information & communications technology network … · 2020-06-17 · network infrastructure...
TRANSCRIPT
Network Infrastructure
V1.5 appendix E Ordering.doc Page 1
Information & Communications Technology Network Infrastructure Group
Network Infrastructure Standards January 2018
Appendix E - Ordering
Version 1.5
Network Infrastructure
V1.5 appendix E Ordering.doc Page 2
Appendix E - Ordering This Appendix is just a guide and will be updated whenever possible. Please contact your suppliers for up-to-date information and for more information.
Passive equipment CAT5e
Brand
Brand Rex
Designation Part code
GigaPlus U/UTP 100 ½ 4x2xAWG 24/1 (GPU-HF3) GPU-HF3-500BU
Note: Any other necessary products please contact Brand-Rex or the usual supplier of Brand-Rex Products
Part code Packaging
305m reelebox
CAT6A
Brand
Brand Rex
Designation Part code
GigaPlus CAT6A F/FTP, 100 , 4x2xAWG 23/1 AC6F/FTP-HF3-500BU
Note: Any other necessary products please contact Brand-Rex or the usual supplier of Brand-Rex Products
Part code
Network Infrastructure
V1.5 appendix E Ordering.doc Page 3
Packaging
500m reelebox
Copper backbone
Brand
Brand Rex
Designation Part code
24 AWG U/UTP MultiPair Sheathed Cable
- 50 pairs C3U050PRHF1 - 100 pairs C3U100PRHF1
Note: Any other necessary products please contact Brand-Rex or the usual supplier of Brand-Rex Products
Packaging
305m reelebox
Fibre
Brand
Brand Rex
Designation Part code
Network Infrastructure
V1.5 appendix E Ordering.doc Page 4
Millennium Optical Cables - Universal PDS
- 16 Fibre HF 008 C16 LU - 24 fibre HF 008 C24 LU
Note: Any other necessary products please contact Brand-Rex or the usual supplier of Brand-Rex Products
Packaging
305m reelebox
Brand
Brand Rex
Designation Part code
Air Blown Microcable Products
- Blown Microducts
4 Way Microduct (10mm) 21-0411-02 4 Way Microduct (12mm) 21-0412-02
7 way Microduct (10mm) 21-0711-02 7 way Microduct (12mm)
12 way Microduct (10mm) 21-1211-02 12 way Microduct (12mm) 21-1212-02
Note: Any other necessary products please contact Brand-Rex or the usual supplier of Brand-Rex Products. Other products of the same range exist and may be considered as well.
Packaging
Network Infrastructure
V1.5 appendix E Ordering.doc Page 5
Brand
Brand Rex
Designation Part code
Air Blown Microcable Products
- Blown Microcables
Microblo 12-72 Fibre Blown Micro Cable
24 fibre HF008BMC24WNM6 36 fibre HF008BMC36WNM6 48 fibre HF008BMC48WNM6 60 fibre HF008BMC60WNM6 72 fibre HF008BMC72WNM6
Microblo 96 Fibre Blown Micro Cable
84 fibre HF008BMC84WNM8 96 fibre HF008BMC96WNM8
Note: Any other necessary products please contact Brand-Rex or the usual supplier of Brand-Rex Products. Other products of the same range exist and may be considered as well.
Packaging
Drum
Network Infrastructure
V1.5 appendix E Ordering.doc Page 6
Brand
Brand Rex
Designation Part code
Fibre panel
24 way FC SM Compact Plus Panel (Black) MFCCISXSM24FC2
Note: Any other necessary products please contact Brand-Rex or the usual supplier of Brand-Rex Products
Cabinets
Brand
Several
Designation Part code
Cooper B-Line
Access rack
Network Infrastructure
V1.5 appendix E Ordering.doc Page 7
Flat V / Angled installations (RCM)
Part Number : ACP0000237
ACCESS with the following configuration:
Rack Height 42 Unit
Rack Width 800 Wide
Rack Depth 875 Deep
Base Options Jacking Feet & Castors - (H)
Rail Type 19" Rails (2 Pairs - RCM front - STD rear)
- Front Rails STD - 128mm from front face
(RCM Fingers will protrude front frame)
- Rear Rails - 70mm from rear face
Front Door No Door
Rear Door No Door
Side Panels No Side Panels
Top Panel Front Option No Panel
Top Panel Middle Option No Panel
Top Panel Rear Option No Panel
-
Network Infrastructure
V1.5 appendix E Ordering.doc Page 8
40 x TLCMS and 40 X TLCMEF fitted front only - evenly
distributed
RCM Fingers fitted front only
Supply with BTK loose
1 x Earth Kit
2 x ABS4230 Fitted each side, Fitted to offset rear
(front edge in line with center extrusions)
2 Pair Unit Height Labels (Bottom to Top) - Fit front/Rear
-
Rack Colour Grey with Blue Trim
Flat V installation ACP0000237
Standard installation ACP0000238
CAT6A installation (high density) ACP0000340
Retrofitting management on Flat V installations
Panduit
Horizontal management fingers CMBRC5E
http://tinyurl.com/yfljfq4
CMS
Horizontal cable management – 1U 5 ring CTB05PRB
Ordering Part code
Cooper B-Line, Panduit & CMS
Brand
Corning
Designation Part code
Optical Distribution Frame (ODF) – Centrix
CTX-FA-CAB-2209PGRAB
Network Infrastructure
V1.5 appendix E Ordering.doc Page 9
Centrix™ Front Access Cabinet, H2200 x W900 x D300, right cable entry, walls, door with acrylic glass window, bottom channel function, assembled
Note: Any other necessary products please contact ICT. These are to be installed in every Intake Room and Main Comms room. Also note that it will be important to check which side the cable entry will be from if more than one is to be installed and depending on fibre entry point.
http://csmedia.corning.com/opcomm/Resource_Documents/spec_sheets_rl/foh/CTX-CAB-F2209PGRAB_EMEA_BEN.pdf
Network Infrastructure
V1.5 appendix E Ordering.doc Page 10
Accessories
Spliced Fibre Centrix™ Unit, 4U, 12 Cassettes each with 24 LC UPC adapters & SM pigtails, 250 µm standard SM pigtails, total of 288 F
http://catalog.corning.com/opcomm/en-GB/catalog/ProductDetails.aspx?cid=centrix_hardware_web&pid=122941&vid=122946&rot=
CX4U8P24-A9-2RH000
Fibre lead EDGE™ Solutions Low-loss Patchcord, LC duplex uniboot connectors, SMF-28® Ultra OS2, standard reverse fibre polarity, LSZH/FRNC jacket, yellow, 4 m Note: for inter-ODF cabinet connection get the 7m patch lead, for single ODF cabinet connection get the 4m patch lead and for the distribution and router cabinet(s). The number highlighted in red denotes length
http://csmedia.corning.com/opcomm/Resource_Documents/spec_sheets_rl/fo_cab/E787802GNZ20004M_CALA_AEN.pdf
E787802GNZ20004M
MTP to LC Presentation Centrix™ standard access 4RU mounted HSG empty Centrix™ Mod 24 LC/UPC-2MTP PRT FRNT RGT (each has
CTX-S4U, CTX24A9-892RRR
Network Infrastructure
V1.5 appendix E Ordering.doc Page 11
2 MTP connectors and 12 duplex LC)
http://catalog.corning.com/opcomm/en-GB/catalog/ProductDetails.aspx?pid=122915&vid=122916&cid=&productid=122915 http://catalog.corning.com/opcomm/en-GB/catalog/ProductDetails.aspx?pid=143255&vid=143259&cid=&productid=143255
MTP Presentation EDGE™ Housing, 1 rack unit, holds up to 12 EDGE modules or panels
http://catalog.corning.com/opcomm/en-GB/catalog/ProductDetails.aspx?cid=edge_housings_web&pid=130469&vid=130486&rot= EDGE™ AO Panel, 72 F, Single-mode (OS2)
EDGE-01U-SP, EDGE-CP72-U1, ECM-UM12-04-89G
Network Infrastructure
V1.5 appendix E Ordering.doc Page 12
http://catalog.corning.com/opcomm/en-GB/catalog/ProductDetails.aspx?cid=edge_panels_web&pid=131348&vid=120048&rot= EDGE™ Module, 12 F, LC Duplex to MTP® Connector, Bend-improved Single-mode (OS2)
http://catalog.corning.com/opcomm/en-GB/catalog/ProductDetails.aspx?cid=edge_modules_web&pid=33065&vid=33271&rot=
MTP Trunks EDGE™ Solutions Trunk Cable, SMF-28® Ultra OS2, MTP® to MTP, 144 fibres Note: Check fibre core requirements prior to purchasing. The numbers highlighted in red denote fibre core numbers and length
G9090144GLZ88U010M
MTP Harness EDGE™ Solutions Harness, SMF-28® Ultra OS2, 12 fibres,
H897812GLZ-4A1.65M
Network Infrastructure
V1.5 appendix E Ordering.doc Page 13
MTP® to 6 LC Duplex Uniboot Connectors, Universal LC 150mm stagger, 1.65 m Note: Check stagger and length prior to purchasing.
Comms Cabinet fibre termination Closet Connector Housing (CCH), one rack unit, holds two CCH connector panels
http://catalog.corning.com/opcomm/en-US/catalog/ProductDetails.aspx?pid=77702&vid=77703&cid=&productid=77702 CCH Splice Module with Pigtails, 24 F, LC UPC duplex shuttered, single-mode (OS2)
CCH-01U, CCH-CS24-AE-P00RE
Network Infrastructure
V1.5 appendix E Ordering.doc Page 14
http://catalog.corning.com/opcomm/en-GB/catalog/ProductDetails.aspx?cid=&pid=95363&vid=116918
Accessories Fibre Optic Cleaning Tool used to clean MTP® connector end faces as well as MTP Connectors installed in a module
http://catalog.corning.com/opcomm/en-GB/catalog/ProductDetails.aspx?cid=edge_accessories_web&pid=29909&vid=110987&rot=
2104466-01
NOTE: Please bear in mind that some of the products have no part code as they depend on length and number of fibre cores and hence need to be ordered to fit the design. Unfortunately, we cannot provide a “one size fits all” information in this document for these products.
Network Infrastructure
V1.5 appendix E Ordering.doc Page 15
Please contact ICT if necessary.
Accessories (Voice)
Brand
Brand Rex
Designation Part code
Unshielded Panels (1U 50 port) C5CPNLU504PK2
Ordering
Brand-Rex
Accessories (Data)
Brand
Brand Rex
Designation Part code
V12 angled panel with management suitable for up to 24 snap in jacks - BLACK
MMCPNLX24SIJ2MAN
Cat5e module (black) GPCJAKU012LF
Network Infrastructure
V1.5 appendix E Ordering.doc Page 16
Cat5e Unshielded Jack (Tool-Free) GPCJAKU002
(The tool free module is an option as long as it doesn’t add any cost to the College)
Cat6A Shielded Tool-free Jack AC6JAKS000DC
Ordering
Brand-Rex
24 Port Modular Snap-in-Jack Panel - Black MMCPNLX24SIJ8M-B
Note 1: Any other necessary products please contact Brand-Rex or the usual supplier of Brand-Rex Products Note 2: The cabinets to be used will have to be fitted with specific horizontal management. Please see information on the cabinet configuration.
Brand
Brand Rex
Designation Part code
24 way Unscreened panel (1U 24 port) GPCPNLU24002 (UNIVERSAL IDC 568A/B BLACK)
Network Infrastructure
V1.5 appendix E Ordering.doc Page 17
Ordering
Brand-Rex
Brand
Brand Rex
Designation Part code
CAT6A/CAT5e module (angled for snap in jacks)
MMCANG0623
Use the appropriate jacks for CAT5e or CAT6A as per current standards
Ordering
Brand-Rex
Fire stopping (CWCs)
Brand
EZ-Path
Designation Part code
Network Infrastructure
V1.5 appendix E Ordering.doc Page 18
EZ-Path firestopping
Please see this for installation. http://www.youtube.com/watch?v=yrcZU4EhCXA http://www.youtube.com/watch?v=eSeKVQ_gWM4 http://www.youtube.com/watch?v=RUdHi7wStPk
Ordering
ICT
Patch cords
Brand
Assynia
Designation Part code
CAT5e
Booted CAT5e patch cable (0.5m) – all colours
FB5E-005
Booted CAT5e patch cable (1.0m) – all colours FB5E-010 Booted CAT5e patch cable (1.5m) – all colours FB5E-015 Booted CAT5e patch cable (2.0m) – all colours FB5E-020 Booted CAT5e patch cable (3.0m) – all colours FB5E-030 Booted CAT5e patch cable (4.0m) – grey only FB5E-040GY Booted CAT5e patch cable (5.0m) – all colours FB5E-050 Booted CAT5e patch cable (6.0m) – grey only FB5E-060GY Booted CAT5e patch cable (7.0m) – all colours FB5E-070 Booted CAT5e patch cable (10.0m) – all colours FB5E-0100
Network Infrastructure
V1.5 appendix E Ordering.doc Page 19
Booted CAT5e patch cable (15.0m) – grey only FB5E-0150GY Part code Ordering
CMS (http://www.cmsplc.com/)
Brand
Sterling
Sterling
Designation Part code
CAT6A
Booted CAT6a patch cable (1.0m) – blue C6A-PCSL-BL-010 Booted CAT6a patch cable (1.5m) – blue C6A-PCSL-BL-015 Booted CAT6a patch cable (2.0m) – blue C6A-PCSL-BL-020 Booted CAT6a patch cable (3.0m) – blue C6A-PCSL-BL-030
Booted CAT6a patch cable (1.0m) – red C6A-PCSL-RD-010 Booted CAT6a patch cable (1.5m) – red C6A-PCSL-RD-015 Booted CAT6a patch cable (2.0m) – red C6A-PCSL-RD-020 Booted CAT6a patch cable (3.0m) – red C6A-PCSL-RD-030
Part code Ordering
Containment
Brand
Sterling
Cablofil
Designation Part code
Network Infrastructure
V1.5 appendix E Ordering.doc Page 20
Cablofil steel wire cable tray
There are too many options available. These will need to address specific job/project requirements.
Part code Ordering
Legrand/Cablofil approved distributors
https://www.legrand.co.uk/products/cable-management/cablofil/
http://www.cablofil.co.uk/sites/default/files/Cablofil_low_res_0.pdf
https://www.legrand.co.uk/media/4564/cablofil_steel_wire_cable_tray.pdf
(all product guide – Use part code search to find product)
Accessories:
DEV100GS Cable Dropout Plate
CM585160
Network Infrastructure
V1.5 appendix E Ordering.doc Page 21
CLIPN Black Identification Tag Pack: 1 pk of 50 *
* Please note that there are packs with more quantities
CM559127
Cable Exit
CM350535
Conduit Clamp Kit (Bottom and side installation)
CM585410
Network Infrastructure
V1.5 appendix E Ordering.doc Page 22
RADT90 Radius Shield
CM840101 CM840111 CM840131 CM840103 CM840113 CM840133
GRIFE QUIP
CM585327
Elevation Change Hinge
Parts Required: 2x CM558403 8x CM801011 4x CM558011
Network Infrastructure
V1.5 appendix E Ordering.doc Page 23
Divider Strip
COT CM923010 CM923020 CM923030 CM923040 CM923013 CM923023 CM923033 CM923043 CM923014 CM923024 CM923044
Divider Coupler
COT J CM923050 CM923054
Tray Reduction Kit
EDRSKIT Parts required 1 x CM558211 4 x CM801011 4 x CM558011 2 x CM558041
Network Infrastructure
V1.5 appendix E Ordering.doc Page 24
https://www.legrand.us/cablofil/cable-tray-wire-mesh/splicing/edrskit.aspx https://www.legrand.us/-/media/brands/cablofil/cablofil-products/cable-tray-wire-mesh/cutsheets/edrskit%20cutsheet.ashx
Conduit and box support
http://www.cablofil.co.uk/product/box-conduit/cm50-cm50-xl-cat40
CM50 / CM50 XL / CAT40
Angle Bracket
Parts required: 1 x CM557300 2 x CM801011 2 x CM558011 2 x CM558041
Network Infrastructure
V1.5 appendix E Ordering.doc Page 25
US Products available to ICL installers (or replacement):
DO Waterfall Dropout (https://www.legrand.us/cablofil/cable-tray-wire-mesh/other-mounting/do/) (https://www.legrand.us/-/media/brands/cablofil/cablofil-products/cable-tray-wire-mesh/cutsheets/do%20cutsheet.ashx)
DO54/150 DO54/300 DO105/150 DO105/300
Over-the-top dropout https://www.legrand.us/cablofil/cable-tray-wire-mesh/other-mounting/otdofas.aspx https://www.legrand.us/-/media/brands/cablofil/resources/cut-sheet/cabcs0706%20-%20mini%20waterfall.ashx
OTDOFAS
Universal Drop Out https://www.legrand.us/cablofil/cable-tray-wire-mesh/other-mounting/udo.aspx https://www.legrand.us/-/media/brands/cablofil/resources/cut-sheet/cf-cutsheet-universal-drop-out.ashx
UDO
Cable Bundler (Optional to Velcro) https://www.legrand.us/cablofil/cable-tray-wire-mesh/other-mounting/cablo-snap.aspx https://www.legrand.us/-/media/brands/cablofil/cablofil-products/cable-tray-wire-mesh/cable-management-accessories/cable-bundler/cablosnap/cabcs1018-cablo-snappdf.ashx
CABLO SNAP
J-Hooks
Brand
ERICOCO
Designation Part code
J-Hooks
Ordering
Network Infrastructure
V1.5 appendix E Ordering.doc Page 26
CMS (http://www.cmsplc.com/)
CADDY CAT HP - (J-Hooks) HPJ100
Active equipment WAPs
Brand
Cisco
Cisco
Designation Part code
Imperial College ICT will specify the units and design the implementation.
Part code Ordering
Imperial College London - ICT
Switches
Brand
Juniper
Network Infrastructure
V1.5 appendix E Ordering.doc Page 27
Designation Part code
Imperial College ICT will specify the units.
Ordering
Imperial College London - ICT