Installation and Operation Manual for mobile GInfo (mGInfo) on iOS Platform

Version 3.3

Slope Safety Division

Aug 2018

Any feedback and comments on the use of the mGInfo should be provided to GE/ES3, Slope Safety Division

Procedures for installing mobile GInfo (mGInfo) app in IOS-based devices

A. REGISTRATION

Only registered IOS-based devices will be allowed to run the mGInfo application. Afterfirst installation (see Section B for details) of the mGInfo, please launch the application and carry out the on-line registration as follows (re-registration is not required when updated version of mGInfo is installed, unless the settings of your mobile device has been changed):

In the Login page, click the 'Registration' icon and input 'CEDD Post' and 'Name' for on-line registration. Anonymous registration will not be entertained. Please then press the 'Submit' button. Registration will normally be activated within one working day.

'Login Page'

Click here for on-line registration

B. INSTALLATION

1. For IOS-based devices provided under the Workplace Mobile Services (WMS) by theDepartment, the mGInfo can be installed from the McAfee EMM which should have been pre-installed.

(a) Locate the McAfee EMM and start the program

McAfee EMM

(b) Select “Recommended Applications” and then GInfoMap for installation

Remarks: Under normal circumstance, there is no need to uninstall the mGInfo if it has previously been installed. You would try to uninstall the previous mGInfo if problems are encountered, otherwise, please seek technical support from CSU or SS Division.

Click GInfoMap to install the app

Select “Recommended Applications”

2. For installing the mGInfo on the IOS-based devices which are not provided under WMS bythe Department,

(a) Download the app from the GInfo portal, then save the file to your computer and connect your device to iTunes (Not supported in version 12.7 or above). http://ginfo.cedd.hksarg/arcgisweb/mobileapps/mobileapps.aspx

(b) Syncing the apps to the IOS-based devices via the iTunes

(ii) Please start the iTunes (you are recommended to update to the latest version ) in your PC, click the icon at the upper left corner of the iTunes, select “File” and then “Add files to Library”, select the files recently downloaded from the GInfo portal.

(c) In your iTunes, go to your device and click the app tab.

(i) Check that the GInfoMap app appears in your list then select the “Install”.(ii) Click sync or “套用”

iTunes 12

http://ginfo.cedd.hksarg/arcgisweb/mobileapps/mobileapps.aspx

(d) Configuration of Device Management

(i) Select the “CEDD” developer under the IOS Settings > General > Device Management

(ii) Trust the certificate issued by CEDD Developer.

(e) Turn off “Limit AD Tracking” feature under the IOS Settings > Privacy > Advertising

Operation Manual for mobile GInfo (mGInfo) on IOS-based Device The operation is identical for iPhone, iPad mini and iPad

1. Logging in (a) In the 'Login Page', type ‘guest’ as the password and click 'Login' icon to login. (b) In the 'Module Home Page', tap either “GInfoMap”, “Landslip Warning System” or “Enhanced

ILIS” to start the mGInfo. 'Login Page' 'Module Home Page'

Tap to run the App Modules

Remarks: Only some key operations/functions are given in this operation manual. Users are encouraged to explore the full functionalities through practical usage. Any feedback/suggestions/ comments are very welcomed.

2. Function keys in GInfoMap module

Use GPS to locate the position of the device To 'Options Page'

Turn on/off layers in the schema

Query Erase selection or graphic layer

Tap here for full extent of map

Tap to expand /close options

To 'Module Home Page'

3. Options Page

Tap to select ortho photo, geology map or land lot overlays.

Tap to return to map

Tap to change Base Map Language (Chinese/English)

Tap to select Project Schema

Real Time Image for Granted Users

Tap to select Raingauge overlay

4. Options - Overlaps (Ortho Photo, Geological Map and Land Lots) (a) 'Ortho Photo' (b) 'Geological Map'

(c) ' Land Lot'

Tap to return to 'Options Page'

Drag the bar to change the transparency of the overlay

Tap to select Geological Map

Drag the bar to change the transparency of the overlay

Tap to select Land Lot

4. Project schema

Tap to select Project Schema

Tap to return to 'Options Page'

5. Showing underlying layers in a schema (Default setting only turns the feature layer on)

Tap layer’s name to turn it on/off

6. Searching of slopes, street, building, lamp post, lot number and coordinates (English and Chinese is allowed for searching street and building name)

Result:

Tap to query by feature no.

7. Selecting feature

Tap and hold until a magnifier appears. The cross indicates the current selection position. Release the tap action and the selection of feature will base on the location of the cross.

8. Results of feature selection

Tap to show the feature on map

Tap to show details of the feature

9. Landslip Warning System Module

Tap to refresh data

Tap to show other rainstorms-related warnings (e.g. Landslip Warning, Black, Red and Amber Rainstorm Warning, Special announcement on flooding in the Northern New Territories)

10. Real-time rainfall

Tap to show the rainfall data in table form

Tap to show the picture in larger format

11. Radar and Satellite images

Tap to show the picture in larger format

12. Landslip Warning Curve

13. Forecast Rainfall (1-hour and 3-hour forecasts)

14. Landslip Warning Status

Consultation, Alert and Landslip Warning Level will appear depending on the rainfall and predicted number of landslides

Check whether cancellation criteria have been met (after issue of Landslip Warning)

Date and time of the rainfall data fetched

Forecast rainfall from HKO

Highest 24 hours rainfall will appear first

Tap to show more details of rainfall level for raingauge locations

15. Natural Terrain Landslip Alert

Zonation for computing natural terrain landslide risks

Forecast based on HKO data on every 12 minutes for each zone

Date and time of the rainfall data fetched

16. Enhanced ILIS - Summary Page

Tap to show the reported incidents on map

To Search Incident Page

17. Enhanced ILIS - Search Incident Page

Filtering criteria

Tap to start searching landslides based on filtering criteria

Filtering result, tap to get details of landslide

18. Enhanced ILIS - Map Page

Use GPS to locate the position of the device

Tap here for full extent of map

Tap to identify landslide record

Turn on/off layers in the schema

Query Tap to expand /close options

Erase selection or graphic layer

Raingauge and LandLot Options

Switch Languages

19. Identify landslide on map

Tap to get incident details

20. Details of selected landslide

Show the selected Incident on map

Tap to view the related documents & photos

Tap to view the inspection details