industrial hardware distributors, inc. catalog hardware distributors, inc. grab handles dimensions:...
TRANSCRIPT
117620 Spicer St., Akron, OH 44311 • 800.824.1864 | 3415 S.W. 6th St., Ocala, FL 34474 • 800.682.8900www.industrialhwe.com
Industrial Hardware Distributors, Inc.
GRAB HANDLES
Dimensions:12-15/16" length overall
7-3/16" length of grab section1-5/8" flat ends (approx.)7/32" diameter countersunk holes
2" rise of handle
Weight: 1 lb.Finish: Zinc-plated or chrome-plated
No. Variations Weight
4300 Formed steel. 1 lb.
3-4300 Same as 4300 except without holes. 1 lb.
4-4300 Same as 4300 except with (4) 11/32" dia. mounting holes, no countersink. 1 lb.
AL-4300 Same as 4300 except made .34 lbs.of aluminum.
Other versions available.
No. AL-4300
No. 4302
These molded corrosion-resistant polyurethane handles have a stampedsteel insert for added strength. Their contemporary styling makes themideal for roll-up doors, refrigerators and many other uses.
Operating temperature range – 40°F to 175° F
Weight: .30 lbs.Finish: Black
No. 4302
No. 4300
No. 16875-52LThis large grab handle comes with a handle release pin to preventhandle from being separate from application and a .64" square shank. Handle itself is a molded plastic grip which allows for a comfortable grip when actuating.
Weight: 3 lbs.
No. 4300Body Grab Handle – Heavy-duty formed steel grab handle.
No. AL16875-SS85Cable andPin Assembly
118 620 Spicer St., Akron, OH 44311 • 800.824.1864 | 3415 S.W. 6th St., Ocala, FL 34474 • 800.682.8900www.industrialhwe.com
Industrial Hardware Distributors, Inc.
GRAB HANDLES
No. 4303These molded corrosion-resistant polyurethane handles have astamped steel insert for added strength. Their contemporary styling makes them ideal for roll-up doors, refrigerators and manyother uses.
Operating temperature range –40ºF to 175°F.
Weight: .39 lbs.Finish: Black
No. 4303
No. 4304No. 4304Pull Handle offers excellent handle clearance and attractive appearance.
Material:Zinc die castFinish: Polished chromeWeight: .39 lbs.
119620 Spicer St., Akron, OH 44311 • 800.824.1864 | 3415 S.W. 6th St., Ocala, FL 34474 • 800.682.8900www.industrialhwe.com
Industrial Hardware Distributors, Inc.
GRAB HANDLES
ASSIST HANDLES
819-C Chrome Finish819-Z Zinc plated
817-B Black Vinyl Finish*817-C Commercial Chrome Finish Steel817-DN Duplex Nickel Chrome Finish Steel817-P Plain Finish Steel817-SS Polished Stainless Steel817-Z Zinc Plated Steel821 Steel—Same as 817-P except supplied
without holes for welding.821-SS Stainless Steel—Same as 817-P except
supplied without holes for welding.
816 Plain Finish816-B Black Vinyl Finish*
* Note: Black vinyl coated handles are not countersunk.
No. 516No. 516No. 516No. 516No. 516Same as the no. 517 but made from aluminum.516 Plain aluminum516-001 Plain aluminum (not
countersunk)
No. 817 SeriesNo. 817 SeriesNo. 817 SeriesNo. 817 SeriesNo. 817 SeriesSteel assist handle. 1/2" dia. steel rod. 13" overall,2" high with 7" grab. Drilled and countersunkfor 1/4" screws. Weight — .8 lbs
No. 816 SeriesNo. 816 SeriesNo. 816 SeriesNo. 816 SeriesNo. 816 SeriesAluminum assist handle. Made from 1/2" dia. alumi-num. 13" overall length, 2" high with 7" grab. Holesdrilled and countersunk for 1/4" screws.
Several finishes available as follows:
No. 819No. 819No. 819No. 819No. 819Steel assist hande, slightly larger than the 817handle. 1/2" dia. steel rod 16" overall. 3" highwith 9" grab. Holes are drilled and counter-sunk for 1/4" screws.Weight — 1 lb
Steel assist hande, has same hole pattern as the817 handle with squared ends. 1/2" dia. steelrod. Holes are drilled and countersunk for 1/4"screws.517-C Chrome finish517-DN Duplex nickel chrome finish517-SS Polished Stainless steel
No. 517No. 517No. 517No. 517No. 517
Part No. A B516/517 7-3/4" 10-1/8"516-001 13" 15-1/4"
816816816816816817817817817817
821821821821821
120 620 Spicer St., Akron, OH 44311 • 800.824.1864 | 3415 S.W. 6th St., Ocala, FL 34474 • 800.682.8900www.industrialhwe.com
Industrial Hardware Distributors, Inc.
GRAB HANDLES
No. AL7-4300Black Anodized Grab Handle
No. 12378771Rubber-Coated Grab Handle
No. AL7-4300
No. 2390-A2 4 Grab Handle
Furnished in black powder coat finish.
No. 2390-A24
600 SERIES600 SERIES600 SERIES600 SERIES600 SERIES
Part No. A B C D612/612-A/612-SS 12" 17.75" 16.25" .33”*618/618-A/618-SS 18" 23.68" 22.75" .33”*624/624-A/624-SS 24" 29.75" 28.75" .33”*636/636-SS 36.5" 41.68" 40.75" .33”*
Heavy duty assist handles made from 5/8" dia. rod. For applications requiring a heavy duty handle.Chrome handles are duplex nickel chrome plated. Stainless handles are polished. Aluminum handlesare plain finish.
NOTE: Stainless steel handles are made of 16 ga. wall 304 stainless tubing.* The ‘D’ dimension on the stainless handle is .140
HEAVY DUTY ASSIST HANDLEStainless Steel -- Steel -- Aluminum
121620 Spicer St., Akron, OH 44311 • 800.824.1864 | 3415 S.W. 6th St., Ocala, FL 34474 • 800.682.8900www.industrialhwe.com
Industrial Hardware Distributors, Inc.
GRAB HANDLES
122 620 Spicer St., Akron, OH 44311 • 800.824.1864 | 3415 S.W. 6th St., Ocala, FL 34474 • 800.682.8900www.industrialhwe.com
Industrial Hardware Distributors, Inc.
GRAB HANDLES
Weep-hole and ramp design assures maximum water egress. Same appearance, strength andquality as current stanchion. Easily fits all Hansen grab rails including the 4000 Series Anti-Slip and the Lit Anti-Slip Rail™ Locking.
Materials: Zinc with Chrome Finish
Extruded polished aluminum tube with rubber inserts providing maximum gripping ability. Custom lengths available.
Materials: Aluminum (Bright Anodized) and EPDM
Length: 4’, 6’, 8’, 10’, 12’
Available With: Custom Lengths with Gaskets
®- 3/4 INCH KNURLED
NEW!
NEW!
Patent Pending
Patent PendingHRU09ALAN-18 18'' Formed 1 1/8 Anti-Slip Grip
HRU09ALAN-19 24'' Formed 1 1/8 Anti-Slip
HRU09ALAN-30 30'' Formed 1 1/8 Anti-Slip
Brief Descripion: This formed rail provides a knurled texture to prevent hand slippage
Materials: Stainless Steel (304) tubing
For Use On: Emergency Vehicles, Buses, Heavy Truck, Utility Vehicles, Service Bodies, RTV’s
HKN06SSPL-14 14” Formed 3⁄4 Knurled Grab Handle
HKN066SSPL-18 18” Formed 3⁄4 Knurled Grab Handle
HKN066SSPL-24 24” Formed 3⁄4 Knurled Grab Handle
HKN066SSPL-30 30” Formed 3⁄4 Knurled Grab Handle
HA4000CHR
HA4000CTR
HAI283157
HAI28315
STAINLESS STEEL RAIL
1 1/8 INCH ALUMINUM ANTI-SLIP®
Brief Description: This aluminum product is offered with formed mounting feet, and features a rubber
insert to prevent hand slippage.
Materials: Aluminum Extrusion, Polished and Bright Anodized
Use With: Custom Foot gaskets
For Use On: Emergency Vehicles, Buses, Heavy Truck, Utility Vehicles, Service Bodies
4000 ANTI-SLIP RAIL
CR383036 S4000 Rail by the Inch
HA4000E
End Straight
HA4000T
Center Straight
End Angled Right Hand
End Angled Left Hand
Elbow
“T”
4000 STANCHION SERIES II
thgieW 1 FO 1 TEEHS
1:1 :ELACS
SECNARELOT
No. HAIAL026
LED Light Version Available
123620 Spicer St., Akron, OH 44311 • 800.824.1864 | 3415 S.W. 6th St., Ocala, FL 34474 • 800.682.8900www.industrialhwe.com
Industrial Hardware Distributors, Inc.
GRAB HANDLES
‘FOAMED’STEEL-COREDGRAB RAIL 300mmMoulded in expanded polyurethane foam, this handle has a soft, resilient surface and no sharp edges, while the steel core provides strength and rigidity. This modern design replacestraditional steel stanchion rails, and ensures safety and comfort when used as a grab, or entry-assist rail.
‘FOAMED’STEEL-COREDGRAB RAIL 475mmThis model meets the requirement for an entry-assist rail with extended length of grip for usewith entry steps on buses and coaches, or for high cabs and trucks. It is made in solid 10mmsteel rod to achieve maximum strength without 'fl exing'.
Soft, padded surface. No sharp edges, for maximum safety. Triangular section for good grip.Mounting holes concealed by ‘snap-in’ plugs.
Attractive, textured fi nish. Standard colours are black, red and yellow. Other colours can be moulded subject to batch-quantity requirements.
Fixing by bolting through four holes in steel core. Handle cannot be ‘fl exed’.
Moulded in expanded polyurethane foam around solid,10mm steel rod. Meets EC 95/28/CE regulations for combustibilty (less than 100mm per minute).
This handle is a direct alternative to Happich 930 0000.
LOAD TESTING:Tests carried out by an independent proof house gave following results:Parallel to fi xing, load 3.70 Kilo-Newtons (377Kg) before distortion.Vertical to fi xing, load 3.56 Kilo-Newtons (363Kg) before distortion. With ultimate strength over 1 tonne we recommend a safe working load of 250Kg (550lbs) max.
9/01725Grab rail
9/01725 300mm grab rail-black
9/01725/01 300mm grab rail-red to RAL3020
9/01725/02 300mm grab rail, blue/grey
9/01725/03 300mm grab rail, yellow, RAL 1021
ORDERING CODE
9/01226 475mm grab rail, black
9/01226/01 475mm grab rail, red, RAL 3020
9/01226/03 475mm grab rail, yellow, RAL 1021
ORDERING CODE
SPECIFICATION
SPECIFICATION
A. Body Length ..................................................300mmB. Body Width ....................................................102mmC. Body Height .....................................................75mmD. Hole centres ..................................................165mmE. Hole centres ..................................................213mmF. Cross section ..................................................25mmH. Hole sizes (core) ...............................................7mm 10 mm steel reinforcement core
A. Body Length ..................................................475mmB. Body Width ......................................................90mmC. Body Height .....................................................75mmD. Hole centres ..................................................327mmE. Hole centres ..................................................375mmF. Cross section ..................................................33mmH. Hole sizes (core) ...............................................7mm 10 mm steel rod reinforcement core
Plug diameter 15mm accepting bolts to 12mmhead diameter x 7mm shank.Plug ref. 5/00538 (specify colour).
NOTE: Rigid steel core means that handle cannotbe ‘fl exed’ to accommodate deviations in fi xingholes.
124 620 Spicer St., Akron, OH 44311 • 800.824.1864 | 3415 S.W. 6th St., Ocala, FL 34474 • 800.682.8900www.industrialhwe.com
Industrial Hardware Distributors, Inc.
GRAB HANDLES
‘FOAMED’STEEL-CORED'HAND-HOLD'150mmThis unique design complements our range of larger "foamed" grab rails, but is suited to morerestricted spaces. It makes an ideal alternative to traditional "6-inch" pulls, with textured, resilient surface, great strength, and a shape that lends itself to fi xing in several modes as illustrated.
Resilient, padded surface. No sharp edges, for maximum safety. Triangular section for good grip.Mounting holes concealed by 'snap-in' plugs.
Attractive, textured fi nish. Standard colours are black and red, other colours can be moulded subject to batch-quantity requirements.
Fixing by bolting through holes in top rail (through steel core).
Moulded in expanded polyurethane foam around welded steel former (core). Meets EC 95/28/CE regulation for combustibility (less than 100mm per minute).
LOAD TESTING:The handle was tested to destruction,with the following results:Parallel to axis fi xing, max load 14.84 Kilo-Newtons (1.51 tonnes)Vertical to fi xing, max load 13.77 Kilo-Newtons (1.4 tonnes)With Ultimate strength over 1 tonne we recommend a safe working load of 500Kg (1100lbs) max.
9/01228 Hand-hold, black
9/01228/01 Hand-hold, red RAL3020
ORDERING CODE SPECIFICATIONA. Body Length ..................................................175mmB. Body Width ....................................................100mmC. Body Height .....................................................66mmD. Hole centres ..................................................151mmE. Cross section ..................................................25mmH. Hole sizes (core) ...............................................7mm 10 mm steel rod reinforcement core
Plug diameter 15mm accepting bolts to 12mmhead diameter x 7mm shank.Plug ref. 5/00538 (specify colour)
Hand-hold in reverse-mode:suitable for seat backs, traysand containers, trailers and
caravans, marine applications.
9/01228Hand-hold in 'forward' mode,
suitable for gantries, platforms,high-access doors, as a grab forstanding passengers, machine
covers and roller-shutters.
125620 Spicer St., Akron, OH 44311 • 800.824.1864 | 3415 S.W. 6th St., Ocala, FL 34474 • 800.682.8900www.industrialhwe.com
Industrial Hardware Distributors, Inc.
GRAB HANDLES
UNIVERSALARMREST/GRAB HANDLEA plant-on, non-'handed'design, this armrest will enhance driver comfort and assist with doorclosure in almost any cab, With fi xing holes normal to the base, and a soft, padded surface the armrest will suit most vehicles, from 'kit' cars to specialist commercial and off-road models.
Non-'handed' for universal fi tting. Soft, padded surface for driver comfort.
Fixing holes normal (90°) to panel face, and below 'line of sight' for good visual appearance.
Black, textured fi nish.
High-density polyurethane foam aroundrigid steel 'former'.Meets EC 95/28/CE regulation for combustibility (less than 100mm per minute).
9/01227Armrest
9/01227 Universal arm rest, black
ORDERING CODE SPECIFICATIONA. Body Length ..................................................222mmB. Body Width ......................................................60mmC. Body Height .....................................................50mmD. Hole centres ..................................................148mmE. Grip width .......................................................24mmF. Fixing boss ........................................................8mmG. Location ..........................................................25mmH. Hole sizes .......................................................6.5mm
126 620 Spicer St., Akron, OH 44311 • 800.824.1864 | 3415 S.W. 6th St., Ocala, FL 34474 • 800.682.8900www.industrialhwe.com
Industrial Hardware Distributors, Inc.
GRAB HANDLES
No. 349F248 Formed Steel Handle(4) 13/64" dia. mounting holes.
No. 9611
No. 9605-C
No. 9611 Formed Steel HandleWeight: .19 lbs.Finish: Zinc-plated
No. 349F248 Formed Steel Handle
Overall Size: 1-1/2" x 5-3/4"Width Base: 7/8"Projection: 1-1/4"Clearance: 7/8"Steel
Weight: .13 lbs.Finish: Plain or zinc-plated
No. 349F258No mounting holes
No. 9605-CHood Handle (formed steel)
No. 1-9611 .375 dia. holes
*reques t q uo t e
No. ST482-3 – 6-1/2"x1-3/4" No.3 Zinc Plated(2C) Door Pull
Features and Benefi ts:• Ideal for use on screen, shed and barn doors• Comfort and appearance is enhanced by rounded contour of handle• NH482 comes without holes and fl attened ends for welding• Grip length: No.1 3-11/32", No.2 4", No.3 4-1/2", No.4 5-5/16"
Product Details: Length 6-1/2",165.1mmWidth 1-3/4",44.45mmClass SP482Finish 2CFinish Description Zinc PlatedGrip Length 4-1/2
127620 Spicer St., Akron, OH 44311 • 800.824.1864 | 3415 S.W. 6th St., Ocala, FL 34474 • 800.682.8900www.industrialhwe.com
Industrial Hardware Distributors, Inc.
GRAB HANDLES
2399 SERIES
2399 1/2
2399 seriesHandles for trailer, utility and commercial vehicles. Available in plain, zinc,and chrome.
PART NO. A B C
2399-A 5.12 8.00 .34
2399-B 7.12 10.00 .34
2399-C 9.12 12.00 .34
2399-D 11.00 14.00 .41
2399 1/2 Series, HandlesAvailable in aluminum, carbon and stainless steel. Standard finishes areplain, zinc and chrome. Anodized or polished finish available for thealuminum and stainless handles.
Note: optional hole sizes of 9/32” diameter and11/32” diameter standard hole size 7/32”.
PART NO. A B
2399-1/2-A 6 8.13
2399-1/2-B 8 10.13
2399-1/2-C 10 12.13
2399-1/2-D 12 14.13
ACCESS HANDLES
128 620 Spicer St., Akron, OH 44311 • 800.824.1864 | 3415 S.W. 6th St., Ocala, FL 34474 • 800.682.8900www.industrialhwe.com
Industrial Hardware Distributors, Inc.
GRAB HANDLES
DOUBLE-SIDEDFLUSH-FITGRAB HANDLESThis design is available in both diecast and moulded construction. It is completely fl ush-fi tting and easy to fi x into panel aperture. Theshaped edges allow easy action with roller shutters and sliding doors. Use the diecast version when handle is used to lift heavyequipment.
Diecast handle is black powder-coated, moulded handle has textured fi nish.
Diecast in zinc alloy, or moulded in glass-fi lled nylon with top and bottom plates ultrasonically welded together.
WINDOW-PULLHANDLE(CONCEALED-FIX)This useful handle is used for pull-open windows in buses and coaches, and similar applications. It is fi tted to the inside of the glass and is held by two bolts from outside, secured into hidden nuts contained in ‘pockets’ within the handle
Secure from outside through two holes in base of handle, into 11mm ‘nut pockets’
Moulded in high-impact ABS with fi ne textured fi nish.
Note: Some restrictions on availability may apply.
9/01390 Recess grab handle, moulded
9/01391 Recess grab handle, diecast
ORDERING CODE SPECIFICATIONA. Length (outer) ...............................................133mmB. Width (outer) ...................................................60mmC. Depth ..............................................................21mmD. Length (inner)..................................................95mmE. Width (inner) ...................................................45mmF. Hole centres ....................................................41mmG. Hole centres ..................................................114mmH. Hole sizes (diameter) ......................6mm, c/s 10mmNote: Because of construction detail, there are projections on dimension ‘D’ to 115mm on diecast model.
9/01390Grab Handle
(view from beneath)
9/01388Window-pull handle
(front view)
SPECIFICATIONA. Length ...........................................................200mmB. Width (max) .....................................................35mmC. Depth ..............................................................30mmD. Hole centres ..................................................120mmH. Hole sizes (dia) ..................................................8mmNote: Nut ‘pockets’ are 11 mm max. width
9/01388 Window-pull handle
ORDERING CODE
LR 400 Plastic Lift
Available Colors: Black, Tan, Gray, Stone, Platinum and Magnolia. Also available in White.
The low profi le design includes counter sunk fastener openings and low rounded edges. Features that eliminate line snags and trip hazards.
129620 Spicer St., Akron, OH 44311 • 800.824.1864 | 3415 S.W. 6th St., Ocala, FL 34474 • 800.682.8900www.industrialhwe.com
Industrial Hardware Distributors, Inc.
GRAB HANDLES
EXTERNAL-FIXGRAB HANDLESwith ‘snap-shut’trim panels
NOW IN TWO SIZES!
Two useful grab handles, with integral 'snap-shut' panels to conceal fi xing holes. Resilient,strong, with no sharp edges, they suit both inside and outside applications, such as vehicle seat-backs, cabinets, carrying-cases, etc.
Strong, lightweight, attractive.
Plant-on fi xing, secured with bolts into slotted holes, integral cover panels.
Textured fi nish, normal colours black, white and blue/grey. Other colours to special request.
LOAD TESTING: ON 1/30357:Tests carried out by an independent proof house gave following results (at 15°C).Parallel to fi xing: Max load 3.00 Kilo-Newtons (306kg) before handle pulled away from bolts.Vertical to fi xing: Max load 1.24 Kilo-Newtons (126kg) before handle pulled away from bolts.With ultimate strength over 300Kg we recommend a safe working load of 100Kg (220lbs) max.
1/30357 Grab handle, black, 173mm
1/30357/02 Grab handle, white (RAL 9016)
9/02357 Grab handle, black, 203mm
ORDERING CODE
SPECIFICATIONA. Length (1/30357) ..........................................173mmA1. Length (9/02357) ..........................................203mmB. Hole centres (1/30357) .................................140mmB1. Hole centres (9/02357) .................................170mmC. Width ...............................................................30mmD. Height .............................................................38mmH. Hole sizes .................................................... 5 x 8mm within recess .......................................... 10 x 13mm
Izod\impact strength at 23°C 9.5 kJ/m2
Embrittlement temperature -20°C
Heat distortion temperature (4.6kg/cm2) 95°C
Melting range 165 - 175°C
Burning rate (3mm) thickness 23mm/minute
UL94 Flammability rating UL94HB
Resistance to ultraviolet light After long exposure, some loss of pigmentbut no detrimental effect on strength
PHYSICAL PROPERTIES OF POLYPROPYLENE
9/02357Grab Handle
(203mm)
1/30357Grab Handle
(173mm)
1-1/8" Bright Brass(3) Round Cabinet Knob – 803020
4" Satin Chromium Plated (26D) Cabinet Pull – 348315
4" Satin Aluminum Metal (27) Cabinet Pull – 348311
• Finely fi nished solid brass round cabinet knob• For cabinet doors or drawers up to 3/4" thick• Lacquered to resist tarnishing
Product DetailsLength.................................................1-1/8", 28.58mmClass................................................................ CD4471Door Thickness (Max.) ............................................ 3/4Finish .......................................................................... 3Finish Description ......................................Bright Brass
• For cabinet doors or drawers• Made of solid brass, in popular fi nishes or in solid aluminum• 1" (25.4 mm) Finger clearance on all items. Projects 1-5/16" (33.2 mm)• Referred to as "wire" pulls• Very acceptable as pulls for bifold doors
• Can be used on slide doors when bumper stops are employed• Diameter is 5/16" (7.9 mm)
Product DetailsLength....................................................... 4", 101.6mmClass..................................................................... 4484Finish ......................................................................26DFinish Description .................... Satin Chromium PlatedProjection............................................................ 1-5/16
Product DetailsLength....................................................... 4", 101.6mmClass..................................................................... 4484Finish ........................................................................ 27Finish Description .......................Satin Aluminum MetalProjection............................................................ 1-5/16
130 620 Spicer St., Akron, OH 44311 • 800.824.1864 | 3415 S.W. 6th St., Ocala, FL 34474 • 800.682.8900www.industrialhwe.com
Industrial Hardware Distributors, Inc.
GRAB HANDLES
131620 Spicer St., Akron, OH 44311 • 800.824.1864 | 3415 S.W. 6th St., Ocala, FL 34474 • 800.682.8900www.industrialhwe.com
Industrial Hardware Distributors, Inc.
GRAB HANDLES
132 620 Spicer St., Akron, OH 44311 • 800.824.1864 | 3415 S.W. 6th St., Ocala, FL 34474 • 800.682.8900www.industrialhwe.com
Industrial Hardware Distributors, Inc.
GRAB HANDLES
Mounts into 3.10 x 5.20 opening
133620 Spicer St., Akron, OH 44311 • 800.824.1864 | 3415 S.W. 6th St., Ocala, FL 34474 • 800.682.8900www.industrialhwe.com
Industrial Hardware Distributors, Inc.
GRAB HANDLES
F
E
GC
A
B
D
A3 Econo Handwheels
A1 Offset Square Rim Handwheels
Chrome plated, machined rim with 1/8" pilotdrilled on hub center.
.oNtraP A C D G
3-3A 3 61/1-1 "1 8/54-3A 4 8/1-1 4/1-1 61/115-3A 5 8/1-1 4/1-1 8/56-3A 6 4/1-1 8/5-1 4/38-3A 8 8/3-1 8/7-1 8/701-3A 01 4/1-2 4/1-2 "1
C
G
A D
1. An economical, yet well-made hand wheel. Comeswith round machined rim. Polished and chromeplated.
2. The hub is center drilled for easy modification. All un-machined surfaces are tumbled smooth.
Material: Cast IronFinish: Bright Chrome Plated
Material: Cast IronFinish: Chrome Plated
.oNtraP A B C D E F G
CA4-1A4 8/3 4/1-1 8/7 4/3
02-4/161/9
CB4-1ACA5-1A
5 8/3 61/7-1 8/1-1 4/381/61-5
8/5CB5-1ACA6-1A
4/1-6 2/1 61/9-1 4/1-1 61/3161-8/3
4/3CB6-1ACA8-1A
8 8/5 4/3-1 61/7-1 "161-8/3
23/52CB8-1ACA01-1A
01 8/5 2 4/3-1 61/3-131-2/1
8/7CB01-1ACA21-1A
8/5-21 4/3 23/5-2 61/3-2 4/1-131-2/1
61/51CB21-1ACA61-1A
8/3-51 4/3 8/1-2 2/1-2 2/1-131-2/1
8/1-1CB61-1A
.oNtraP dexiF gnivloveR eldnaHhtgneL
F4-1A 82-1B2
R4-1A 82-2BF5-1A 33-1B
2/1-2R5-1A 33-2BF6-1A 93-1B
4/1-3R6-1A 93-2BF8-1A 93-1BR8-1A 93-2BF01-1A 35-1B
4
R01-1A 35-2BF21-1A 35-1BR21-1A 35-2BF61-1A 35-1BR61-1A 35-2B
eldnaH htiW leehwdnaHeldnaH tuohtiW leehwdnaH
1. This high-quality cast iron hand wheel is bright chromeplated. The wheel is engineered with three offsetspokes, and has a square outside rim to enhance theappearance.
2. Comes in two types: one with threaded hole for thehandle (Style A), one without (Style B).
134 620 Spicer St., Akron, OH 44311 • 800.824.1864 | 3415 S.W. 6th St., Ocala, FL 34474 • 800.682.8900www.industrialhwe.com
Industrial Hardware Distributors, Inc.
GRAB HANDLES
D12 Adjustable Plastic Handles
.oNtraP A B D E F H J M
A0-21D knalB1A0-21D 42-01# 61/5 46/54 55.0 42.0 5.1 41.1 56.12A0-21D 02-4/1
A1-21D knalB1A1-21D 42-01# 61/5 23/32 55.0 42.0 6.1 41.1 22A1-21D 02-4/1
A2-21D knalB2A2-21D 02-4/1 2/1 8/7 96.0 23.0 1.2 5.1 5.23A2-21D 81-61/5
A3-21D knalB3A3-21D 81-61/5 61/11 61/1-1 78.0 93.0 6.2 88.1 91.34A3-21D 61-8/3
.oNtraP A
5MA0-21D 5M6MA0-21D 6M
5MA1-21D 5M6MA1-21D 6M
6MA2-21D 6M8MA2-21D 8M
8MA3-21D 8M01MA3-21D 01M
.oNtraP A C D E F H J M
701B0-21D 42-01# 4/3
46/54 55.0 42.0 5.1 41.1 56.1502B0-21D
02-4/1
2/1702B0-21D 4/3012B0-21D "1512B0-21D 2/1-1701B1-21D 42-01# 4/3502B1-21D
02-4/1
2/1702B1-21D 4/3 23/32 55.0 42.0 6.1 41.1 2012B1-21D "1512B1-21D 2/1-1503B2-21D
81-61/5
2/1703B2-21D 4/3013B2-21D "1213B2-21D 4/1-1 8/7 96.0 23.0 1.2 5.1 5.2513B2-21D 2/1-1023B2-21D 2523B2-21D 2/1-2704B3-21D
61-8/3
4/3
61/1-1 78.0 93.0 6.2 88.1 91.3
014B3-21D "1214B3-21D 4/1-1514B3-21D 2/1-1024B3-21D 2524B3-21D 2/1-2
.oNtraP * *A
506MB0-21D
6M706MB0-21D016MB0-21D516MB0-21D
506MB1-21D
6M706MB1-21D016MB1-21D516MB1-21D508MB2-21D
8M
708MB2-21D018MB2-21D218MB2-21D518MB2-21D028MB2-21D528MB2-21D7001MB3-21D
01M
0101MB3-21D2101MB3-21D5101MB3-21D0201MB3-21D5201MB3-21D
Tapped Type (Metric)
Stud Type (Inch)
B
J
A C
M
F
E
H
D
16°
A
Stud TypeDouble gear design. 30% strongerthan the major European design.Test data available.Models with stainless steel hardware available as a
special order, add S suffix.
Metric stud typeavailable as aspecial order.
1. Versatile and lightweight, designed for lighter applications.2. Smooth action in releasing/engaging movements. When
handle is lifted, the teeth are disengaged for re-positioning.Release of the handle will re-engage the teeth fortightening or loosening action.
Tapped Type
Tapped Type (Inch)
Stud Type (Metric)
Material: Handle - High Impact Glass Filled NylonInsert - Threaded Steel
Finish: Black
*
Call our sales staff for your specialrequirements.
135620 Spicer St., Akron, OH 44311 • 800.824.1864 | 3415 S.W. 6th St., Ocala, FL 34474 • 800.682.8900www.industrialhwe.com
Industrial Hardware Distributors, Inc.
GRAB HANDLES
F7 Thermoplastic Handles
Black glass filled thermoplastic.
K1 Phenolic Ball Knobs
F6, F61 Variable Length Pull Handles
F
114ß
2.36
1.26
.33
ø1"
.31L
1.14
1.67*
* Assembly includes 1 piece tubing and 2 bases.
.oNtraP).ae(ylnOesaB
kcalB6 eF gnarO16F.oNtraP
ylbmessAesaB&gnibuT L
01-6F 01-16F "0121-6F 21-16F "2181-6F 81-16F "8142-6F 42-16F "4203-6F 03-16F "03
.oNtraP A B C D F
4-7F 75.4 75.1 42.5 49.0 53.05-7F 02.5 96.1 49.5 20.1 33.0
.oNtraP A B C D daerhT
5280-1K 97.0 17.0 74.0 13.0 02-4/10101-1K
89.0 19.0 95.0 93.042-01
5201-1K 02-4/11301-1K 81-61/51341-1K
83.1 62.1 57.0 36.081-61/5
4341-1K 61-8/30541-1K 31-2/10581-1K 77.1 96.1 97.0 17.0 31-2/1
B
D A
C
D
A
C
B
Material: Base - ThermoplasticTubing - Anodized Aluminum
Finish: Black or Orange
Material: ThermoplasticFinish: Black
Material: PhenolicFinish: Black
136 620 Spicer St., Akron, OH 44311 • 800.824.1864 | 3415 S.W. 6th St., Ocala, FL 34474 • 800.682.8900www.industrialhwe.com
Industrial Hardware Distributors, Inc.
GRAB HANDLES
G10 Hub Lock Handles
Application photo only. G serieslever bar sold separately. Please
see above.Hub lock handle
DA
C
T
B
L
1. This unique and very useful product providesgreater flexibility in all lever applications.
2. Simply screw lever bar into the handle and placeon a shaft for sliding up and down.
3. Heat treated for long life.4. Lever arm can be orientated to any desired
position. Precision bored hole provides precisefit to the shaft.
.oNtraP A B C D E F G K M
2-1F 05.3 24.1 67.2 81.1 97.0 97.0 4/1 02.0 42.04-1F 57.4 85.1 87.3 03.1 20.1 78.0 61/5 42.0 82.06-1F "7 79.1 22.6 56.1 01.1 38.0 61/5 53.0 23.0
.oNtraP A B C E F HxG R
2-2F 05.400.2
00.497.0 15.0 74.0x02-4/ 11 5.04-2F 00. 06 5.5
6-2F 00. 08 5.7
F2 Cabinet "U" Handles Aluminum
F1 Cabinet Handles Aluminum Die Castings
A
BC
D
E
F
G
K
M
A
B
CE
F G
H
R
1. This handsome rectangular shape handleallows easy front mounting.
2. Use socket head cap screws or slotted fillisterhead screws.
1. This handsome handle is machined, polishedand painted.
2. Black is the stock color, with red and silveravailable as a special order.
Material: Aluminum Die CastFinish: Black Painted
Material: Aluminum Die CastFinish: Painted Black
Painted Red or Silver (Special order)
Material: Medium Carbon SteelFinish: Black Oxide
.oNtraP A L B C D T
04-01G 573.024.1 81-61/5 42-01 49.0 16.01M4-01G 01M
21M4-01G 21M05-01G 005.0
16.1 61-8/3 02-4/1 01.1 96.021M5-01G 21M41M5-01G 41M
26-01G 526.077.1 31-2/1 02-4/1 62.1 77.041M6-01G 41M
61M6-01G 61M
PART NO. A B C D E F END
575-A 3/8-16 UNC 3.75 .38 .81 .59 SPHERICAL
575-C 1/2-13 UNC 4.00 .44 .94 .66 SPHERICAL
575-E 5/8-11 UNC 4.06 .50 1.13 .50 SPHERICAL
575-G 3/4-10 UNC 5.44 .63 1.19 .69 SQUARE
575-H 7/8-9 UNC 5.44 .75 1.44 .81 SQUARE
LEVER NUTS
575 Series, Lever Nut:The P/N 575 series represent varied approaches to holding or handle applications. This series of Forged Lever Nuts are available from stock in fi ve sizes and threads. The lever is off-set 1 1/2”
575 SERIES
137620 Spicer St., Akron, OH 44311 • 800.824.1864 | 3415 S.W. 6th St., Ocala, FL 34474 • 800.682.8900www.industrialhwe.com
Industrial Hardware Distributors, Inc.
GRAB HANDLES
K20 T-Knobs Thermoplastic
.oNtraPdaerhtdutS/tresnI
02-4/1 81-61/5 61/8-3
epyTelohurhT H52-02K H13-02K H73-02K
dnilB B52-02K B13-02K B73-02K
.oNtraPdaerhtdutS/tresnI
02-4/1 81-61/5 61/8-3
epyTelohurhT - H13-03K H73-03K
dnilB - B13-03K B73-03K
1. These versatile T-Knobs are ideal for any application requiring acomfortable grip and moderate to heavy torque.
2. Attractive satin finish and decorative polished trim give a modern lookto this traditional style.
3. Furnished with metal inserts for both blind and thru hole design.
1. These popular style knobs have a satin finish and a modern,aerodynamic look.
2. All edges have been rounded for a comfortable feel. The hub is extratall to provide greater knuckle clearance, while the durablethermoplastic construction makes this knob ideal for a wide variety ofapplications.
3. Furnished with metal inserts for both blind and thru hole design.
1.06”0.50”
0.75”
2”
.oNtraPdaerhtdutS/tresnI
02-4/1 81-61/5 61/8-3
epyT
elohurhT H52-04K H13-04K H73-04KdnilB B52-04K B13-04K B73-04K
dutS"2/1 5052-04K 5013-04K -dutS"1 0152-04K 0113-04K 0173-04K
dutS"4/1-1 - - 2173-04K
1. Large, rugged knobs perfect for applications requiring high torque orheavy duty clamping.
2. Molded of tough thermoplastic, four times more impact resistant thanphenolic knobs.
2.50”
1.00”
0.50”1.13”
K80 Star Knobs Thermoplastic
K40 4-Prong Knobs Thermoplastic
K30 3-Prong Knobs Thermoplastic
.oNtraPdaerhtdutS/tresnI
02-4/1 81-61/5 61-8/3
epyTelohurhT H52-08K H13-08K H73-08K
dutS"1 0152-08K 0113-08K 0173-08KdutS"2/1-1 5152-08K 5113-08K 5173-08K
1. One of the most versatile designs in our product line.2. Attractive satin finish, and completely rounded edges.3. The thermoplastic construction makes it tough enough for industrial
applications, yet the smooth lines are attractive enough for consumerapplications as well.
Material: ThermoplasticFinish: Black Satin
Material: ThermoplasticFinish: Black Satin
Material: ThermoplasticFinish: Black Satin
Material: ThermoplasticFinish: Black Satin
0.48”1.06”
1.75”
0.75”
2.25”
0.61
”
0.96”
0.13”