industrial lithium-ion battery toshibarechargeablebattery...model nominal capacity nominal voltage...
TRANSCRIPT
ToshibaRechargeableBattery_SCiB_catalog_2010110
100
90
80
70
60
50
40
30
20
10
0
Test conditions: A test condition for the battery: high-rate (3C) charge/discharge cycles at 25°C
C a
p a
c it
y re
co v
e ry
120
100
80
60
40
20
0 -40 -30 -20 -10 0 10 20 30 40 50 60
×100
100%
110
100
90
80
70
60
50 0 30 60 90 120 150 180 210 240 270 300 330 360
35 °C
25 °C
45 °C
In case of an internal short circuit, the lithium titanium oxide (LTO) in the anode layer of SCiB™ phase
transforms to being highly resistive, thus minimizing risk of drastic current flow that may lead to rupture,
fire, or other accidents.
The capacity remains at 70% or more even after 20,000 times of charging/discharging. SCiB™ also has
small degree of deterioration even with float charging*, making it usable for applications that keep
constant voltage such as backup power supply.
The favorable anode charging characteristics provide rapid charging to about 80% of the capacity in 6
minutes.
High-resistive phase
Safety
in 6minutes
Rapid charging
C h
a rg
in g
c a
p a
c it
Rapid charging characteristics(20Ah cell)
Float charging voltage: 2.7 V Test temperature: 25, 35, 45ºC
Since there is almost no lithium metal deposition even at low temperature usage, repeated charging and
discharging is possible at -30.
Usable even at -30ºC
Performance at low temperature
SCiB™ can accept large current input and output. Thus, it can store large regenerative energy generated
during deceleration of railways and automobiles, and can supply large current necessary for starting the
motor.
High input/output
SCiB™ exhibits excellent input/output characteristics over a wide SOC* range. This makes it possible to
reduce the nominal battery capacity or amount of batteries necessary for a system, as compared to other
batteries that have a narrower SOC range.
Available SOC range
The indicated data were measured under specific conditions. The performance varies according to the customer's condition for use.
Discharge capacity of C/3 at each temperature
Discharge capacity of C/3 at 25ºC
SCiB™ uses lithium titanium oxide in its
anode to achieve excellent characteristics
UPS
AGV
Automobile, ship, railway, etc.
fare machine
Signal light
Transforming station
Theme park
This battery has been adopted for low-fuel-consumption technologies that effectively use regenerative energy at deceleration.
This battery has been adopted for rapid-charge-type electric buses in operation in California and other 11 states in the United States.
Suzuki Motor Corporation
Mild hybrid
This battery has been adopted for the rapid-charge hybrid-type boat "RAICHO-N".
Tokyo University of Marine Science and Technology
Hybrid-type battery-powered boat
This battery has been adopted for power supply devices for running in emergency in Tokyo Metro Ginza Line 1000-series cars.
Tokyo Metro Co., Ltd.
Proterra, Inc.
Rapid-charge-type electric bus
This battery has been adopted for hybrid-type tram buses in operation in cities in Europe.
Van Hool
Hybrid-type tram bus
This battery has been adopted for measures to balance the demand and supply due to diffusion of recyclable energy.
Tohoku Electric Power Co., Inc.
Battery system for the Minami-soma Substation
This battery has been adopted for large battery systems for adjustment of electricity demand and supply in the United States.
Willey Battery Utility, LLC
Battery system for adjustment of electricity demand and supply
This battery has been adopted for the elevator that moves continuously in the case of power outage.
This battery has been adopted for uninterruptible power supplies (UPS) that serve as backup power supplies for critical loads including small servers to large data centers.
TOSHIBA ELEVATOR AND BUILDING SYSTEMS CORPORATION
Power-outage continuous operation function TOSHIBA INFRASTRUCTURE SYSTEMS & SOLUTIONS CORPORATION
Uninterruptible power supply (UPS)
This battery has been adopted for automated guided vehicles (AGVs) in the production line in Kashiwazaki Factory of Toshiba Corporation.
Toshiba Corporation
Automated guided vehicle (AGV)
This battery has been adopted for street light systems that store the electricity generated by solar power panels and activates night lights.
L-Kougen Co. Ltd.
Solar power light
This batter y has been adopted for regenerative battery devices to effectively use the regenerative electricity generated by deceleration of a railcar.
TOBU Railway CO., LTD.
22Ah, 556Wh/44Ah, 1112Wh
SCiBTM module This consists of more than one cell combined to obtain the required capacity and voltage. A cell monitoring unit (CMU) is mounted, and controller area network (CAN) communication provides transmission of the voltage data and temperature data. Additionally, SCiB™ Industrial Pack and five-series battery pack are equipped with a battery management unit (BMU) and do not require an external protection circuit for use.
Photo
For industrial devices and stationary systems BMU installation type BMU installation type
Approx. 15 kg Approx. 14kg
18.0 to 32.4V
-30 to 45ºC
160 A (continuous), 350 A (rush current)
W190×D361×H125mm (Protrusions excluded)
Approx. 4.3kg Approx. 8kg Approx. 16kg Approx. 16kg
Charging by solar power generation (PV) is enabled.
Using one module Using two units of [*1] in parallel
Using two units of [*2] in series Cell voltage measurement, module temperature measurement, cell balancing*, communication (CAN)
* Function to even differences in voltage among cells connected in series
85%RH or less (no condensation)
W247× D188 × H165mm Using the two units
described on the left hand Using two units (W247× D188 × H165mm)
DC27.6V
1112Wh [*1]
W140×D421×H62mm
Voltage range
Max.charge/discharge current
Lineupof Toshiba Rechargeable Battery SCiBTM, selectable according to your application
SCiBTM system This is the stationary battery system widely used for the purpose of stable supply of electricity, backup, energy saving, and others.
Three-phase system seriesSingle-phase system series
Toshiba IT & Control Systems Corporation
System/Series
Model
Output
* These products are only available for Japan.
* This value is calculated from the internal resistance. 23Ah and 10Ah cell use part of technology achievement made by Japan's New Energy and Industrial Technology Development Organization (NEDO) subsidized projects. Specifications shown herein are not guaranteed values. These values are subject to change without notice. Performance depends on usage conditions.
W116×D22×H106 mm
SCiBTM cell SCiB™ rechargeable cells can be categorized into two types: high energy and high power. The high energy type is used when a large capacity is required for electric automobiles, stationary batteries, and others, while the high power type is used when charge/discharge of a large current is required in a short time such as use of regenerative energy.
Photo Photo
Product name
Rated capacity
Nominal voltage
Output Power
Input Power
23Ah cell
92Wh/L
47Wh/kg
85Wh/L
46Wh/kg
proposal
SCiB™ can be used in a wide range of applications, such as automotive, railway, industrial equipment, power equipment and power supply
solutions for buildings and facilities. To customers who are considering using the SCiB™ for mass production, please feel free to contact us.
Toshiba's production facility in Kashiwazaki city, Niigata prefecture, produces SCiB™ batteries under a high-level manufacturing
and quality management system. By flexibly managing the clean and dry rooms, the facility minimizes the energy consumption
required to maintain its manufacturing environment.
Compliant with IATF16949, the operations achieve a high level of quality and reliability.
Delivery
The description in this catalog is as of October at 2020.
SCiB http://www.scib.jp/en/index.htm
Do not use this product for facilities in which there is a risk to human life or a disruption to public functionality if the product fails or malfunctions (nuclear power generator controls, aerospace applications, traffic equipment, life support equipment,
safety equipment, and others).
This product is produced under strict quality controls, however it may malfunction depending on the operating environment and conditions. Please consider countermeasure design (redundancies, failsafe measures, etc.) if using this product in facilities
in which failure of the product would be expected to cause a great loss or accident.
The operating environment must be within the range of specifications noted in the catalog and instruction manuals. Using the product outside the specified range may cause injury, a re, or some other accident.
Be sure to carefully read the instruction manuals before using this product so that you can use it correctly.
Toshiba is not responsible for any losses related to malfunctions or abnormalities in equipment or devices connected to the product when the product fails or malfunctions, including losses from other secondary repercussions.
The technical information in this document is for the purpose of explaining the typical operations and applications of the product, but not for granting any license or guarantee in regard to intellectual property rights, or any other rights, belonging to
third parties or Toshiba.
The product described in this document cannot be used in conjunction with products that are prohibited from production or sale by any rules, regulations, or laws in Japan or overseas.
When exporting this product separately or combined with your equipment, please be sure to satisfy the objective conditions and inform conditions listed in the export control policies, so called Catch All restrictions, which are set by the Ministry of
Economy, Trade and Industry of Japan, and the appropriate export procedures must also be taken.
The description in this catalog may change without prior notice. The product names, etc. described in this catalog may be used as the trademarks of each company. All rights reserved. The product color may be different from the actual machine according to printing. The design, specifications, components, and others may change without prior notice. The package design presented is for catalog purpose, so the design of the actual battery will be different.
For detailed information of this product, please visit our Website.
Safety precautions
100
90
80
70
60
50
40
30
20
10
0
Test conditions: A test condition for the battery: high-rate (3C) charge/discharge cycles at 25°C
C a
p a
c it
y re
co v
e ry
120
100
80
60
40
20
0 -40 -30 -20 -10 0 10 20 30 40 50 60
×100
100%
110
100
90
80
70
60
50 0 30 60 90 120 150 180 210 240 270 300 330 360
35 °C
25 °C
45 °C
In case of an internal short circuit, the lithium titanium oxide (LTO) in the anode layer of SCiB™ phase
transforms to being highly resistive, thus minimizing risk of drastic current flow that may lead to rupture,
fire, or other accidents.
The capacity remains at 70% or more even after 20,000 times of charging/discharging. SCiB™ also has
small degree of deterioration even with float charging*, making it usable for applications that keep
constant voltage such as backup power supply.
The favorable anode charging characteristics provide rapid charging to about 80% of the capacity in 6
minutes.
High-resistive phase
Safety
in 6minutes
Rapid charging
C h
a rg
in g
c a
p a
c it
Rapid charging characteristics(20Ah cell)
Float charging voltage: 2.7 V Test temperature: 25, 35, 45ºC
Since there is almost no lithium metal deposition even at low temperature usage, repeated charging and
discharging is possible at -30.
Usable even at -30ºC
Performance at low temperature
SCiB™ can accept large current input and output. Thus, it can store large regenerative energy generated
during deceleration of railways and automobiles, and can supply large current necessary for starting the
motor.
High input/output
SCiB™ exhibits excellent input/output characteristics over a wide SOC* range. This makes it possible to
reduce the nominal battery capacity or amount of batteries necessary for a system, as compared to other
batteries that have a narrower SOC range.
Available SOC range
The indicated data were measured under specific conditions. The performance varies according to the customer's condition for use.
Discharge capacity of C/3 at each temperature
Discharge capacity of C/3 at 25ºC
SCiB™ uses lithium titanium oxide in its
anode to achieve excellent characteristics
UPS
AGV
Automobile, ship, railway, etc.
fare machine
Signal light
Transforming station
Theme park
This battery has been adopted for low-fuel-consumption technologies that effectively use regenerative energy at deceleration.
This battery has been adopted for rapid-charge-type electric buses in operation in California and other 11 states in the United States.
Suzuki Motor Corporation
Mild hybrid
This battery has been adopted for the rapid-charge hybrid-type boat "RAICHO-N".
Tokyo University of Marine Science and Technology
Hybrid-type battery-powered boat
This battery has been adopted for power supply devices for running in emergency in Tokyo Metro Ginza Line 1000-series cars.
Tokyo Metro Co., Ltd.
Proterra, Inc.
Rapid-charge-type electric bus
This battery has been adopted for hybrid-type tram buses in operation in cities in Europe.
Van Hool
Hybrid-type tram bus
This battery has been adopted for measures to balance the demand and supply due to diffusion of recyclable energy.
Tohoku Electric Power Co., Inc.
Battery system for the Minami-soma Substation
This battery has been adopted for large battery systems for adjustment of electricity demand and supply in the United States.
Willey Battery Utility, LLC
Battery system for adjustment of electricity demand and supply
This battery has been adopted for the elevator that moves continuously in the case of power outage.
This battery has been adopted for uninterruptible power supplies (UPS) that serve as backup power supplies for critical loads including small servers to large data centers.
TOSHIBA ELEVATOR AND BUILDING SYSTEMS CORPORATION
Power-outage continuous operation function TOSHIBA INFRASTRUCTURE SYSTEMS & SOLUTIONS CORPORATION
Uninterruptible power supply (UPS)
This battery has been adopted for automated guided vehicles (AGVs) in the production line in Kashiwazaki Factory of Toshiba Corporation.
Toshiba Corporation
Automated guided vehicle (AGV)
This battery has been adopted for street light systems that store the electricity generated by solar power panels and activates night lights.
L-Kougen Co. Ltd.
Solar power light
This batter y has been adopted for regenerative battery devices to effectively use the regenerative electricity generated by deceleration of a railcar.
TOBU Railway CO., LTD.
22Ah, 556Wh/44Ah, 1112Wh
SCiBTM module This consists of more than one cell combined to obtain the required capacity and voltage. A cell monitoring unit (CMU) is mounted, and controller area network (CAN) communication provides transmission of the voltage data and temperature data. Additionally, SCiB™ Industrial Pack and five-series battery pack are equipped with a battery management unit (BMU) and do not require an external protection circuit for use.
Photo
For industrial devices and stationary systems BMU installation type BMU installation type
Approx. 15 kg Approx. 14kg
18.0 to 32.4V
-30 to 45ºC
160 A (continuous), 350 A (rush current)
W190×D361×H125mm (Protrusions excluded)
Approx. 4.3kg Approx. 8kg Approx. 16kg Approx. 16kg
Charging by solar power generation (PV) is enabled.
Using one module Using two units of [*1] in parallel
Using two units of [*2] in series Cell voltage measurement, module temperature measurement, cell balancing*, communication (CAN)
* Function to even differences in voltage among cells connected in series
85%RH or less (no condensation)
W247× D188 × H165mm Using the two units
described on the left hand Using two units (W247× D188 × H165mm)
DC27.6V
1112Wh [*1]
W140×D421×H62mm
Voltage range
Max.charge/discharge current
Lineupof Toshiba Rechargeable Battery SCiBTM, selectable according to your application
SCiBTM system This is the stationary battery system widely used for the purpose of stable supply of electricity, backup, energy saving, and others.
Three-phase system seriesSingle-phase system series
Toshiba IT & Control Systems Corporation
System/Series
Model
Output
* These products are only available for Japan.
* This value is calculated from the internal resistance. 23Ah and 10Ah cell use part of technology achievement made by Japan's New Energy and Industrial Technology Development Organization (NEDO) subsidized projects. Specifications shown herein are not guaranteed values. These values are subject to change without notice. Performance depends on usage conditions.
W116×D22×H106 mm
SCiBTM cell SCiB™ rechargeable cells can be categorized into two types: high energy and high power. The high energy type is used when a large capacity is required for electric automobiles, stationary batteries, and others, while the high power type is used when charge/discharge of a large current is required in a short time such as use of regenerative energy.
Photo Photo
Product name
Rated capacity
Nominal voltage
Output Power
Input Power
23Ah cell
92Wh/L
47Wh/kg
85Wh/L
46Wh/kg
proposal
SCiB™ can be used in a wide range of applications, such as automotive, railway, industrial equipment, power equipment and power supply
solutions for buildings and facilities. To customers who are considering using the SCiB™ for mass production, please feel free to contact us.
Toshiba's production facility in Kashiwazaki city, Niigata prefecture, produces SCiB™ batteries under a high-level manufacturing
and quality management system. By flexibly managing the clean and dry rooms, the facility minimizes the energy consumption
required to maintain its manufacturing environment.
Compliant with IATF16949, the operations achieve a high level of quality and reliability.
Delivery
The description in this catalog is as of October at 2020.
SCiB http://www.scib.jp/en/index.htm
Do not use this product for facilities in which there is a risk to human life or a disruption to public functionality if the product fails or malfunctions (nuclear power generator controls, aerospace applications, traffic equipment, life support equipment,
safety equipment, and others).
This product is produced under strict quality controls, however it may malfunction depending on the operating environment and conditions. Please consider countermeasure design (redundancies, failsafe measures, etc.) if using this product in facilities
in which failure of the product would be expected to cause a great loss or accident.
The operating environment must be within the range of specifications noted in the catalog and instruction manuals. Using the product outside the specified range may cause injury, a re, or some other accident.
Be sure to carefully read the instruction manuals before using this product so that you can use it correctly.
Toshiba is not responsible for any losses related to malfunctions or abnormalities in equipment or devices connected to the product when the product fails or malfunctions, including losses from other secondary repercussions.
The technical information in this document is for the purpose of explaining the typical operations and applications of the product, but not for granting any license or guarantee in regard to intellectual property rights, or any other rights, belonging to
third parties or Toshiba.
The product described in this document cannot be used in conjunction with products that are prohibited from production or sale by any rules, regulations, or laws in Japan or overseas.
When exporting this product separately or combined with your equipment, please be sure to satisfy the objective conditions and inform conditions listed in the export control policies, so called Catch All restrictions, which are set by the Ministry of
Economy, Trade and Industry of Japan, and the appropriate export procedures must also be taken.
The description in this catalog may change without prior notice. The product names, etc. described in this catalog may be used as the trademarks of each company. All rights reserved. The product color may be different from the actual machine according to printing. The design, specifications, components, and others may change without prior notice. The package design presented is for catalog purpose, so the design of the actual battery will be different.
For detailed information of this product, please visit our Website.
Safety precautions