• Accesorio para radio DIN doble.• Accesorio para unidades ISO apiladas.• Accesorio para radio DIN con bolsillo.• Accesorio para radio DIN ISO con bolsillo.
Herramienta de corte • Herramienta para retirar paneles• Destornillador Phillips • Juego de soportes
A) Alojamiento del radio (unidades DIN dobles y DIN ISO apiladas) • B) Soportes DIN dobles • C) Espaciadores • D) (4) Tornillos • E) Alojamiento del radio • F) Soportes ISO • G) Placa de terminación.
COMPONENTES DEL KIT
CARACTERÍSTICAS DEL KIT
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA AT-581FD/AW-581FD