installation guide unloader ˜ange valve type evrf 3-w (nc)€¦ · dan fo ss a32f915.10...

1
Danfoss A32F915.10 Installation guide Unloader flange valve Type EVRF 3-W (NC) © Danfoss A/S (AC-MCI / sw), 2014-01 DKRCC.PI.BH0.C1.02 / 520H8456 1 032R9510 032R9510 Media temperature: Min. : t min. = -40 °C (-40 °F) Max. : t max. = 130 °C (265 °F) Ambient temperature: Min. : t min. = -40 °C (-40 °F) Max. : t max. = 80 °C (175 °F) Max. working pressure (PS / MWP): 45.2 bar (405 psig) Max. operating diff. pressure (MOPD): 25 bar (360 psi) 1.4Nm (1ft – lb) 45±5Nm (33±4ft – lbs) Gasket to be lubricated with oil NC = Normally closed. With coil de-energized, port “In“ is closed and port “A” is open to “Out“. In A A Out In Out

Upload: others

Post on 02-Feb-2021

4 views

Category:

Documents


0 download

TRANSCRIPT

  • Dan

    foss

    A32

    F915

    .10

    Installation guideUnloader flange valveType EVRF 3-W (NC)

    © Danfoss A/S (AC-MCI / sw), 2014-01 DKRCC.PI.BH0.C1.02 / 520H8456 1

    032R

    9510

    032R

    9510Media temperature:

    Min. : tmin. = -40 °C (-40 °F)Max. : tmax. = 130 °C (265 °F)

    Ambient temperature: Min. : tmin. = -40 °C (-40 °F)Max. : tmax. = 80 °C (175 °F)

    Max. working pressure (PS / MWP): 45.2 bar (405 psig)

    Max. operating diff. pressure (MOPD): 25 bar (360 psi)

    1.4Nm(1ft – lb)

    45±5Nm (33±4ft – lbs)Gasket to be lubricated with oil

    NC = Normally closed.With coil de-energized,port “In“ is closed and port “A” is open to “Out“.

    In A

    A

    Out

    In

    Out