industrial enginering

7/28/2019 Industrial Enginering

1/13

Aim of presentation

The aim of our presentation is to appraise t he Management what we have learned

from the Dynagro as well as from Mr. Patrick. Those thing we are going to

implement in the Texereurop (BD) Ltd.

Sequence of Presentation:

o What is productivity?

o Problem you may face.


2/13

o A simple operation

o Work analysis t techniques.

o Out commitment.

o Question and answer season.

What is productivity?

In general ratio of output to input

Productivity = Out pur/Input 100

Problem you may ace in productivity :

* Productivity

- Low output, low labour utilisation

- Targets not met, poor efficiency

- Inefficient style change

- Low moral, high labour turnover and excessive training costs

- Low return on capital investment


3/13

Communication buildup between dept.

Meet the buyer requirements.

Meet the buyer requirements.

Function of I.E-

Analysis of the work.

Develop the method

Measure the work

Set the SMV & Target

Cost per minute

Develop system & Procedure

Continuous follow-up

What is method study?

o Is the dystemic recoding & critical examination of existing of proposed of way doing


4/13

o Designed to establish the time for a qualified worker.

o Carry out a specified job at a defined level of performance.

Purpose of work measurement:

o Work measurement is concerned with investigating, redacting and subsequently

elimination ineffective time.

Work measurement techniques:

Time Study.

Production Study

Potential Study

PMTS


5/13

What is production study?

o To prove the capacity.

o To find out non-productive time

o To clear the bottle neck

What is potential study?

o To see current picture of the line quickly

o Take the immediate decision about the line

o To balance the line smoothly


6/13


7/13


8/13

Shoulder joint

Sleeve attach

Neck attach

Side seam

Bottom hem

50 100 150 200 250 300

185

140

300


9/13


10/13


11/13

A SIMPLE OPERATION

Total 344 TMU

SMV 0.189

Note smv = TMU/ 2000+Allow%

ACODE DESCRIPTION TMU

MG2T Match & Get 2 Parts Together 76

FOOT Position To Needle 38

MS1A Sew To Hold 17

AM2P Align Edges 61

S34LA Sew 34cm IN 1 Burst 79

TCUT Cut Threads with Scissors 50

AS1H Put Aside with 1 Hand 23


12/13

Work Study / E.E

Work measurement Method Study

Higher Productivity


13/13

Our Commitment

Implementing the method

Increase the productivity

Reduce the helper

Set the line target

Achieve the target with quality

Ship the goods on time with full qty

Ensure the maximum utilization of existing resources.

Ensure discipline at Texeurop (BD) Ltd.

industrial enginering

Documents