ingersoll rand automation - hamamcıoğlu … rand automation air system controller (asc) this...
TRANSCRIPT
Ingersoll Rand AutomationAir System Controller (ASC)
This document contains confidential and trade secret information, is the property of Ingersoll Rand Company, and is given to the receiver in confidence. The receiver by reception and retentionof the document accepts the document in confidence and agrees that, except as authorized in writing by Ingersoll Rand Company, it will (1) not use the document or any copy thereof or theconfidential or trade secret information therein; (2) not copy the document; (3) not disclose to others either the document or the confidential or trade secret information therein; and (4) uponcompletion of the need to retain the document, or upon demand, return the document, all copies thereof, and all material copied therefrom.
TF-3
2 Air System Controller
Air System Controller (ASC)The Air System Controller (ASC) is a system automation product developed specifically for complex compressed air systems.
ASC can integrate with virtually all equipment and instrumentation found in most air systems throughout a broad range of
industries. The ASC acquires and displays the necessary data to provide health monitoring and energy management, allowing
the program to control and optimize your compressed air system.
Features & Functionality• Integration of the complete compressed air system
• Energy management through base load and trim sequencing and/or load sharing; ASC controls
the number of operating compressors, matching best efficiency with dynamic system demand
• Time-based scheduling tool that enables virtually unlimited sequence change and compressor set
operational combinations.
• Graphical interface – summary, setup and equipment-specific screen sets as well as object-
oriented graphics and dynamic icons made to represent the integrated system
• Remote monitoring and communications – monitor from anywhere at any time and get real time data!
Check equipment status, make setpoint changes and even turn equipment on or off
• Information management through report generator and an alarm/trip and event log with
date, time and user stamp
• Optional advanced logic tool that features field-configurable control actions based on actual system events
• Optional remote notification of equipment alarm or shutdown allows a faster response time
for correction to avoid air upsets
• Full system support – instruction manuals and drawings as well as onsite or factory training available
Examples of system status screen and machine operating data screen
Example of optional advanced scheduling tab
3Air System Controller
ASC Master PC Requirements
Ingersoll Rand specifies that your ASC Server PC utilize the following hardware and software as a minimum:
• Pentium 4 - 2.8 GHz processor
• 1 GB DDR
• 40 GB free hard drive space - Ingersoll Rand recommends 80 GB hard drive
• Microsoft Windows 2003 Server STANDARD EDITION (Multi-Language for non-English applications)
• Windows Internet Explorer Version 6.0 or later
• CD-R/W drive
• TCP/IP compatible network interface card - 100 Mbps
(2nd network interface card required if connecting to local LAN)
• 17" or larger monitor with 1024x768 resolution
• 104 key, alphanumeric keyboard
• 2-Button mouse
Production RouterOperations
CustomerNetwork
Ingersoll RandASC Network
TCP/IP
ASC Server
Remote User
Internet
Firewall
Home User
Maintenance
ControlRoom
Modbus
Modbus
Modbus toEthernet Bridge
Modbus toEthernet Bridge
CMC
CMC
I/O Box
I/O Box
UCM
UCM
UCM
UCM
SE
SG
IRI
IRI
System Control Using ASCRemote Supervisory Control (from ASC Server)
• Remote compressor control with Ingersoll Rand controllers
• Remote access as if user was at the local panel
(Local panel must be in remote/network mode)
• Start/stop
• Load/unload
• Reset
• Change set points
Compressor Sequencing
• Compressors may be ordered in any sequence within the system the ASC operates
• Schedule sequence changes with the powerful scheduler tool
• Equalize running hours on sequenced compressors
System Scheduler
• Change system settings on a set, regular schedule
• Schedule start/stop/load/unload based on known events
• Schedule control for compressors as well as auxiliary equipment
Auxiliary Equipment (Dryers, Cooling Towers, Water Pumps, Etc.)
• Manual remote control
• Starting and stopping based upon compressor operation (one-to-one relationship)
• Change set points
• Schedule control based on known events
Load Management for Centrifugal Compressors
• Load sharing and anti-blowoff control
• Maximize available throttle range of each compressor
• Monitor and continuously adjust inlet and bypass valve position
• Distribute the load more equally
• Reduce wasted air
• More efficient operation of system
4 Air System Controller
Inge
rsol
l R
and