installation instructions for part...
TRANSCRIPT
INSTALLATION INSTRUCTIONS FOR PART 95-8202
APPLICATIONS
METRA. The World’s best kits.™ metraonline.com1-800-221-0932 © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
REV.
9/1
3/20
13
INST
95-8
202
CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the aftermarket radio.
• DoubleDINradioprovision• StackedISODINradioprovision
•A)DoubleDINtrimplate
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS(soldseparately)
WiringHarness:•70-1761Toyotaharness1987-up•70-8113Toyotaharness1987-up•TYT0-01Toyotaampharness2003-up
AntennaAdapter:•Notrequired
•Cuttingtool•Phillipsscrewdriver•Socketset•Grinder
TOOLS REQUIRED
Toyota/Scion multi-kit 2000-up95-8202
See application list inside
A
95-8202
Applications
2
Toyota Rav4..........................................................2001-2005MR2Spyder...............................................2000-2003Celica2000-2005Echo..........................................................2000-2005Highlander.................................................2001-2007Matrix........................................................2005-2008Matrix (with factory navigation)..................2009-20104Runner(excluding Limited).....................2003-2009Tundra.......................................................2003-2006Sequoia.....................................................2003-2007FJCruiser..................................................2007-upYaris..........................................................2007-upYaris..........................................................2012-2013
Scion FR-S..........................................................2013IQ..............................................................2012-2013TC.............................................................2005-upXA.............................................................2004-2006XB.............................................................2004-upXD.............................................................2008-up
Subaru BRZ...........................................................2013Forester (with SD based navigation)...........2009-2013
Dash Disassembly
– ToyotaRav42001-2005.............................................. 3
– ToyotaMR2Spyder2000-2003................................... 3
– ToyotaCelica2000-2005............................................ 4
– ToyotaEcho2000-2005.............................................. 4
– ToyotaHighlander2001-2007..................................... 5
– ToyotaMatrix2005-2008............................................ 5
– ToyotaMatrix2009-2010 (with factory navigation).......... 6
– Toyota4Runner2003-2009 (excluding Limited)..........6-7
– ToyotaTundra2003-2006........................................7-8
– ToyotaSequoia2003-2007......................................... 8
– ToyotaFJCruiser2007-up.......................................... 9
– ToyotaYaris2007-up................................................ 10
– ToyotaYaris2012-2013............................................ 10
– ScionFR-S2013....................................................... 11
– ScionIQ2012-2013.................................................. 11
– ScionXA2004-2006................................................. 12
– ScionXB2004-2007................................................. 12
– ScionXB2008-up..................................................... 13
– ScionTC2005-2010................................................. 13
– ScionTC2011-up..................................................... 14
– ScionXD2008-up..................................................... 14
– SubaruBRZ2013...................................................... 15
– SubaruForester2009-2013(with SD based navigation).... 15
Kit Assembly
– KitPreparation.......................................................... 16
– DoubleDINradioprovision........................................ 16
– StackedISODINradioprovision................................ 17
Table of Contents
3
Dash Disassembly 95-8202
1. Unclipandremovesidepanelfrombothsidesofradioandclimatecontrols.(FigureA)
2. Remove(4)Phillipsscrewssecuringtheradio/climatecontroltrimpanel.(FigureB)
3. Remove(4)10mmboltssecuringtheradio.(FigureC)
4. Unplugandremoveradio.
5. Removefactorybracketsfromradio.Retainbracketsforuseduringkitassembly.
Continue to kit assembly
Toyota Rav4 2001-2005
(Figure C)
1. Unsnapthelowertrimpiecefromeachsideofthedashconsoleandremove(2)Phillipsscrewsexposedineachcavity.Removetheuppertrimpiecefromeachsideoftheconsole.(FigureA)
2. Removetheclimatecontrolknobsand(2)Phillipsscrewsexposed.Removetheclimatecontroltrimbezel.(FigureA)
3. Removetheashtrayand(1)10mmboltexposed.Uncliptheashtraytrimbezelandremove.(FigureA)
4. Uncliptheradiotrimbezel,remove(4)Phillipsscrewssecuringtheunitanddisconnectthewiring.
5. Removefactorybracketsfromradio.Retainbracketsforuseduringkitassembly.
Continue to kit assembly
Toyota MR2 Spyder 2000-2003
(Figure A)
(Figure B)
(Figure A)
4
Dash Disassembly 95-8202
1. Unclipandremovethegearshiftertrimbezelandremove(2)Phillipsscrewsexposedbelowtheclimatecontrols.(FigureA)
2. Pulloffclimatecontrolknobsandremove(2)Phillipsscrewsexposed.(FigureA)
3. Uncliptheclimatecontrol/factoryradiotrimbezelandremove.(FigureA)
4. Remove(4)10mmscrewssecuringthefactoryradioanddisconnectthewiring.
5. Removefactorybrackets fromradio.Retainbracketsforuseduringkitassembly.
Continue to kit assembly
Toyota Celica 2000-2005 Toyota Echo 2000-2005
(Figure A)
1. Removetheclimatecontrolknobsand(2)Phillipsscrewsexposed.Unclipandremovetheclimatecontroltrimbezel.Depressthesideclipssecuringtheclimatecontrolpanelandmovethepaneltoaccess(2)Phillipsscrewsfromthetopofthefactoryradiobrackets. (FigureA)
2. Removetheashtray.Unclipandremovetheradiotrimbezel.Remove(2)Phillipsscrewsfromthebottomoftheradiobracketsanddisconnectthewiring.
3. Removefactorybracketsfromradio.Retainbracketsforuseduringkitassembly.
Continue to kit assembly
(Figure A)
5
Dash Disassembly 95-8202
1. Pullandremovedashpanelfromradioandclimatecontrols.Tip:Thereare8clips.(FigureA)
2. Remove(6)10mmboltsfromradioandclimatecontrolsassembly.(FigureB)
3. Removeassemblyanddisconnectthewiring.
4. Remove(8)Phillipsboltsand(4)Phillipsscrewstoseparatebracketsfromassembly.Retainbracketsforuseduringkitassembly.(FigureC)
Continue to kit assembly
Toyota Highlander 2001-2007
(Figure C)
1. Unclipthebottomedgeoftheradiotrimpanelthenliftupandouttoremove.(FigureA)
2. Remove(4)10mmboltssecuringthefactoryradio.(FigureB)
Continue to kit assembly
Toyota Matrix 2005-2008
(Figure B)
(Figure A)
(Figure A)
(Figure B)
SCAN
SEEKTRACK
TUNE
AM FM1 FM2 DISK
6
Dash Disassembly 95-8202
1. UnclipandremovetheradiotrimpanelincludingtheA/Cvent.(FigureA)
2. Remove(4)10mmboltssecuringthefactoryradio.Unplugandremovetheradio.(FigureB)
Continue to kit assembly
Toyota Matrix 2009-2010 (with factory navigation)
1. Unsnapandremovetrimfromaroundshifter.
2. Unsnapandremovetrimcoversfromaroundcenterconsolepocketedgeatfrontandrearofconsole.
3. Unsnapandremovecenterconsolecover.(FigureA)
4. Unsnaptrimringfromaroundignitionkeycylinder.
5. Remove(1)10mmboltfrombottomrightofpanelbelowsteeringcolumn.Unsnappanelandpullawaytogainaccessbehindpanel.(FigureB)
6. Remove(1)10mmboltonbottomleftofcenterpanelbehindpanelbelowsteeringcolumn.(FigureB)
Continued on next page (Figure B)
Toyota 4 Runner 2003-2009 (excluding Limited)
(Figure A)
(Figure B)
A/C
0
1 2 3
45
(Figure A)
PASSENGER
SECURITY
A/C
0
1 2 3
45
7
Dash Disassembly 95-8202
7. Remove(1)10mmboltbeneathclimatecontrolbehindpocketdoor.Unsnapandremoveclimatecontrol.(FigureC)
8. Remove(2)10mmboltsbeneathradiobehindclimatecontrols.
9. Unsnapandremoveentirecenterpanelaroundradio.(FigureD)
10.Remove(2)10mmboltssecuringradio.
11.Unplugandremoveradio.
12.Removefactorybracketsfromradio.Retainbracketsforuseduringkitassembly.
Continue to kit assembly
(Figure C)
Toyota 4 Runner 2003-2009 (excluding Limited)
(Figure B)
1. Removethe(3)climatecontrolknobsbypullingstraightoutward.(FigureA)
2. Remove(3)Phillipsscrewsfrombehindknobs.(FigureA))
3. Positionventsfacingupwardandremove(1)PhillipsscrewfromeachA/Cvent.(FigureB)
Continued on next page
(Figure B)
Toyota Tundra 2003-2006
(Figure A)
8
Dash Disassembly 95-8202
4. Unclipandremoveentiretrimpanel.(FigureC)
5. Remove(4)10mmboltstoremoveradio.(FigureD)
6. Unplugandremoveradio.
7. Removefactorybracketsfromradio.Retainbracketsforuseduringkitassembly.
Continue to kit assembly
(Figure D)
Toyota Tundra 2003-2006
(Figure C)
Toyota Sequoia 2003-2007
1. Positionventsfacingupwardandremove(1)PhillipsscrewfromeachA/Cvent.(FigureA)
2. Unclipandremoveentireradiotrimpanelincludingclimatecontrols.(FigureB)
3. Remove(4)10mmboltstoremoveradio.(FigureC)
4. Unplugandremoveradio.
5. Removefactorybracketsfromradio.Retainbracketsforuseduringkitassembly.
Continue to kit assembly
(Figure C)(Figure A)
(Figure B)
9
Dash Disassembly 95-8202
1. RemovetwoPhillipsscrewsfrombottompartofsidetrimpanels.(FigureA)
2. Usingapanelremovaltool,carefullyremovethesidetrimpanels.(FigureB)
3. Remove(2)Phillipsscrewsfromradiotrimpanel.(FigureC)
4. Usingpanelremovaltool,carefullyremoveradiotrimpanel.(FigureD)
5. Remove(4)10mmboltssecuringtheradio.
6. Unplugandremoveradio.
7. Removefactorybracketsfromradio.Retainbracketsforuseduringkitassembly.
Continue to kit assembly (Figure C)
Toyota FJ Cruiser 2007-up
(Figure A)
(Figure D)
(Figure B)
(Figure B)
(Figure A)
10
Dash Disassembly 95-8202
1. UnclipthebottomtrimpanellocatedunderneaththeA/Ccontrols.(FigureA)
2. UnclipthetwosidetrimpanelsthatsurroundtheA/Ccontrolsandradio.(FigureA)
3. UncliptheInstrumenttrimPanelsurroundingthespeedometerandgauges.(FigureB)
4. Uncliptheradio/ACventstrimpanel.(FigureB)
5. Remove(4)Phillipsscrewssecuringradio.(FigureC)
6. Unplugandremoveradio.
7. Remove(4)Phillipsscrewssecuringfactorybracketsoneachsideoftheradioandremovebrackets.Retainbracketsforuseduringkitassembly.(FigureD)
Continue to kit assembly
Yaris 2007-up
(Figure D)
(Figure C)
1. UnclipandremoveentirepanelincludingA/Cventonpassengersideofdash.(FigureA)
2. Unclipandremovethepanelfromaroundtheradio.(FigureB)
3. Removefour10mmboltsandremovefactoryradio.(FigureC)
Continue to kit assembly
Yaris 2012-2013
(Figure B)
(Figure A)
11
Dash Disassembly 95-8202
Scion FR-S 2013
1. Unclipandremovetheclimatecontrolpanel.(FigureA)
2. Unclipandremovethepanelfromaroundtheradio.(FigureB)
3. Removefour10mmboltsandremovefactoryradio.(FigureC)
Continue to kit assembly
Scion IQ 2012-2013
1. Unclipandremovethepanelfromaroundtheradio.(FigureA)
2. Removefour10mmboltsandremovefactoryradio.(FigureB)
Continue to kit assembly
(Figure A)
(Figure B)
(Figure C)
(Figure A)
(Figure B)
12
Dash Disassembly 95-8202
Scion XA 2004-2006
(Figure B)
(Figure A)
(Figure D)
(Figure C)
1. Pulloutwardonthe(3)climatecontrolknobsandremove.(FigureA)
2. Remove(2)Phillipsscrewsfrombehindtheoutertwoclimateknobs.(FigureB)
3. Unsnapandremovethetrimpiecesoneachsideoftheclimatecontrol/ashtray/pocketassembly.(FigureC)
4. Remove(2)Phillipsscrewsfromthebottomoftheclimatecontrol/radiotrimpanelandunsnapandremovetheentirepanel.(FigureD)
5. Remove(4)Phillipsscrewstoremovethefactoryradio.
6. Removefactorybracketsfromradio.Retainbracketsforuseduringkitassembly.
Continue to kit assembly
1. Pulloutwardonthe(3)climatecontrolknobsandremove.(FigureA)
2. Remove(2)Phillipsscrewsfrombehindtheouter(2)knobs.(FigureB)
3. Unsnapandremovetheentirepanelsurroundingtheclimatecontrolsandtheradio.(FigureC)
4. Remove(4)Phillipsscrewstoremovethefactoryradio.
5. Removefactorybracketsfromradio.Retainbracketsforuseduringkitassembly.
Continue to kit assembly
Scion XB 2004-2007
(Figure A) (Figure B)
13
Dash Disassembly 95-8202
Scion XB 2008-up Scion TC 2005-2010
1. UnclipandremovethetrimpanelaroundtheradioincludingtheA/Cvents.(FigureA)
2. Unclipandremovethetrimpanelatthebottomedgeofthedashcavity.(FigureB)
3. Remove(4)10mmboltssecuringtheradio.(FigureC)
Continue to kit assembly
(Figure C)
(Figure B)
(Figure A)
1. Unsnaptrimfromaroundshifter(notnecessarytoberemoved).(FigureA)
2. Unclipandremovepanelfromaroundradio(includingclimatecontrolsandradiodoor).(FigureB)
3. Remove(2)10mmnutsfromthetopmountinglocationsand(2)10mmboltsfromthebottommountinglocationstoremovetheradio.(FigureC)
4. Removefactorybracketsfromradio.Retainbracketsforuseduringkitassembly.
Continue to kit assembly
(Figure C)
(Figure B)
(Figure A)
14
Dash Disassembly 95-8202
Scion TC 2011-up
1. Unclipradiotrimpanel.Unplugandremovepanel.(FigureA)
2. Remove(4)Phillipsscrewssecuringtheradio.Unplugandremoveradio.(FigureB)
3. Removefactorybracketsfromradio.Retainbracketsforuseduringkitassembly.(FigureC)
Continue to kit assembly
Scion XD 2008-up
1. Unclipandremovetheradiotrimpanel.(FigureA)
2. Remove(4)10mmboltssecuringtheradio.(FigureB)
3. Removefactorybracketsfromradio.Retainbracketsforuseduringkitassembly.
Continue to kit assembly
(Figure B)
(Figure A)
(Figure A) (Figure B)
(Figure C)
15
Dash Disassembly 95-8202
Subaru BRZ 2013
1. UnclipandremovethetrimpanelsurroundingthefactoryradioincludingtheA/Cvents.(FigureA)
2. Remove(4)Phillipsscrewssecuringtheradio.Unplugandremovetheradio.(FigureB)
Continue to kit assembly
Subaru Forester (with SD based navigation)
2009-20131. Unclipandremovethepanelfrom
aroundtheradio.(FigureA)
2. Removefour10mmboltsandremovefactoryradio.(FigureB)
Continue to kit assembly
(Figure A)
(Figure B)(Figure B)
(Figure A)
1 2 3 4 5
PTY/CAT MENU
CD/AUX
FM/AM
SAT
TEXT
RPT
SCAN
TUNE/TRACK/CHVOLUME
16
Kit Preparation
1. Locatethefactorywiringharnessinthedash.MetrarecommendsusingthepropermatingadapterfromMetraorAXXESS.Re-connectthenegativebatteryterminalandtesttheunitforproperoperation.
2. Attachthefactorymountingbracketsandthe95-8202doubleDINtrimplatestothedoubleDINradiowiththescrewssuppliedwiththeunit.(FigureB)
NOTE: Remove locating pins from factory brackets with grinder.
4. Reassembledashinreverseorderofdisassembly.
Double DIN radio provision
(Figure A)
NOTE: For all Scion TC and XA you will need to cut off the front upper section of the Double DIN trim plates, as shown by dotted lines labeled “A” in (Figure A).
For the 2001-2005 Toyota Rav4, 2001-2007 Toyota Highlander, 2003-2006 Toyota Tundra and 2003-2007 Toyota Sequoia you will need to cut off the rear section of the double DIN trim plates, as shown by dotted lines labeled “B” in (Figure A).
For all other vehicles skip to Step 1.
(Figure A)
A
A
B
B
Kit Assembly 95-8202
Factory brackets may differ
17
Kit Assembly 95-8202
Stacked ISO DIN radio provision Notes
1. Locatethefactorywiringharnessinthedash.MetrarecommendsusingthepropermatingadapterfromMetraorAXXESS.Re-connectthenegativebatteryterminalandtesttheunitforproperoperation.
2. Attachthefactorymountingbracketsandthe95-8202doubleDINtrimplatestothestackedISODINradioswiththescrewssuppliedwiththeunits.(FigureA)
NOTE: Remove locating pins from factory brackets with grinder.
4. Reassembledashinreverseorderofdisassembly.
(Figure A)
Factory brackets may differ
18
Notes
19
Notes
INSTALLATION INSTRUCTIONS FOR PART 95-8202
METRA. The World’s best kits.™ metraonline.com1-800-221-0932 © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
REV.
9/1
3/20
13
INST
95-8
202
KNOWLEDGE IS POWEREnhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
Metra recommends MECP certified technicians