INNOVATING...EXCELLING...TRANSFORMING!

Distribution & Power Transformers

Overview:Rohitra India Private Limited (RIPL) was incorporated on the 9th of April 2018. RIPL deals in Manufacturing and Maintenance of various types of transformers.

RIPL caters to the widest spectrum of Transformer applications. From general-purpose requirements for the commercial, industrial, and utility customers to designing for unique conditions.We “custom design” transformers to provide unparalleled performance for every application.

We have ISI, NABCB and ICS certification. Presently, we manufacture energy efficient BIS 1180 Transformers up to 2500 KVA.

Quality Focus:Rohitra India Pvt. Ltd. has a strong focus on Quality Assurance. From procurement of raw materials and components / assemblies to every aspect of manufacturing, supply and service, rigorous inspections and thorough quality checks are carried out. We also get our products type-tested from recognized government laboratories.

RIPL quality policy focuses on customer satisfaction by providing quality product backed by prompt after sales service. It fosters valuable feedback for innovation and continuous improvement in design and development of our products and manufacturing process. Our focus is to consistently exceed customer expectations with value added products and services.

Infrastructure:The RIPL manufacturing facility is located in Pune’s largest industrial belt - MIDC, Bhosari. It is a fully integrated facility spread over 8698 sq.ft. with all in-house facilities.

n 5 + 3 ton for material handling EOT Crane.

n Oil Filtration Plant with 1250 ltr./hr. capacity.

n Core Cutting.

n Facility for Disc, Helical and Crossover Winding.

n Insulation Cutting.

n In-house Fabrication facility.

The eco-friendly facility has dust-proof floors.

Human Assets:The RIPL team is one that constantly innovates – be it in products, processes, quality systems, customer support or information systems. It is a team of qualified and experienced Design Engineers, Software Engineers and skilled design Draftsmen, trained in advanced Design software. These highly skilled and committed professionals bring years of experience to the job and consistently ensure that each and every production activity factors in an adherence to the highest quality benchmarks established by the organization to roll out only the best of products.

Our strength is our people and their never-give-up spirit!

Advantage RIPL:n Low-loss and Efficient Transformer

Design

n Optimum efficiency and speed in the manufacturing processes with a completely integrated in-house manufacturing facility.

n Best – “Price and Delivery performance”

n Highly efficient management systems.

n Safety, Health and Hygiene for all employees

n Care for the environment.

This is what ensures that our Transformer reaches our customer at lowest purchase price and affords customers minimum lifetime running cost.

Testing:Our in-house Testing Facility is equipped to handle varied tests like:

n Ratio Test.n Induced High Voltage Test (up to 100 KV).n Double Voltage Double Frequency Test (50 KVA).n Impedance Voltage Test (No Load & Full Load Losses).n Heat Run Test (up to 2.5 MVA).n Winding Resistance Test (Micro Ohm Meter).

and also has

n Power Analyser.n Oil BDV Tester (100 KV capacity).n Capacitor Load Bank.n Harmonic Analyzer.

Transformers Manufactured:n Oil Filled Distribution Transformers.

n Rectifier / Converter / Inverter Transformers.

n Isolation Transformers.

n Arc / Induction Furnace Transformers.

n Multi-Winding Transformers.

n Solar / Windmill applications Transformers.

Design:Designs have been standardised up to 2500 KVA and 33 KV as per IS (2026 & 1180) reference standard. The experience of the Design Team at RIPL ensures optimum product efficiency, top product quality and strict compliance with required specifications.

We can also cater to non-standard job requirements within the prescribed range.

Approvals:n RIPL products are type-tested at recognized Institutes

like ERDA and are approved by respective Regulatory Boards.

n RIPL is an ISO 9001:2015 Certified company.

n RIPL Transformers are approved by MSEDCL.

n RIPL is BIS-1180 approved manufacturer.

lifetime running cost.

Transformers for:

n Residential Complexes n Commercial Complexes n Industriesn Solar / Wind Energy n Infrastructure n Electrical Distribution Networks

(Utility Boards)

Office: 207, Siddhivinayak Kesar, Narpatgiri Chowk, Somwar Peth, Pune 411011 I Tel.: +91 20 48618683Works: S-24, MIDC, Bhosari, Pune 411026, Maharashtra, India I Tel.: +91 7219131053 I Email: info@rohitraindia.com

OUR MISSIONOur mission is to provide highest quality of product in a timely manner with high level of customer satisfaction and to focus on continuous improvement.

OUR VISIONWe aim to establish ourselves as niche Transformer manufacturer, helping masses to get high quality of power and to be customer centric, reliable and result oriented.

Team RIPL Kaustubh Taware is Director - Marketing and holds DTM degree and has extensive export and domestic experience of 18 years. He has, to his credit, successfully achieved sales of over 7000 Transformers to date. His extensive marketing experience in multiple industries and strong relations within the electrical network community allows him to keep our order book healthy. Kaustubh

Kaustubh can be contacted on: +91 9970195048

Sachin Hivarkar, Director - Technical, is a BE (Elect.) and has around 12 years of Transformer manufacturing experience. He has extensive technical knowledge of Transformer specifications and Industry Standards and has been instrumental in manufacturing and supplying over 7000 Transformers. With his hands-on experience he ensures we provide quality products to our customers.

Sachin can be contacted on: +91 9890796796

Shubham Sethi, Director - Operations, is a Commerce Graduate with a MBA in Marketing. He looks after BIS work, operations and administration.

Shubham can be contacted on: +91 7304247247