ingersoll rand/aro piston pumps -...

Ingersoll Rand/ARO®

Piston PumpsFor Transfering, Spraying & Dispensing

Ingersoll Rand/ARO®

Piston PumpsFor Transfering, Spraying & Dispensing

Numéric Index

MODEL PAGE MODEL PAGE MODEL PAGE MODEL PAGE MODEL PAGE

10067 7061113 51 - 5261729 5262042 5265109 5465116 51 - 5665138 5265139 5265782 5365940 6965986 5466062 6766100 5266101 5266197 5266248 5866258 6766469 5766480 5466504 6566516 5866517 5866542 5266545 5266547 5266568 5466585 5266713 5166717 5466718 7366731 5766732 5766971 5267073 5167074 5167133 5567134 5767136 5767139 5176751 6479244 6791600 6791790 7392460 7392968 6192969 61

94254 5294256 52104282 70104283 70104284 70104285 70104286 70104287 70635040 73635043 73640067 51640169 51650250 53650251 53650252 53650409 8651100 53651103 53651412 68651500 63651511 63651533 63651533 65651551 65651729 69651730 69651830 54651851 52651852 52651853 52661173 67100085 (Hasp) 71104104-XXX 71104174-X 71104253-2 7123644-400 7327520-XXX 6131680-XXX 53612041-X 4613112-XXF-C 10613123-XXF-C 14613124-XXF-C 18622701-6 54622702-10 54622702-6 5462808X-X 51

641523-1 6365030-1-B 65650408-X 7650408-X-X 7650409-X 8650439-XXX 25650453-X 9650483-X4X 12650484-X4X 15650485-X4X 19650491-X43-B 36650492-X43-B 40650540-1 32650541-1 32650542-1 33650543-1 33650639-X4B 27650640-X4B 26650683-X4X 16650683-X4X 20650684-X4X 21650685-X4X 23650691-X43-B 41650692-X43-B 48650839-X4G-B 29650840-X4G-B 28650863-X4D-B 22650866-X6D-B 11650867-X6D-B 13650871-XX4-B 37650875-XXX-X 38650888-XXX 42650889-XXX 47650891-XXX-X 46650963-XXX-X 24650967-XXX-X 17650971-XXX-X 43650989-XXD 49651104-X 536513X 51651412-X 68651418-XX-X 68651418-XX-X 68651420-XX 68651420-XXX 68651421-XX 68

651422-XX 68651422-XXX 68651500-1 6565151X-XX-X 63 - 6465151X-X 64651535-2 63651537-1 63651555-B 6565161X-X 55 - 5665161X-XX 55 - 56651747-X-X 67651780-XXX-X 60 - 61651790-XXX-X 60 - 61651791-XXX-X 6065184X-X 5765809-X 6565888-X 6565888-XX 6565986-1 54661XX 51661XX-X 5166248-X 5866333-B 7366334-B 7366353-1 5566354-1 5566500X 6266516-X 5866517-X 5866541-X 64665XX-X 5166731-X 5766732-X 5767120-P4X 4467121-P4X 4567140-1 5467187-1 5267187-2 5267195-X 5967196-X 5991020-1 5491020-2 5491192-X 6891363-10 5791364-10 5793505-1 61

93506-1 6193507-1 6193944-XX 6893944-XXX 6893945-XX 6893945-XXX 68C28121-800 69C28241-810 69C28351-600 70CAT66P-XXX-X 71CHW 72CHW-30 72CSN 72CSN-30 72H253SS-XXX-X 71H254SS-XXX-X 71MQ3728-XXX-X 71MQ3729-XXX-X 71MQ3729-XXX-X 71NM2202X-X1-X31 5NM2304X-X1-X11 6NM2322X-11-P4X 39NP322L0X-X 30NP322R0X-X 31NP443R01-1 33NP4-XXR-XX-XXX 34NP6-XXR-XX-XXX 35NP8-XXR-XX-XXX 35P29122-600 69P29241-610 69P29351-600 70P29351-604 70TB022B-XXX-X 71TB035B-XXX-X 71TB03EB-XXX-X 71TB045B-XXX-X 71TB04EB-XXX-X 71TB066B-XXX-X 71TB06EB-XXX-X 71TCXXX 66TCXXXX 66TCXXXX-X 66

Table of Contents 2Extrusion Informations 3

2-Ball Piston Pumps 4- 244-Ball Piston Pumps 25 - 29

Extrusion Packages 30 - 35Extrusion Pumps 36 - 49

Accessories 50 - 73Warranty and Noises 74

Emissions

Table of contents

Extrusion pumpsExtrusion pumps are frequently put inthe most difficult of applications:moving high viscosity fluids. Extrusionpumps are used to apply a bead ofmaterial. In some instances the pumpsupplies a continuous bead; otherapplications call for intermittentdelivery. Typical high-viscosity fluidspumped include caulkings, heavylubricants, mastics, sealers and inks.

1

2

4

4

6

5

710

9

8

Typical Extrusion Applications

F-R-L Kit AssemblyARO-STOP® Over-run ControlTwo Post RamDownstream Fluid RegulatorAutomatic Extrusion GunExtrusion Gun Nozzle KitSingle Post RamSwivelManual Extrusion GunExtrusion Nozzle Kit

Application parametersViscosity is the largest obstacle in anextrusion application. As viscositiesincrease, fluid flow decreases. Ingeneral, 2-ball pumps can be used forfluids with viscosities up to 50,000cPs. Chop-check pumps are forhigher viscosity fluids. Pump ratios inextrusion applications range from 9:1to 65:1.

Additional equipment is needed tokeep an extrusion pump primed.Follower plates, lifts and rams assistthe flow of material into the pumpinlet. Without this equipment, thefluid will not “flow” into the pump.Lifts can be used for fluids withviscosities up to 200,000 cPs. Ramsare needed for fluids with higherviscosities. If a fluid is stringy, a Rammay be needed for fluids withviscosities as low as 60,000 cPs.

Extrusion pumps also use fluid massto keep the pump primed. When bulktanks are used, the weight of the fluidwill push it into the pump inlet.

Accessories requiredSeveral accessories will improve theefficiency of an Extrusionapplication. They include:

Follower Plates: Plates mount directly topump inlet. Fluid is assisted into pump.Available for 20 liters pails and 200 litersdrums. Follower Seals: Forms seal betweenFollower Plate and Container to maintainprime. Available in Single or Double LipModels. Use Single-Lip Wiper forviscosities up to 300,000 cP. Double LipWiper provides better wiping action onhigher viscosity fluids. Use Double-LipWipers for fluids viscosities over300,000 cP.Lifts: Eases change over of emptycontainers. An internal cylinder lifts thepump from the container. Weight of airmotor, pump and mounting bracketmaintain pump prime. Used on mediumto high viscosity fluids. Available for 20and 200 liters containers.Rams: Function like a lift, but also exertdownward force. Ram air cylinders pushpump and follower plate into the fluid.Available in single or two-postconfigurations, for 5 or 55-galloncontainers. Used on medium to highviscosity fluids.Portability Kits: For single-post rammounted pumps. Wheels bolt onto baseof ram. Eases portability of unit aroundapplication site.Floor Mounts: Used when fluid is storedin large, bulk containers. Gravity feedsmaterial into the pump inlet. Locate asclose to fluid container as possible.Downstream Fluid Regulators: Used tocontrol fluid pressure at the dispensepoint. Downstream regulators cut fluidpressure to desired level. Also used toeliminate pulsation to provide evenconsistent flow of material.Extrusion Guns: Used to dispense fluidswith viscosities above 200,000 cPs.Available in manual or automaticconfigurations. “Snuff-back” gunseliminate drool at work site. Extrusion Nozzle Kit: For manual orautomatic extrusion guns. Size of orificediameter controls size of bead extrudedfrom the gun.

EXTRUSION INFORMATIONS

1

2

3

4

5

6

7

8

9

10

3

1:1 / 34,1 Lpm / 2-ball • Piston Pumps

Pump PerformanceAir Inlet Pressure Range 0-10.3 barsFluid Pressure Range 0-10.3 barsMax. Rec’d Cycles Per Minute 75Displacement Per Cycle 18.8Volume/Cycle 307.7 mlCycles Per Liter 46.5Flow @ 60 Cycles / Minute 68.1-lpmNoise Level @ 4.15 bars 77.8 db (A)

Pump SpecificationsLower Pump Material Carbon SteelPlunger Material Carbon SteelCylinder Material Carbon SteelMotor Repair Kit 637084Motor Diameter 2”Stroke 6”Air Inlet 1/4-18NPTF-1 (F)Lower Pump Repair Kit 637081 (Buna)

637083 (Teflon)Material Inlet ImmersedMaterial Outlet 3/4”-14NPTF-1 (F)Weight 612041-X : 5.9 Kgs.

612042-X : 6.4 Kgs.

AccessoriesAIR F/R/L: C28123-600Wall Mount: 61113Muffler: 61879AIR Line Oil: 62274 (0,95 l)Needle Valve: 104104-N02AroStop: 635040

4

Ordering6 1 2 0 4 1 - X

Packings:1 : Buna3 : Teflon

1343.8 mm

879.

5 m

m

612041-X

2-b

all P

um

ps

5

2:1,Stainless Steel, Carbon Steel-Constructed • Piston Pumps

868 mm

NM2202A-11-X31

C O AT I N G ™

Accessories61113 Wall Mount BracketFor open-head drum or wall-mounting,bracket features heavy-duty construction with all necessary hardware for quick installation.66073-1 Air Line Connection KitKit includes ARO air filter/regulator with 1,50 m length of airhose, gauge and coupler/connector.67088-4 Sealed Bung AssemblyUsed for inert blanket applications.

Needle Valve: 104104-N02AroStop: 635040

508.8 mm

Pump PerformanceAir Inlet Pressure Range 2-10.3 barsFluid Pressure Range 4.8-24.2. barsMax. Rec’d Cycles / Minute 120Displacement Per Cycle 8.3 cm3

Cycles Per Liters 106Flow @ 60 Cycles/Minute 8.14 lpmNoise Level @ 7 Bars 80 db (A)

Pump SpecificationsLower Pump Material NM2202A-X1-X31:Carbon Steel

NM2202B-X1-X31: Stainless Steel 316Plunger Material NM2202A-X1-X31: Carbon Steel

NM2202B-X1-X31: Stainless Steel 316Air Motor: 63716Motor Repair Kits 637377Lower Pump Motor Kits 637379-X31(Stain. Steel)Air Motor Diameter 2”Stroke 3”Air Inlet 1/4 -18 NPTF-1Lower Pump Repair Kit NM2202A-X1-X31: 637378-X31

NM2202B-X1-X31: 637379-X31Material Inlet NM2202A-11-X31: 1-1/2 –11-1/2 NPTF-1 (F)

NM2202A-41-X31: immersed inletNM2202B-11-X31: 1-1/4 –11-1/2 NPTF-1 (F)NM2202A-41-X31: immersed inlet

Material Outlet 3/4 - 14 NPTF-1Max. Working Flow Rate 16.3 lpmVolume / Cycle 135.6 mlWeight NM2202A-11-X31: 7.9 Kgs

NM2202A-41-X31: 8.9 KgsNM2202B-11-X31: 7.8 KgsNM2202B-41-X31: 10.2 Kgs

OrderingN M 2 2 0 2 X - X 1 - X 3 1

Type:1 : Stub (Wall Mount)4 : 200 Liters

Packing:7 : Ryton-Filled Teflon/TeflonC : UHMW-PE/UHMW-PEJ : Polyurethane/UHMW-PE

Material:A : Carbon SteelB : Stainless Steel

2-b

all P

um

ps


Pump PerformanceAir Inlet Pressure Range 10.2 barsFluid Pressure Range 8.1-40.8 barsMax. Rec’d Cycles Per Minute 120Displacement Per Cycle 134.3 cm3

Cycles Per Liters 7.4Flow @ 120 Cycles / Minute 15.8-lpmNoise Level @ 7 bars 85 db(A)

Pump SpecificationsLower Pump Material Carbon SteelPlunger Material Carbon SteelAir Motor 66913Motor Repair Kit 637316Motor Diameter 3”Stroke 3”Air Inlet 1/4” - 18 NPTF (f)Lower Pump Repair Kit 637176 for NM2304A-X1-311

637228 for NM2304B-X1-C11Material Inlet 1-1/2”-11-1/2 NPTF (f)Material Outlet 3/4”-14 NPTF (f)Weight NM2304X-11-311 = 14.5 Kgs.

NM2304X-41-311 = 20.9 Kgs.2” Bung Adapter Included

OrderingN M 2 3 0 4 X - X 1 - X 1 1

Type:1 : Stub (Wall Mount)4 : 200 Liters8 : Universal (Stube)

(Without Bung)9 : 200 Liters (Without Bung)A : Stube Follower PlateB : Universal (Stube With Alternet Bung)

Accessories

6

AIR F/R: P29122-600Wall Mount: 61113Wet Sol: 66333-B (0,95 l)Needle Valve: 104104-N02AroStop: 635040

Packing:C : UHMW-PE (Upper/Lower)3 : Glass-Filled Teflon (Upper)

Virgin Teflon (Lower)5 : GLass Filed Teflon / Leather

Staggered (Upper)Virgin Teflon (Lower)

NM2304A-11-311Stub

TM

820.4 mm

1463 mm

345.4 mm

990.

6 m

m

Material:A : Carbon SteelB : Stainless Steel

2-b

all P

um

ps

7


Pump PerformanceAir Inlet Pressure Range 2 - 8.3 barsFluid Pressure Range 18.3 - 91.8 barsMax. Rec’d Cycles Per Minute 60Displacement Per Cycle 180.2 cm3

Cycles Per Liter 5.5Flow @ 60 Cycles / Minute 10.8 lpmNoise Level @ 4 bars 80 db(A)

Pump SpecificationsLower Pump Material 316 Stainless SteelPlunger Material 316 Stainless SteelCylinder Material Stainless SteelAir Motor 65444-BMotor Repair Kit 61268Motor Diameter 4-1/4”Stroke 4”Air Inlet 1/2” NPT(F)Lower Pump Model 65108/65108-XLower Pump Repair Kit 637010 for 650408-B / 650408-5-B

637010-4 for 650408-4-B / 650408-6-BMaterial Inlet 1-1/4” NPT(F)Material Outlet 3/4” NPT(F)Weight 15.8 kgs.

Ordering

246.8 mm

803.2 mm

650408-B650408-X-B

C O AT I N G ™

AccessoriesAir F/R/L: C28241-810Wall Mount: 66100Airline Oil: 62274Muffler: 91790Wet Sol: 66333-BNeedle Valve: 104104-N04AroStop: 23644-400

6 5 0 4 0 8 - B Packings: Teflon (Upper & Lower)

6 5 0 4 0 8 - X - B

Packings:4 : UHMW-PE (Upper & Lower)5 : Teflon, w/Ultra Coated Tube and

Rod (Upper & Lower)6 : UHMW-PE, w/Ultra Coated Tube

and Rod (Upper & Lower)

2-b

all P

um

ps




Pump SpecificationsLower Pump Material 316 Stainless SteelPlunger Material 316 Stainless SteelCylinder Material Stainless SteelAir Motor 65444-BMotor Repair Kit 61268Motor Diameter 4-1/4”Stroke 4”Air Inlet 1/2” NPT(F)Lower Pump Model 65106 for 650409

65106-4 for 650409-4Lower Pump Repair Kit 637010 for 650409

637010-4 for 650409-4Material Inlet 1-1/4” NPSM(F)Material Outlet 3/4” NPT(F)Weight 203 kgs.

Ordering6 5 0 4 0 9 Packings: Teflon (Upper & Lower)

6 5 0 4 0 9 - X

Packings:4 : UHMW-PE (Upper & Lower)


8

1405 mm

844.5 mm

650409650409-4

2-b

all P

um

ps

9



Pump SpecificationsLower Pump Material Carbon SteelPlunger Material Carbon Steel (Hard Chrome)Cylinder Material Carbon SteelAir Motor 65445-BMotor Repair Kit 61268Motor Diameter 4-1/4”Stroke 4”Air Inlet 1/2” NPT(F)Lower Pump Model 650453-XLower Pump Repair Kit 637177 for 650453-5Order parts separately for 650453-7, -8, -9Material Inlet 1-1/2”NPT for 650453-7 / 650453-9

Immersed for 650453-5 / 650453-8Material Outlet 3/4” NPT(F)Weight 15.8 kgs. for 650453-7 / 650453-9

22.2 kgs. for 650453-5 / 650453-8

Ordering6 5 0 4 5 3 - X

Packings:Leather/TeflonTeflonUHMW-PE/LeatherUHMW-PE


828 mm

1511 mm

942 mm

266.7mm

STUB

200 liters650453-X


Type:7 : Stub (Wall Mount)5 : 200 Liters9 : Stub (Wall Mount)8 : 200 Liters

2-b

all P

um

ps



Cycles Per Liter 1.0Flow @ 60 Cycles / Minute 56.7 lpmNoise Level @ 4 bars 88 db(A) w/muffler

Pump SpecificationsLower Pump Material 300 Stainless SteelPlunger Material 304 Stainless Steel (Hard Chrome)Cylinder Material 304 Stainless Steel (Hard Chrome)Air Motor 66523-BMotor Repair Kit 66614Motor Diameter 8”Stroke 6”Air Inlet 3/4” NPT(F)Lower Pump Model 66942-XXFLower Pump Repair Kit 637211-XXXMaterial Inlet 2” NPTF-1Material Outlet 1-1/4” NPTF-(f)Weight 46.3 kgs.

Ordering6 1 3 1 1 2 - X X F - C

Packings:C6 : UHMW-PEK3 : CG-Filled Teflon with, Buna N EnergizerL6 : Mineral-Filled TeflonP6 : UHMW-PE/Teflon StaggeredR6 : Teflon/UHMW-PE Staggered

AccessoriesReference Mounting Footprint “A” for related rams/accessories

Air F/R/L: 28353Wall Mount: 66542Mounting Post: 67187-1Airline Oil: 62274Muffler: 92460Wet Sol: 66333-BFloor/Follower Adpt. 67136Needle Valve: 104104-N06AroStop: 635043

10

1172.3 mm

640.5 mm

372.2 mm

613112-XXF-C

2-b

all P

um

ps

11




Pump SpecificationsLower Pump Material 400 Stainless SteelPlunger Material 15-5 Stainless Steel (Hard Chrome)Cylinder Material 15-5 Stainless Steel (Hard Chrome)Air Motor 66523-BMotor Repair Kit 66614Motor Diameter 8”Stroke 6”Air Inlet 3/4” NPT(F)Lower Pump Model 66941-X6DLower Pump Repair Kit 637211-XXXMaterial Inlet 2” NPT(M)Material Outlet 1-1/4” NPT(F)Weight 46.3 kgs.

Ordering6 5 0 8 6 6 - X 6 D - B

Packings:C : UHMW-PEP : UHMW-PE/Teflon / StaggeredL : Mineral-Filled TeflonR : Teflon/UHMW-PE Staggered


Air F/R/L: 28353Wall Mount: 66542Mounting Post: 67187-1Airline Oil: 62274Muffler: 92460Wet Sol: 66333-BFloor/Follower Adpt. 67136 Needle Valve: 104104-N06AroStop: 635043

1172.3 mm

640.5 mm

372 mm

650866-X6D-B

2-b

all P

um

ps

11:1 / 13,9 Lpm / 2-ball • Piston Pumps • Integrity


Cycles Per Liter 4.2Flow @ 60 Cycles / Minute 13.9 lpmNoise Level @ 4 bars 81.8 db(A)

Pump SpecificationsLower Pump Material 300 Stainless SteelPlunger Material 17-4 Stainless SteelCylinder Material 316 Stainless SteelAir Motor 65465-BMotor Repair Kit 61268Motor Diameter 4-1/4”Stroke 6”Air Inlet 1/2”NPT(F)Lower Pump Model 66300-X4XLower Pump Repair Kit 637305-X4XMaterial Inlet 1” NPT(F) / 2” NPT(M)Material Outlet 1” NPTF-1(F)Weight 19.5 kgs.

Ordering6 5 0 4 8 3 - X 4 X

Packings:3 : TeflonC : UHMW-PEG : UHMW-PEP : UHMW-PE/Leather (Upper)

UHMW-PE (Lower)R : UHMW-PE (Upper), Teflon (Lower)

AccessoriesReference Mounting Footprint “A” or “D”for related rams/accessories

Air F/R/L: C28241-810Airline Oil: 62274Air Motor Muffler: 91790Wet Sol: 66333-BWall Mount: 66101Floor/Follower Adpt. 67136 Floor Mount: 65138Needle Valve: 104104-N04AroStop: 23644-400

12

C O AT I N G ™

®

(322 mm)

481 mm

1009 mm

650483-X4X

Plungers:3 : 17-4 Stainless Steel

Hard Chrome PlatedB : 17-4 Stainless Steel

“Ultra” Coated

2-b

all P

um

ps

13




Pump SpecificationsLower Pump Material 400 Stainless SteelPlunger Material 15-5 Stainless Steel (hard Chrome)Cylinder Material 15-5 Stainless Steel (hard Chrome)Air Motor 66651-BMotor Repair Kit 637110Motor Diameter 10”Stroke 6”Air Inlet 3/4” NPT(F)Lower Pump Model 66941-X6DLower Pump Repair Kit 637211-XXX Material Inlet 2” NPT(M)Material Outlet 1-1/4” NPT(F)Weight 56.8 kgs.

Ordering6 5 0 8 6 7 - X 6 D - B

Packings:C : UHMW-PE L : Mineral-Filled TeflonP : UHMW-PE/Teflon (Upper),

UHMW-PE (Lower)R : Teflon/UHMW-PE (Upper), Teflon

(Lower)


Air F/R/L: 28353Wall Mount: 66542Airline Oil: 62274Muffler: 66718Wet Sol: 66333-BFloor/Follower Adpt. 67136 Needle Valve: 104104-N06AroStop: 635043

1143 mm

640.5 mm

370.8 mm

650867-X6D-B

2-b

all P

um

ps


Pump PerformanceAir Inlet Pressure Range 2 - 6.1 barsFluid Pressure Range 91.8 barsMax. Rec’d Cycles Per Minute 60Displacement Per Cycle 981.5 cm3


Pump SpecificationsLower Pump Material 300 Stainless SteelPlunger Material 304 Stainless Steel (Hard Chrome)Cylinder Material 304 Stainless Steel (Hard Chrome)Air Motor 66651-BMotor Repair Kit 637110Motor Diameter 10”Stroke 6”Air Inlet 3/4” NPT(F)Lower Pump Model 66942-XXFLower Pump Repair Kit 637211-XXXMaterial Inlet 2” NPT(M)Material Outlet 1-1/4” NPT(F)Weight 56.8 kgs.

Ordering AccessoriesReference Mounting Footprint “A” for related rams/accessories

Air F/R/L: 28353Wall Mount: 66542Airline Oil: 62274Muffler: 66718Wet Sol: 66333-BFloor/Follower Adpt.: 67136 Floor Mount: 65138Needle Valve: 104104-N06AroStop: 635043

14

372.2 mm

1144.5 mm

640.5 mm

613123-XXF-C

6 1 3 1 2 3 - X X F - C

Packings:C6 : UHMW-PEK3 : CG-Filled Teflon with, Buna N EnergizerL6 : Mineral-Filled TeflonP6 : UHMW-PE/Teflon (Upper), UHMW-PE (Lower)R6 : Teflon/UHMW-PE (Upper), Teflon (Lower)

2-b

all P

um

ps


Ordering6 5 0 4 8 4 - X 4 X

Packings:3 : TeflonC : UHMW-PEG : UHMW-PE/Leather StaggeredP : UHMW-PE/Teflon Staggered (Upper),

UHMW-PE (Lower)R : Teflon/UHMW-PE Staggered (Upper),

Teflon (Lower)

AccessoriesAir F/R/L: C28241-810Wall Mount: 66100Airline Oil: 62274Muffler: 91790Wet Sol: 66333-BFloor/Follower Adpt.: 66136Floor Mount: 65138Needle Valve: 104104-N04AroStop: 23644-400

Pump PerformanceAir Inlet Pressure Range 2 - 8.3 barsFluid Pressure Range 44.8 - 224.4 bars Max. Rec’d Cycles Per Minute 60Displacement Per Cycle 122.9 cm3


Pump SpecificationsLower Pump Material 300 Stainless SteelPlunger Material 17-4 Stainless SteelCylinder Material 316 Stainless SteelAir Motor 65465-BMotor Repair Kit 61268Motor Diameter 4-1/4”Stroke 6”Air Inlet 1/2” NPT(F)Exhaust Port 1-1/4” NPT(F)Lower Pump Model 66301-X4XLower Pump Repair Kit 637306-X43Material Inlet 1” NPT(F) 2” NPT(M)Material Outlet 1” NPT(F)Weight 19.5 kgs.

15

Plungers:3 : 17-4 S. S. Hard

Chrome PlatedB : 17-4 S.S. “Ultra”

Coated

1009 mm

322 mm

481 mm

650484-X4X

C O AT I N G ™

®

2-b

all P

um

ps



Cycles Per Liter 4.2Flow @ 60 Cycles / Minute 13.9 lpNoise Level @ 4 bars 84.8 db(A)

Pump SpecificationsLower Pump Material 300 Stainless SteelPlunger Material 17-4 Stainless SteelCylinder Material 316 Stainless SteelAir Motor 65665-BMotor Repair Kit 61355Motor Diameter 6”Stroke 6”Air Inlet 1/2” NPTFExhaust Port 1-1/4” NPTFLower Pump Model 66300-X4XLower Pump Repair Kit 637305-X43Material Inlet 1” NPT(F) 2” NPT(M)Material Outlet 1” NPTFWeight 21 kgs.


Air F/R/L: C28241-810Airline Oil: 62274Air Motor Muffler: 91790Wet Sol: 66333-BWall Mount: 66100Floor/Follower Adpt.: 67136Floor Mount: 65138Needle Valve: 104104-N04AroStop: 23644-400

16

Ordering6 5 0 6 8 3 - X 4 X



Teflon (Lower)



Coated

C O AT I N G ™

®

1009 mm

322 mm

481 mm

650683-X4X

2-b

all P

um

ps

17




Pump SpecificationsLower Pump Material 400 Stainless SteelPlunger Material 15-5 Stainless Steel (Hard Chrome)Cylinder Material 15-5 Stainless Steel (Hard Chrome)Air Motor 66506-BMotor Repair Kit 637112Motor Diameter 12”Stroke 6”Air Inlet 3/4” NPT(F)Lower Pump Model 66941-X6DLower Pump Repair Kit 637211-XXXMaterial Inlet 2” NPT(M)Material Outlet 1-1/4” NPT(F)Weight 63.6 kgs.

Ordering6 5 0 9 6 7 - X 6 D - B

Packings:C : UHMW-PEL : Mineral-Filled TeflonP : UHMW-PE/Teflon (Upper), UHMW-PE (Lower)R : Teflon/UHMW-PE (Upper), Teflon (Lower)


Air F/R/L: 28353Wall Mount: 66542Airline Oil: 62274Muffler: 66718Wet Sol: 66333-BFloor/Follower Adpt.: 67136 Floor Mount: 65138Needle Valve: 104104-N06AroStop: 635043

1143 mm

370.8 mm

640.5 mm

650967-X6D-B

2-b

all P

um

ps




Pump SpecificationsLower Pump Material 300 Stainless SteelPlunger Material 304 Stainless Steel (Hard Chrome)Cylinder Material 304 Stainless Steel (Hard Chrome)Air Motor 66506-BMotor Repair Kit 637112Motor Diameter 12”Stroke 6”Air Inlet 3/4” NPT(F)Lower Pump Model 66942-XXFLower Pump Repair Kit 637211-XXXMaterial Inlet 2” NPT(M)Material Outlet 1-1/4” NPT(F)Weight 63.6 kgs.

AccessoriesReference Mounting Footprint “A” for related rams/accessoriesAir F/R/L: 28353Wall Mount: 66542Airline Oil: 62274Muffler: 66718Wet Sol: 66333-BFloor/Follower Adpt.: 67136Floor Mount: 65138Needle Valve: 104104-N06AroStop: 635043

18

Ordering6 1 3 1 2 4 - X X F - C

Packings:C6 : UHMW-PEK3 : CG-Filled Teflon with, Buna N EnergizedL6 : Mineral-Filled TeflonR6 : Teflon/UHMW-PE (Upper), Teflon (Lower))

1143 mm

370.8 mm

640.5 mm

613124-XXF-C

2-b

all P

um

ps



Cycles Per Liter 11Flow @ 60 Cycles / Minute 4.9 lpmNoise Level @ 4 bars 81.8 db(A)

Pump SpecificationsLower Pump Material 300 Stainless SteelPlunger Material 17-4 Stainless SteelCylinder Material 316 Stainless SteelAir Motor 65465-BMotor Repair Kit 61268Motor Diameter 4-1/4”Stroke 6”Air Inlet 1/2” NPT(F)Exhaust Port 1-1/4” NPT(F)Lower Pump Model 66302-X4XLower Pump Repair Kit 637307-X43Material Inlet 1” NPT(F) 2” NPT(M)Material Outlet 1” NPT(F)Weight 19.5 kgs.


Air F/R/L: C28241-810Airline Oil: 62274Air Motor Muffler: 91790Wet Sol: 66333-BFloor/Follower Adpt.: 67136 Floor Mount: 65138Needle Valve: 104104-N04AroStop: 23644-400

19

Ordering6 5 0 4 8 5 - X 4 X

Packings:3 : Teflon

C : UHMW-PEG : UHMW-PE/Leather StaggeredP : UHMW-PE/Teflon Staggered (Upper),


Teflon (Lower)



Coated

650485-X4X

C O AT I N G ™

®

1009.3 mm

481 mm

322 mm

2-b

all P

um

ps



Cycles Per Liter 4.2Flow @ 60 Cycles /mn 13.9 lpmNoise Level @ 4 bars 89.8 db(A)

Pump SpecificationsLower Pump Material 300 Stainless SteelPlunger Material 17-4 Stainless SteelCylinder Material 316 Stainless SteelAir Motor 66523-BMotor Repair Kit 66614Motor Diameter 8”Stroke 6”Air Inlet 3/4” NPT(F)Exhaust Port 1-1/4” NPT(F)Lower Pump Model 66300-X4XLower Pump Repair Kit 637305-X43Material Inlet 1” NPT(F) 2” NPT(M)Material Outlet 1” NPT(F)Weight 30.9 kgs.

AccessoriesReference Mounting Footprint “A” or “D”for related rams/accessoriesAir F/R/L: 28353Airline Oil: 62274Air Motor Muffler: 92460Wet Sol: 66333-BFloor/Follower Adpt.: 67136Rams: Page 57Floor Mounts: 65138Needle Valve: 104104-N06AroStop: 635043

20

Ordering6 5 0 8 8 3 - X 4 X



Teflon (Lower)

Plungers:D : 17-4 S. S. Hard

Chrome PlatedG : 17-4 S.S. “Ultra”

Coated

1106 mm

575 mm

322 mm

650883-X4X-B

C O AT I N G ™

®

2-b

all P

um

ps




Pump SpecificationsLower Pump Material 300 Stainless SteelPlunger Material 17-4 Stainless SteelCylinder Material 316 Stainless SteelAir Motor 65665-BMotor Repair Kit 61355Motor Diameter 6”Stroke 6”Air Inlet 1/2” NPT(F)Lower Pump Model 66301-X4XLower Pump Repair Kit 637306-X43Material Inlet 1” NPT(F) 2” NPT(M)Material Outlet 1” NPT(F)Weight 21 kgs.


Air F/R/L: C28241-810Airline Oil: 62274Air Motor Muffler: 91790Wet Sol: 66333-BWall Mounts: 66101Floor/Follower Adpt.: 67136 Floor Mount: 65138Needle Valve: 104104-N04AroStop: 23644-400

21

Ordering6 5 0 6 8 4 - X 4 X



Teflon (Lower))



Coated

1009 mm

322 mm

481 mm

650684-X4X

C O AT I N G ™

®

2-b

all P

um

ps


AccessoriesReference Mounting Footprint “B” for related rams/accessories

Air F/R/L: 28353Airline Oil: 62274Air Motor Muffler: 66718Wet Sol: 66333-BWall Mount: 66542Floor Mounts: 65139Needle Valve: 104104-N06AroStop: 635043

22


Cycles Per Liter 3.0Flow @ 60 Cycles / Minute 20.4 lpmNoise Level @ 4 bars 82 db(A) w/66718 muffler

Pump SpecificationsLower Pump Material Carbon SteelPlunger Material 17-4 Stainless Steel (Hard Chrome)Cylinder Material 420 Stainless SteelAir Motor 66651-BMotor Repair Kit 637110Motor Diameter 10”Stroke 6”Air Inlet 3/4” NPT(F)Lower Pump Model 66475-X4DLower Pump Repair Kit 637098-XXXMaterial Inlet 2” NPT(F)Material Outlet 1” NPT(F)Weight 60 kgs.

Ordering6 5 0 8 6 3 - X 4 D - B

Packings:3 : TeflonC : UHMW-PEG : UHMW-PE/Leather StaggeredP : UHMW-PE/Teflon StaggeredR : Teflon/UHMW-PE Staggered

429 mm

1166 mm

650863-X4D-B

2-b

all P

um

ps


Pump PerformanceAir Inlet Pressure Range 2 - 8.3 barsFluid Pressure Range 124 - 408 barsMax. Rec’d Cycles Per Minute 60Displacement Per Cycle 90.1 cm3


Pump SpecificationsLower Pump Material 300 Stainless SteelPlunger Material 17-4 Stainless SteelCylinder Material 316 Stainless SteelAir Motor 65665-BMotor Repair Kit 61355Motor Diameter 8”Stroke 6”Air Inlet 1/2” NPT(F)Lower Pump Model 66302-X4XLower Pump Repair Kit 637307-X43Material Inlet 1” NPT(F) 2” NPT(M)Material Outlet 1” NPT(F)Weight 21 kgs.

AccessoriesReference Mounting Footprint “A” or“D” for related rams/accessories

Air F/R/L: C28241-810Airline Oil: 62274Air Motor Muffler: 91790Wet Sol: 66333-BWall Mounts: 66101Floor/Follower Adpt. 67136Floor Mount: 65138Needle Valve: 104104-N04AroStop: 23644-400

23

Ordering6 5 0 6 8 5 - X 4 X



Teflon (Lower)



Coated

1009 mm

322 mm

481 mm

C O AT I N G ™

®

650865-X4X

2-b

all P

um

ps


Pump PerformanceAir Inlet Pressure Range 2 - 6.1 barsFluid Pressure Range 132.6 - 442 barsMax. Rec’d Cycles Per Minute 60Displacement Per Cycle 339 cm3

Cycles Per Liter 2.9Flow @ 60 Cycles / Minute 20.4 lpmNoise Level @ 4 bars 88 db(A) w/66718 muffler

Pump SpecificationsLower Pump Material Carbon SteelPlunger Material 17-4 Stainless Steel (Hard Chrome)Cylinder Material 420 Stainless SteelAir Motor 66506-BMotor Repair Kit 637112Motor Diameter 12”Stroke 6”Air Inlet 3/4” NPT(F)Lower Pump Model 66475-X4DLower Pump Repair Kit 637098-XXXMaterial Inlet 2” NPT(F)Material Outlet 1” NPT(F)Weight 66.8 kgs.


Air F/R/L: 28353Airline Oil: 62274Air Motor Muffler: 66718Wet Sol: 66333-BWall Mounts: 66542Floor Mount: 65139Needle Valve: 104104-N06AroStop: 635043

24

Ordering6 5 0 9 6 3 - X 4 D - B

Packings:3 : TeflonC : UHMW-PEG : UHMW-PE/Leather StaggeredP : UHMW-PE/Teflon StaggeredR : Teflon/UHMW-PE Staggered

1167.5 mm

4087 mm

662.7 mm

65650963-X4D-B

2-b

all P

um

ps


Pump PerformanceAir Inlet Pressure Range 2 - 10.2 barsFluid Pressure Range 4 - 20.4 barsMax. Rec’d Cycles Per Minute 60Displacement Per Cycle 1345 cm3


Pump SpecificationsLower Pump Material 316 Stainless Steel Plunger Material 17-4 Stainless Steel “Ultra” CoatedCylinder Material 304 Stainless Steel “Ultra” CoatedAir Motor 65465-BMotor Repair Kit 61268Motor Diameter 4-1/4”Stroke 6”Air Inlet 1/2” NPT(F)Lower Pump End Series 67200-X4BLower Pump Repair Kit 637317-X4BMaterial Inlet 2” NPTF(M) / 1-1/2” NPTF(F)Material Outlet 1” NPTF(F)Weight 30.8 kgs.

Ordering6 5 0 4 3 9 - X 4 B

Packings:7 : TeflonC : UHMW-PEF : UHMW-PE/Leather (Upper), UHMW-PE (Lower)P : UHMW-PE/Teflon (Upper), UHMW-PE (Lower)R : Teflon/UHMW-PE (Upper), Teflon (Lower)

AccessoriesAir F/R/L: C28241-810Wall Mount: 66101Muffler: 91790Airline Oil: 62274Wet Sol: 66333-BMounting Post: 67187-1Needle Valve: 104104-N04AroStop: 23644-400

25

C O AT I N G ™

1087 mm

558 mm

496 mm

650439-X4B

C O AT I N G ™

4-b

all P

um

ps




Pump SpecificationsLower Pump Material CF8M (316) Stnls. SteelPlunger Material 17-4 Stnls. Steel, “Ultra” CoatedCylinder Material 304 Stnls. Stl. “Ultra” CoatedAir Motor 65665-BMotor Repair Kit 61355Motor Diameter 6”Stroke 6” Air Inlet 1/2”Lower Pump End Series 67201-X4BLower Pump Repair Kit 637318-X4BMaterial Inlet 2”NPT(M) / 1-1/2” NPT(F)Material Outlet 1” NPTFWeight 33.2 kgs.

AccessoriesAir F/R/L: C28241-810Wall Mount: 66101Muffler: 91790Airline Oil: 62274Wet Sol: 66333-BMounting Post: 67187-1Needle Valve: 104104-N04AroStop: 23644-400

26

Ordering6 5 0 6 4 0 - X 4 B


558 mm

1087 mm

496 mm

650640-X4B

C O AT I N G ™

4-b

all P

um

ps


Pump PerformanceAir Inlet Pressure Range 2 - 10.2 barsFluid Pressure Range 8.1 - 40.8 barsMax. Rec’d Cycles Per Minute 60Displacement Per Cycle 1345 cm3

Cycles Per Liter 0.74Flow @ 60 Cycles / Minute 80.6 lpmNoise Level @ 4 bars 84.8 db (A)

Pump SpecificationsLower Pump Material CF8M (316) Stns. SteelPlunger Material 17 - 4 Stns. Steel, “Ultra” CoatedCylinder Material 304 Stnls. Stl. “Ultra” CoatedAir Motor 65665-BMotor Repair Kit 61355Motor Diameter 6”Stroke 6”Air Inlet 1/2”NPT(F)Lower Pump End Series 67200-X4BLower Pump Repair Kit 637317-X4BMaterial Inlet 2” NPT(M) / 1-1/2” NPT(F)Material Outlet 1” NPT(F)Weight 32.3 kgs.

Ordering6 5 0 6 3 9 - X 4 B


AccessoriesAir F/R/L: C28241-810Wall Mount: 66101Mounting Post: 67187-1Airline Oil: 62274Muffler: 91790Wet Sol: 66333-BNeedle Valve: 104104-N04AroStop: 23644-400

27

558 mm

1087 mm

496 mm

650639-X4B

C O AT I N G ™

4-b

all P

um

ps




Pump SpecificationsLower Pump Material CF8M (316) Stns. SteelPlunger Material 17 - 4 Stns. Steel, “Ultra” CoatedCylinder Material 304 Stnls. Stl. “Ultra” CoatedAir Motor 66523-BMotor Repair Kit 66614Motor Diameter 8”Stroke 6”Air Inlet 3/4” NPT(F)Lower Pump End Series 67201-X4GLower Pump Repair Kit 637318-X4CMaterial Inlet 2” NPT(M) / 1-1/2” NPT(F)Material Outlet 1” NPT(F)Weight 43.5 kgs.

AccessoriesAir F/R/L: 28353Wall Mount: 66542Mounting Post: 67187-1Airline Oil: 62274Muffler: 92460Wet Sol: 66333-BNeedle Valve: 104104-N06AroStop: 635043

28

Ordering6 5 0 8 4 0 - X 4 G - B


C O AT I N G ™

1184 m

652 mm

496 mm

650840-X4G-B

4-b

all P

um

ps

29




Pump SpecificationsLower Pump Material CF-8M Stns. SteelPlunger Material 17 - 4 Stns. Steel, “Ultra” CoatedCylinder Material 304 Stnls. Stl. “Ultra” CoatedAir Motor 66523-BMotor Repair Kit 66614Motor Diameter 8” Stroke 6” Air Inlet 3/4” - 14 n.p.t.f.-1 (f)Lower Pump End Series 67200-X4GLower Pump Repair Kit 637317-X4CMaterial Inlet 2” NPT(M) / 1-1/2” NPT(F)Material Outlet 1” NPT(F)Weight 42.6 kgs.

Ordering6 5 0 8 3 9 - X 4 G - B


AccessoriesAir F/R/L: 28353Wall Mount: 66542Mounting Post: 67187-1Airline Oil: 62274Muffler: 92460Wet Sol: 66333-BNeedle Valve: 104104-N06AroStop: 635043

1184 m

652 mm

496 mm

650839-X4G-B

C O AT I N G ™

4-b

all P

um

ps

Low Volume / High Viscosity / Extrusion Packages

30

Package ContentsNP322L01-1 22:1 Ratio, Carbon Steel Extrusion PackageNM2322E-11-P43 Carbon Steel Pump129121-400 Air Filter/Regulator651840-1 Carbon Steel Follower Plate67075 Portable Lift

Basic Pump PerformanceAir Inlet Pressure Range 2 - 10.2 barsFluid Pressure Range 44.8 - 244.4 barsMaximum Working Flow: 3.7 l/minDisplacement Per Cycle 31.1 cm3

Lower Pump Material Carbon SteelPlunger Material 17 - 4 Stainless SteelAir Motor 66915Air Motor Repair Kit 637316Lower Pump End Series 67100-P43Lower Pump Repair Kit 637290-P43

Package ContentsNP322L02-1 22:1 Ratio, Stainless Steel Extrusion PackageNM2322F-11-P43 Stainless Steel Pump129121-400 Air Filter/Regulator651841-1 Stainless Steel Follower Plate67075 Portable Lift

Basic Pump PerformanceAir Inlet Pressure Range 2 - 10.2 barsFluid Pressure Range 44.8 - 244.4 barsMaximum Working Flow 3.7 l/minDisplacement Per Cycle 31.1 cm3

Lower Pump Material 15 - 5 Stainless SteelPlunger Material 17 - 4 Stainless SteelAir Motor 66915Air Motor Repair Kit 637316Lower Pump End Series 67101-P43Lower Pump Repair Kit 637291-P43

NP322L0X-1Portable Lift Only - Not a Ram

Ext

rusi

on P

um

ps

AccessoriesNeedle Valve: 104104-N02AroStop: 635040

31


Package ContentsNP322R01-1 22:1 Ratio, Carbon Steel Extrusion PackageNM2322E-11-P43 Carbon Steel PumpF25241-100 Air FilterR27241-600 Air Regulator651840-1 Carbon Steel Follower Plate651615-B Single Post Ram66713 Optional Portability Kit67189 Optional Hold Down Kit


Lower Pump Material Carbon SteelPlunger Material 17 - 4 Stainless SteelAir Motor 66915Air Motor Repair Kit 637316Lower Pump End Series 67100-P43Lower Pump Repair Kit 637290-P43

Package ContentsNP322R02-1 22:1 Ratio, Stainless Steel Extrusion PackageNM2322F-11-P43 Stainless Steel PumpF25241-100 Air FilterR27241-600 Air Regulator651841-1 Stainless Steel Follower Plate651615-B Single Post Ram66713 Optional Portability Kit


Lower Pump Material 15 - 5 Stainless SteelPlunger Material 17 - 4 Stainless SteelAir Motor 66915Air Motor Repair Kit 637316Lower Pump End Series 67101-P43Lower Pump Repair Kit 637291-P43

NP322R0X-1

Extru

sion P

um

ps



32

Package Contents650540-1 43:1 Ratio, Carbon Steel Extrusion Package67120-P43 Carbon Steel Pump651840-1 Carbon Steel Follower Plate67075 Portable Lift

Basic Pump PerformanceAir Inlet Pressure Range 2 - 10.2 barsFluid Pressure Range 87.7 - 438.7 barsFlow @ 75 Cycles/Minute: 3.4 l/minDisplacement Per Cycle 45.8 cm3

Lower Pump Material Carbon SteelPlunger Material 17-4 Stnls. Steel (Chrome Plated)Air Motor 65440Air Motor Repair Kit 61268Lower Pump End Series 67100-P43Lower Pump Repair Kit 637290-P43

Package Contents650541-1 43:1 Ratio, Stainless Steel Extrusion Package67121-P43 Stainless Steel Pump651841-1 Stainless Steel Follower Plate67075 Portable Lift


Lower Pump Material 15 - 5 Stainless SteelPlunger Material 17-4 Stnls. Steel (Chrome Plated)Air Motor 65440Air Motor Repair Kit 61268Lower Pump End Series 67101-P43Lower Pump Repair Kit 637291-P43

65054X-1Air Powered Lift ONLY - Not a Ram

Ext

rusi

on P

um

ps

AccessoriesNeedle Valve: 104104-N04AroStop: 23644-400

33


Package Contents650542-1 43:1 Ratio, Carbon Steel Extrusion Package(-2 Same except Follower is 651840-2)67120-P43 Carbon Steel Pump651840-1 Carbon Steel Follower Plate651615-B Single Post Ram66713 Optional Portability Kit


Lower Pump Material Carbon SteelPlunger Material 17 - 4 St. Steel (Chrome Plated)Air Motor 65440Air Motor Repair Kit 61268Lower Pump End Series 67100-P43Lower Pump Repair Kit 637290-P43

Package Contents650543-1 43:1 Ratio, Stainless Steel Extrusion Package67121-P43 Stainless Steel Pump651841-1 Stainless Steel Follower Plate651615-B Single Post Ram66713 Optional Portability Kit


Lower Pump Material 15 - 5 Stainless SteelPlunger Material 17 - 4 St. Steel (Chrome Plated)Air Motor 65440Air Motor Repair Kit 61268Lower Pump End Series 67101-P43Lower Pump Repair Kit 637291-P43

Package ContentsNP443R01-1* 43:1 Ratio, Carbon Steel Extrusion Package67124-P43 Carbon Steel Pump651613-C Two-Post Mini Ram651840-3 Follower PlateR27221-100 Regulator91790 Muffler


Lower Pump Material 15 - 5 Stainless SteelPlunger Material 17 - 4 St. Steel (Chrome Plated)Air Motor 65440Air Motor Repair Kit 61268Lower Pump End Series 67101-P43Lower Pump Repair Kit 637291-P43

65054X-1

Shown with optional67189 Stop & Bracket Assembly Kit

NP443R01-1

* This package can use 60 kg drums with a maximum height of 700mm

Extru

sion P

um

ps


High Volume / High Viscosity / Extrusion Packages

Extrusion SystemsPackages include Pump, 651616-X Ram, Follower Plate Assembly,65940 Filter/Regulator-Lubricator Kit, Air Motor Muffler & 90°Outlet Elbow.

To get the desired pump ration and follower options, replace the X with appropriatenumbers from the “Pump Information,” “Follower Options” and “Packing Options”Charts.

Ordering

NP4 XXR XX XXX

34

Packings Options:G43 UHMW-PE/Leather StaggeredR43 Teflon/UHMW-PE Staggered

(Upper) Teflon (Lower)

Follower Options:02 Aluminum Follower Plate with

Polyurethane Double-Lipped Seal52 Teflon Coated Aluminum Follower Plate

with Polyurethane Double-Lipped Seal

Pump Information:21 30:1 Stnls. Steel 2-Ball Pump

(650485-X43)22 22:1 Stnls. Steel 2-Ball Pump


(650483-X43)31 23:1 Carbon Steel Chop Check Pump

(650492-X43-B)34 12:1 Carbon Steel Chop Check Pump

(650491-X43-B)

Series:4-1/4” Air Motor

Popular Model Example:NP431R-02-G43

Ext

rusi

on P

um

ps


35

High Volume / High Viscosity / Extrusion Packages

Extrusion SystemsPackages include Pump, 651616-X Ram, Follower Plate Assembly,65940 Filter-Regulator-Lubricator Kit, 91790 Air Motor Muffler & 90° Outlet Elbow.

To get the desired pump ration and follower options, replace the X with appropriatenumbers from the “Pump Information,” “Follower Options” and “Packing Options”Charts.

Ordering

NP6 XXR XX XXX






Pump Information:21 60:1 Stnls. Steel 2-Ball Pump



(650683-X43)31 46:1 Carbon Steel Chop Check Pump

(650692-X43-B)34 23:1 Carbon Steel Chop Check Pump

(650691-X43-B)

Series:6” Air Motor

Popular Model Example:NP624R-02-G43

Extrusion SystemsPackages include Pump, 651616-X Ram, Follower Plate Assembly,651729 Filter/Regulator-Lubricator Kit, Air Motor Muffler & 90° Outlet Elbow.

Ordering

NP8 XXR XX XXX






Series:8” Air Motor

Pump Information:34 44:1 Carbon Steel Pump

(650891-X47-B)

Extru

sion P

um

ps



12:1 / 12,4 Lpm / Extrusion • Piston Pumps

Ordering6 5 0 4 9 1 - X 4 3 - B

Packings:G : UHMW-PE/Leather StaggeredP : UHMW-PE/Teflon Staggered

(Upper), UHMW-(Lower)R : Teflon/UHMW-PE Staggered

(Upper), Teflon (Lower)

AccessoriesAir F/R/L: C28241-810Airline Oil: 62274Air Motor Muffler: 91790Wet Sol: 66333-BFloor Mount: 65138Needle Valve: 104104-N04AroStop: 23644-400RAMS: Page 57

36


Cycles Per Litre 4.8Flow @ 60 Cycles / Minute 12.4 l/minNoise Level @ 4 bars 80 db(A) w/muffler

Pump SpecificationsLower Pump Material Carbon Steel (Nickel Plated)Plunger Material 17.4 Stnls. Steel (Hard Chrome Plated)Cylinder Material Carbon Steel (Nickel Plated)Air Motor 65465-BMotor Repair Kit 61268Motor Diameter 4-1/4”Stroke 6”Air Inlet 1/2” NPT(F)Exhaust Port 1-1/4” NPT(F)Chop Check Pump Model 66243-X43-BLower Pump Repair Kit 637071-X43-BMaterial Inlet Flange MountMaterial Outlet 1” NPT(F)Weight 29 kgs.

120 120250100 150 200500

0 10 20 30 40 50

300

100 100

80 80

60 60

40 40

20 20

0 0

CYCLES PER MINUTE

Performance based on 90 wt. gear oil at ambient temperature

8.3 bars

6.2 bars

4.1 bars

8.3 bars

6.2 bars

4.1 bars

Flui

d Pr

essu

re (B

ars)

Air C

onsu

mpt

ion

(litre

s/se

c.)

LITRES PER MINUTE DELIVERY

1311.9 mm

780.6 mm

450.4 mm

650491-X43-BExt

rusi

on P

um

ps

37



Cycles Per Litre 1.5Flow @ 60 Cycles / Minute 39.6 lpmNoise Level @ 4 bars 80 db(A) w/muffler

Pump SpecificationsLower Pump Material Carbon Steel (Nickel Plated)Plunger Material Carbon Steel (Chrome Plated)Cylinder Material Carbon Steel (Nickel Plated)Air Motor 66523Motor Repair Kit 66614Motor Diameter 8”Stroke 152 mmAir Inlet 3/4” NPT(F)Exhaust Port 1-1/4” NPT(F)Chop Check Pump Model 66236-XX4-BLower Pump Repair Kit 637128-XX4-BMaterial Inlet Flange MountMaterial Outlet 1-1/2” NPT(F)Weight 57 kgs.

Packings / Springs:F4 : UHMW-PE/Leather Staggered (Upper),

UHMW-PE (Lower), Multiple Wave SpringJ3 : Polyurethane (Upper), UHMW-PE (Lower), No SpringP4 : UHMW-PE/Teflon Staggered (Upper), UHMW-PE

(Lower), Multiple Wave SpringR4 : Teflon/UHMW-PE Staggered (Upper), Teflon (Lower)

Multiple Wave Spring

650871-XX4-B

AccessoriesAir F/R/L: 28353Airline Oil: 62274Air Motor Muffler: 92460Wet Sol: 66333-BFloor Mount: 65139Needle Valve: 104104-N06AroStop: 635043RAM: Page 57

120 1206040200

0 10 20 30 40 50

80

100 100

80 80

60 60

40 40

20 20

0 0

CYCLES PER MINUTE

Performance based on 90 wt. gear oil at ambient temperature8.3 bars

6.2 bars

4.1 bars

8.3 bars

6.2 bars

4.1 bars

Flui

d Pr

essu

re (B

ars)

Air C

onsu

mpt

ion

(litre

s/se

c.)


1329.5 mm

508 mm

797.7 mm

6 5 0 8 7 1 - X X 4 - BOrdering

Extru

sion P

um

ps


Pump PerformanceAir Inlet Pressure Range 6.1 bars Fluid Pressure Range 122.4 bars Max. Rec’d Cycles Per Minute 60Displacement Per Cycle 662 cm3


Pump SpecificationsLower Pump Material Carbon Steel (Nickel Plated)Plunger Material Carbon Steel (Chrome Plated)Cylinder Material Carbon Steel (Nickel Plated)Air Motor 66651Motor Repair Kit 637110Motor Diameter 10”Stroke 6”Air Inlet 3/4” NPT(F)Exhaust Port 1-1/4” NPT(F)Chop Check Pump Model 66236-XX4-BLower Pump Repair Kit 637128-XX4-BMaterial Inlet Bolted FlangeMaterial Outlet 1-1/2” NPT(F)Weight 65.4 kgs.

Ordering6 5 0 8 7 5 - X X 4 - B

Packings / Springs:F4 : UHMW-PE/Leather Staggered (Upper), UHMW-PE

(Lower), Multiple Wave SpringJ3 : Polyurethane (Upper), UHMW-PE (Lower),

No SpringP4 : UHMW-PE/Teflon Staggered (Upper), UHMW-PE

(Lower), Multiple Wave SpringR4 : Teflon/UHMW-PE Staggered (Upper), Teflon (Lower)

Multiple Wave Spring

AccessoriesAir F/R/L: 28353Airline Oil: 62274Air Motor Muffler: 66718Wet Sol: 66333-BFloor Mount: 65139Needle Valve: 104104-N06AroStop: 635043RAMS: Page 57

38

180

160

1801008040 60200

0 10 20 4030 6050 70

120

140

160

140

120 120

100

80

40

100

80

6060

40

20 20

0 0

CYCLES PER MINUTE


6.2 bars

4.1 bars

6.2 bars

4.1 bars

Flui

d Pr

essu

re (B

ars)

Air C

onsu

mpt

ion

(litre

s/se

c.)


1301.7 mm

508 mm

797.7 mm

650875-XX4-B

Ext

rusi

on P

um

ps



Cycles Per Litre 32.1Maximum Working Flow 0.3.7 l/minNoise Level @ 6.8 bars 85 db(A)

Pump SpecificationsLower Pump Material 316 Stnls. SteelPlunger Material 17-4 Stnls. Steel (Chrome Plated)Cylinder Material 15-5 Stnls. Steel (Chrome Plated)Air Motor 66915Motor Repair Kit 637316Motor Diameter 3”Stroke 3”Air Inlet 1/4” NPTF-1 (F)Lower Pump Model NM2322F-11-P43 67101-P43

NM2322F-11-P43 67101-P48Lower Pump Repair Kits NM2322F-11-P43 637291-P43

NM2322F-11-P48 637291-P48Material Inlet Follower Plate MountedMaterial Outlet 1/2” NPT(F)Weight 13 kgs.

AccessoriesAir F/R/L: 128121-800Airline Oil: 62274Wet Sol: 66333-BFollower Plate: 651841-1A.S.A.P. Packages: NP322R02-1

NP322L02-1Needle Valve: 104104-N02AroStop: 365040

621 mm

430 mm

360 mm

857 mm

39

N M 2 3 2 2 X - 1 1 - P 4 X

Plunger:3 : Hardened/SS

with hard chrome plating8 : Hardened/SS

with alternate piston

NM2322F-11-P4X160 14

150100500

0 1 32 4 65

200

140 12

12010

1008

80

660

40

20

4

2

0 0

CYCLES PER MINUTE


8.3 bars

6.2 bars

4.1 bars

8.3 bars

6.2 bars

4.1 bars

Flui

d Pr

essu

re (B

ars)

Air C

onsu

mpt

ion

(litre

s/se

c.)


Ordering

Extru

sion P

um

ps

Pump Material:E : Carbon SteelF : Stainless Steel

Packing Material:P : UHMW-PE

Glass Filed Teflon Staggered (Upper)UHMW-PE (Lower) String Arrangment:

4 : Multiple Wave Spring



Cycles Per Litre 8.8Flow @ 60 Cycles / Minute 6.8 l/minNoise Level @ 4 bars 80 db(A)

Pump SpecificationsLower Pump Material Carbon Steel (Nickel Plated)Plunger Material 17.4 Stainless (Hard Chrome Plated)Cylinder Material Carbon Steel (Nickel Plated)Air Motor 65465-BMotor Repair Kit 61268Motor Diameter 4-1/4”Stroke 6”Air Inlet 1/2” NPT(F)Exhaust Port 1-1/4” NPT(F)Chop Check Pump Model 66266-X43-BLower Pump Repair Kit 637074-X43-BMaterial Inlet Bolted FlangeMaterial Outlet 1” NPT(F)Weight 28.9 kgs.


250 90200150100500

0 5 10 15 20 25 30

250

200

80

15060

70

100

50

40

30

50 20

10

0 0

CYCLES PER MINUTE


8.3 bars

6.2 bars

4.1 bars

8.3 bars

6.2 bars

4.1 bars

Flui

d Pr

essu

re (B

ars)

Air C

onsu

mpt

ion

(litre

s/se

c.)


1310.6 mm

779.8 mm

449.6 mm

Ordering6 5 0 4 9 2 - X 4 3 - B

Packings:G : UHMW-PE/Leather StaggeredP : UHMW-PE/Teflon Staggered (Upper),


Teflon (Lower)

650492-X43-B

40

Ext

rusi

on P

um

ps




Pump SpecificationsLower Pump Material Carbon Steel (Nickel Plated)Plunger Material 17.4 Stnls. Steel (Hard Chrome Plated)Cylinder Material Carbon Steel (Nickel Plated)Air Motor 65665-BMotor Repair Kit 61355Motor Diameter 6”Stroke 6”Air Inlet 1/2” NPT(F)Exhaust Port 1-1/4” NPT(F)Chop Check Pump Model 66243-X43-BLower Pump Repair Kit 637071-X43-BMaterial Inlet Bolted FlangeMaterial Outlet 1” NPT(F)Weight 30.4 kgs.

Ordering6 5 0 6 9 1 - X 4 3 - B



Teflon (Lower)


400 120100500

0 5 10 15

150

350

300

100

25080

200 60

15040

100

5020

0 0

CYCLES PER MINUTE


6.2 bars

4.1 bars

8.3 bars

6.2 bars

4.1 bars

Flui

d Pr

essu

re (B

ars)

Air C

onsu

mpt

ion

(litre

s/se

c.)


1310.6 mm

779.8 mm

449.6 mm

650691-X43-B

41

Extru

sion P

um

ps


Pump PerformanceAir Inlet Pressure Range 2 - 8.3 barsFluid Pressure Range 57.1 - 228.5 barsMax. Rec’d Cycles Per Minute 70Displacement Per Cycle 20Volume/Cycle 327.6 mlFlow @ 70 Cycles / Minute 22.94 lpmNoise Level @ 4 bars 89.8 db(A)

Pump SpecificationsLower Pump Material: Carbon SteelPlunger Material: Hard Chrome Plated (Hardened Stainless Steel)Cylinder Material: Carbon SteelAir Motor: 66523-BMotor Repair Kit: 66614Motor Diameter: 8”Stroke: 6”Air Inlet: 3/4-14 NPTF-1Lower Pump Model: 67300-XXDLower Pump Repair Kit: 637348-XXDMaterial Inlet: Follower Plate and Floor MountedMaterial Outlet: 1-1/4-11-1/2 NPTFWeight: 63.5 Kgs.


Air F/R/L: 28353Airline Oil: 62274Air Motor Muffler: 92460Wet Sol: 66333-BFloor Mount: 65139Needle Valve: 104104-N06AroStop: 635043RAMS: Page 57

42

6 5 0 8 8 8 - X X DOrdering

Packings / Springs:C4 : UHMW-PE (Upper, Lower), V-typeJ3 : PolyPak (Polymyte)

650888-XXD

Ext

rusi

on P

um

ps

6 5 0 9 7 1 - X X 4 - B

43


Pump PerformanceAir Inlet Pressure Range 6.1 barsFluid Pressure Range 183.6 bars Max. Rec’d Cycles Per Minute 60Displacement Per Cycle 662 cm3


Pump SpecificationsLower Pump Material Carbon SteelPlunger Material Carbon SteelCylinder Material Carbon Steel (Nickel Plated)Air Motor 66506Motor Repair Kit 637112Motor Diameter 12”Stroke 6”Air Inlet 3/4” NPT(F)Exhaust Port 1-1/4” NPT(F)Chop Check Pump Model 66236-XX4-BLower Pump Repair Kit 637128-XX4-BMaterial Inlet Bolted FlangeMaterial Outlet 1-1/2” NPT(F)Weight 66.8 kgs.

Ordering

Packings / Springs:F4 : UHMW-PE/Leather Staggered (Upper),

UHMW-PE (Lower), Multiple Wave SpringJ3 : Polyurethane (Upper), UHMW-PE (Lower),

No SpringP4 : UHMW-PE/Teflon Staggered (Upper),

UHMW-PE (Lower), Multiple Wave SpringR4 : Teflon/UHMW-PE Staggered (Upper),

Teflon (Lower)Multiple Wave Spring


250

120

1406020100

0 10 20 30 40

4030 50

100

80

200

60

150

40

100

5020

0 0

CYCLES PER MINUTE


6.2 bars

4.1 bars

6.2 bars

4.1 bars

Flui

d Pr

essu

re (B

ars)

Air C

onsu

mpt

ion

(litre

s/se

c.)


1301.7 mm

797,7 mm

508 mm

650971-XX4-B

Extru

sion P

um

ps

43:1 / 3,4 Lpm / Extrusion / Carbon Steel / Piston Pumps

AccessoriesAir F/R/L: C28241-810Airline Oil: 62274Air Motor Muffler: 91790Wet Sol: 66333-BFollower Plate: Pages 59 à 61A.S.A.P. Packages: 650540-1

650542-1Needle Valve: 104104-N04AroStop: 23644-400

44

Pump PerformanceAir Inlet Pressure Range 0 - 10.3 barsFluid Pressure Range 0 - 451.7 barsMax. Rec’d Cycles Per Minute 60Displacement Per Cycle 46.7 cm3

Cycles Per Liter 21.7Flow @ 60 Cycles / Minute 2.8 l/minNoise Level @ 4 bars 80 db(A)

Pump SpecificationsLower Pump Material Carbon Steel Plunger Material 17-4 Stainless SteelCylinder Material Carbon SteelAir Motor 65440Motor Repair Kit 61268Motor Diameter 4-1/4”Stroke 4”Air Inlet 1/2” -14 NPTF-1(F)Exhaust Port 1-1/4” NPT(F)Dimension 67120-P43 1006.6 mm

67124-P43 1232.7 mmLower Pump Model 67120-P43 67100-P43

67124-P43 67100-P43Lower Pump Repair Kits 63729X-P4XMaterial Outlet 1/2”-14 NPTF-1 (Female)Weight 20 kgs.

350 90150100500

0 1 32 4 5 6

200

30080

25060

70

200 50

40150

30

20100

50 10

0 0

CYCLES PER MINUTE


6.2 bars

4.1 bars

8.3 bars

6.2 bars

4.1 bars

Flui

d Pr

essu

re (B

ars)

Air C

onsu

mpt

ion

(litre

s/se

c.)


429 mm

619.7 mm

1005.8 mm

67120-P4X

Ext

rusi

on P

um

ps

Ordering6 7 1 2 X - P 4 X

Packings:P : UHMW-PE/Glasss Filled

Teflon Staggered (Upper)UHMW-PE (Lower)

Plungers3 : Hardened Stainless

Steel with Chrome Plated

8 : Hardened Stainless Steel with Alternate Pist

Pump Material:0 : Acier Carbon4 : Acier Carbon

43:1 / 3,4 Lpm / Extrusion / Stainless Steel / Piston Pumps

Pump PerformanceAir Inlet Pressure Range 0 - 10.3 barsFluid Pressure Range 0 – 451.7 barsMax. Rec’d Cycles Per Minute 60Displacement Per Cycle 46.7 cm3

Cycles Per Liter 21.7Flow @ 60 Cycles / Minute 2.8 l/minNoise Level @ 4 bars 80 db(A)

Pump SpecificationsLower Pump Material Stainless SteelPlunger Material 3 Hardened Stainless Steel with

Chrome PlatedCylinder Material 8 Hardened Stainless Steel with

Alternate PistonAir Motor 65440Motor Repair Kit 61268Motor Diameter 4-1/4”Stroke 4”Air Inlet 1/2” NPT(F)Exhaust Port 1-1/4” NPT(F)Dimensions 67121-P43 1006.6 mm

67125-P43 1237.7 mmLower Pump Model 67121-P43 67101-P43

67125-P43 67101-P43Lower Pump Repair Kits 63729X-P4XMaterial Outlet 1/2” - 14 NPTF-1 (Female)Weight 220 kgs.

AccessoriesAir F/R/L: C28241-810Airline Oil: 62274Air Motor Muffler: 91790Wet Sol: 66333-BFollower Plate: 651841-1A.S.A.P. Packages: 650541-1

650543-1Needle Valve: 104104-N04AroStop: 23644-400

1005.8 mm

619.7 mm

429 mm

45

350 90150100500

0 1 32 4 5 6

200

30080

25060

70

200 50

40150

30

20100

50 10

0 0

CYCLES PER MINUTE


6.2 bars

4.1 bars

8.3 bars

6.2 bars

4.1 bars

Flui

d Pr

essu

re (B

ars)

Air C

onsu

mpt

ion

(litre

s/se

c.)


67121-P4X

Extru

sion P

um

ps

Ordering6 7 1 2 X - P 4 X

Packings:P : UHMW-PE/Glasss Filled

Teflon Staggered (Upper)UHMW-PE (Lower)

Plungers3 : Hardened Stainless

Steel with Chrome Plated

8 : Hardened Stainless Steel with Alternate Pist

Pump Material:1 : Stainless Steel 5 : Stainless Steel

Ordering6 5 0 8 9 1 - X 4 7 - B



Teflon (Lower)


Pump PerformanceAir Inlet Pressure Range 8.1 barsFluid Pressure Range 359.1 barsMax. Rec’d Cycles Per Minute 60Displacement Per Cycle 237.6 cm3


Pump SpecificationsLower Pump Material Carbon SteelPlunger Material Carbon SteelCylinder Material 17-4 Stnls. Steel (Chrome Plated)Air Motor 66523Motor Repair Kit 66614Motor Diameter 8”Stroke 6”Air Inlet 3/4” NPT(F)Exhaust Port 1-14” NPT(F)Chop Check Pump Model 66243-X47-BLower Pump Repair Kit 637071-X47-BMaterial Inlet Bolted FlangeMaterial Outlet 1” NPT(F)Weight 40.4 kgs.


46

1328.4 mm

449.5 mm

698.5 mm

400 1206020 400

0 5 10 15

80

350100

300

80250

200 60

15040

100

5020

0 0

CYCLES PER MINUTE


6.2 bars

4.1 bars

8.3 bars

6.2 bars

4.1 bars

Flui

d Pr

essu

re (B

ars)

Air C

onsu

mpt

ion

(litre

s/se

c.)


650891-X47-B

Ext

rusi

on P

um

ps

47



Air F/R/L: 28353Airline Oil: 62274Air Motor Muffler: 66718Wet Sol: 66333-BFloor Mount: 65139Needle Valve: 104104-N06AroStop: 635043RAMS: 651612-4

Pump PerformanceAir Inlet Pressure Range 2.1 - 6.2 barsFluid Pressure Range 89.7 - 269.4 barsMax. Rec’d Cycles Per Minute 70Displacement Per Cycle 20Volume Per Cycle 327.6 mlFlow @ 70 Cycles / Minute 22.94 lpmNoise Level @ 4 bars 89.8 db(A)

Pump SpecificationsLower Pump Material Carbon SteelPlunger Material Hard Chrome Plated (Hardened Stainless Steel)Cylinder Material Carbon SteelAir Motor 66651-BMotor Repair Kit 637110Motor Diameter 10”Stroke 6”Air Inlet 3/4-14 NPTF-1Lower Pump Model 67300-XXDLower Pump Repair Kit 637348-XXDMaterial Inlet Follower Plate and Floor MountedMaterial Outlet 1-1/4-11-1/2 NPTFWeight 74.8 Kgs.



UHMW-PE (Lower), V-type

650889-XXX

Extru

sion P

um

ps



48



Pump SpecificationsLower Pump Material Carbon SteelPlunger Material 17.4 Stnls. Steel (Chrome Plated)Cylinder Material Carbon Steel (Nickel Plated)Air Motor 65665-BMotor Repair Kit 61355Motor Diameter 6”Stroke 6”Air Inlet 1/2” NPT(F)Exhaust Port 1-1/4” NPT(F)Chop Check Pump Model 66266-X43-BLower Pump Repair Kit 637074-X43-BMaterial Inlet Bolted FlangeMaterial Outlet 1” NPT(F)Weight 30.4 kgs.

779.8 mm

449.6 mm

1310.6 mm

400 120100500

0 5 10 15

150

350

300

100

25080

200 60

15040

100

5020

0 0

CYCLES PER MINUTE


6.2 bars

4.1 bars

8.3 bars

6.2 bars

4.1 bars

Flui

d Pr

essu

re (B

ars)

Air C

onsu

mpt

ion

(litre

s/se

c.)


Ordering6 5 0 6 9 2 - X 4 3 - B



Teflon (Lower)

650692-X43-BExt

rusi

on P

um

ps



Air F/R/L: 28353Airline Oil: 62274Air Motor Muffler: 66718Wet Sol: 66333-BFloor Mount: 65139Needle Valve: 104104-N06AroStop: 635043RAMS: Pages 57

49

Pump PerformanceAir Inlet Pressure Range 2.1 - 6.2 barsFluid Pressure Range 134.5 - 403.4 barsMax. Rec’d Cycles Per Minute 70Volume/Cycle 327.6 mlFlow @ 70 Cycles / Minute 22.94 lpmNoise Level @ 4 bars 89.8 db(A)

Pump SpecificationsLower Pump Material Carbon SteelPlunger Material Hard Chrome Plated (Hardened Stainless Steel)Cylinder Material Carbon SteelAir Moto 66506-BMotor Repair Kit 637112Motor Diameter 12”Stroke 6”Air Inlet 3/4-14 NPTF-1Lower Pump Model 67300-XXDLower Pump Repair Kit 637348-XXDMaterial Inlet Follower Plate and Floor MountedMaterial Outlet 1-1/4-11-1/2 NPTFWeight 74.8 Kgs.



UHMW-PE (Lower), V-type

650989-XXX

Extru

sion P

um

ps

Accessories • Piston Pumps

50

Typical Recirculating System InstallationIn a typical recirculating system, an agitator (1) keeps particles in suspension in the material container. A siphon hose (2)draws the material from its container and into the recirculating block (3) and then into the pump (4). When the materialleaves the outlet it enters the material filter (5) to screen out any impurities to prevent system clogging or tip plugging. Thematerial then enters a material heater (6) to bring the material to a workable temperature before it reaches the dispensingpoint. The material travels through material hose (7) on its way to the dispensing point. One may use a standard airless spraygun (8) with a recirculating block (9) to return the fluid to the inlet port of the pump. A spray tip (10) matched to the viscosityof the paint, the pattern to be sprayed, and the finish required, must be chosen. The material not dispensed goes throughthe recirculating block and travels through a material hose (7) back to the pump inlet to start the cycle again. A back pressureregulator (11) is placed in this line to maintain the desired pressure at the spray gun. A three-way valve (12) is locatedbetween the regulator and the pump inlet to allow evacuation of air from the system or flushing of material from the systemduring clean-up operation. A length of hose (13) is recommended for flushing operation to route material to its properdestination.

3

1

2

4

5

6

7

8

9

10

11

12

13

1 651100 Air-operated agitator (20 liters)1 651851 or Drum cover (20 liters)1 651852 Drum cover (includes airoperated agitator) (200 liters).1 65986-1 or 3/4” siphon hose 2 m (20 liters)1 67140-X 3/4” siphon hose 2 m (200 liters)1 91600 Recirculating inlet block1 650485-X4X or 4-1/4” 30:1 pump1 650640-X4B 6” 3:1 pump1 651755-100-B Material outlet filter1 651747-X-B Material heater2 628042-025 1/4” airless spray hose 7,50 m length1 651533 Airless spray hand gun1 79244 Double inlet adapter (recirculating block)1 TCXXXX Airless spray tip1 651781-XXX-B or I.D.L. High Pressure backpressure regulator1 651791-XXX-B I.D.L. Low Pressure backpressure regulator1 66117 Three-way valve 1 Not Offered 3/16” I.D. hose (60 mm)

Other Items:1 66101 Wall mount bracket1 C28241-810 1/2” filter/ regulator/lubricator1 628042-XX 1/4” material hose (connects filter to heater)2 445-105 1/2 NPT(M) x 1/4 NPT(M) reducing bushing5 1950 1/4” adapters1 65030-5 In line swivel filter1 104104-XXX Needle Valve1 236-40 AroStop

I.D. Qty. Model Number Description

Acc

esso

ries

51


Bulk/ Tote Tank Components

66554-1

D

C

B

A

Model Description Used with66189 PORTABLE CART - Will clear 711mm 3-1/4”, 4-1/4”,& 6” 2-Ball air

openings. Has 305mm tires. motor tie rod construction pumps.66189-1 PORTABLE CART - Will clear 711mm 3”, 3-1/4”, & 4-1/4” 4” air motor

openings. Has 305mm tires. single riser pumps.66554-1 PORTABLE CART - 610mm to 3-1/4”, 4-1/4” & 6” air motor,

762mm wheel spacing adjustment. 2-ball and 4-ball pumps.Has 406mm tires.

66554-2 PORTABLE CART - 610mm to 8”, 10” & 12” air motor pumps762mm wheel spacing adjustment. 8” Integrity.Has 406mm tires.

66713 PORTABILITY KIT - Mounts directly to 651605, 650605-1 Single Post the base of the 651605 SINGLE POST RAM, Ram and Rams packages.to allow ease of portability. Will clear711mm openings. Has 305mm tires.

67074 PORTABLE CART - Will clear 610mm 66100, 66101, 61113 & 67054 openings. Has 250 mm tires. Pump Mounts and correspon

ding pumps. See page 23.67139 PORTABLE CART - Will clear 711mm Integrity Pumps 3-1/4”, 4-1/4”, 6”

openings. Unique “chair” design distributes pump weight and makes moving easy. 305mm pneumatic tires also enhance smooth transport.

Model Description

A 628088-7 MATERIAL SUPPLY HOSE - Heavy-duty 1” diameter hose features neoprene construction with a 345 bars max. working pressure capacity. Both ends 1” NPT(M). Length: 2,15m.

B 67073 BALL VALVE - For use with 628088-7 material supply hose. 310 bars max working. Pressure rated.

C 628089-X MATERIAL HOSE WITH FITTINGS - 3” diameter hose has cross-linked polyethylene (internal) and neoprene (external) construction. Hose comes with female cam-lever locking coupler, male adapter, cam-levellocking dust cap and dust plug. Length: 60mm. (628089-2), 182mm. (628089-6). Max. working pressure: 8,6 bars

D 65138 PUMP FLOOR MOUNT - See page 54 for floor mount information.65139

Portable Pump Carts

Pump Lifts

Model Description Used with Drums Covers Follower plateUsed with Used with

640067 SINGLE-POST LIFT - Single-acting air All 200 liters 651852 –cylinder for easy drum change-over. bung-type or 66197Requires drum cover. 2.3m pumps Drum Coverextended.

640169 TWO-POST LIFT- Two 51mm 3-1/4”, 4-1/4” 61729 Drum 200 litersdiameter air cylinders connected by and 6” air mtr. COVER (not 66248 ,steel mounting bracket. Air connector 2-ball re- 4-ball, needed if 66248-1 orwith strictor orifice controls ascent and extrusion using a 66469and descent. 1,016mm x 610mm 200 liters follower plate)base. 2.3m extended. # Base must pumps be ordered separately.

65116 HOSE KIT- Used when extrusion pumps – – –and 66248 follower plate are mounted on640169 air lift. Directs air pressure underfollower plate to assist airlift in removingpump from drum during changeovers.

Accesso

ries

640067

67139


52

65139

Model Description Container Pumps Used withliters

651851 DRUM COVER - Accepts 65986 20 2”, 3”, and 3-1/4” air mtr.wall-SIPHON HOSE and 651100 AGITATOR mounted stub pumps that use65986 SIPHON HOSE.

66971 DRUM COVER - Stainless steel, accepts 20 1/2” ports diaphragm pump651100 agitator

66197 DRUM COVER - Includes hinged access 200 2”, 3”, 3-1/4” and 4-1/4”covers, 2” NPT(F) bung opening, and will 200 liters size bung type pumps.accept 651104-1 AGITATOR.

651852 DRUM COVER - Includes hinged access 200 Accepts 65986-1 Siphon hose cover, 2” NPT(F) bung opening, from any wall mounted pump. 51mm x 864 mm pipe extension and 60307 Any 200 liters bung-type pump AGITATOR that can be used with 640067 Lift.

61729 DRUM COVER - Includes hinged access 200 3-1/4”, 4-1/4” and 6” air mtr. cover and carrying handles. 2-ball, 4-ball.or extrusion pumps.Also used with 640169 2-POST LIFT

651853 DRUM COVER - Stainless Steel with 651104-1 200 Accepts 67140-2 Siphon hose &agitator, suction tube with 90o elbow, 1” return tube from wall-mounted pump.port, and hinged access door

Drum Covers

Model Description Pumps Used with65138 FLOOR MOUNT - Accepts suction line from bulk 3-1/4” 4-1/4” & 6”air mtr. 2-

containers or mixing tanks. 3” NPT(F) inlet. ball and extrusion pumps. 1/4” NPT(F) vent port with plug. Also 8” 38:1 2-ball and 44:1

extrusion pumps (Type A).65139 FLOOR MOUNT - Accepts suction line from bulk 8”, 10” and 12” air mtr. 2-ball &

containers or mixing tanks. 3” NPT(F) inlet. extrusion pumps. Except 8” 1/4” NPT(F) vent port with plug. 38:1 2-ball and 44:1 extrusion

pumps (Type B)62042 PUMP FLOOR DOLLY - Permits pump to be easily moved Must be used with 65138 or

around work site.Heavy gauge metal construction. 35139 floor mounts.66545 INLET ADAPTER- permits 4-ball pumps to be used 4-Ball Pumps

with 66101 Wall Mount, 66554-1 Cart, or 640169Lift. Cast iron adapter has a 2” NPT(F) fluid inlet.

66585 INLET ADAPTER- same as 66545, except 4-Ball Pumpsfeatures stainless steel construction.

66547 PEDESTAL MOUNT- permits 4-ball pumps to be 4-Ball Pumpsfloor mounted. Flash chrome-plated Meehanitemount has (2) 1-1/2” NPT(F) fluid inlets.

67187-1 Mounting Post - Floor stand mounting post 4-1/4”, 6”Air Motorwith 4-1/4”, 6”& 8”air motors. Stinger Pumps

67187-2 Mounting Post - Floor stand mounting post 2 sq.inwith hydraulic motors. Hydraulic Motors

94254 INLET ADAPTER- 90o 1” NPT(M) X 3/4(F) used Integrity Pumpsto adapt suction hose to 67139 cart.

94256 OUTLET ADAPTER- for mounting material filter Integrity Pumps1” NPT(M) X 1/2” NPT (M).

Floor Mounts/ Adapters

Model Description Pumps Used with61113 WALL MOUNT BRACKET - Has 2” NPT(F) 1”, 2”, 3”, 3-1/4” and 4-1/4” air mtr. stub

opening to accept bung type pumps. pumps fitted with bung adapters or Bracket slips over rim of open head drum 200 liters bung type pumps.or can be wall-mounted.

66100 WALL MOUNT BRACKET - With 91395 3” and 3-1/4” and 4-1/4” air mtr.REMOVABLE MOUNTING plate. 4” stroke pumps.

66101 WALL MOUNT BRACKET - With 91396 3-1/4”, 4-1/4”, and 6” air mtr.REMOVABLE MOUNTING plate. 2- and 4-ball pumps.

66542 WALL MOUNT BRACKET - With 92371 8”, 10” & 12” pumpsREMOVABLE MOUNTING plate.

Wall Mounts

Acc

esso

ries

66100

66101

53


651103

651104-1

651100

651104-3

Model Container liters Mounting (Order Separately)651100* 20 651851 Drum Cover651104-3 20 Drum Cover65782 200 66686 Drum Cover651103 200 Drum Side651104-1 200 66197 Drum Cover650251 Bulk Tank* Includes air valve, fittings and tubing for quick installation.

Agitators

Agitator Air H.P. Air Mount. Diam. Length Standard Material Extra Cost OptionModel Motor Motor (mm) (mm) Model Model Material

Model RPM

651100 650252 1/3 500-1000 Hub 12.7 305 31652-1 416 SS – –651104-3 650250 3/4 300-3000 Flange 12.7 267 92094-3 316 SS – –65782 650250 3/4 300-3000 Flange 12.7 813 73120 CS 92094-1 316 SST651103 650250 3/4 300-3000 Flange 12.7 813 92094-1 316 SS – –651104-1 650250 3/4 300-3000 Flange 12.7 813 92094-1 316 SS – –

Motor/Shaft spécifications

Agitator Number Diam. Prop Material Prop Extra Cost OptionModel of (mm) Standard Direction Model Material Prop

Props Model Direction

651100 1 102 31680-102 316 SS CCW 31680-112 Bronze CCW651104-3 1 127 31680-103 316 SS CCW – – –65782 2 127 31680-103 316 SS CCW 31680-113 Bronze CCW651103 2 127 31680-103 316 SS651104-1 2 127 31680-103 316 SSCW = ClockwiseCCW = Counter Clockwise

Propeller spécifications

Accesso

ries


54

67140-1

65986

6656865109

Siphon Hoses

Model Description Used with Hose Fluid FluidLength Outlet Inlet

mm NPT NPT65986 SIPHON HOSE - 20 liters size. 651851 Drum Cover 1.8 3/4(M) –

Neoprene cover and thiokol tube. or 20 liters container. Includes 91020-1 PIPE EXTENSION.

65986-1 SIPHON HOSE - 200 liters size. 651852 or 65963 Drum 1.8 3/4(M) –Neoprene cover and thiokol tube. COVER or closed drum 91020-2 PIPE EXTENSION. with 2” bung opening.

622702-6 SIPHON HOSE - 25.4 mm I.D. Stainless Steel 1.8 1(M) 1(M)hose with stainless steel fittings. Stub Pumps

622702-10 SIPHON HOSE - 25.4 mm I.D. Stainless Steel 3 1(M) 1(M)hose with stainless steel fittings. Stub Pumps

622701-6 SIPHON HOSE - 25.4 mm I.D. Carbon Steel 1.8 1(M) 1(M)hose with carbon steel fittings. Stub Pumps

Inlet Asseccories

Model Description91020-1 PIPE EXTENSION - 1/2” I.D. galvanized suction tube for 20 liters containers.91020-2 PIPE EXTENSION - 1/2” I.D. galvanized suction tube for 200 liters containers.651830 SCREEN ASSEMBLY - Adapts to 91020-1 or -2 PIPE EXTENSION. Keeps foreign matter

from entering lower pump end.66480 FILTER AND CHECK VALVE ASSEMBLY - 316 stainless steel assembly has 1” NPT (F)

connections and 40 mesh screen. 121 mm long x 54 mm in diameter. Used with suction tubes when fluid is corrosive and viscosity requires a foot valve forpositive priming.

66717 PIPE EXTENSION - Constructed of P.V.C. for Series 200, 300, 325 and 425 Stainless Steel Stub Pumps. Adapts pump to 200 liters capacity.

67140-1 STAINLESS STEEL SIPHON TUBE - For 20 liters containers, used with Integrity Pumps. Includes 406 mm wand and 127 mm of 3/4” hose.

Model Description Used with FluidOutlet

Inches NPT65109 SIPHON TUBE ASSEMBLY - 200 liters size Wall-mounted Stub Pumps when 3/4 (F)

carbon steel, with 2” bung adaptor. Hose not fluid viscosity requires a foot valve orincluded. Suggest 622681-06 Hose for 3/4” for priming or with drum cover that 1 (F)inlet or 66701-06 Hose for 1” inlet. has a 2” NPT (F) bung opening.

66568 SIPHON TUBE WITH FILTER AND CHECK Wall-mounted Stub Pumps when 1 (F)VALVE ASSEMBLY - 316 stainless steel with fluid is corrosive and viscosity 2” NPT bung adapter, AND 66480 FILTER requires a foot valve for positive AND CHECK VALVE assembly. Hose not priming.included. Suggest 622702-06 Hose.

Siphon Tubes

Acc

esso

ries

66480

9425694254

55


RAMSFor use with materials over 200,000 CPS viscosity. Consists of two 3-1/2”diameter air cylinders joined by cross-over tubes and welded to a steelbase. Cast aluminum follower plate has double edge Buna N wiper to cleandrum and seal material from atmosphere.

Base 991 mm x 610 mmRaised height 2.5 mLowered position height 1.6 m

Mounting footprint is strictly a reference letter used to simplify the matching ofpumps to follower plates and related accessories. (i.e. pump with “A” mountingfootprint will fit any accessory with “A” mounting footprint.

651616-X

Pump / Drum Stabilizing Brackets

66354-1

67133

Model Follower Plate Style Container Mounting Coating Wiper Type Wiper MaterialLiters Footprint

651616-1 66516 Flat 200 A None Double Lip Nitrile651616-2 66516-1 Flat 200 A None Double Lip Polyurethane651616-3 66516-2 Flat 200 A None Double Lip EPR651616-4 66517 Flat 200 B None Double Lip Nitrile651616-5 66517-1 Flat 200 B None Double Lip Polyurethane651616-6 66517-2 Flat 200 B None Double Lip EPR651616-13 67195-2 Tapered 200 A None Tube Type EPR651616-14 67195-1 Tapered 200 A None Tube Type Nitrile651616-15 67195-3 Tapered 200 A None Tube Type Viton651616-16 67196-2 Tapered 200 B None Tube Type EPR651616-17 67196-1 Tapered 200 B None Tube Type Nitrile651616-18 67196-3 Tapered 200 B None Tube Type Viton651616-52 66516-6 Flat 200 A Teflon Double Lip Polyurethane651616-53 66516-7 Flat 200 A Teflon Double Lip EPR651616-54 66517-5 Flat 200 B Teflon Double Lip Nitrile651616-55 66517-6 Flat 200 B Teflon Double Lip Polyurethane651616-56 66517-7 Flat 200 B Teflon Double Lip EPR651616-57 67195-6 Tapered 200 A Teflon Tube Type EPR651616-58 67195-5 Tapered 200 A Teflon Tube Type Nitrile651616-59 67195-7 Tapered 200 A Teflon Tube Type Viton651616-60 67196-6 Tapered 200 B Teflon Tube Type EPR651616-61 67196-5 Tapered 200 B Teflon Tube Type Nitrile651616-62 67196-7 Tapered 200 B Teflon Tube Type Viton

Model Description Used With Follower PlateUsed With

66353-1 Pump Stabilizing Brackets - Attaches 8”, 10”, 12” _easily to 651616 Ram. Kit includes Air Motor Pumpshardware.

66354-1 Pump Stabilizing Brackets - Same as 41⁄4” & 6” _66353-1 except fits smaller pumps. Air Motor Pumps

67133 Drum Hold-Down Brackets - _ _Kit includes 2 brackets, clamp screws, nuts. Used with 651616-XX.

Accesso

ries


56

651614-1(Pump sold separate)

651614-2 (Pump, Follower, and

Follower Assist Kit soldseparate)

651612-X

Extra Heavy-Duty Rams200 liters ContainersFeatures 5-1/2” diameter post construction capable of delivering 0-0,8 bar follower down force. This extra measure of down force makesthe 651612 Ram the best choice for the hard-duty supply of heavy inks,RTV silicones, caulkings, varnishes, highly viscous adhesives and muchmore. Drum hold down bracket included.

* WARNING: Before using maximum follower down force, check container or consult con-tainer manufacturer for maximum pressure rating.

Mounting footprint is strictly a reference letter used to simplify the matching ofpumps to follower plates and related accessories. (i.e. pump with “A” mountingfootprint will fit any accessory with “A” mounting footprint.

Model Follower Plate Style Container Mounting Coating Wiper Type Wiper MaterialLiters Footprint

651612-1 66516 Flat 200 A None Double Lip Nitrile651612-2 66516-1 Flat 200 A None Double Lip Polyurethane651612-3 66516-2 Flat 200 A None Double Lip EPR651612-4 66517 Flat 200 B None Double Lip Nitrile651612-5 66517-1 Flat 200 B None Double Lip Polyurethane651612-6 66517-2 Flat 200 B None Double Lip EPR651612-7 66517-2 Flat 200 B None Double Lip EPR651612-10 67196-2 Tapered 200 B None Tube Type EPR651612-11 67196-1 Tapered 200 B None Tube Type Nitrile651612-12 67196-3 Tapered 200 B None Tube Type Viton651612-59 67195-7 Flat 200 A Teflon Tube Type Viton651612-9 67195-3 Flat 200 A Teflon Tube Type Viton

Single Post RamsProvides responsive pump lifting and pump lowering – with sufficientdownforce to permit pump extrusion of materials up to 500,000 c.p.s.It’s ability to revolve 360-degrees allows the ongoing placement androtation of three, 200 liters containers - a critical feature in applicationsthat demand continuous material supply.

Model Fits Height Height AirNumber ARO Pump Raised Lowered Inlet

651614-1 4-1/4”-6” Air Motors 2,80m 1,60m 1/4” NPT651614-2 8” to 12” Air Motors 2,80m 1,60m 1/4” NPT651614-3 Small Hydraulic Motor 2,80m 1,60m 1/4” NPT651614-4 Large Hydraulic Motor 2,80m 1,60m 1/4” NPTThe above models include the brackets and hardware needed to accommodate two-ball or extrusion tie-rod style pumps.65116 Follower Plate Air Assist Kit - Air assist valve supplies ai

pressure to bottom of follower to aid in bringing follower to top in less time. Kit includes valve, hose and necessary mounting hardware.

Acc

esso

ries

57


Follower Plates 20 liters ContainersMounting footprint is strictly a reference letter used to simplify the matching of pumps to follower plates and related accessories. (i.e. pumpwith “A” mounting footprint will fit any accessory with “A” mounting footprint.

651842-166469 66732-1

Model Material Coating Wiper Type Wiper Material Ram/Lift Mounting Used With Footprint

66469 Carbon Steel None Single Lip Nitrile 651614-1, 651616-X A651615-C Rams,640169

66731 Carbon Steel Electroless Nickel Single Lip Nitrile 651615-C Rams C66731-1 Carbon Steel Electroless Nickel Double Lip Polyurethane 651614-4, 651616 C

& 651615-C Rams66731-2 Carbon Steel Electroless Nickel Double Lip EPR 651614-1, 651615-C Rams C66732 Carbon Steel Electroless Nickel Double Lip Nitrile 651614-1, 651615-C Rams A

651612-X66732-1 Carbon Steel Electroless Nickel Double Lip Polyurethane 651614-1, 651615-C Rams A

651612-X66732-2 Carbon Steel Electroless Nickel Double Lip EPR 651614-1, 651615-C Rams A

651612-X651840-1 Carbon Steel None 290-mm Single Lip Polyethylene/ 651615-C Rams C

Urethane 67075-X, 65778 Lift651840-2 Carbon Steel None 295mm. Designed Nitrile 651615-C Rams C

for metric pails 67075-X, 65778 Lift651840-3 Carbon Steel None 311.9mm. Designed Polyethylene/ 651615-C Rams C

for metric pails. Urethane 67075-X, 65778 Lift651841-1 Stainless Steel None 290-mm Polyethylene/ 651615-C Rams C

Urethane 67075-X, 65778651842-1 Stainless Steel None 290-mm Polyethylene/ 651615-C Rams D

Urethane

Accesso

ries

Follower Plate Adapter - For attachingNM2322X-X & 6712X-P43 pumps to200 liters follower plates or floor stands

Follower Plate Adapter - For attachingIntegrity pumps to follower plates orfloor stand. Includes stainless steeladapter w/2” NPT(F) threads, seal andhardware.

Seal Protectors - Package of 10 for 200liters followers to be inserted betweenthe follower plate and the material in thecontainer. This helps to prevent corrosive materials from attacking thewiper and reduces clean-up time.

Pump Follower / Floor Stand Adapters / Seal Protectors

Model Description Ram Used With Mounting Footprint67134 66516-X & 6719X-X Followers C

651616-1, -2, -3, 651614-Xand 651612-X Rams,65138 Floor Mount

67136 66248 & 66516 AFollowers.

651616-1, -2, -3 Rams65138 Floor Mount

91363-10 200 litersFollower Plates _

91364-10 20 litersFollower Plates _

67136

Seal Protectors - Package of 10 for 20 liters followers to be inserted between the followerplate and the material in the container. Thishelps to prevent corrosive materials from attacking the wiper and reduces clean-up time.


Follower Plates 200 liters ContainersMounting footprint is strictly a reference letter used to simplify the matching ofpumps to follower plates and related accessories. i.e. pump with “A” mountingfootprint will fit any accessory with “A” mounting footprint.

58

66248 66516

Model Material Coating Wiper Type Wiper Material Ram Mounting Lift Used With Footprint

66248 Carbon Steel None Single Lip Nitrile, Polyethylene 651614-X Ram Abackup 640169 Lift

66248-1 Carbon Steel None Single Lip Polyethylene 651614-X Ram A640169 Lift

66516 Aluminum None Double Lip Nitrile 651614-X A651616-X Rams

651612-X66516-1 Aluminum None Double Lip Polyurethane 651614-X A

651616-X Rams66516-2 Aluminum None Double Lip EPR 651614-X A

651616-X Rams651612-X

66516-5 Aluminum Teflon Double Lip Nitrile 651614-X A651616-X Rams

651612-X66516-6 Aluminum Teflon Double Lip Polyurethane 651614-X A

651616-X Rams651612-X

66516-7 Aluminum Teflon Double Lip EPR 651614-X A651616-X Rams

651612-X66517 Aluminum Teflon Double Lip Nitrile 651614-X B

651616-X Rams651612-X

66517-1 Aluminum Teflon Double Lip Polyurethane 651614-X B651616-X Rams

651612-X66517-2 Aluminum Teflon Double Lip EPR 651614-X B

651616-X Rams651612-X

66517-5 Aluminum Teflon Double Lip Nitrile 651614-X B651616-X Rams

651612-X66517-6 Aluminum Teflon Double Lip Polyurethane 651614-X B

651616-X Rams651612-X

66517-7 Aluminum Teflon Double Lip EPR 651614-X B651616-X Rams

651612-X

Acc

esso

ries

59


Follower Plates 200 liters ContainersMounting footprint is strictly a reference letter used to simplify the matching ofpumps to follower plates and related accessories. (i.e. pump with “A” mountingfootprint will fit any accessory with “A” mounting footprint.

6719X-X

Model Material Coating Wiper Type Wiper Material Ram Mounting Lift Used With Footprint

67195-1 Aluminum None Tube Type Neoprene 651614-X A651616-X 651612-X

67195-2 Aluminum None Tube Type EPR 651614-X A651616-X 651612-X

67195-3 Aluminum None Tube Type Viton 651614-X A651616-X 651612-X

67195-5 Aluminum Teflon Tube Type Neoprene 651614-X A651616-X 651612-X

67195-6 Aluminum Teflon Tube Type EPR 651614-X A651616-X 651612-X

67195-7 Aluminum Teflon Tube Type Viton 651614-X A651616-X 651612-X

67196-1 Aluminum None Tube Type Nitrile 651614-X B651616-X 651612-X

67196-2 Aluminum None Tube Type EPR 651614-X B651616-X 651612-X

67196-3 Aluminum None Tube Type Viton 651614-X B651616-X 651612-X

67196-5 Aluminum Teflon Tube Type Nitrile 651614-X B651616-X 651612-X

67196-6 Aluminum Teflon Tube Type EPR 651614-X B651616-X 651612-X

67196-7 Aluminum Teflon Tube Type Viton 651614-X B651616-X 651612-X

Accesso

ries


60

Downstream Regulator

3/4” PortsModel

High Pressure RemoteModel

The ARO I.D.L.® FluidRegulator features smooth,consistent pressure regulationwith easy-turn adjustment.Patented easy-access seat plugpermits immediate serviceaccess to the regulator’s balland seat. Patented “floating”ball and seat design maintainsproper regulation, even duringsignificant fluctuations in linepressure.

Backpressure Models

Model Base Seat Reg. Pressure MaximumHousing Range Inlet

Bars PressureBars

651780-A1A-B C/S T/C 28-86 207651780-A1B-B C/S T/C 69-207 414651780-A3A-B S/S T/C 28-86 207651780-A3B-B S/S T/C 69-207 414

651780-B1A-B C/S T/C 28-86 207651780-B1B-B C/S T/C 69-207 414651780-B3A-B S/S T/C 28-86 207651780-B3B-B S/S T/C 69-207 414

651780-CAB-B C/S T/C 52-172 414651780-C1C-B C/S T/C 138-345 414651780-C3B-B C/S T/C 52-172 414

651780-B1R-B C/S T/C 14-345 414651780-B3R-B S/S T/C 14-345 414

651780-C1R-B C/S T/C 14-345 414651780-C3R-B S/S T/C 52-345 414**Flow rates tested in 55 CPS material

3/8" ports, standard flow to 11,4 liters

C/S Carbon SteelS/S Stainless SteelZ/A Zinc Aluminum

T/C Tungsten Carbide3/S 300 Series Stainless SteelZ 0 Zinc

Code Description Code Description

Material Codes

Acc

esso

ries

3/8" ports, high-flow to 22,7 liters

3/4" ports, mastic-flow to 75,7 liters

3/8" ports, remote models, high flow to 22,7 liters

3/4" ports, remote models, mastic-flow to 75,7 liters**

Model Base Seat Reg. Pressure MaximumHousing Range Inlet

Bars PressureBars

651781-B1B-1 C/S T/C 7-207 207651781-B3B-B S/S T/C 7-207 207

651781-C1B-B C/S T/C 7-207 207651781-C3B-B S/S T/C 7-207 207

3/8" ports, high- flow to 22,7 liters

3/4" ports, backpressure models, mastic-flow to 75,7 liters**

High Pressure - Fluid Regulators

61


27520-200

1 1/4” Ports Model

Low-Pressure Remote Model

Downstream Regulators

Model Base Seat Reg. Pressure Working Inlet GaugeHousing Range Pressure Pressure Pressure

Bars w/Gauge Rangebars

651790_A1B_B Z/A T/C 0-2 8.3 51.7 0-4651790-A1B-B Z/A T/C 0-2 8.3 51.7 0-7651790-A1D-B Z/A T/C 3.4-14 41.3 51.7 0-20651790-A2D-B S/S 4/S 3.4-14 41.3 51.7 0-20651790-A3B-B S/S T/C 0-2 8.3 51.7 0-4651790-A3C-B S/S T/C 1.3-4.1 8.3 51.7 0-4651790-A3D-B S/S T/C 3.4-14 41.3 51.7 0-20651790-A4B-B S/S 3/S 0-2 8.3 34 0-4651790-A4C-B S/S 3/S 1.3-4.1 8.3 34 0-4651790-A4D-B S/S 3/S 3.4-14 41.3 34 0-20

651790-B1D-B Z/A T/C 2-14 41.4 86 0-20651790-B1E-B Z/A T/C 7-55 86.2 86 0-69651790-B3D-B S/S T/C 2-14 41.4 86 0-20651790-B3E-B S/S T/C 7-55 86.2 86 0-69651790-B4D-B S/S 3/S 2-14 41.4 34 0-20Gauge included

651790-A1R-B Z/A T/C 2-14 34 51.7 -651790-A3R-B* S/S T/C 2-14 34 51.7

651790-B4R-B S/S 3/S 2-14 34 - -*Gauge NOT included**Flow rates tested in 30 wt. Oil

3/8” PortsModel

3/8”ports, standard flow to 11.4 liters


Model Inlet Regulated Materials of Construction Gauge Gauge (orderbars bars Bonnet Ball Seat Pin. Dia. Inlet NPT separately)

27500-000 52 9 Z T/C T/C T/C T 1/4 (F) 93504-127500-100 52 3 Z T/C T/C T/C T 1/4 (F) 6510727500-200 52 17 Z T/C T/C T/C T 1/4 (F) 93504-127500-400 52 2 Z T/C T/C T/C T 1/4 (F) 93769

Accesso

ries

3/8”ports, high flow to 22.7 liters

3/8”ports, remote models, flow to 11,4 liters

3/8”ports, remote models, flow to 22,7 liters


Model Base Seat Reg. Pressure Working Inlet GaugeHousing Range Pressure Pressure Pressure

Bars w/Gauge Rangebars

651791-B1D-B Z/A T/C 0-14 14 0-20651791-B1E-B Z/A T/C 0-55 55 55 0-69651791-B3D-B S/S T/C 0-14 14 14 0-20651791-B3E-B S/S T/C 0-55 55 55 0-69651791-B4D-B S/S 3/S 0-14 14 0-20

651791-C3D-B S/S T/C 0-14 14 0-20651791-C4D-B S/S 3/S 0-14 14 14 0-20**Flow rates tested in 55 CPS material

3/8”ports, high -flow to 22,7 liters

1-1/4”ports, system-flow to 70 liters

The ARO I.D.L.® FluidRegulator features smooth,consistent pressure regulationwith easy-turn adjustment.Patented easy-access seat plugpermits immediate serviceaccess to the regulator’s balland seat. Patented “floating”ball and seat design maintainsproper regulation, even duringsignificant fluctuations in linepressure.

Low Pressure - Fluid Regulators


62

Measuring Cylinder SystemUtilize ARO pumps, measuring cylinders, a manual 4-way fluid control valve, stan-dard hoses and dispensing valves. Shifting the control valve in either direction willallow the cylinder to fill to a pre-set volume.

ARO® metered pumping systems provide an economical method of dispensing flu-ids into containers or batch processes in desired quantities. Among the many bene-fits these systems offer are increased productivity. Improved accuracy, anddecreased product waste. As always, your ARO representative is prepared to dis-cuss your metering system needs.

Filter/Regulator/Lubricator

Flow Gun (Dispensing Valve)

4-Way Control ValveMeasuring Cylinder

Pump Assembly

Air Inlet

Suggested System Components •Aro Pump•Flow Gun (Dispensing Valve)•Airline Filter, Regulator, Lubricator

•Measuring Cylinder - see below for details•4-way Control Valve - see below for details

Select fromthis catalog.

Accuracy The measuring cylinder system has a consistant accuracy rate of + 2%,depending on material characteristics.

Measuring Cylinders665006 Measures 0 to 113 cm3, 241 mm long, 76,20 mm wide and

105 mm high. Dispenses predetermined quantities of fluid or semi-fluid material. 345 bars pressure, 1/4 inch NPTF.Constructed of carbon steel with neoprene seals & Buna-N O-rings.

665007 Measures 113 to 226 cm3, 305 mm long, 76,20 mm wide and 105 mm high. 345 bars pressure rating.

665008 Measures 354 to 473 cm3, 432 mm long, 76,20 mm wide and 105 mm high. 345bars pressure rating.

Manual Control Valve665009 Four-way control valve for ARO measuring cylinders.

Pressurerating up to 345 bars All steel consturction. 235 mm high, 228 mm long, 63,5 mm wide, 1/4” NPTF inlet and outlet.

665009

665008

Acc

esso

ries

63

Automatic Extrusion Guns


651511

651513

641523-1(Shown with 66541-XX)

651533

651500

Model Description Pumps Port Size WorkingNumber Used With In. NPT Pressure

Bars*651511 Flow Gun - Requires 345 3/8 .250 (6) & (2) 3.4

4-way air valve to open NPT 11/16-16 1/8 F at and close. Adjusting (F) (2) (M) 138 barsscrew varies stroke length. fluidSecures to 1/2” diameter pressurerod by allen screw. Aluminum body with tungsten carbide seats. Order 66541-XX Extrusion Nozzle Kit separately.

651513-11-B Flow Gun - Has air 345 1/4 .093 (2.3) 1/8 3.4open, spring return NPS & 11/16-16 (F) at actuator. Requires (M) (M) 138 bars 3-way air valve to open. fluidAdjusting screw varies pressurestroke length. Securesto 1/2” diameter rod by allen screw. 316 stainless steel with tungsten carbide seat. Order 66541-XX Extrusion Nozzle Kit separately.

651535-2 Snuff-Back Gun - High 345 3/8 1/4 (2)flow automatic dispensing NPT NPS 1/8gun is designed to handle (F) (F) NPT (F)high-viscosity materials. (2)Requires a 4-way air valveto open and close.

651537-1 Flow Gun - Similar to 345 3/8 3/8 (2) 3.4651511 except with carbon NPT 18 (M) 1/8 atsteel body tungsten carbide 138 barsball and seat. fluid

pressure

Manual Extrusion Guns

Model Description Max Fluid Fluid Inlet Fluid OutletNumber Pressure Bars In. mm ID & Thread mm*651500 Flow Gun - Aluminum body with 517 3/8 (F) 6 &

tungsten carbide seats. 11/16-16 (M)Order 66541-XX Extrusion Nozzle Kit separately.

651533 Flow Gun - Wetted parts of 316 345 1/4 2.3 &series stainless steel with tungsten NPT (M) 11/16-16 (M)carbide seats.Order 66541-XX Extrusion Nozzle Kit separately.

641523-1 Flow Gun - Wetted parts of 300 207 3/8 (F) 6 &Series stainless steel with Teflon 1/4 NPT(F)packings. Order 76751 Adapterand 66541-XX Extrusion Nozzle Kit separately.

*WARNING: Do not use with halogenated hydrocarbons. This model contains aluminum parts thatcome in contact with the material being dispensed. Aluminum is not compatible withhalogenated hydrocarbon solvents.

Accesso

ries


64

Automatic Airless Spray Guns

66541-XX

651511-1

651513-12-B

Extrusion Gun Nozzle Kits76751 Adapter - 1/4NPT(M) to 11/16-16(M) adapts 66541-XX Extrusion Nozzle Kit

to fluid outlet for 641523-1 Flow Gun.

66541-XX Extrusion Nozzle Kit - Used on manual or automatic extrusion guns.Hardened steel assembly includes nozzle and cap. 11/16-16 UN(F).

Model Ø Orifice mm Model Ø Orifice mm Model Ø Orifice mm66541-3 0.08 66541-9 2.4 66541-17 4.466541-4 1.2 66541-12 3.2 66541-18 4.766541-6 1.6 66541-15 4.0 66541-25 6.4

66541-37 9.5

Model Description Max Fluid Fluid Fluid Air Inlet Min. AirNumber Pressure Inlet Outlet I.D. Outlet Pressure

Bars Inches mm mm to Open& Thread NPT Bars

651511-1 SPRAY GUN - Requires 345 (2) 3/8 6 (2) 1/8 (F) 3.44-way air valve to open NPT (F) & at & close. Adjusting screw 11/16-16 (M) 138 barsvaries stroke length. Se- fluidcures to 1/2” diameter rod pressureby Allen screw. Aluminumbody with tungsten carbideseats. Includes 66504 TIPGUARD and NUT. OrderTC-XXX SPRAY TIPseparately. See page 69

651513-12-B SPRAY GUN - Has air 345 1/4 NPS(M) 2.3 1/8 (F) 3.4open, spring return & at cylinder. Requires 3-way air 11/16-16 (M) 138 barsvalve to open. Adjusting fluidscrew varies stroke length. pressureSecure to 1/2” diameter rodby Allen screw. 316 Stainlesssteel body with tungstencarbide seat. Includes66504 TIP GUARD and NUT.Order TC-XXXX SPRAY TIPseparately. See page 69

651513-22-B SPRAY GUN - Same as 5000 1/4 NPS(M) 2.3 1/8 (F) 3.4651513-12-B except it (345) & at has an air open, air return 11/16-16 (M) 138 barscylinder, and requires a 4- fluidway air valve to open. pressure

651514-12-B SPRAY GUN - Same as 345 (2) 1/4 2.3 1/8 (F) 3.4651513-12-B except it NPS(M) & at has extra fluid port so gun 11/16-16 (M) 138 barscan be used in recirculating fluidsystems. Includes 66504 pressureTIP GUARD and NUT.Order TC-XXXX SPRAY TIPseparately. See page 69

651514-22-B SPRAY GUN - Same as 345 (2) 1/4 2.3 1/8 (F) 3.4651514-12-B except it NPS(M) & athas an air open, air return 11/16-16 (M) 138 barscylinder and requires a 4- fluidway air valve to open. pressure

Acc

esso

ries

65

Manual Airless Spray Guns


651551

65030-1

651555-B

651533

651500-1

Model Description Max. Fluid Fluid Fluid Outlet I.D.Number Pressure Inlet mm

Bars Inches & Thread651533 SPRAY GUN – Wetted parts of 316 345 1/4 2.3 &

stainless steel with tungsten carbide NPS(M) 11/16-16 (M)seats. Used to airless spray paints, lacquers, and otherlight fluids. Includes66504 TIP GUARD and NUT. Order TC-XXXXSPRAY TIP separately.

*651500-1 SPRAY GUN – Aluminum body with 517 3/8 6 &tungsten carbide seats. Used for airless NPT(F) 11/16-16 (M)spraying material over 200,000 CPS. Includes 66504 TIP GUARD and NUT. Order TC-XXXX SPRAY TIPS separately.

*WARNING: Do not use with halogenated hydrocarbons. This model contains aluminum parts that comein contact with the material being dispensed. Aluminum is not compatible with halogenated hydrocarbonsolvents.

Model Description Used with66504 TIP GUARD AND NUT - Secure TC-XXXX SPRAY TIP All manual and automatic

SPRAY GUN. Guard is required on all airless SPRAY GUNSapplications. Order SPRAY TIP separately.

651555-B QUICK CLEAN - Spray tip locked in operating All manual and automaticposition until reversed with lever for cleaning. SPRAY GUNSFor spraying heavy viscosity material. Order TC-XXXX-D SPRAY TIP separately.

651551 QUICK CLEAN - Spray tip locked in operating 651500-1 SPRAY GUNposition until reversed with lever for cleaning. (To adapt 651551 to fitFor spraying heavy viscosity material. 651533, order: 76555 pilot,Order TC-XXXX SPRAY TIP separately 92367 retaining nut. Y167-1

1/8(M) x 1/4 (F) adapter.65030-1-B SWIVEL-1/4 NPTM(M) x 1/4 NPSM(F). Swivels 360°. All manual and automatic

No filter included. For SWIVEL and FILTER see model SPRAY GUNSnumbers below.65030-5-B 120 mesh Stainless Steel Filter65030-9-B70 mesh Stainless Steel Filter

65809-X FILTER - 40 mesh Stainless Steel Filter. For finer mesh 65030-X SWIVELscreen, see below.65809-3 200 mesh65809-5 120 mesh65809-9 70 mesh

65888-X PRE-ORIFICE - Accelerates fluid stream entering spray All manual and automatictip to provide complete atomization. Mounts directly SPRAY GUNSbehind TC-XXXX SPRAY TIP.

Model Orifice Used with Spray Tips HavingDiameter These Equivalent Orifice

65888-9 .009 .007 or .00965888-13 .013 .01165888-16 .016 .013 or.01565888-20 .020 .015 or.01865888-25 .025 .018 or .021

Accesso

ries


66

Airless Spray Tips

Model -D Equiv. Pattern Flow rate liters/mn @ Fluid BarsNumber Models Orifice Width 35 69 103 138

mmTC540 – .005 178 0.06 0.08 0.10 0.11

TC715 – .007 76 0.11 0.15 0.19 0.23

TC925 -D .009 140 0.15 0.23 0.25 0.30

TC950 – .009 216 0.15 0.23 0.25 0.30

TC965 – .009 254 0.15 0.23 0.25 0.30

TC1115 -D .011 76 0.23 0.30 0.38 0.46

TC1125 -D .011 140 0.23 0.30 0.38 0.46

TC1140 -D .011 178 0.23 0.30 0.38 0.46

TC1150 -D .011 216 0.23 0.30 0.38 0.46

TC1165 -D .011 254 0.23 0.30 0.38 0.46

TC1180 – .011 292 0.23 0.30 0.38 0.46

TC1325 – .013 140 0.34 0.46 0.57 0.68

TC1340 -D .013 203 0.34 0.46 0.57 0.68

TC1350 -D .013 229 0.34 0.46 0.57 0.68

TC1365 -D .013 227 0.34 0.46 0.57 0.68

TC1380 -D .013 330 0.34 0.46 0.57 0.68

TC1525 -D .015 152 0.46 0.61 0.38 0.87

TC1540 -D .015 208 0.46 0.61 0.38 0.87

TC1550 -D .015 254 0.46 0.61 0.38 0.87

TC1565 -D .015 305 0.46 0.61 0.38 0.87

TC1580 -D .015 356 0.46 0.61 0.38 0.87

TC1595 – .015 394 0.46 0.61 0.38 0.87

TC1825 -D .018 152 0.68 0.95 1.14 1.37

TC1840 .018 216 0.68 0.95 1.14 1.37

TC1850 -D .018 254 0.68 0.95 1.14 1.37

TC1865 -D .018 330 0.68 0.95 1.14 1.37

TC1880 -D .018 381 0.68 0.95 1.14 1.37

TC1895 – .018 432 0.68 0.95 1.14 1.37

TC2095 – .020 457 0.76 1.06 1.33 1.52

TC2140 -D .021 216 0.91 1.25 1.56 1.79

TC2150 -D .021 292 0.91 1.25 1.56 1.79

TC2165 -D .021 381 0.91 1.25 1.56 1.79

TC2180 -D .021 432 0.91 1.25 1.56 1.79

TC2440 -D .024 229 1.14 1.60 1.98 2.28

TC2465 – .024 381 1.14 1.60 1.98 2.28

TC2480 – .024 470 1.14 1.60 1.98 2.28

TC2495 – .024 533 1.14 1.60 1.98 2.28

TC2625 .026 178 1.33 1.90 2.32 2.70

TC2650 -D .026 305 1.33 1.90 2.32 2.70

TC2665 -D .025 381 1.33 1.90 2.32 2.70

TC2680 -D .026 470 1.33 1.90 2.32 2.70

TC2695 – .026 533 1.33 1.90 2.32 2.70

TC2965 -D .029 381 1.71 2.39 3.04 3.42

TC2995 – .029 546 1.71 2.39 3.04 3.42

TC3140-D -D .031 229 2.01 2.85 3.50 4.18

TC3195 – .031 546 2.01 2.85 3.50 4.18

TC3640 -D .036 229 2.70 3.80 4.56 5.32

TC3650 .036 305 2.70 3.80 4.56 5.32

TC3680 – .036 470 2.70 3.80 4.56 5.32

TC4195 – .041 546 3.34 4.56 5.70 6.84

TC4340 – .043 229 4.18 5.70 6.84 7.98

TC4365 – .043 381 4.18 5.70 6.84 7.98

TC4895 – .048 559 4.56 6.46 7.98 9.50

TC5240 – .052 229 5.32 7.60 9.12 10.64

TC5265 – .052 381 5.32 7.60 9.12 10.64

TC6265 – .062 381 7.98 11.40 14.06 15.96

TC7265 – .072 381 10.64 15.20 18.62 15.96

TC8565 – .085 381 15.58 21.66 25.46 30.82

EQUIVALENT ORIFICE:Airless tip orifices are ellipti-cal in shape. The term“equivalent orifice diameter”refers to circular orifice diam-eter which will provide thesame flow rate as the ellipticalorifice. The equivalent orificediameter does not indicateactual orifice dimensions.

PATTERN WIDTH: Thisdimension is the nominal pattern width of each tipwhen tested on a coatingmaterial of 20 seconds – No.4 Zahn cup viscosity at104 bars at a 12” distancefrom the tip.

FLOW RATE IN l/mn: Theflow rates of ARO airless tipsare given as l/mn on water atpressures shown:Capacities will vary to somedegree on other materials.

Model Number Significance

TC = Tungsten Carbide15 = .015 Orifice Diameter65 = 65° Spray Pattern-D = Tips are for use with

651555-B Quick Clean only

Acc

esso

ries

67

Recirculating System


651747-X-B

Model Description Used Inlet RecirculatingNumber With Port Port

Inches Inches91600 RECIRCULATING BLOCK- Pumps with 3/4 PTF 1/4 NPTF(F)

Used in recirculating systems 3/4” female shortwhere material particles mustbe Inlet femalekept in suspension 3/4” NPTF (M) thread inlet female to inlet of pump. 241 bars Max working pressure

661173 WAY VALVE - Used on the return Recirculating 1/4 NPT(F) (2) 1/4 NPSMleg of a recirculating system. systems thatCan be used to (1) Evacuate air are closed andwhen introducing material into circulatingthe system. (2) Direct material back directly backto the foot valve of the pump. to the foot(3) Flush system when changing valve of thematerial or clean up. Maximum pump.working pressure 276 bars.

Model Description Used Inlet RecirculatingNumber With Port Port

Inches Bars79244 DOUBLE INLET ADAPTER 651533 Manual (2) 1/4 221

Used in recir-culating systems Spray Gun or NPS(M)where material particles must be 651513 automatickept in suspension. Attaches Spray Gundirectly to fluid inlet of gun with single fluid inlet tube. Suggest use of 65030-X Swivel between the gun and Double Inlet Adapter forgreater maneuverability. Connection to gunis 1/4” NPS(F).

Model Volt AMPS Heater Heater Temp. Recovery Working fluidNumber AC Wattage Accuracy Rise Rate Pressure Inlet &

(Celcius) Above Liters bars OutletAmbient per Hour NPT(Celcius)

Cast aluminum with stainless steel fluid passages. Externally adjustable thermostat is variablefrom 15 C° to 120 C°. Explosion proof construction for Class I, Group D hazardous environments. CSA approved.651747-1-B 120 16.6 2000 ±1.9° 38° 56.8 345 1/2 F651747-2-B 240 8.3 2000 ±1.9° 38° 56.8 345 1/2 F651747-3-B 440 4.5 2000 ±1.9° 38° 56.8 345 1/2 F651747-2-M* 240 8.3 2000 ±1.9° 38° 56.8 345 1/2 F

Model Description Fluid Fluid Gauge MaximumNumber Inlet Outlet Port Working

NPT NPT NPT Pressure bars66062 Thermometer Kit 1/2 (M) 1/2 (M) 1/4 (F) 345Assembly Includes thermometer and outlet block. Senses fluid temperature.

Model Description Used with66258 MOUNTING BRACKET - Bracket assembly with appropriate 651747-X

mounting holes to affix heater to vertical substrate. FLUID HEATERS

Fluid Heaters

Accesso

ries

*Atex Cenelec


68

Material Filters

651418-XX-B

651420-XX-B

651412-X

93944-70

Model Maxi. fluid Filter Filter FilterNumber Pressure Bars Mesh Microns Inlet(s) Size Outlet(s) Size

NTP (Qty) NTP (Qty)

651412 345 70 200 1/4-F (2) 1/4-F (3)651412-8 345 100 149 1/4-F (2) 1/4-F (3)Bottom swivel.

1/4” fluid inlet/carbon steel construction

651422-40 414 40 375 1/2-F (2) 1/2-F (1)651422-70 414 70 200 1/2-F (2) 1/2-F (1)651422-100 414 100 149 1/2-F (2) 1/2-F (1)

1/2” fluid inlet/stainless steel construction (passivated)

651420-40 414 40 375 1/2-F (2) 1/2-F (1)651420-70 414 70 200 1/2-F (2) 1/2-F (1)651420-100 414 100 149 1/2-F (2) 1/2-F (1)651421-70 414 Dual Screens 1-8 3/4-F (1)

1/2" fluid inlet/carbon steel construction (e-nickel plated)

651418-40-B 41 40 375 1-F (2) 3/8-F (3)651418-70-B 414 70 200 1-F (2) 3/8-F (3)651418-100-B 414 100 149 1-F (2) 3/8-F (3)

1” fluid inlet/stainless steel construction (e-nickel plated)

Material Filters ScreensModel Screen Mesh Filter Used With91192-1 40 65141291192-2 70 65141291192-3 100 65141291192-4 200 65141293944-40 40 651420 & 65142293944-70 70 651420 & 65142293944-100 100 651420 & 65142293945-40 40 65141893945-70 70 65141893945-100 100 651418

Acc

esso

ries

69


Air filter/Regulator/Lubricator

C28121-800

P29122-600

C28241-810

P29241-610

Accesso

ries

Model Description Pumps Port Reg. Pressure Max.Number Used Size Range Flow

With NPT bars Pressure

C28121-800 Filter/Regulator/Lubricator 2” & 3”, 1/4 (F) 0.3-8.6 6 dm3/sDrop/fog-type lubrication, air motor20 micron filter, pumpspolycarbonate bowl w/guard.

P29122-600 Filter/Regulator 2” & “N”, 1/4 (F) 0.3-8.5 6 dm3/sDrop/fog-type lubrication, air motors20 micron filter,polycarbonate bowl w/guard.

Module/Air 1000TM F/R/L

C28241-810 Filter/Regulator/Lubricator 41⁄4” & 1/2 (F) 0.3-8.6 52 dm3/sDrop/fog-type lubrication, 6” air40 micron filter, motormetal bowls w/ sight glass. pumps

P29241-610 Filter/Regulator 41⁄4” & 6” 1/2 (F) 0.3-8.5 66 dm3/sDrop/fog-type lubrication, air motors40 micron filter,metal bowls w/ sight glass.

Module/Air 2000TM F/R/L

651729 Kit Assembly 10” 3/4 (M) 0.3-8.6 35 dm3/sHeavy-Duty FRL w/ hose & 12”& mounting bracket for air motorinstallation to Two Post pumpsRam.

651730 Kit Assembly 8” 3/4 (M) 0.3-8.6 35 dm3/sHeavy-Duty FRL w/ hose air motor& mounting bracket for pumpsinstallation to Two Post Ram.

65940 Kit Assembly 41⁄4” & 1/2 (M) 0.3-13.8 31 dm3/sHeavy-Duty FRL w/ hose 6” air& mounting bracket for motorinstallation to Two Post pumpsRam.

F/R/L Assemblies


70

Module/Air 3000 Piggyback Lubricator• The Module/Air 3000 Heavy-Duty Series units extend the life of air operated equipment

while reducing operating costs. These units efficiently remove solid particles from compressed air lines-making them the perfect choice for large flow applications.

• Polycarbonate bowl with metal guard standard.• Automatic drain has pipe connection for draining away contaminants.• Push-pull, non-rising adjustment knob.• Bracket and Gauge comes standard with all units.

IN OUT

DRAIN DRAIN

4.35(110.5)

10.35(263)

3.39(86)

3.39

0.43

4.31

UNF 1/2-20AUTODRAIN

1/4” NPT (2)

3.52 4-M5.0*PO.8

IN 0 OUT IN

10.3510.35

3.39 3.39

7.837.05

7.056.26

1/4” NPT (2) 1/4” NPT (2)

1/4” NPT

4-M5.0*PO.8 4-M5.0*PO.8

Module/Air 3000 Piggyback LubricatorPerformance SpecificationsConstruction Piston Type RegulationMaterial Body/Aluminum Die-Cast - Bowl/PolycarbonateFilter Element 40 Micron (Standard)Temperature Range -10 to 60 C°Pressure Range 0.4 to 11.7 barsMax. Pressure 11.7 barsMax. Flow Rate Piggyback, 141 l/s - Lubricator, 151 l/sMedia Compressed AirBowl Capacity Filter, 298 g. - Lubricator, 227g.Seals Buna-NWeight Piggyback-Lube, 2105 g - Piggyback, 1360 g

Acc

esso

ries

Ordering Information

Piggyback/LubricatorCombo

Piggyback

Model DescriptionP29351-600 Piggyback, 3/4” NPT, w/Gauge & BracketP29351-604 Piggyback, 3/4” NPT, w/Gauge, Bracket & Auto DrainC28351-600 Piggyback/Lube Combo, 3/4” NPT, w/Gauge & Bracket100067 Gauge, 0-11 bars104282 Bracket104283 Auto Drain104284 Filter Element, 40 Micron (Standard)104285 Filter Element, 5 Micron104286 Filter Bowl104287 Lubricator Bowl

71


2-Way Solenoid/Pilot Acting Valves

Model Port Cv Voltage 2” 3” 4-1/4” 6” 8” 10” 12”Number SizeTB03EB-024-D 3/8” 4.5 24 DC • •TB03EB-120-A 3/8” 4.5 120 AC • •TB04EB-024-D 1/2” 4.5 24 DC • •TB04EB-120-A 1/2” 4.5 120 AC • •TB06EB-024-D 3/4” 12.0 24 DC • • •TB06EB-120-A 3/4” 12.0 120 AC • • •Nota : See page 75 for cable connectors

2-Way Direct Acting Solenoid Valves

Model Port Cv Voltage 2” 3” 4-1/4” 6” 8” 10” 12”Number Size

TB022B-024-D 1/4” .18 24 DC •TB022B-120-A 1/4” .18 120 AC •TB035B-024-D 3/8” 4.0 24 DC • • •TB035B-120-A 3/8” 4.0 120 AC • • •TB045B-024-D 1/2” 4.0 24 DC • •TB045B-120-A 1/2” 4.0 120 AC • •TB066B-024-D 3/4” 8.6 24 DC • • •TB066B-120-A 3/4” 8.6 120 AC • • •Nota : See page 75 for cable connectors

3-Way Solenoid Actuated Valves

Model Port Cv Voltage 2” 3” 4-1/4” 6” 8” 10” 12”Number Size

CAT66P-024-D 1/4” .2 24 DC •CAT66P-120-A 1/4” .2 120 AC •MQ3728-024-D 1/4” 1.5 24 DC •MQ3728-120-A 1/4” 1.5 120 AC •H253SS-024-D 3/8” 2.2 24 DC • •H253SS-120-A 3/8” 2.2 120 AC • •H254SS-024-D 1/2” 2.4 24 DC • •H254SS-120-A 1/2” 2.4 120 AC • •MQ3729-024-D 3/4” 7.5 24 DC • • •MQ3729-120-A 3/4” 7.5 120 AC • • •Nota : See page 75 for cable connectors

Air Control Needle ValvesModel Port Cv 2” 3” 4-1/4” 6” 8” 10” 12”Number Size104104-NS2 1/4” • •104104-N02 1/4” • •104104-N04 1/2” 4.5 • •104104-N06 3/4” 4.5 • • •

Lock-Out Valves/Hasp

Model Port 2” 3” 4-1/4” 6” 8” 10” 12”Number Size

104253-2* 1/4” •104174-2 1/4” • •104174-4 1/2” • •100085 (Hasp) 1/2” • • • • • • •*Safety lock-out for module air 1000

•Normally Closed•Brass Body•Stainless Steel Steel •Spring Return•Connector Option Include

CSN-30 or CHW-30

•Normally Closed•Brass Body•Stainless Steel Stem•Spring Return•Connector Options include

CSN-30 or CHW-30,exception 1/4”valve whichuses CSN or CHW.

•Normally Closed•Aluminum Body•Spring Return•Connector Options include

CSN-30 or CHW-30 forCAT66-P, or CSN or CHWfor all others

•Composite Body•Can be Panel Mounted•Infinite Control Settings•Corrosion-Resistant

Stainless Steel Insert & Stem

CAT66P MQ3728

H253SS

MQ3729

•Meets OSHA lock-out /tag-out regulations

•Installs upstream of air filter / regulator unit

104104-N02

104174

100085

Accesso

ries


72

Module Air 2000Filter / Regulator

Lock-out Valve with Hasp

Solenoid-ActuatedValve

Solenoid-ActuatedValve

AirNeedleValve

AirNeedle

Valve

Air lineConnection

Kit

Air lineConnection

Kit

ARO Diaphragm Pump

ARO Piston Pump

Typical Installation

Connectors/Coils

Code Description Code DescriptionCSN Strain relief connector for 3-way valves 116218-39 22 mm, 24 VDC CoilCSN-30 Strain relief connector for 2-way valves and CAT66P-XXX-X Valves 116218-33 22 mm, 120 VAC CoilCHW Molded cable connector for 3-way valves, 36” molded leads 119378-39 30 mm, 24 VDC CoilCHW-30 Molded cable connector for 2-way valves and CAT66P-XXX-X, 36” molded leads 119378-33 30 mm, 120 VAC Coil

Acc

esso

ries

73


Over-Run Controls

Model Description Pumps Air Air PressureNumber Used Inlet Outlet Range

With NPT NTP Bars635040 ARO-STOP® Valve “N” Series, 1/4 (F) 1/4 (M) 1.4-12

Shuts off air to the pump air motorwhen material container is pumpsempty or line is broken. onlyQuick set and reset feature.

23644-400 ARO-STOP® Valve 41⁄4” & 1/2 (F) 1/2 (M) 1.4-12Shuts off air to the pump 6” airwhen material container is motorempty or line is broken. pumpsQuick set and reset feature.

635043 ARO-STOP® Valve 8’, 10” 3/4 (F) 3/4 (M) 1.4-12Shuts off air to the pump & 12”when material container is air motorempty or line is broken. pumpsQuick set and reset feature. only

Air Motor Mufler

Model Description Pumps Air SizeNumber Used Inlet mmXmm

With NPT91790 Air Motor Muffler 41⁄4” & 6” 1-1/4 (M) 89 x 284

Reduces air exhaust noise level air motorto acceptable OSHA standards. pumps

92460 Air Motor Muffler 8” air motor, 1-1/4 (M) 143 x 391Reduces air exhaust noise level pumpsto acceptable OSHA standards.

66718 Air Motor Muffler 10” & 12” Bolted-on 229 x 508Reduces air exhaust noise level air motor,to acceptable OSHA standards. pumps

Model Description PumpsNumber Used

With66333-B Wet Sol - 0,95 liter Container All pumps

Designed to prolong packing life by keeping with wet cups.the piston rod and packings wetted. Alsoreduces the possibility of material hardeningon the piston rod.

66334-B Wet Sol - 3,75 liters Container

Wet Sol “Plus”

635040

66718

9246091790

66334-B

Accesso

ries


74

Acc

esso

ries

Warranty

All ARO Pumps are backed up by our famous 5-year warranty, asa measure of the confidence we place in the quality of theseproducts. A confidence that you can share.

PUMP FIVE-YEAR WARRANTY

Ingersoll Rand/ARO warrants to the original use purchaser ofIngersoll Rand/ARO manufactured pumps that IngersollRand/ARO will repair or replace, free of charges, includingreturn shipping costs within the Continental United Statesof America, any such product which under normal use andservice proves defective in material or workmanship, asdetermined by Ingersoll Rand/ARO Inspection, within FIVE YEARSfrom date of shipment from Ingersoll Rand/ARO, provided theclaimed defective product, or part thereof, is promptlyreturned to the Ingersoll Rand/ARO factory or IngersollRand/ARO authorized warranty repair center with transportationprepaid.

This warranty does not cover failure of parts or componentsdue to normal wear or damage, which in the judgment of IngersollRand/ARO, arises from misuse, abrasion, corrosion, negligence,accident, substitution of non-Ingersoll Rand/ARO parts, faultyinstallation or tampering.

If Ingersoll Rand/ARO Inspection discloses no defect inmaterial or workmanship, repair or replacement and returnwill be made at customary charges.

This warranty covers Ingersoll Rand/ARO manufacturedpumps shipped on or after July 4, 1988.

Equipment not covered by Ingersoll Rand/ARO warranty:accessories or components of equipment sold by IngersollRand/ARO that are not manufactured by Ingersoll Rand/ARO(such as switches, hoses, gasoline engines, etc.) are subjectto the warranty, if any, of their manufacturer. IngersollRand/ARO will provide the purchaser with reasonableassistance in making such claims.

The foregoing warranty supersedes, voids and is in lieu ofall or any other warranties, express or implied, and nowarranty or merchantability or fitness for particular purposeis intended or made. Ingersoll Rand/ARO's sole obligation andthe original use purchaser's sole remedy is as stated aboveand in no event shall Ingersoll Rand/ARO be liable for any special,direct, indirect, incidental, consequential or other damages,or expenses of any nature including, without limitation, lossof profits or production time incurred by the original usepurchaser or any other party.

Viscosity Conversion Chart

SayboltCenti Universal Saybolt Ford Ford Zahn Zahn ZahnPoise Poise (SSU) Furol No. 3 No. 4 No. 1 No. 2 No. 3

1 .01 312 .02 344 .04 387 .07 47 810 .10 60 9 5 30 1615 .15 80 13 10 8 34 1720 .20 100 15 12 10 37 1825 .24 130 17 15 12 41 1930 .30 160 19 19 14 44 2040 .40 210 24 25 18 52 2250 .50 260 29 29 22 60 2460 .60 320 34 33 25 68 2770 .70 370 39 36 28 72 3080 .80 430 42 41 31 81 3490 .90 480 49 45 32 88 37 10100 1.0 530 54 50 34 41 12120 1.2 580 59 58 41 49 14140 1.4 690 70 66 45 58 16160 1.6 790 79 72 50 66 18180 1.8 900 91 81 54 74 20200 2.0 1000 100 90 58 82 23220 2.2 1100 110 98 62 88 25240 2.4 1200 120 106 65 27260 2.6 1280 128 115 68 30280 2.8 1380 138 122 70 32300 3.0 1475 148 130 74 34320 3.2 1530 153 136 89 36340 3.4 1630 163 142 95 39360 3.6 1730 173 150 100 41380 3.8 1850 185 160 106 43400 4.0 1950 195 170 112 46420 4.2 2050 205 180 118 48440 4.4 2160 216 188 124 50460 4.6 2270 227 200 130 52480 4.8 2380 238 210 137 54500 5.0 2480 248 218 143 58550 5.5 2660 266 230 153 64600 6.0 2900 290 250 170 68700 7.0 3380 338 295 194 76800 8.0 3880 388 340 223900 9.0 4300 430 365 2471000 10.0 4600 460 390 2641100 11 5200 520 445 2991200 12 5620 562 480 3231300 13 6100 610 520 3501400 14 6480 648 550 3721500 15 7000 700 595 4001600 16 7500 750 635 4301700 17 8000 800 680 4601800 18 8500 850 720 4901900 19 9000 900 760 5202000 20 9400 940 800 5402100 21 9850 985 835 5652200 22 10300 1030 875 5922300 23 10750 1075 910 6172400 24 11200 1120 950 6452500 25 11600 1160 985 6763000 30 14500 1450 1230 8333500 35 16500 1650 1400 9504000 40 18500 1850 1570 10604500 45 21000 2100 1780 11755000 50 23500 2350 13505500 55 26000 2600 14956000 60 28000 2800 16056500 65 30000 3000 17207000 70 32500 3250 18707500 75 35000 3500 20108000 80 37000 3700 21208500 85 39500 3950 22709000 90 41000 4100 23609500 95 43000 4350 247010000 100 46500 4650 267015000 150 69400 694020000 200 92500 925030000 300 138600 1386040000 400 185000 1850050000 500 231000 2310060000 600 277500 2775070000 700 323500 3235080000 800 370000 3700090000 900 415500 41550100000 1000 462000 46200125000 1250 578000 57800150000 1500 694000 69400175000 1750 810000 81000200000 2000 925000 92500

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Notes

Nothing contained within this brochure is intended to extend any warranty or representation, expressed or implied, regarding the products described herein. Any such warranties or other items or conditionsof sale of products shall be in accordance with Ingersoll-Rand ' s standard terms and conditions of sale for such products, which are available upon request. Product improvement is a continuing goal at Ingersoll-Ra nd. Designs and specifications are subject to change without notice or obligation.

Distributed by :

UK & IrelandIngersoll-Rand Sales Company Ltd. Productivity SolutionsHindley GreenWiganLancashireWN2 4EZEnglandTel: +44 (0)1942 257171Fax: +44 (0)1942 503451

France & BeneluxIngersoll RandProductivity SolutionsZ.I. du Chêne Sorcier78346 Les Clayes sous Bois

Fax: +33 (0)1 30 07 69 80Tél.: +33 (0)1 30 07 68 00

Spain & PortugualIngersoll-Rand IbéricaProductivity SolutionsTierra de Barros, 228820 - CosladaMadridSpain

France

Tel: +(34) 91 6277405Fax: +(34) 91 6277406

ItalyIngersoll Rand italiana SpaStrada Provinciale Cassanese 10820060 VIGNATE, MilanoItalyPhone: +39 02 9505 6261Fax: +39 02 9536 0159

Germany & Central EuropeIngersoll-Rand GmbHProductivity SolutionsWilhelmstrasse 2045478 Mülheim / RuhrTel: +49 / (0)208 / 9994-0Fax: +49 / (0)208 / 9994-445www.ingersollrand.de

Nordic & Baltic RegionIngersoll-Rand Productivity SolutionsDrammensveien 126A0277 Oslo, NorwayTel: +47 2255 1526Fax: +47 2243 6581

Russia & CISIngersoll RandBld. 1, 32/1 Myasnitskaya Street101990 MOSCOW, RussiaPhone: +7 095 933 03 24Fax: +7 095 785 21 26

Czech / Slovak RepublicIngersoll-Rand technical & ServicesOstrovskeho 34151 28 PRAGUE, Czech RepublicPhone: +420 2 57 109 756Fax: +420 2 57 109 758

PolandIngersoll RandNowiniarska 1 ap.1PL 00-235 WARSAW, PolandPhone: +48 22 635 72 45Fax: +48 22 635 73 32

Southern AfricaIngersoll-Rand Company SAPO Box 123720Alrode 1451South AfricaTel: +27 11 864 3930Fax: +27 11 864 3954

© 2006 Ingersoll-Rand Company - Form E52007 - CPN 00707315

www.irtools.com/aro

Con

cept

ion/

Réa

lisat

ion/

Impr

essi

on :

NP

C C

omm

unic

atio

n (C

B)

01 3

0 41

95

63

ingersoll rand/aro piston pumps -...

Documents