infusion disposables:iv disposables · transparent drip chamber, with light protecting, relocatable...

M E D I C A L D E V I C E S

PRODUCT RANGE OVERVIEW

Infusion Disposables


Needle Free Product Range

Single Valve.............................................1

Gravity Sets.............................................1

Extension Sets .........................................1

Transfusion Set........................................1

Burette Set..............................................1

Infusion Sets

Infudrop Air matic...................................2

Infudrop Air ............................................3

Infudrop Air 21 .......................................4

Infudrop Air-Nitro....................................5

Frekadrop................................................6

Connection System .................................7

CVP Measurement

Medidrop................................................8

Transfusion Sets

Sangodrop ..............................................9

Extensions & Connectors

Heidelberger Extensions ........................10

Injectomat Lines ....................................11

Extensions .......................................12 –13

Stopcocks and Manifolds

Stopcock Systems..................................14

Manifold Stopcock Systems...................15

Set Combinations..................................16

Spikes & Transfer Cannulas

Extra-Spike ......................................17–18

Transfer Device......................................19

Transfer-Adapter ...................................20

Caps and Valves

Caps .....................................................21

Back Check Valves ................................22

Fluid & Ventilation Filters

Infufil ..............................................23–24

Ventilation Filter ....................................25

Infusion Disposables:IV Disposables 30.10.2008 10:00 Uhr Seite 30

1

K-NECT, Needle free product range


Needle free product range

Product Info

Needle free product range.

Features of K-NECT valves

● Flat and smooth top

● Transparent housing

● Lipid resistant

● MRI compatible

● Compatible with chemotherapeutics

● Applicable to blood products

● Fits with Luer lock and Luer slip

K-NECTType Length DEHP free Packaging Art. No.

Single Valve K-NECT, Needle free injection connector – ● 200 M79400345

Gravity Sets Infudrop Air 21 K-NECT, Y, LLM 180 cm ● 100 M48413545

Infudrop Air 21 K-NECT, 2Y, BCV, LLM 180 cm ● 100 M48413645

Extension Sets Extension K-NECT, micro bore 10 cm ● 200 M78401045

Extension K-NECT, Y, LLM 25 cm ● 100 M77401845

Extension 2-fold, K-NECT, LLM 20 cm ● 100 M76400245

Extension 3-fold, K-NECT, BCV, LLM 20 cm ● 100 M76400345

Transfusion Set Sangodrop B 200 m, K-NECT, LLM 180 cm – 100 M61413545

Burette Set Universal Burette 150 ml, K-NECT – ● 10 M63013645

Infusion set coding

P = Pressure; for gravity and pressurized applications

G = Gravity; only for gravity applications

RS/ = Back Check Valve; prevents any back flow into the infusion

BCV set, mandatory for combinations of gravity and pumpedinfusions

DWH = Integrated Stopcock System

Y = Integrated Y injection port

Y = Integrated Y injection port with needle free valve

LLM = Luer lock mobile/rotating Luer lock


3Infusion Disposables

Infusions Sets

2

Infudrop Air matic


Infusions Sets

Product Info

Infusion set with safety-air-vent.

Features

● Piercing spike, micro smooth according to ISO standard

● Integrated, closable air-vent with hydrophobic bacterial filter

● Safety-air-vent valve which protects the air filteragainst contact with infusion solution

● The valve/filter combination facilitates venting especially for the application of lipid- and alcohol-containing solution

● Transparent drip chamber

● 15 μm fluid filter according to ISO 8536 standard

● Drip chamber free of PVC

● Precision-V-Roller clamp

● Flexible, transparent tubing

● Peel-packaging

Infudrop Air

Type Length DEHP/PVC free Roller clamp Injection port Back Check Valve Packaging Art. No.

M-G 150 cm – white ● – 100 2886222

M-G 150 cm DEHP free white ● – 100 2886412

M-P 150 cm – orange – – 100 2886372

M-P 175 cm – orange – – 100 2886362

M-P 230 cm – orange – – 100 2886382

M-P 175 cm DEHP free orange – – 100 2886402

M-P 150 cm PVC free orange – – 100 2886462

M-P 240 cm PVC free orange – – 100 2886472

M-P RS 175 cm – orange – ● 100 2886392

M-P RS-DWH+10 cm 175 cm – orange Stopcock System ● 100 2886512

Infudrop Air

Product Info

Infusion set with closable air-vent.

Features


● Integrated, closable air-vent with hydrophobic + oleophobic PTFE-Filter






● Peel-packaging

Infudrop Air maticType Length Roller clamp Injection port Back Check Valve Packaging Art. No.

G 150 cm white ● – 100 2886212

P 175 cm orange – – 100 2886312

P 200 cm orange – – 100 2886262

P 240 cm orange – – 100 2886231

P-RS 175 cm orange – ● 100 2886342

P-RS 240 cm orange – ● 100 2886331

automatic P 175 cm orange – – 100 2886322

RS-DWH 175 cm orange Stopcock System ● 100 2886812

PY 175 cm orange Y-port – 100 2887012

safety-air-vent



Infusions Sets


Infusions Sets

Infudrop Air 21

Infudrop Air-Nitro

Type DEHP/PVC free Length Roller clamp Filter Back Check Valve Packaging Art. No.

G light-protected DEHP free 150 cm white – – 50 2886422

G light-protected PVC free 195 cm white 0,22 μm/10 cm2 ● 25 2886452

P light-protected DEHP free 175 cm orange – – 50 2886432

Infudrop Air-Nitro

Product Info

Infusion set with closable air-vent.

Features


● Integrated, closable air-vent with hydrophobic bacterial filter






● Peel-packaging

Infudrop Air 21

Type Length Roller clamp Rotating Luer lock Injection port Stopcock System Back Check Valve Packaging Art. No.

G LL 150 cm white – ● – – 100 2886232

G Luer 150 cm white – ● – – 100 2886242

P 175 cm orange – – – – 100 2886532

P 230 cm orange – – – – 100 2886542

P-RS 175 cm orange – – – ● 100 2886552

P LLM 180 cm orange ● – – – 100 2886572

P-Y LLM 190 cm orange ● ● – – 100 2886562

P 3V LLM 190 cm orange ● – ● – 100 2886582

P-Y 3V LLM 220 cm orange ● ● ● – 100 2886592

Product Info

Infusion set with automatic or manual air-vent forinfusion of light sensitive/PVC incompatible drugs.

Features


● Integrated, closable air-vent with hydrophobic +oleophobic bacterial filter

● Transparent drip chamber, with light protecting, relocatable shield


● PVC free or DEHP free PVC


● Flexible, light-protecting tubing

● Peel-packaging



Infusions Sets

Frekadrop

Connection System

Type Length Packaging Art. No.

2-fold 30 cm 100 2879012

4-fold 30 cm 100 2879022

Connection System


Infusions Sets

6

Product Info

Connection system to connect various infusion bottles for simultaneous infusion for application ofbigger volumes without having to change bottles.

Features

● Ergonomic withdrawal cannula with slim-lined spikefor smooth piercing and closable air-vent

● Tube length 30 cm

● Peel-packaging

Product Info

Complete infusion set with precision flow controlfor gravity infusions.

Features

● Piercing spike, micro smooth according to ISO 8536 standard




● Slide clamp or Robson clamp for interruption of infusion

● Precision flow controller adjustable from 15–300 ml/h

● Fluid level to be set 50–80 cm above patient’s level

● With flexible injection-piece

● Luer lock-fitting

● Peel-packaging

● Also available without infusion set

Frekadrop

Type Length PVC free Light protection Rate range Packaging Art. No.

M-G 150 cm – – 15–300 ml/h 50 2888512

M-G 210 cm ● – 15–300 ml/h 50 2888532

M-G, white 150 cm – ● 15–300 ml/h 50 2888542

Infusion flow control 65 cm – – 15–300 ml/h 50 2888522



CVP Measurement

Medidrop

Sangodrop

Type Length Filter Spike Injection port Rotating Luer lock Packaging Art. No.

B 150 cm 200 μm/10 cm2 plastic ● – 100 2900012

B 150 cm 200 μm/10 cm2 plastic without silicone ● – 100 2900022

B 150 cm 200 μm/10 cm2 plastic – – 100 2900032

B LLM 175 cm 200 μm/10 cm2 plastic – ● 100 2901202

B 3V LLM 175 cm 200 μm/10 cm2 plastic Stopcock System ● 100 2901212

B filter-inline 175 cm 40 μm/16 cm2 plastic – – 100 2900042

B filter-inline 175 cm 200 μm/20 cm2 plastic ● – 100 2900052

B filter-inline, DEHP free 175 cm 200 μm/32 cm2 plastic ● – 50 2900062

Air matic 150 cm 200 μm/10 cm2 plastic ● – 100 2900072

S G, Luer 150 cm 200 μm/10 cm2 steel tip ● – 100 2900092

S P, LL 150 cm 200 μm/10 cm2 steel tip – – 100 2900082


Transfusion Sets

Sangodrop

Product Info

Transfusion sets.

Features

● Sangodrop B: piercing spike for blood bags

● Sangodrop S: piercing spike with steel tip for glass- and vacuum bottles

● Sangodrop Air Matic: integrated, closable air-vent with hydrophobic bacterial filter and safety-air-ventvalve which protects the air filter against contact with infusion solution




● Luer lock-fitting according to ISO 594

● Peel-packaging

Product Info

Central vein pressure measurement set with andwithout infusion set.

Features



● Transparent, PVC free drip chamber

● 15 μm fluid filter according to ISO standard



● Measurement arm length 150 cm

● Measurement to patient 90 cm

● Luer lock-fitting according to ISO 594

● Stopcock System

● Peel-packaging

Medidrop central vein pressure set

Type Length Roller clamp Packaging Art. No.

with infusion set 150 cm/90 cm white 50 2886712

without infusion set 150 cm/90 cm – 100 2886722




Heidelberger Extensions

Injectomat Line

Type Length Tubing Material Light protection Packaging Art. No.

50 cm 1.0/2.0 mm PE – 200 9004112

100 cm 1.0/2.0 mm PE – 200 9004122

150 cm 1.0/2.0 mm PE – 200 9004132

200 cm 1.0/2.0 mm PE – 200 9004142

250 cm 1.0/2.0 mm PE – 200 9004152

300 cm 1.0/2.0 mm PE – 200 9004162

150 cm 1.0/2.0 mm PE yellow 200 9004172

200 cm 1.0/2.0 mm PE yellow 200 9004182

150 cm 1.0/2.0 mm PE black 200 9004192

200 cm 1.0/2.0 mm PE black 200 9014102

150 cm 1.5/2.7 mm PVC – 200 9004242

200 cm 1.5/2.7 mm PVC – 200 9014342

250 cm 1.5/2.7 mm PVC – 200 9004442

300 cm 1.5/2.7 mm PVC – 200 2888572

150 cm 1.5/2.7 mm DEHP free yellow 100 9004212

200 cm 1.5/2.7 mm DEHP free yellow 100 9004222

with Back Check Valve 150 cm 1.5/2.7 mm PVC – 200 2888582

with Back Check Valve 200 cm 1.5/2.7 mm PVC – 200 2888592

with Back Check Valve 150 cm 1.5/2.7 mm PE – 200 9004312



Injectomat Lines

Product Info

Infusion line for syringe pumps, for intravenous and intraarterial infusions.

Features

● Thin lumen tube

● Luer lock-safety-connection

● To use with standard syringe pumps

● Light-protection: yellow, filters wave lengths of light:200–400 nm, although transparent, phase boundaryis visible! black, filters wave lengths of light: 200–900 nm – not transparent!

Product Info

For extension of infusion and transfusion lines.

Features

● High transparency tube

● Pressure-resistant

● Safety by Luer lock-fitting

● Peel-packaging

● Inner diameter 3.0 mm

Heidelberger Extension

Type Length Tubing DEHP free Flow stop cap Light protection Packaging Art. No.

30 cm 3.0/4.1 mm – – – 200 2873112

75 cm 3.0/4.1 mm – – – 200 2873122

100 cm 3.0/4.1 mm – – – 200 2873142

140 cm 3.0/4.1 mm – – – 100 2873212

190 cm 3.0/4.1 mm – – – 100 2873302

75 cm 3.0/4.1 mm ● – – 200 2873132

140 cm 3.0/4.1 mm ● – – 100 2873222

140 cm 3.0/4.1 mm ● – yellow 100 2873232

with Stopcock System 150 cm 3.0/4.1 mm – – – 200 2888562

with LLM 30 cm 3.0/4.1 mm ● ● – 200 2873114

with LLM 75 cm 3.0/4.1 mm ● ● – 200 2873124

with LLM 100 cm 3.0/4.1 mm ● ● – 200 2873144

with LLM 140 cm 3.0/4.1 mm ● ● – 200 2873214

with LLM 190 cm 3.0/4.1 mm ● ● – 200 2873305


13

Extensions



Extension

Type Roller clamp Injection port Packaging Art. No.

2-fold, LL – – 200 2873512

4-fold, LL white – 100 2873612

2-fold, 100 cm, LL orange – 100 2888552

5-fold, with Inj. Cap, LL white ● 100 2873712



Extensions

Product Info

Infusion multi-way-connector for simultaneous infusion.

Features

● Luer lock-connectors according to ISO 594

● Optimum fluid flow

● 5 way connector with injection port

● Peel-packaging

Product Info

For extension of infusion and transfusion sets with the opportunity of intermittent injections with cannula.

Features

● For use under pressure conditions, too

● With pressure-resistant injection port

● Luer lock-connectors

● Peel-packaging

Extension

Type Length Tubing Injection port Packaging Art. No.

with injection port 18 cm 3.0/4.1 mm Latex free 100 2873152



Stopcocks & Manifolds

15

Stopcock Systems



Product Info

Variable Stopcock System, to be used during simultaneous infusion therapy.

Features

● Rotary for 360°

● 3 Luer lock-fittings

● Product and packaging PVC free

● Polysulphone material – higher resistance againstsolutions containing lipids or alcohol

Manifold Stopcock SystemType Length Colour Material* Packaging Art. No.

3-fold – multiple PSU 50 8501802

3-fold 140 cm multiple PSU 50 8501892


5-fold – multiple PSU 50 8501842



3-2-1-fold with filter 0,2 μm 175 cm multiple PSU 25 8501902

5-2-1-fold with filter 0,2 μm 175 cm multiple PSU 25 8501862

Fixture – white – 25 8501852*PSU = Polysulfone

Manifold Stopcock Systems

Product Info

Variable manifold stopcock system for infusion therapy.

Features

● Ergonomic design with 3 or 5 integrated stopcocks

● With and without extension tubing

● Encoded to colours

● Rotary for 360°

● Polysulphone material – higher resistance against solu-tions containing lipids or alcohol

Stopcock Systems

Type Colour Material* Kink-resistant Length Tubing Packaging Art. No.

blue PC – – – 100 8501712

blue PSU – – – 100 8501722

red PC – – – 100 8501732

red PSU – – – 100 8501742

white PC – – – 100 8501752

white PSU – – – 100 8501762

white PC – 10 cm 1.5/2.7 mm 200 8501772

blue PC – 10 cm 1.5/2.7 mm 200 8501782

blue PC ● 10 cm 2.0/4.2 mm 200 8501792*PC = Polycarbonate, PSU = Polysulfone





Spikes & Tansfer Cannulas

Set Combinations

Product Info

Withdrawal spike for multiple withdrawal frommulti-dose vials and for extraction and dispensingdiluents or additives, safe and easy to use.

Features

● Slim, short spike for easy piercing of all kind of rubber stoppers

● Easy opening and closing with one hand, integrated, tight snap with colour code

● Easy withdrawal and dispensing diluents or additives reliable protection against microbial contamination by integrated airvent filter

● Luer lock-connector

● Product and packaging PVC free, Latex free

Extra-Spike Chemo Plus: Reliable handling of cyto-statics by protection against toxic aerosols when dissol-ving dry substances by integrated 0.2 μm air-vent filter.

Extra-Spike

Type Colour Particles filter Air vent filter Packaging Art. No.

Plus green – 3.0 μm 400 2902802

Plus 5 μm blue 5 μm 3.0 μm 400 2902812

Plus 5 μm KP light-blue 5 μm 3.0 μm 400 2902817

Chemo Plus red 5 μm 0.2 μm 400 2902822

Extra-Spike

Product Info

TIVA: Infudrop Air matic P infusion set with 2 integrated Stopcock Systems.

Features

● 2 Back Check Valves, 2 PE syringe pump extension linesand patient adapter

Set Combinations

Type No. of Stopcocks Colour Material Length Filter Packaging Art. No.

TIVA-Drop Air matic P 2 blue/white Polysulfone 175 cm – 60 8590982


18

Extra-Spike


Spikes &Transfer Cannulas

Product Info

Withdrawal cannula for multiple withdrawal from bottles.

Features

● Integrated air-vent

● Hydrophobic bacterial filter

● Slim, short piercing spike

● Luer lock-connection


Chemo variants: Hydrophobic, non-fibrous 0.2 μm filter protects against toxic aerosols and guarantees steady pressure balance

Product Info

Spike to transfer sterile liquids in closed systembetween rubber stopper containers.

Features

● Deep-drawn fluid openings

● Slim-lined piercing spike with protection cap

● Handy formed dial disk

● Minimum residual volume




Transfer Device

Type Packaging Art. No.

400 8500432

KP 400 8500437

19

Transfer Device

Extra–Spike

Type For small Minimal Air vent filter Packaging Art. No.vials residual volume

Air – – ● 400 2902832

Air steel cannula ● ● ● 400 2902842

Steel cannula ● ● – 400 2902852

Chemo Air – – 0.2 μm 50 2902862

Chemo Air steel cannula ● – 0.2 μm 50 2902872

Air Steel cannula

Chemo AirChemo Airsteel cannula

Air steel cannula


20

Transfer-Adapter



Product Info

Adapter to transfer sterile liquids in KabiPacor Freeflex containers.

Features

● Adapters especially desgin to fit on KabiPac orFreeflex container

● Steel spike to pierce into the container

● Slim-lined plastic spike for bottle/vial

● Minimum residual volume



Caps and Valves

Transfer Adapter


KabiPac 100 2870091

Freeflex 200 2870081

21

Caps

Caps

Type Colour Packaging Art. No.

1. Combination Cap LL blue 2000 8501532

1. Combination Cap LL red 2000 8501512

1. Combination Cap LL orange 2000 8501522

1. Combination Cap LL yellow 2000 8501542

1. Combination Cap LL white 2000 8501552

2. Injection Cap yellow 2000 8501502

3. Closing Cap LL yellow 2000 8502812

4. Closing Cap Luer yellow 2000 8502822

5. Protective Cap red 1000 831042420

5. Freeflex Cap red 50 2870071

1. Combination Cap LLUniversal useable closing cap with double function without injection site.

Features

● Luer lock male and Luer lock female closures onone device

2. Injection CapSafety closing cap with injection site.

Features

● With flexible Latex free membrane for intermit-tent injection of medicine

● Sunk Luer lock male connector

1. 2.

3. 4. 5.

3. Closing CapSafety closing cap without injection site.

Features

● Luer lock male fitting

4. Closing CapClosing cap without injection site.

Features

● Male/female Luer slip

5. Port CapClosing cap for ports.

Features

● Fitting to all port of Fresenius Kabi´s containers



Filter

Back Check Valves

Back Check ValveBack Check Valve for parallel infusions.

Features

● One way infusion valve● Luer lock positive/Luer lock negative


Caps and Valves

Back Check Valves


Back Check Valve 1000 8502802

Back Check Valve with protection cap 200 8502852

Fluid Filter

Product Info

Hydrophilic liquid filter vented.

Features

● Position-independent air separation

● Max. operating pressure 2 bar

● Luer lock-negative/positive-adapter

● Back Check Valve integrated in the male luer lock adapter

● Latex free, DEHP free

● Peel-packaging

Infufil

Type Filter Filter membrane Flow rate Back Check Valve Operating Packaging Art. No.time

0,2 μm Plus 0.2 μm/ pos. Charged Supor® ≥ 25,0 ml/min ● – 100 290950210 cm2 Membrane for effective

particle retention

0,2 μm 0.2 μm/ PES ≥ 20,0 ml/min ● 96 h 50 290960212 cm2


24

Fluid Filter


Filter

Product Info

Hydrophilic non-fibrous liquid filter.

Features

● Product and peel-packaging PVC free, Latex free


Filter

Infufil

Type Diameter Operating pressure Packaging Art. No.

0.2 μm, 5.7 cm2 30 mm 7.0 bar 200 2909702

5 μm, 4.6 cm2 29 mm 4.0 bar 200 2909802

Ventilation Filter

Product Info

Hydrophobic non-fibrous ventilation filter.

Features

● Product and peel-packaging PVC free, Latex free

● Option: slim steel cannula G19; 1.1 x 30 mm to penetrate even stronger plugs without any problem

Ventilation Filter

Type Filter Diameter Operating pressure Cannula Packaging Art. No.

LL 0.2 μm/4.0 cm2 23 mm 1.0 bar – 200 2909112

LL steel cannula 0.2 μm/4.0 cm2 23 mm 1.0 bar G19, 160 85004421.1x30 mm


Fresenius Kabi Deutschland GmbH

Else-Kröner-Str. 1

61352 Bad Homburg v.d.H.

Germany

Phone: +49 (0)61 72-686-82 00

Fax: +49 (0)61 72-686-82 39 7353

911/

3 (1

0/08

AC

)

infusion disposables:iv disposables · transparent drip chamber, with light protecting, relocatable...

Documents