infinity octagon bone level drilling...
TRANSCRIPT
infinity OCTAGON BONE LEVEL Drilling SequencesACE Surgical Supply Co., Inc. • www.infinitydentalimplant.com Caution: The surgical twist drills are 0.5mm longer in apical length than what is described. Den t a l Imp l a n t S y s t ems
Surgical Componentssee other side for location in the surgical kit
A2.2mm Round
Bur
B2.2mm Twist Drill
Paralleling Pin
B2.2mm Twist Drill
C2.8mm Twist Drill
2.0mm Depth Gauge
D3.5mm Twist Drill
3.0mm Depth Gauge
D4.2mm Twist Drill
C3.3mm
BL Profile Drill
D4.1mm
BL Profile Drill
D4.8mm
BL Profile Drill
C3.3mm
BL Bone Tap
D4.1mm
BL Bone Tap
D4.8mm
BL Bone Tap
Delivery Driver
DetailsDrill Pilot Hole
Drill to 6mm
Marking
Confirm Drilling Angle
Drill to Implant Length
Drill to Implant Length
Confirm Drilling Depth
Drill to Implant Length
Drill to Implant Length
Drill to Implant Length
Drill to Top of Drill
Drill to Top of Drill
Drill to Top of Drill
Drill to Implant Length
Drill to Implant Length
Drill to Implant Length
Choose Either Ratchet or
Contra Angle
SPEED 800 RPM
800 RPM
–800 RPM
600 RPM
–500 RPM
–400 RPM
300 RPM
300 RPM
300 RPM
15 RPM
15 RPM
15 RPM
15 RPM 35 Ncm
ø3.3 A B B C C C
ø4.1 A B B C D D D
ø4.8 A B B C D E E E
*16mm
*14mm
12mm
10mm
8mm
6mm
Drill Laser Markings
*No 14mm or 16mm markings on short
drill.
When drilling in dense bone, select the corresponding bone tap for the implant being installed and tap to the appropriate implant length.
BONE TAPPING SUGGESTIONS PER BONE DENSITY
BONE CLASS
Ø3.3mm NP
Ø4.1mm RP
Ø4.8mm RPTYPE 1 FULL FULL FULLTYPE 2 FULL FULL FULLTYPE 3 FULLTYPE 4 FULL
DEPTH GAUGE
Ø 2.0mm 5064557 Ø 3.0mm 5064556
HOLDING KEY
5064563
TORQUE RATCHET
5089048
DRILL EXTENDER HANDPIECE
04959901
Implant Driver
Handpiece Contra Angle
Short 5031056 Long 5031057
Ratchet Short 5064558 Long 5017372
Screwdriver
Hand/Ratchet Short 5063978
Medium 5064551 Long 5064553
Handpiece Contra Angle
5031052
Ø 2.2mm Round
Bur
5031061
Ø 2.2mm Twist Drill
Long 5038121
Short 5038120
Ø 3.3mm Tissue Level Profile Drill - RP 5038137
Bone Tap - RP - Long 5072268 Bone Tap - RP - Short 5095267
Ø 3.3mm Bone Level Profile Drill - NP 5022136
Bone Tap - NP 5022138
Ø 4.1mm Tissue Level Profile Drill - RP 5038147
Profile Drill - RP Tapered 5093740 Bone Tap - RP Long 5031088 Bone Tap - RP Short 5095265
Ø 4.1mm Bone Level Profile Drill - RP 5022111
Bone Tap - RPT Tapered 5095264
Ø 4.8mm Tissue Level Profile Drill - WP* 5093738
Bone Tap - RP Long 5061314 Bone Tap - RP Short 5095266
Ø 4.8mm Bone Level Profile Drill - RP 5022114
Bone Tap - RP 5095269
*Wide Platform only.
Ø 2.8mm Twist Drill
Long 5038148
Short 5038149
Ø 3.5mm Twist Drill
Long 5038136
Short 5038135
Ø 4.2mm Twist Drill
Long 5038152
Short 5038151
Ø 2.2mm Paralleling Pins Reorder 2/pkg.
5064559
Please Note:
For optimal efficiency, drills and taps should
be replaced after every ten (10) uses.
C D EBA