U.S. Patent No. 8,856,780

20171101

REVISION DATE

FT-RSA-MA3-[FT-DC2-S]FIRMWARE

FT-DC2-SHARDWARE

ADS-USB (OPTIONAL)ADS-WLM-AN1/ADS-WLM-AP1 (OPTIONAL)DRONE MOBILE DR-2000 (OPTIONAL)COMPATIBLE RF-KIT (OPTIONAL)

ACCESSORIES

DOCUMENT NUMBER

2014-2018 MAZDA 3 HATCHBACK PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2017

INSTALL GUIDE

NOTICE

The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

T001_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

AB

C

PAGE 2 OF 9

U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Hatchback PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

!

1

1

2

MS1

VS2

VS1

VS4

VS3

T001_H

1

8

2

9

3

10

4

11

5

12

6

13

7

14

2 31 4 65

MS2

2

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

T-HARNESS / WIRING DIAGRAM - 1 OF 1

M5

M4

M2

M3

OPTIONAL

INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE

SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,

FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.

PARKING LIGHT 2 (-) GREEN - 04

PARKING LIGHT 1 (-) YELLOW - 03

START STOP UNIT, UNDER STEERING COLUMN (A)

1

1

2

CLOCK SPRING (B)

PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)

2020

010102020303

1212

0303

04040505060607070808090910101111

12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT

01010202

040405050606070708080909

1111

131314141515161617171818

010102020303040405050606

1919

GRAY/RED•BLUE DOTGRAY/RED•BLUE DOT

GRAY•BLUE DOTGRAY•BLUE DOTGRAY/BLACK•BLUE DOTGRAY/BLACK•BLUE DOT

09091010

(SWITCH SIDE)

(CONNECTOR SIDE)

01010202030304040505060607 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT0808

RELAY

1: WHITE

1: WHITE

2: WHITE

2: VEHICLE HARNESS

1: VEHICLE HARNESS

HORN (-) BLUE - 01

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HOOD SWITCH

!

M3

M2M5M4

PAGE 3 OF 9

U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Hatchback PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

T001_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

C

B

PAGE 4 OF 9

U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Hatchback PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

!

8 77 6 5 4 3 2 110 9

20212223 14 131819

12 11

17 16 1524

2

18

3

19

1

17

9

25

10

26

4

20

11

27

8

24

6

22

7

23

5

21

12

28

13

29

14

30

15

31

16

32

T001_W

1

8

2

9

3

10

4

11

5

12

6

13

7

14

2 31 4 65

1

1

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT01 GREEN•BLACK DOT02 BLUE•BLACK DOT02 BLUE•BLACK DOT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT - PARKING LIGHT 1 (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT 1 (-) OUTPUT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - PTS (-) OUTPUT11 GRAY/RED - PTS (-) OUTPUT12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - KEYLESS (DATA)13 GREEN/RED - KEYLESS (DATA)14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN - ACCESSORY (+) IN/OUT15 BROWN - ACCESSORY (+) IN/OUT16 ORANGE/BLACK16 ORANGE/BLACK17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE - STARTER (+) OUTPUT18 PURPLE - STARTER (+) OUTPUT19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE02 WHITE/BLACK•BLUE DOT - IGNITION (+)02 WHITE/BLACK•BLUE DOT - IGNITION (+)

04 WHITE/RED•BLUE DOT - IGNITION (+)04 WHITE/RED•BLUE DOT - IGNITION (+)05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT

GROUND (-) BLACK - 13

ACCESSORY (+) BROWN - 14

KEYLESS (DATA) LTBLUE - 09

IGNITION (+) PURPLE - 17

CANH (DATA) WHITE - 07

CANL (DATA) RED - 08

IGNITION (+) LTGREEN - 10

12 (+) YELLOW - 12

PTS (-) LTBLUE - 17

STARTER (+) GREEN - 23

START STOP UNIT, UNDER STEERING COLUMN (A)

1: WHITE

2: WHITE

1 2

03 GRAY/RED•BLUE DOT - PARKING LIGHT 2 (-) CONNECTOR SIDE03 GRAY/RED•BLUE DOT - PARKING LIGHT 2 (-) CONNECTOR SIDE

CLOCK SPRING (B)

HORN (-) BLUE - 0110 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

PARKING LIGHT 2 (-) GREEN - 04

PARKING LIGHT 1 (-) YELLOW - 03

1

PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)

1: WHITE

INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE

SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,

FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.

HOOD SWITCH

!

M3

M2M5M4

PAGE 5 OF 9

U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Hatchback PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

>>

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

04

ENGINE

START

STOP

STOP ACC ON STARTSTOP

05

06

07

08

ENGINE

START

STOP

STOP ACC ON STARTON

09

10

11

ENGINE

START

STOP

STOP ACC ON STARTSTOP

>>

12

ENGINE

START

STOP

STOP ACC ON STARTSTART

13

14

15

16

MODULE PROGRAMMING PROCEDURE - 1 OF 1

WARNING: All vehicle doors must be closed

and locked prior to remote start sequence.

Set ignition to ON position.

Wait, LED 1 will turn solid RED to confirm that

the ignition is ON.

Wait 10 seconds, LED 1 will flash GREEN

rapidly.

Set ignition to OFF position.

WARNING: Disconnect power last. Disconnect

module from vehicle.

Connect module to computer and proceed

with extended programming.

Connect power first. Connect module to

vehicle.

Set ignition to ON position.

Wait, LED 1 will turn solid RED to confirm that

the ignition is ON.

Wait, LED 1 will turn solid GREEN for 2

seconds.

Set ignition to OFF position.

If vehicle is equipped with power liftgate: open

and close the power liftgate with OEM keyfob.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming

button.

Release the brake pedal.

Wait, LED 2 will flash GREEN. Module

Programming Procedure completed.

PAGE 6 OF 9

U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Hatchback PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

>>

01

02

03

04

05

06

>>

TAKEOVER PROCEDURE - 1 OF 1

All vehicle doors must be closed and locked

prior to remote start sequence.

Time restriction. Complete steps 2 to 5 within

45 seconds.

Press unlock on OEM or aftermarket remote

or request switch.

Open driver door and enter vehicle.

Close driver door.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in

vehicle engine shutdown.

PAGE 7 OF 9

U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Hatchback PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once

[1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 8 OF 9

U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Hatchback PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 9 OF 9

U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Hatchback PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

U.S. Patent No. 8,856,780

20171101

REVISION DATE

FT-RSA-MA3-[FT-DC2-S]FIRMWARE

FT-DC2-SHARDWARE

ADS-USB (OPTIONAL)ADS-WLM-AN1/ADS-WLM-AP1 (OPTIONAL)DRONE MOBILE DR-2000 (OPTIONAL)COMPATIBLE RF-KIT (OPTIONAL)

ACCESSORIES

DOCUMENT NUMBER

2014-2018 MAZDA 3 SEDAN PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2017

INSTALL GUIDE

NOTICE

The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

T001_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

AB

C

PAGE 2 OF 9

U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Sedan PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

!

1

1

2

MS1

VS2

VS1

VS4

VS3

T001_H

1

8

2

9

3

10

4

11

5

12

6

13

7

14

2 31 4 65

MS2

2

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

T-HARNESS / WIRING DIAGRAM - 1 OF 1

M5

M4

M2

M3

OPTIONAL

INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE

SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,

FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.

PARKING LIGHT 2 (-) GREEN - 04

PARKING LIGHT 1 (-) YELLOW - 03

START STOP UNIT, UNDER STEERING COLUMN (A)

1

1

2

CLOCK SPRING (B)

PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)

2020

010102020303

1212

0303

04040505060607070808090910101111

12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT

01010202

040405050606070708080909

1111

131314141515161617171818

010102020303040405050606

1919

GRAY/RED•BLUE DOTGRAY/RED•BLUE DOT

GRAY•BLUE DOTGRAY•BLUE DOTGRAY/BLACK•BLUE DOTGRAY/BLACK•BLUE DOT

09091010

(SWITCH SIDE)

(CONNECTOR SIDE)

01010202030304040505060607 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT0808

RELAY

1: WHITE

1: WHITE

2: WHITE

2: VEHICLE HARNESS

1: VEHICLE HARNESS

HORN (-) BLUE - 01

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HOOD SWITCH

!

M3

M2M5M4

PAGE 3 OF 9

U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Sedan PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

T001_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

C

B

PAGE 4 OF 9

U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Sedan PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

!

8 77 6 5 4 3 2 110 9

20212223 14 131819

12 11

17 16 1524

2

18

3

19

1

17

9

25

10

26

4

20

11

27

8

24

6

22

7

23

5

21

12

28

13

29

14

30

15

31

16

32

T001_W

1

8

2

9

3

10

4

11

5

12

6

13

7

14

2 31 4 65

1

1

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT01 GREEN•BLACK DOT02 BLUE•BLACK DOT02 BLUE•BLACK DOT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT - PARKING LIGHT 1 (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT 1 (-) OUTPUT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - PTS (-) OUTPUT11 GRAY/RED - PTS (-) OUTPUT12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - KEYLESS (DATA)13 GREEN/RED - KEYLESS (DATA)14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN - ACCESSORY (+) IN/OUT15 BROWN - ACCESSORY (+) IN/OUT16 ORANGE/BLACK16 ORANGE/BLACK17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE - STARTER (+) OUTPUT18 PURPLE - STARTER (+) OUTPUT19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE02 WHITE/BLACK•BLUE DOT - IGNITION (+)02 WHITE/BLACK•BLUE DOT - IGNITION (+)

04 WHITE/RED•BLUE DOT - IGNITION (+)04 WHITE/RED•BLUE DOT - IGNITION (+)05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT

GROUND (-) BLACK - 13

ACCESSORY (+) BROWN - 14

KEYLESS (DATA) LTBLUE - 09

IGNITION (+) PURPLE - 17

CANH (DATA) WHITE - 07

CANL (DATA) RED - 08

IGNITION (+) LTGREEN - 10

12 (+) YELLOW - 12

PTS (-) LTBLUE - 17

STARTER (+) GREEN - 23

START STOP UNIT, UNDER STEERING COLUMN (A)

1: WHITE

2: WHITE

1 2

03 GRAY/RED•BLUE DOT - PARKING LIGHT 2 (-) CONNECTOR SIDE03 GRAY/RED•BLUE DOT - PARKING LIGHT 2 (-) CONNECTOR SIDE

CLOCK SPRING (B)

HORN (-) BLUE - 0110 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

PARKING LIGHT 2 (-) GREEN - 04

PARKING LIGHT 1 (-) YELLOW - 03

1

PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)

1: WHITE

INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE

SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,

FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.

HOOD SWITCH

!

M3

M2M5M4

PAGE 5 OF 9

U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Sedan PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

>>

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

04

ENGINE

START

STOP

STOP ACC ON STARTSTOP

05

06

07

08

ENGINE

START

STOP

STOP ACC ON STARTON

09

10

11

ENGINE

START

STOP

STOP ACC ON STARTSTOP

>>

12

ENGINE

START

STOP

STOP ACC ON STARTSTART

13

14

15

16

MODULE PROGRAMMING PROCEDURE - 1 OF 1

WARNING: All vehicle doors must be closed

and locked prior to remote start sequence.

Set ignition to ON position.

Wait, LED 1 will turn solid RED to confirm that

the ignition is ON.

Wait 10 seconds, LED 1 will flash GREEN

rapidly.

Set ignition to OFF position.

WARNING: Disconnect power last. Disconnect

module from vehicle.

Connect module to computer and proceed

with extended programming.

Connect power first. Connect module to

vehicle.

Set ignition to ON position.

Wait, LED 1 will turn solid RED to confirm that

the ignition is ON.

Wait, LED 1 will turn solid GREEN for 2

seconds.

Set ignition to OFF position.

If vehicle is equipped with power liftgate: open

and close the power liftgate with OEM keyfob.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming

button.

Release the brake pedal.

Wait, LED 2 will flash GREEN. Module

Programming Procedure completed.

PAGE 6 OF 9

U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Sedan PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

>>

01

02

03

04

05

06

>>

TAKEOVER PROCEDURE - 1 OF 1

All vehicle doors must be closed and locked

prior to remote start sequence.

Time restriction. Complete steps 2 to 5 within

45 seconds.

Press unlock on OEM or aftermarket remote

or request switch.

Open driver door and enter vehicle.

Close driver door.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in

vehicle engine shutdown.

PAGE 7 OF 9

U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Sedan PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once

[1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 8 OF 9

U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Sedan PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 9 OF 9

U.S. Patent No. 8,856,780 2014-2018 Mazda 3 Sedan PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

U.S. Patent No. 8,856,780

20171101

REVISION DATE

FT-RSA-MA3-[FT-DC2-S]FIRMWARE

FT-DC2-SHARDWARE

ADS-USB (OPTIONAL)ADS-WLM-AN1/ADS-WLM-AP1 (OPTIONAL)DRONE MOBILE DR-2000 (OPTIONAL)COMPATIBLE RF-KIT (OPTIONAL)

ACCESSORIES

DOCUMENT NUMBER

2014-2018 MAZDA 6 PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2017

INSTALL GUIDE

NOTICE

The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

T002_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

A

C

B

PAGE 2 OF 9

U.S. Patent No. 8,856,780 2014-2018 Mazda 6 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

!

MS1

VS2

VS1

VS4

VS3

T002_H

1

8

2

9

3

10

4

11

5

12

6

13

7

14

2

2 31 4 65

2

1

1

MS2

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

T-HARNESS / WIRING DIAGRAM - 1 OF 1

M5

M4

M2

M3

START STOP UNIT, UNDER STEERING COLUMN (B)

1 2

2020

010102020303

1212

0303

04040505060607070808090910101111

01010202

040405050606070708080909

1111

1313141415151616171718181919

010102020303040405050606

01010202030304040505060607 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT080809091010

12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT

RELAY

1: WHITE

2: WHITE

2: VEHICLE HARNESS

1: VEHICLE HARNESS

CLOCK SPRING (D)

HORN (-) BLUE - 01

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

GRAY/RED•BLUE DOTGRAY/RED•BLUE DOT

GRAY•BLUE DOTGRAY•BLUE DOTGRAY/BLACK•BLUE DOTGRAY/BLACK•BLUE DOT

INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE

SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,

FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.

PARKING LIGHT 2 (-) GREEN - 04

PARKING LIGHT 1 (-) YELLOW - 03

1

PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)

(SWITCH SIDE)

(CONNECTOR SIDE)

1: WHITE

HOOD SWITCH

OPTIONAL

!

M3

M2M5M4

PAGE 3 OF 9

U.S. Patent No. 8,856,780 2014-2018 Mazda 6 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

T002_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

C

B

PAGE 4 OF 9

U.S. Patent No. 8,856,780 2014-2018 Mazda 6 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

!

8 77 6 5 4 3 2 110 9

20212223 14 131819

12 11

17 16 1524

2

18

3

19

1

17

9

25

10

26

4

20

11

27

8

24

6

22

7

23

5

21

12

28

13

29

14

30

15

31

16

32

T002_W

1

8

2

9

3

10

4

11

5

12

6

13

7

14

1

1

2 31 4 65

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT01 GREEN•BLACK DOT02 BLUE•BLACK DOT02 BLUE•BLACK DOT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - PTS (-) OUTPUT11 GRAY/RED - PTS (-) OUTPUT12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - KEYLESS (DATA)13 GREEN/RED - KEYLESS (DATA)14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN - ACCESSORY (+) IN/OUT15 BROWN - ACCESSORY (+) IN/OUT16 ORANGE/BLACK16 ORANGE/BLACK17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE - STARTER (+) OUTPUT18 PURPLE - STARTER (+) OUTPUT

20 BLACK - GROUND (-)20 BLACK - GROUND (-)

07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT

GROUND (-) BLACK - 13

ACCESSORY (+) BROWN/RED - 14

KEYLESS (DATA) GREEN/ORANGE - 09

CANH (DATA) WHITE OR WHITE/BLACK - 07

CANL (DATA) RED OR RED/YELLOW - 08

IGNITION (+) LTGREEN/RED - 10

12 (+) YELLOW - 12

PTS (-) RED/BLACK - 17

STARTER (+) BROWN/BLACK - 23

START STOP UNIT, UNDER STEERING COLUMN (A)

1: WHITE

2: WHITE

1 2

19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT

12 WHITE•BLACK DOT - PARKING LIGHT 1 (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT 1 (-) OUTPUT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT

10 WHITE/BLACK•BLACK10 WHITE/BLACK•BLACK

01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE02 WHITE/BLACK•BLUE DOT - IGNITION (+)02 WHITE/BLACK•BLUE DOT - IGNITION (+)

04 WHITE/RED•BLUE DOT - IGNITION (+)04 WHITE/RED•BLUE DOT - IGNITION (+)05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

03 GRAY/RED•BLUE DOT - PARKING LIGHT 2 (-) CONNECTOR SIDE03 GRAY/RED•BLUE DOT - PARKING LIGHT 2 (-) CONNECTOR SIDE

CLOCK SPRING (B)

HORN (-) BLUE - 0110 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

IGNITION (+) PURPLE - 17

PARKING LIGHT 2 (-) GREEN - 04

PARKING LIGHT 1 (-) YELLOW - 03

INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE

SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,

FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.

HOOD SWITCH

1

PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)

1: WHITE

!

M3

M2M5M4

PAGE 5 OF 9

U.S. Patent No. 8,856,780 2014-2018 Mazda 6 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

>>

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

04

ENGINE

START

STOP

STOP ACC ON STARTSTOP

05

06

07

08

ENGINE

START

STOP

STOP ACC ON STARTON

09

10

11

ENGINE

START

STOP

STOP ACC ON STARTSTOP

>>

12

ENGINE

START

STOP

STOP ACC ON STARTSTART

13

14

15

16

MODULE PROGRAMMING PROCEDURE - 1 OF 1

WARNING: All vehicle doors must be closed

and locked prior to remote start sequence.

Set ignition to ON position.

Wait, LED 1 will turn solid RED to confirm that

the ignition is ON.

Wait 10 seconds, LED 1 will flash GREEN

rapidly.

Set ignition to OFF position.

WARNING: Disconnect power last. Disconnect

module from vehicle.

Connect module to computer and proceed

with extended programming.

Connect power first. Connect module to

vehicle.

Set ignition to ON position.

Wait, LED 1 will turn solid RED to confirm that

the ignition is ON.

Wait, LED 1 will turn solid GREEN for 2

seconds.

Set ignition to OFF position.

If vehicle is equipped with power liftgate: open

and close the power liftgate with OEM keyfob.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming

button.

Release the brake pedal.

Wait, LED 2 will flash GREEN. Module

Programming Procedure completed.

PAGE 6 OF 9

U.S. Patent No. 8,856,780 2014-2018 Mazda 6 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

>>

01

02

03

04

05

06

>>

TAKEOVER PROCEDURE - 1 OF 1

All vehicle doors must be closed and locked

prior to remote start sequence.

Time restriction. Complete steps 2 to 5 within

45 seconds.

Press unlock on OEM or aftermarket remote

or request switch.

Open driver door and enter vehicle.

Close driver door.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in

vehicle engine shutdown.

PAGE 7 OF 9

U.S. Patent No. 8,856,780 2014-2018 Mazda 6 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once

[1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 8 OF 9

U.S. Patent No. 8,856,780 2014-2018 Mazda 6 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 9 OF 9

U.S. Patent No. 8,856,780 2014-2018 Mazda 6 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

U.S. Patent No. 8,856,780

20171101

REVISION DATE

FT-RSA-MA3-[FT-DC2-S]FIRMWARE

FT-DC2-SHARDWARE

ADS-USB (OPTIONAL)ADS-WLM-AN1/ADS-WLM-AP1 (OPTIONAL)DRONE MOBILE DR-2000 (OPTIONAL)COMPATIBLE RF-KIT (OPTIONAL)

ACCESSORIES

DOCUMENT NUMBER

2016-2018 MAZDA CX-3 PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2017

INSTALL GUIDE

NOTICE

The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

T005_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

A

B

C

PAGE 2 OF 9

U.S. Patent No. 8,856,780 2016-2018 Mazda CX-3 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

!

MS1

VS2

VS1

VS4

VS3

T005_H

1

8

2

9

3

10

4

11

5

12

6

13

7

14

MS2

1

1

87654321

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

T-HARNESS / WIRING DIAGRAM - 1 OF 1

M5

M4

M2

M3

START STOP UNIT, UNDER STEERING COLUMN (A)

2020

010102020303

1212

04040505060607070808090910101111

010102020303040405050606070708080909

1111

1313141415 BROWN15 BROWN161617171818

010102020303040405050606

0101020203030404050506060707080809091010

RELAY

1: WHITE

2: WHITE

1 22: VEHICLE HARNESS

1: VEHICLE HARNESS

(SWITCH SIDE)

1212

1919

CLOCK SPRING (B)

HORN (-) PINK - 01

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT

PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)

GRAY/RED•BLUE DOTGRAY/RED•BLUE DOT

GRAY•BLUE DOTGRAY•BLUE DOTGRAY/BLACK•BLUE DOT

INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE

SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,

FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.

PARKING LIGHT 2 (-) BLACK - 02

PARKING LIGHT 1 (-) BLUE - 01

11: WHITE

HOOD SWITCH

(CONNECTOR SIDE)

22017 CX-3 w/AWD : CUT AND INSULATE BOTHENDS OF THE BROWN WIRE LOCATED IN PIN 15

2

!

M3

M2M5M4

PAGE 3 OF 9

U.S. Patent No. 8,856,780 2016-2018 Mazda CX-3 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

T005_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

B

C

PAGE 4 OF 9

U.S. Patent No. 8,856,780 2016-2018 Mazda CX-3 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

!

8 77 6 5 4 3 2 110 9

20212223 14 131819

12 11

17 16 1524

2

18

3

19

1

17

9

25

10

26

4

20

11

27

8

24

6

22

7

23

5

21

12

28

13

29

14

30

15

31

16

32

T005_W

1

8

2

9

3

10

4

11

5

12

6

13

7

14

1

1

87654321

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT01 GREEN•BLACK DOT02 BLUE•BLACK DOT02 BLUE•BLACK DOT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - PTS (-) OUTPUT11 GRAY/RED - PTS (-) OUTPUT12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - KEYLESS (DATA)14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE - STARTER (+) OUTPUT18 PURPLE - STARTER (+) OUTPUT

20 BLACK - GROUND (-)20 BLACK - GROUND (-)

07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT

GROUND (-) BLACK - 13

CANH (DATA) GREEN - 07

CANL (DATA) RED - 08

IGNITION (+) YELLOW - 10

12 (+) PINK - 12

PTS 2 (-) RED - 17

STARTER 1 (+) GRAY - 23

START STOP UNIT, UNDER STEERING COLUMN (A)

1: WHITE

2: WHITE

1 2

19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT

12 WHITE•BLACK DOT12 WHITE•BLACK DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT

06 WHITE•BLUE06 WHITE•BLUE

CLOCK SPRING (B)

HORN (-) PINK - 0110 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

KEYLESS (DATA) PINK - 09

01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE

PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)

INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE

SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,

FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.

PARKING LIGHT 2 (-) BLACK - 02

PARKING LIGHT 1 (-) BLUE - 01

11: WHITE

HOOD SWITCH02 WHITE/BLACK•BLUE DOT - IGNITION (+)02 WHITE/BLACK•BLUE DOT - IGNITION (+)

04 WHITE/RED•BLUE - IGNITION (+)04 WHITE/RED•BLUE - IGNITION (+)05 GRAY•BLUE DOT - PARKING LIGHT 1 (-) OUTPUT05 GRAY•BLUE DOT - PARKING LIGHT 1 (-) OUTPUT

03 GRAY/RED•BLUE DOTDOT - PARKING LIGHT 2 (-) CONNECTOR SIDE03 GRAY/RED•BLUE DOTDOT - PARKING LIGHT 2 (-) CONNECTOR SIDE

IGNITION (+) BROWN - 17

!

M3

M2M5M4

PAGE 5 OF 9

U.S. Patent No. 8,856,780 2016-2018 Mazda CX-3 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

>>

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

04

ENGINE

START

STOP

STOP ACC ON STARTSTOP

05

06

07

08

ENGINE

START

STOP

STOP ACC ON STARTON

09

10

11

ENGINE

START

STOP

STOP ACC ON STARTSTOP

>>

12

ENGINE

START

STOP

STOP ACC ON STARTSTART

13

14

15

16

MODULE PROGRAMMING PROCEDURE - 1 OF 1

WARNING: All vehicle doors must be closed

and locked prior to remote start sequence.

Set ignition to ON position.

Wait, LED 1 will turn solid RED to confirm that

the ignition is ON.

Wait 10 seconds, LED 1 will flash GREEN

rapidly.

Set ignition to OFF position.

WARNING: Disconnect power last. Disconnect

module from vehicle.

Connect module to computer and proceed

with extended programming.

Connect power first. Connect module to

vehicle.

Set ignition to ON position.

Wait, LED 1 will turn solid RED to confirm that

the ignition is ON.

Wait, LED 1 will turn solid GREEN for 2

seconds.

Set ignition to OFF position.

If vehicle is equipped with power liftgate: open

and close the power liftgate with OEM keyfob.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming

button.

Release the brake pedal.

Wait, LED 2 will flash GREEN. Module

Programming Procedure completed.

PAGE 6 OF 9

U.S. Patent No. 8,856,780 2016-2018 Mazda CX-3 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

>>

01

02

03

04

05

06

>>

TAKEOVER PROCEDURE - 1 OF 1

All vehicle doors must be closed and locked

prior to remote start sequence.

Time restriction. Complete steps 2 to 5 within

45 seconds.

Press unlock on OEM or aftermarket remote

or request switch.

Open driver door and enter vehicle.

Close driver door.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in

vehicle engine shutdown.

PAGE 7 OF 9

U.S. Patent No. 8,856,780 2016-2018 Mazda CX-3 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once

[1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 8 OF 9

U.S. Patent No. 8,856,780 2016-2018 Mazda CX-3 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 9 OF 9

U.S. Patent No. 8,856,780 2016-2018 Mazda CX-3 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

U.S. Patent No. 8,856,780

20171101

REVISION DATE

FT-RSA-MA3-[FT-DC2-S]FIRMWARE

FT-DC2-SHARDWARE

ADS-USB (OPTIONAL)ADS-WLM-AN1/ADS-WLM-AP1 (OPTIONAL)DRONE MOBILE DR-2000 (OPTIONAL)COMPATIBLE RF-KIT (OPTIONAL)

ACCESSORIES

DOCUMENT NUMBER

2013-2016 MAZDA CX-5 PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2017

INSTALL GUIDE

NOTICE

The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

T004_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

C

AB

PAGE 2 OF 9

U.S. Patent No. 8,856,780 2013-2016 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

!

MS1

VS2

VS1

VS4

VS3

T004_H

1

8

2

9

3

10

4

11

5

12

6

13

7

14

MS2

2

2 31 4 65

2

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

T-HARNESS / WIRING DIAGRAM - 1 OF 1

M5

M4

M2

M3

START STOP UNIT, UNDER STEERING COLUMN (A)

1 2

2020

010102020303

1212

04040505060607070808090910101111

01010202030304040505060607070808090910101111

131314141515161617171818

010102020303040405050606

01010202030304040505060607 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT080809091010

12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT

1919

RELAY

1: WHITE

2: WHITE

2: VEHICLE HARNESS

1: VEHICLE HARNESS

CLOCK SPRING (B)

PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)

HORN (-) PURPLE - 01

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

GRAY/RED•BLUE DOTGRAY/RED•BLUE DOT

GRAY•BLUE DOTGRAY•BLUE DOTGRAY/BLACK•BLUE DOTGRAY/BLACK•BLUE DOT

INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE

SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,

FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.

PARKING LIGHT 2 (-) GREEN - 04

PARKING LIGHT 1 (-) YELLOW - 03

1

(SWITCH SIDE)

(CONNECTOR SIDE)

1: WHITE

HOOD SWITCH

!

M3

M2M5M4

PAGE 3 OF 9

U.S. Patent No. 8,856,780 2013-2016 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

T004_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

C

AB

PAGE 4 OF 9

U.S. Patent No. 8,856,780 2013-2016 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

!

8 77 6 5 4 3 2 110 9

20212223 14 131819

12 11

17 16 1524

2

18

3

19

1

17

9

25

10

26

4

20

11

27

8

24

6

22

7

23

5

21

12

28

13

29

14

30

15

31

16

32

T004_W

1

8

2

9

3

10

4

11

5

12

6

13

7

14

1

1

2 31 4 65

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT01 GREEN•BLACK DOT02 BLUE•BLACK DOT02 BLUE•BLACK DOT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - PTS (-) OUTPUT11 GRAY/RED - PTS (-) OUTPUT12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - KEYLESS DATA)14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN - ACCESSORY (+) IN/OUT15 BROWN - ACCESSORY (+) IN/OUT16 ORANGE/BLACK16 ORANGE/BLACK17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE - STARTER (+) OUTPUT18 PURPLE - STARTER (+) OUTPUT

20 BLACK - GROUND (-)20 BLACK - GROUND (-)

07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT

GROUND (-) BLACK - 13

ACCESSORY (+) BROWN/RED - 14

KEYLESS (DATA) GREEN/ORANGE - 09

CANH (DATA) WHITE/BLACK - 07

CANL (DATA) RED/YELLOW - 08

IGNITION (+) LTGREEN/RED - 10

12 (+) YELLOW - 12

PTS (-) RED/BLACK - 17

STARTER (+) BROWN/BLACK - 23

START STOP UNIT, UNDER STEERING COLUMN (A)

1: WHITE

2: WHITE

1 2

19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT

12 WHITE•BLACK DOT12 WHITE•BLACK DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT

01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE

06 WHITE•BLUE DOT06 WHITE•BLUE DOT

CLOCK SPRING (B)

HORN (-) PURPLE - 0110 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

02 WHITE/BLACK•BLU DOTE - IGNITION (+)02 WHITE/BLACK•BLU DOTE - IGNITION (+)

04 WHITE/RED•BLUE DOT - IGNITION (+)04 WHITE/RED•BLUE DOT - IGNITION (+)05 GRAY•BLUE DOT - PARKING LIGHT 1 (-) OUTPUT05 GRAY•BLUE DOT - PARKING LIGHT 1 (-) OUTPUT

03 GRAY/RED•BLUE DOT - PARKING LIGHT 2 (-) CONNECTOR SIDE03 GRAY/RED•BLUE DOT - PARKING LIGHT 2 (-) CONNECTOR SIDE

IGNITION (+) PURPLE - 17

PARKING LIGHT 2 (-) GREEN - 04

PARKING LIGHT 1 (-) YELLOW - 03

INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE

SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,

FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.

HOOD SWITCH

1

PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)

1: WHITE

!

M3

M2M5M4

PAGE 5 OF 9

U.S. Patent No. 8,856,780 2013-2016 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

>>

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

04

ENGINE

START

STOP

STOP ACC ON STARTSTOP

05

06

07

08

ENGINE

START

STOP

STOP ACC ON STARTON

09

10

11

ENGINE

START

STOP

STOP ACC ON STARTSTOP

>>

12

ENGINE

START

STOP

STOP ACC ON STARTSTART

13

14

15

16

MODULE PROGRAMMING PROCEDURE - 1 OF 1

WARNING: All vehicle doors must be closed

and locked prior to remote start sequence.

Set ignition to ON position.

Wait, LED 1 will turn solid RED to confirm that

the ignition is ON.

Wait 10 seconds, LED 1 will flash GREEN

rapidly.

Set ignition to OFF position.

WARNING: Disconnect power last. Disconnect

module from vehicle.

Connect module to computer and proceed

with extended programming.

Connect power first. Connect module to

vehicle.

Set ignition to ON position.

Wait, LED 1 will turn solid RED to confirm that

the ignition is ON.

Wait, LED 1 will turn solid GREEN for 2

seconds.

Set ignition to OFF position.

If vehicle is equipped with power liftgate: open

and close the power liftgate with OEM keyfob.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming

button.

Release the brake pedal.

Wait, LED 2 will flash GREEN. Module

Programming Procedure completed.

PAGE 6 OF 9

U.S. Patent No. 8,856,780 2013-2016 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

>>

01

02

03

04

05

06

>>

TAKEOVER PROCEDURE - 1 OF 1

All vehicle doors must be closed and locked

prior to remote start sequence.

Time restriction. Complete steps 2 to 5 within

45 seconds.

Press unlock on OEM or aftermarket remote

or request switch.

Open driver door and enter vehicle.

Close driver door.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in

vehicle engine shutdown.

PAGE 7 OF 9

U.S. Patent No. 8,856,780 2013-2016 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once

[1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 8 OF 9

U.S. Patent No. 8,856,780 2013-2016 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 9 OF 9

U.S. Patent No. 8,856,780 2013-2016 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

U.S. Patent No. 8,856,780

20171101

REVISION DATE

FT-RSA-MA3-[FT-DC2-S]FIRMWARE

FT-DC2-SHARDWARE

ADS-USB (OPTIONAL)ADS-WLM-AN1/ADS-WLM-AP1 (OPTIONAL)DRONE MOBILE DR-2000 (OPTIONAL)COMPATIBLE RF-KIT (OPTIONAL)

ACCESSORIES

DOCUMENT NUMBER

2017-2018 MAZDA CX-5 PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2017

INSTALL GUIDE

NOTICE

The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

T008_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

C

AB

PAGE 2 OF 9

U.S. Patent No. 8,856,780 2017-2018 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

!

MS1

VS2

VS1

VS4

VS3

T008_H

1

8

2

9

3

10

4

11

5

12

6

13

7

14

MS2

2

2 31 4 65

2

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

T-HARNESS / WIRING DIAGRAM - 1 OF 1

M5

M4

M2

M3

START STOP UNIT, UNDER STEERING COLUMN (A)

1 2

2020

010102020303

1212

04040505060607070808090910101111

01010202030304040505060607070808090910101111

131314141515161617171818

010102020303040405050606

01010202030304040505060607 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT080809091010

12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT

1919

RELAY

1: WHITE

2: WHITE

2: VEHICLE HARNESS

1: VEHICLE HARNESS

CLOCK SPRING (B)

PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)

HORN (-) PURPLE - 01

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

GRAY/RED•BLUE DOTGRAY/RED•BLUE DOT

GRAY•BLUE DOTGRAY•BLUE DOTGRAY/BLACK•BLUE DOTGRAY/BLACK•BLUE DOT

INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE

SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,

FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.

PARKING LIGHT 2 (-) GREEN - 04

PARKING LIGHT 1 (-) YELLOW - 03

1

(SWITCH SIDE)

(CONNECTOR SIDE)

1: WHITE

HOOD SWITCH

!

M3

M2M5M4

PAGE 3 OF 9

U.S. Patent No. 8,856,780 2017-2018 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

T008_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

C

AB

PAGE 4 OF 9

U.S. Patent No. 8,856,780 2017-2018 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

!

8 77 6 5 4 3 2 110 9

20212223 14 131819

12 11

17 16 1524

2

18

3

19

1

17

9

25

10

26

4

20

11

27

8

24

6

22

7

23

5

21

12

28

13

29

14

30

15

31

16

32

T008_W

1

8

2

9

3

10

4

11

5

12

6

13

7

14

1

1

2 31 4 65

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT01 GREEN•BLACK DOT02 BLUE•BLACK DOT02 BLUE•BLACK DOT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - PTS (-) OUTPUT11 GRAY/RED - PTS (-) OUTPUT12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - KEYLESS DATA)14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN - ACCESSORY (+) IN/OUT15 BROWN - ACCESSORY (+) IN/OUT16 ORANGE/BLACK16 ORANGE/BLACK17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE - STARTER (+) OUTPUT18 PURPLE - STARTER (+) OUTPUT

20 BLACK - GROUND (-)20 BLACK - GROUND (-)

07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT

GROUND (-) BLACK - 13

ACCESSORY (+) PINK - 14

KEYLESS (DATA) GREEN - 09

CANH (DATA) WHITE - 07

CANL (DATA) RED - 08

IGNITION (+) PINK - 10

12 (+) YELLOW - 12

PTS (-) RED - 17

STARTER (+) BROWN - 23

START STOP UNIT, UNDER STEERING COLUMN (A)

1: WHITE

2: WHITE

1 2

19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT

12 WHITE•BLACK DOT12 WHITE•BLACK DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT

01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE

06 WHITE•BLUE DOT06 WHITE•BLUE DOT

CLOCK SPRING (B)

HORN (-) PURPLE - 0110 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

02 WHITE/BLACK•BLU DOTE - IGNITION (+)02 WHITE/BLACK•BLU DOTE - IGNITION (+)

04 WHITE/RED•BLUE DOT - IGNITION (+)04 WHITE/RED•BLUE DOT - IGNITION (+)05 GRAY•BLUE DOT - PARKING LIGHT 1 (-) OUTPUT05 GRAY•BLUE DOT - PARKING LIGHT 1 (-) OUTPUT

03 GRAY/RED•BLUE DOT - PARKING LIGHT 2 (-) CONNECTOR SIDE03 GRAY/RED•BLUE DOT - PARKING LIGHT 2 (-) CONNECTOR SIDE

IGNITION (+) PURPLE - 17

PARKING LIGHT 2 (-) GREEN - 04

PARKING LIGHT 1 (-) YELLOW - 03

INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE

SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,

FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.

HOOD SWITCH

1

PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)

1: WHITE

!

M3

M2M5M4

PAGE 5 OF 9

U.S. Patent No. 8,856,780 2017-2018 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

>>

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

04

ENGINE

START

STOP

STOP ACC ON STARTSTOP

05

06

07

08

ENGINE

START

STOP

STOP ACC ON STARTON

09

10

11

ENGINE

START

STOP

STOP ACC ON STARTSTOP

>>

12

ENGINE

START

STOP

STOP ACC ON STARTSTART

13

14

15

16

MODULE PROGRAMMING PROCEDURE - 1 OF 1

WARNING: All vehicle doors must be closed

and locked prior to remote start sequence.

Set ignition to ON position.

Wait, LED 1 will turn solid RED to confirm that

the ignition is ON.

Wait 10 seconds, LED 1 will flash GREEN

rapidly.

Set ignition to OFF position.

WARNING: Disconnect power last. Disconnect

module from vehicle.

Connect module to computer and proceed

with extended programming.

Connect power first. Connect module to

vehicle.

Set ignition to ON position.

Wait, LED 1 will turn solid RED to confirm that

the ignition is ON.

Wait, LED 1 will turn solid GREEN for 2

seconds.

Set ignition to OFF position.

If vehicle is equipped with power liftgate: open

and close the power liftgate with OEM keyfob.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming

button.

Release the brake pedal.

Wait, LED 2 will flash GREEN. Module

Programming Procedure completed.

PAGE 6 OF 9

U.S. Patent No. 8,856,780 2017-2018 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

>>

01

02

03

04

05

06

>>

TAKEOVER PROCEDURE - 1 OF 1

All vehicle doors must be closed and locked

prior to remote start sequence.

Time restriction. Complete steps 2 to 5 within

45 seconds.

Press unlock on OEM or aftermarket remote

or request switch.

Open driver door and enter vehicle.

Close driver door.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in

vehicle engine shutdown.

PAGE 7 OF 9

U.S. Patent No. 8,856,780 2017-2018 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once

[1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 8 OF 9

U.S. Patent No. 8,856,780 2017-2018 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 9 OF 9

U.S. Patent No. 8,856,780 2017-2018 Mazda CX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

U.S. Patent No. 8,856,780

20171101

REVISION DATE

FT-RSA-MA3-[FT-DC2-S]FIRMWARE

FT-DC2-SHARDWARE

ADS-USB (OPTIONAL)ADS-WLM-AN1/ADS-WLM-AP1 (OPTIONAL)DRONE MOBILE DR-2000 (OPTIONAL)COMPATIBLE RF-KIT (OPTIONAL)

ACCESSORIES

DOCUMENT NUMBER

2016-2018 MAZDA CX-9 PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2017

INSTALL GUIDE

NOTICE

The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

T006_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

A

C

B

PAGE 2 OF 9

U.S. Patent No. 8,856,780 2016-2018 Mazda CX-9 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

!

MS1

VS2

VS1

VS4

VS3

T006_H

1

8

2

9

3

10

4

11

5

12

6

13

7

14

MS2

1

1

87654321

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

T-HARNESS / WIRING DIAGRAM - 1 OF 1

M5

M4

M2

M3

START STOP UNIT, UNDER STEERING COLUMN (A)

2020

010102020303

1212

04040505060607070808090910101111

010102020303040405050606070708080909

1111

131314141515161617171818

010102020303040405050606

0101020203030404050506060707080809091010

RELAY

1: WHITE

2: WHITE

1 22: VEHICLE HARNESS

1: VEHICLE HARNESS

(SWITCH SIDE)

1212

1919

CLOCK SPRING (B)

HORN (-) WHITE/BLACK - 01

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT

PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)

GRAY/RED•BLUE DOTGRAY/RED•BLUE DOT

GRAY•BLUE DOTGRAY•BLUE DOTGRAY/BLACK•BLUE DOT

INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE

SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,

FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.

PARKING LIGHT 2 (-) BLACK - 02

PARKING LIGHT 1 (-) BLUE - 01

11: WHITE

HOOD SWITCH

(CONNECTOR SIDE)

!

M3

M2M5M4

PAGE 3 OF 9

U.S. Patent No. 8,856,780 2016-2018 Mazda CX-9 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

T006_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

C

B

PAGE 4 OF 9

U.S. Patent No. 8,856,780 2016-2018 Mazda CX-9 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

!

8 77 6 5 4 3 2 110 9

20212223 14 131819

12 11

17 16 1524

2

18

3

19

1

17

9

25

10

26

4

20

11

27

8

24

6

22

7

23

5

21

12

28

13

29

14

30

15

31

16

32

T006_W

1

8

2

9

3

10

4

11

5

12

6

13

7

14

1

1

87654321

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT01 GREEN•BLACK DOT02 BLUE•BLACK DOT02 BLUE•BLACK DOT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - PTS (-) OUTPUT11 GRAY/RED - PTS (-) OUTPUT12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - KEYLESS (DATA)14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN - ACCESSORY (+) IN/OUT15 BROWN - ACCESSORY (+) IN/OUT16 ORANGE/BLACK16 ORANGE/BLACK17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE - STARTER (+) OUTPUT18 PURPLE - STARTER (+) OUTPUT

20 BLACK - GROUND (-)20 BLACK - GROUND (-)

07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT

GROUND (-) BLACK - 13

CANH (DATA) PINK OR GREEN - 07

CANL (DATA) GREEN/RED OR BLUE - 08

IGNITION (+) LTBLUE OR BROWN - 10

12V (+) GREEN OR RED - 12

PTS (-) GRAY - 17

STARTER (+) YELLOW/BLACK - 23

START STOP UNIT, UNDER STEERING COLUMN (A)

1: WHITE

2: WHITE

1 2

19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT

ACCESSORY (+) GRAY OR TAN - 14

12 WHITE•BLACK DOT12 WHITE•BLACK DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT

06 WHITE•BLUE06 WHITE•BLUE

CLOCK SPRING (B)

HORN (-) WHITE/BLACK - 0110 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

KEYLESS (DATA) BLUE - 09

01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE

PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)

INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE

SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,

FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.

PARKING LIGHT 2 (-) BLACK - 02

PARKING LIGHT 1 (-) BLUE - 01

11: WHITE

HOOD SWITCH02 WHITE/BLACK•BLUE DOT - IGNITION 2 (+)02 WHITE/BLACK•BLUE DOT - IGNITION 2 (+)

04 WHITE/RED•BLUE - IGNITION 2 (+)04 WHITE/RED•BLUE - IGNITION 2 (+)05 GRAY•BLUE DOT - PARKING LIGHT 1 (-) OUTPUT05 GRAY•BLUE DOT - PARKING LIGHT 1 (-) OUTPUT

03 GRAY/RED•BLUE DOTDOT - PARKING LIGHT 2 (-) CONNECTOR SIDE03 GRAY/RED•BLUE DOTDOT - PARKING LIGHT 2 (-) CONNECTOR SIDE

IGNITION 2 (+) RED/BLACK - 17

!

M3

M2M5M4

PAGE 5 OF 9

U.S. Patent No. 8,856,780 2016-2018 Mazda CX-9 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

>>

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

04

ENGINE

START

STOP

STOP ACC ON STARTSTOP

05

06

07

08

ENGINE

START

STOP

STOP ACC ON STARTON

09

10

11

ENGINE

START

STOP

STOP ACC ON STARTSTOP

>>

12

ENGINE

START

STOP

STOP ACC ON STARTSTART

13

14

15

16

MODULE PROGRAMMING PROCEDURE - 1 OF 1

WARNING: All vehicle doors must be closed

and locked prior to remote start sequence.

Set ignition to ON position.

Wait, LED 1 will turn solid RED to confirm that

the ignition is ON.

Wait 10 seconds, LED 1 will flash GREEN

rapidly.

Set ignition to OFF position.

WARNING: Disconnect power last. Disconnect

module from vehicle.

Connect module to computer and proceed

with extended programming.

Connect power first. Connect module to

vehicle.

Set ignition to ON position.

Wait, LED 1 will turn solid RED to confirm that

the ignition is ON.

Wait, LED 1 will turn solid GREEN for 2

seconds.

Set ignition to OFF position.

If vehicle is equipped with power liftgate: open

and close the power liftgate with OEM keyfob.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming

button.

Release the brake pedal.

Wait, LED 2 will flash GREEN. Module

Programming Procedure completed.

PAGE 6 OF 9

U.S. Patent No. 8,856,780 2016-2018 Mazda CX-9 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

>>

01

02

03

04

05

06

>>

TAKEOVER PROCEDURE - 1 OF 1

All vehicle doors must be closed and locked

prior to remote start sequence.

Time restriction. Complete steps 2 to 5 within

45 seconds.

Press unlock on OEM or aftermarket remote

or request switch.

Open driver door and enter vehicle.

Close driver door.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in

vehicle engine shutdown.

PAGE 7 OF 9

U.S. Patent No. 8,856,780 2016-2018 Mazda CX-9 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once

[1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 8 OF 9

U.S. Patent No. 8,856,780 2016-2018 Mazda CX-9 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 9 OF 9

U.S. Patent No. 8,856,780 2016-2018 Mazda CX-9 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

U.S. Patent No. 8,856,780

20171101

REVISION DATE

FT-RSA-MA3-[FT-DC2-S]FIRMWARE

FT-DC2-SHARDWARE

ADS-USB (OPTIONAL)ADS-WLM-AN1/ADS-WLM-AP1 (OPTIONAL)DRONE MOBILE DR-2000 (OPTIONAL)COMPATIBLE RF-KIT (OPTIONAL)

ACCESSORIES

DOCUMENT NUMBER

2016-2018 MAZDA MX-5 PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2017

INSTALL GUIDE

NOTICE

The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

T007_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

A

C

B

PAGE 2 OF 9

U.S. Patent No. 8,856,780 2016-2018 Mazda MX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

!

MS1

VS2

VS1

VS4

VS3

T007_H

1

8

2

9

3

10

4

11

5

12

6

13

7

14

MS2

1

1

87654321

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

T-HARNESS / WIRING DIAGRAM - 1 OF 1

M5

M4

M2

M3

START STOP UNIT, UNDER STEERING COLUMN (A)

2020

010102020303

1212

04040505060607070808090910101111

010102020303040405050606070708080909

1111

131314141515161617171818

010102020303040405050606

0101020203030404050506060707080809091010

RELAY

1: WHITE

2: WHITE

1 22: VEHICLE HARNESS

1: VEHICLE HARNESS

(SWITCH SIDE)

12 WHITE•BLACK DOT - PARKING LIGHT 1 (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT 1 (-) OUTPUT

1919

CLOCK SPRING (B)

HORN (-) PINK - 01

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT

PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)

GRAY/RED•BLUE DOTGRAY/RED•BLUE DOT

GRAY•BLUE DOTGRAY•BLUE DOTGRAY/BLACK•BLUE DOT

INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE

SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,

FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.

PARKING LIGHT 2 (-) BLACK - 02

PARKING LIGHT 1 (-) BLUE - 01

11: WHITE

HOOD SWITCH

(CONNECTOR SIDE)

!

M3

M2M5M4

PAGE 3 OF 9

U.S. Patent No. 8,856,780 2016-2018 Mazda MX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

T007_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

C

B

PAGE 4 OF 9

U.S. Patent No. 8,856,780 2016-2018 Mazda MX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

!

8 77 6 5 4 3 2 110 9

20212223 14 131819

12 11

17 16 1524

2

18

3

19

1

17

9

25

10

26

4

20

11

27

8

24

6

22

7

23

5

21

12

28

13

29

14

30

15

31

16

32

T007_W

1

8

2

9

3

10

4

11

5

12

6

13

7

14

2

2

1

1

87654321

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT01 GREEN•BLACK DOT02 BLUE•BLACK DOT02 BLUE•BLACK DOT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - PTS (-) OUTPUT11 GRAY/RED - PTS (-) OUTPUT12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - KEYLESS (DATA)14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE - STARTER (+) OUTPUT18 PURPLE - STARTER (+) OUTPUT

20 BLACK - GROUND (-)20 BLACK - GROUND (-)

07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT07 GRAY•SILVER DOT - HOOD STATUS (-) INPUT

GROUND (-) BLACK - 13

CANH (DATA) WHITE - 07

CANL (DATA) RED - 08

IGNITION (+) LTGREEN - 10

12V (+) RED - 12

PTS (-) GRAY - 17

STARTER (+) BROWN - 23

START STOP UNIT, UNDER STEERING COLUMN (A)

1: WHITE

2: WHITE

1 2

19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT

OPTIONAL12 WHITE•BLACK DOT - PARKING LIGHT 1 (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT 1 (-) OUTPUT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT

06 WHITE•BLUE06 WHITE•BLUE

CLOCK SPRING (B)

HORN (-) PINK - 0110 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

KEYLESS (DATA) YELLOW - 09

01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE01 GRAY/BLACK•BLUE DOT - PARKING LIGHT 2 (-) SWITCH SIDE

PARKING LIGHTS SWITCH, LEFT OF STEERING COLUMN (C)

INSTALL THE SUPPLIED HOOD SWITCHIF THE VEHICLE IS NOT EQUIPPED WITH ONE

SET THE PROGRAMMING OPTION THROUGH WEBLINK AS FOLLOWS:IN “MENU #7 INPUTS CONFIGURATION”,

FOR “4-HOOD INPUT SOURCE” SELECT “1-ANALOG”.

PARKING LIGHT 2 (-) BLACK - 02

PARKING LIGHT 1 (-) BLUE - 01

11: WHITE

HOOD SWITCH02 WHITE/BLACK•BLUE DOT - IGNITION (+)02 WHITE/BLACK•BLUE DOT - IGNITION (+)

04 WHITE/RED•BLUE DOT - IGNITION (+)04 WHITE/RED•BLUE DOT - IGNITION (+)05 GRAY•BLUE DOT05 GRAY•BLUE DOT

03 GRAY/RED•BLUE DOT - PARKING LIGHT 2 (-) CONNECTOR SIDE03 GRAY/RED•BLUE DOT - PARKING LIGHT 2 (-) CONNECTOR SIDE

IGNITION (+) BROWN - 17

!

M3

M2M5M4

PAGE 5 OF 9

U.S. Patent No. 8,856,780 2016-2018 Mazda MX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

>>

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

04

ENGINE

START

STOP

STOP ACC ON STARTSTOP

05

06

07

08

ENGINE

START

STOP

STOP ACC ON STARTON

09

10

11

ENGINE

START

STOP

STOP ACC ON STARTSTOP

>>

12

ENGINE

START

STOP

STOP ACC ON STARTSTART

13

14

15

16

MODULE PROGRAMMING PROCEDURE - 1 OF 1

WARNING: All vehicle doors must be closed

and locked prior to remote start sequence.

Set ignition to ON position.

Wait, LED 1 will turn solid RED to confirm that

the ignition is ON.

Wait 10 seconds, LED 1 will flash GREEN

rapidly.

Set ignition to OFF position.

WARNING: Disconnect power last. Disconnect

module from vehicle.

Connect module to computer and proceed

with extended programming.

Connect power first. Connect module to

vehicle.

Set ignition to ON position.

Wait, LED 1 will turn solid RED to confirm that

the ignition is ON.

Wait, LED 1 will turn solid GREEN for 2

seconds.

Set ignition to OFF position.

If vehicle is equipped with power liftgate: open

and close the power liftgate with OEM keyfob.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming

button.

Release the brake pedal.

Wait, LED 2 will flash GREEN. Module

Programming Procedure completed.

PAGE 6 OF 9

U.S. Patent No. 8,856,780 2016-2018 Mazda MX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

>>

01

02

03

04

05

06

>>

TAKEOVER PROCEDURE - 1 OF 1

All vehicle doors must be closed and locked

prior to remote start sequence.

Time restriction. Complete steps 2 to 5 within

45 seconds.

Press unlock on OEM or aftermarket remote

or request switch.

Open driver door and enter vehicle.

Close driver door.

Press and release BRAKE pedal.

Take over procedure completed.

Failure to follow procedure will result in

vehicle engine shutdown.

PAGE 7 OF 9

U.S. Patent No. 8,856,780 2016-2018 Mazda MX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once

[1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 8 OF 9

U.S. Patent No. 8,856,780 2016-2018 Mazda MX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 9 OF 9

U.S. Patent No. 8,856,780 2016-2018 Mazda MX-5 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2017 FT-RSA-MA3-[FT-DC2-S]-EN

20171101