industrial connectivity products (available with 7/8-16 un ... · e1 turck inc. 3000 campus drive...

110
E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com TURCK Industrial Connectivity Products (Available with 7/8-16 UN threads, 1-16 UN threads or 1 1/8-16 UN threads) Molded cordsets Receptacles Splitters (Section L) Junction Boxes (Section M) Field wireables Conduit adapters Accessories Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Upload: others

Post on 27-Sep-2020

5 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

(Available with 7/8-16 UN threads, 1-16 UN threads or 1 1/8-16 UN threads)• Molded cordsets

• Receptacles

• Splitters (Section L)

• Junction Boxes (Section M)

• Field wireables

• Conduit adapters

• Accessories

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 2: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E2

IndustrialAutomation

min

ifast

minifast ® Selection Guide

Standard Applications Straight Female Right Angle Female Straight Male Right Angle Male

"B" Style - 1" Thread 16 AWG 16 AWG 16 AWG 16 AWG

Page E37 - E38 E39 - E40 E41 - E42 E43 - E44

Standard Applications Straight Male Right Angle Male

Style - 7/8" Thread 18 AWG 16 AWG 18 AWG 16 AWG

Page E17 - E20 E31 - E33 E21 - E24 E34 - E36

Standard Applications Straight Female Right Angle Female

Style - 7/8" Thread 18 AWG 16 AWG 18 AWG 16 AWG

Page E9 - E12 E25 - E27 E13 - E16 E28 - E30

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 3: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E3 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Standard Applications Straight Female Straight Male

Style Smooth Body

Page E55 E56

Standard Applications Straight Female Right Angle Female Straight Male Right Angle Male

"C" Style - 1-1/8"Thread 16 AWG 16 AWG 16 AWG 16 AWG

Page E45 - E46 E47 - E48 E49 - E50 E51 - E52

Standard Applications Straight Female Straight Male

Style Armored Cable

Page E53 E54

minifast ® Selection Guide

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 4: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E4

IndustrialAutomation

min

ifast

minifast ® Selection Guide

Tees/Accessories

Page E103 - E110

Cordsets Coil Cords

Page E57 - E58

Cordsets Extensions

Page E7 - E8

Receptacles

Page E59 - E93

Conduit Adapters

Page E101 - E102

Field Wireables

Page E95 - E100

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 5: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E5 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

20 2/18 AWG BN, BU26 2/16 AWG BK, WH28 2/18 AWG BK, WH30 3/18 AWG BN, BU, GN/YE31 3/18 AWG BN, BU, BK35 3/16 AWG RD/BK, RD/WH, GN36 3/16 AWG BK, WH, GN38 3/18 AWG BK, WH, GN311 3/18 AWG RD/BK, RD/WH, GN40 4/18 AWG BN, BU, BK, WH46 4/16 AWG BK, WH, RD, GN47 4/16 AWG BN, WH, BU, BK48 4/18 AWG BK, WH, RD, GN50 5/18 AWG BN, BU, BK, WH, GN/YE55 5/16 AWG RD/BK, RD/WH, RD/BU, RD/OG, GN56 5/16 AWG BK, WH, RD, OG, GN58 5/18 AWG BK, WH, RD, OG, GN511 5/18 AWG RD/BK, RD/WH, RD/BU, RD/OG, GN61 6/18 AWG BN, BU, WH, Gy, YE, GN66 6/16 AWG BK, WH, RD, OG, BU, GN68 6/18 AWG BK, WH, RD, OG, BU, GN6B6 6/16 AWG OG, BU, BK, WH, RD, GN76 7/16 AWG WH/BK, WH, BK, RD, OG, BU, GN86 8/16 AWG OG, BU, WH/BK, BK, WH, RD, GN, RD/BK96 9/16 AWG OG, BU, RD/BK, GN/BK, WH, RD, GN, WH/BK, BK106 10/16 AWG OG, BU, WH/BK, RD/BK, GN/BK, OG/BK, RD, GN, BK, WH126 12/16 AWG OG, BU, WH/BK, RD/BK, GN/BK, OG/BK, BU/BK, BK/WH, GN,RD, WH, BK__A Metal Clad Cable (18 straight only)__D Smooth Plug Body (16 AWG straight only)

Number of Wires / AWG / Conductor Colors

Length in Meters

(Blank) = PVC Jacket/S90 = PUR Jacket/S90-SP = PUR Coil CoRD/S101 =flexlife-10 - High Flex Cable/S529 =Yellow PUR Jacket, Braided Shield, PVC Inner

Jacket/S600 = CPE, Rubber Jacket/S824 =Yellow PLTC/S1587 = TPE, weldlife/XOR/S620 = Irradiated PVC, Weld Resistance/S .. = Consult Factory, Special/CS .. = Consult Factory, Special

* Male Connector Listed 1st, Female Connector 2ndExample: RSM RKM 40-2M

Insertion Point of Extension Cable 2nd Prefix*

R = StraightW = Right Angle

minifast

K = Female Connector, Female ThreadsS = Male Connector, Male ThreadsY = Male Connector, Female Threads

Gender

(Blank) = NylonM = Nickel Plated BrassV = Stainless Steel

Coupling Nut Material

R K M 30 - 4M /S..

minifast ® Cordset Part Number Key

Note:Part Number Keys are to assist in IDENTIFICATION ONLY. Consult Factory for catalog items not identified.

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 6: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E6

IndustrialAutomation

min

ifast

R K F V 30 - 1M /NPT /S..

K = Female Connector, Female ThreadsS = Male Connector, Male ThreadsX = Female Connector, Male Threads

Gender

Designator for Receptacle

(Blank) = Front MountP = Back Panel Mount

Mounting Style

(Blank) = Anodized AluminumK = NylonV = Stainless Steel

MaterialFirst Digit Represents Number of Wires20, 26, 28, 30, 31, 35, 36, 38, 311, 40, 46, 48, 50, 55, 56, 58, 511,61, 66, 68For minifast "B" and "C" Style:6B6 =6 wires76 = 7 wires86 = 8 wire96 = 9 wires106 =10 wires126 =12 wires

Number of Wires

minifast

(Blank) = 1/2-14 NPSM Threads/NPT =1/2-14 NPT Threads/14.5/NPT = 1/2-14 NPT Threads (B & C style)/14.75/NPT = 3/4-14 NPT Threads

Connection Thread

/S849 =22AWG/S .. = Consult Factory, Special/CS .. = Consult Factory, Special

(Blank) = Leads or PCB PinsL = Solder Cup

Connection Type

minifast ® Receptacle Part Number Key

B S 4 2 3 1 - 0 / 9

(Blank) = FemaleS = Male

Gender

1 = Standard

Termination

4 = minifast

Style

1 = Straight2 = Right Angle

Housing Style3 = 34 = 45 = 5

Number of Pins

0 = No Cable

Cable Option

B = Field Wireable

Field Wireable9 = PG 9 Cable Opening13.5 = PG 13.5 Cable Opening16 = PG 16 Cable Opening

Cable Opening

minifast Field Wireable Part Number Key

(Blank) = Solder Cup__M = Lead Length in MetersPCB = PCB Pins

Connection Type

Note:Part Number Keys are to assist in IDENTIFICATION ONLY. Consult Factory for catalog items not identified.

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 7: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E7 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

20 2/18 AWG BN, BU26 2/16 AWG BK, WH28 2/18 AWG BK, WH30 3/18 AWG BN, BU, GN/YE31 3/18 AWG BN, BU, BK35 3/16 AWG RD/BK, RD/WH, GN36 3/16 AWG BK, WH, GN38 3/18 AWG BK, WH, GN31 1 3/18 AWG RD/BK, RD/WH, GN40 4/18 AWG BN, BU, BK, WH46 4/16 AWG BK, WH, RD, GN47 4/16 AWG BN, WH, BU, BK48 4/18 AWG BK, WH, RD, GN50 5/18 AWG BN, BU, BK, WH, GN/YE55 5/16 AWG RD/BK, RD/WH, RD/BU, RD/OG, GN56 5/16 AWG BK, WH, RD, OG, GN58 5/18 AWG BK, WH, RD, OG, GN511 5/18 AWG RD/BK, RD/WH, RD/BU, RD/OG, GN61 6/18 AWG BN, BU, WH, Gy, YE, GN66 6/16 AWG BK, WH, RD, OG, BU, GN68 6/18 AWG BK, WH, RD, OG, BU, GN6B6 6/16 AWG OG, BU, BK, WH, RD, GN76 7/16 AWG WH/BK, WH, BK, RD, OG, BU, GN86 8/16 AWG OG, BU, WH/BK, BK, WH, RD, GN, RD/BK96 9/16 AWG OG, BU, RD/BK, GN/BK, WH, RD, GN, WH/BK, BK106 10/16 AWG OG, BU, WH/BK, RD/BK, GN/BK, OG/BK, RD, GN,

BK, WH126 12/16 AWG OG, BU, WH/BK, RD/BK, GN/BK, OG/BK, BU/BK,

BK/WH, GN, RD, WH, BK__A Metal Clad Cable (8 straight only)__D Smooth Plug Body (16 AWG straight only)

Number of Wires / AWG / Conductor Colors

Length in Meters

(Blank) = PVC Jacket/S90 = PUR Jacket/S90-SP = PUR Coil CoRD/S101 =flexlife-10 - High Flex Cable/S529 =Yellow PUR Jacket, Braided Shield, PVC

Inner Jacket/S600 = CPE, Rubber Jacket/S824 =Yellow PLTC/S1587 = TPE, weldlife/XOR/S620= Irradiated PVC, Weld Resistance/S .. = Consult Factory, Special/CS .. = Consult Factory, Special

* Male Connector Listed 1st, Female Connector 2ndExample: RSM RKM 40-2M

Insertion Point of Extension Cable 2nd Prefix*

R = StraightW = Right Angle

minifast

K = Female Connector, Female ThreadsS = Male Connector, Male ThreadsY = Male Connector, Female Threads

Gender

(Blank) = NylonM = Nickel Plated BrassV = Stainless Steel

Coupling Nut Material

R S M R K M 30 - 4M /S..

minifast ® Extension Cordset Part Number Key

Note:Part Number Keys are to assist in IDENTIFICATION ONLY. Consult Factory for catalog items not identified.

R S M R K M 30 - 4M /S..

Example:

R K M 4.4T - 2 - R S C 40

Example:

Note: Hybrid connector extensions also available. Consult factory.

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 8: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E8

IndustrialAutomation

min

ifast

Other Extension Examples:

minifast ® Extension Cordset Part Number Key

W S M W K M 30 - 4M /S..

R S M W K M 30 - 4M /S..

W S M R K M 30 - 4M /S..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 9: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E9 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Housing Style Part Number Cable Features Pinout

RKM 20- *M

AWM PVC Yellow2x18 AWG105°C7.3 mm ODCable #RF50511-*M†

flexlife ® 1. BN2. BU

RKM 30-*M

AWM PVC Yellow3x18 AWG105°C7.3 mm ODCable #RF50512-*M†

flexlife

1. GN/YE2. BN3. BU

RKM 30-*M/S90

AWM PUR Yellow3x18 AWG105°C7.3 mm ODCable #RF50545-*M†

Cut AbrasionImmune

RKM 30-*M/S101

AWM TPE Yellow3x18 AWG105°C7.3 mm ODCable #RF50545-*M†

flexlife-10, highflex over 10million cycles

RKM 311-*M

AWM PVC Yellow3x18 AWG105°C7.2 mm ODCable #RF51173-*M†

flexlife

1. GN2. RD/BK3. RD/WH

RKM 311-*M/S600

SJOOW CPE, Yellow3x18 AWG105°C8.0 mm ODCable #RF50658-*M†

Weld FlashImmune, FlameImmune

RKM 311-*M/XOR/S620

AWM Irradiated PVCYellow3x18 AWG80°C, 5.7 mm ODCable #RF04159-*M†

Weld Resistance1. GN2. RD3. RD/WH

RKM 31-*M

AWM PVC Yellow3x18 AWG105°C, 7.3 mm ODCable #RF50513-*M†

flexlife

1. BK2. BN3. BU

RKM 31-*M/S600

SJOOW CPE Yellow3x18 AWG105°C, 8.0 mm ODCable #RF50654-*M†

Weld FlashImmune, FlameImmune

RKM 31-*M/S759

AWM PVC Grey3x22 AWG80°C, 5.2 mm ODCable #RF04106-*M†

Braided Shield

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RKM .."; "RK .." indicates nylon and "RKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

• Straight Female Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 300 V, 9 A

2 and 3-Wire minifast ® Cordsets, Standard

RKM ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 10: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E10

IndustrialAutomation

Cor

dset

s

Housing Style Part Number Cable Features Pinout

RKM 31-*M/S816

AWM PVC Yellow3x20 AWG105°C, 5.2 mm ODCable #RF50674-*M†

flexlife1. BK2. BN3. BU

RKM 40-*M

AWM PVC Yellow4x18 AWG105°C7.3 mm ODCable #RF50548-*M†

flexlife ®

1. BN2. WH3. BU4. BK

RKM 40-*M/S90

AWM PUR Yellow4x18 AWG105°C7.3 mm ODCable #RF50544-*M†

Cut/AbrasionImmune

RKM 40-*M/S101

AWM TPE Yellow4x18 AWG105°C7.2 mm ODCable #RF50968-*M†

flexlife-10, HighFlex - Over 10million cycles

RKM 40-*M/S529

PUR Yellow4x20 AWG105°C5.7 mm ODCable #RF50526-*M†

Cut/AbrasionImmune,BraidedMechanicalShield

RKM 40-*M/S600

SJOOW CPE Yellow4x18 AWG105°C8.5 mm ODCable #RF50644-*M†

Weld FlashImmune, FlameImmune

RKM 40-*M/S824

ITC PLTC PVC Yellow4x18 AWG105°C7.2 mm ODCable #RF50844-*M†

flexlife

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RKM .."; "RK .." indicates nylon and "RKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

3 and 4-Wire minifast ® Cordsets, Standard

RKM ..

• Straight Female Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 300 V, 9 A

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 11: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E11 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Housing Style Part Number Cable Features Pinout

RKM 50-*M

AWM PVC Yellow5x18 AWG105°C7.3 mm ODCable #RF50549-*M†

flexlife ®

1. BK2. BU3. GN/YE4. BN5. WH

RKM 50-*M/S90

AWM PUR Yellow5x18 AWG105°C7.3 mm ODCable #RF50751-*M†

Cut/AbrasionImmune

RKM 50-*M/S101

AWM TPE Yellow5x18 AWG105°C7.2 mm ODCable #RF51174-*M†

flexlife-10, highflex over 10million cycles

RKM 50-*M/S1551

AWM PVC Yellow5x18 AWG105°C7.3 mm ODCable #RF50578-*M†

Yellowconductorinstead ofGreen/Yellow

1. BK2. BU3. YE4. BN5. WH

RKM 511-*M

AWM PVC Yellow5x18 AWG105°C7.3 mm ODCable #RF50521-*M†

flexlife1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BK

RKM 511-*M/S600

SJOOW CPE Yellow5x18 AWG105°C9.2 mm ODCable #RF50659-*M†

Weld FlashImmune, FlameImmune

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RKM .."; "RK .." indicates nylon and "RKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

5-Wire minifast ® Cordsets, Standard

RKM ..

• Straight Female Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 300 V, 9 A

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 12: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E12

IndustrialAutomation

Cor

dset

s

Housing Style Part Number Cable Features Pinout

RKM 60-*M/S90/S853

AWM PUR Yellow3x18 AWG105°C7.3 mm ODCable #RF50545-*M†

6-pin styleconnector with3 conductor

1. BN2. N/C3. GN/YE4. N/C5. BU6. N/C

RKM 61-*M

AWM PVC Yellow6x18 AWG105°C7.3 mm ODCable #RF50575-*M†

flexlife ®

1. GN2. WH3. BU4. Gy5. YE6. BNRKM 61-*M/S739

ITC PLTC PVC Yellow7x18 AWG105°C7.3 mm ODCable #RF50637-*M†

Shielded cablewith drain wire,not connected atplug.

RKM 61-*M/S763

AWM PVC Black6x18 AWG105°C7.3 mm ODCable #RF50551-*M†

Shielded cablewith drain wire,not connected atplug

1. BU2. WH3. BK4. GN5. RD6. OGRKM 61-*M/S1052/S1587

AWM TPE Grey6x18 AWG105°C7.2 mm ODCable #RF51274-*M†

weldlife, WeldFlash Immune

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RKM .."; "RK .." indicates nylon and "RKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

6-Wire minifast ® Cordsets, Standard

RKM ..

• Straight Female Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 300 V, 9 A

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 13: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E13 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Housing Style Part Number Cable Features Pinout

WKM 20- *M

AWM PVC Yellow2x18 AWG105°C7.3 mm ODCable #RF50511-*M†

flexlife ® 1. BN2. BU

WKM 30-*M

AWM PVC Yellow3x18 AWG105°C7.3 mm ODCable #RF50512-*M†

flexlife

1. GN/YE2. BN3. BU

WKM 30-*M/S90

AWM PUR Yellow3x18 AWG105°C7.3 mm ODCable #RF50545-*M†

Cut AbrasionImmune

WKM 30-*M/S101

AWM TPE Yellow3x18 AWG105°C7.2 mm ODCable #RF51173-*M†

flexlife-10, highflex over 10million cycles

WKM 311-*M

AWM PVC Yellow3x18 AWG105°C7.3 mm ODCable #RF50520-*M†

flexlife

1. GN2. RD/BK3. RD/WH

WKM 311-*M/S600

SJOOW CPE, Yellow3x18 AWG105°C8.0 mm ODCable #RF50658-*M†

Weld FlashImmune, FlameImmune

WKM 31-*M

AWM PVC Yellow3x18 AWG105°C7.3 mm ODCable #RF50513-*M†

flexlife

1. BK2. BN3. BU

WKM 31-*M/S600

SJOOW CPE Yellow3x18 AWG105°C8.0 mm ODCable #RF50654-*M†

Weld FlashImmune, FlameImmune

WKM 31-*M/S759

AWM PVC Grey3x22 AWG80°C5.2 mm ODCable #RF04106-*M†

Braided Shield

WKM 31-*M/S816

AWM PVC Yellow3x20 AWG105°C5.2 mm ODCable #RF50674-*M†

flexlife

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WKM .."; "WK .." indicates nylon and "WKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

2 and 3-Wire minifast ® Cordsets, Standard

WKM ..

• Right Angle Female Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 300 V, 9 A

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 14: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E14

IndustrialAutomation

Cor

dset

s

Housing Style Part Number Cable Features Pinout

WKM 311-*M/XOR/S620

AWM Irradiated PVCYellow, 3x18 AWG80°C5.7 mm ODCable #RF04159-*M†

Weld Resistance1. GN2. RD3. RD/WH

WKM 40-*M

AWM PVC Yellow4x18 AWG105°C7.3 mm ODCable #RF50548-*M†

flexlife ®

1. BN2. WH3. BU4. BK

WKM 40-*M/S90

AWM PUR Yellow4x18 AWG105°C7.3 mm ODCable #RF50544-*M†

Cut/AbrasionImmune

WKM 40-*M/S101

AWM TPE Yellow4x18 AWG105°C7.2 mm ODCable #RF50968-*M†

flexlife-10, HighFlex - Over 10million cycles

WKM 40-*M/S529

PUR Yellow4x20 AWG105°C5.7 mm ODCable #RF50526-*M†

Cut/AbrasionImmune,BraidedMechanicalShield

WKM 40-*M/S600

SJOOW CPE Yellow4x18 AWG105°C8.5 mm ODCable #RF50644-*M†

Weld FlashImmune, FlameImmune

WKM 40-*M/S824

ITC PLTC PVC Yellow4x18 AWG105°C7.2 mm ODCable #RF50844-*M†

flexlife

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WKM .."; "WK .." indicates nylon and "WKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

3 and 4-Wire minifast ® Cordsets, Standard

WKM ..

• Right Angle Female Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 300 V, 9 A

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 15: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E15 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Housing Style Part Number Cable Features Pinout

WKM 50-*M

AWM PVC Yellow5x18 AWG105°C7.3 mm ODCable #RF50549-*M†

flexlife ®

1. BK2. BU3. GN/YE4. BN5. WH

WKM 50-*M/S90

AWM PUR Yellow5x18 AWG105°C7.3 mm ODCable #RF50751-*M†

Cut/AbrasionImmune

WKM 50-*M/S101

AWM TPE Yellow5x18 AWG105°C7.2 mm ODCable #RF51174-*M†

flexlife-10, highflex over 10million cycles

WKM 50-*M/S1551

AWM PVC Yellow5x18 AWG105°C7.3 mm ODCable #RF50578-*M†

Yellowconductorinstead ofGreen/Yellow

1. BK2. BU3. YE4. BN5. WH

WKM 511-*M

AWM PVC Yellow5x18 AWG105°C7.3 mm ODCable #RF50521-*M†

flexlife1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BK

WKM 511-*M/S600

SJOOW CPE Yellow5x18 AWG105°C9.2 mm ODCable #RF50659-*M†

Weld FlashImmune, FlameImmune

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WKM .."; "WK .." indicates nylon and "WKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

5-Wire minifast ® Cordsets, Standard

WKM ..

• Right Angle Female Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 300 V, 9 A

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 16: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E16

IndustrialAutomation

Cor

dset

s

Housing Style Part Number Cable Features Pinout

WKM 60-*M/S90/S853

AWM PUR Yellow3x18 AWG105°C7.3 mm ODCable #RF50545-*M†

6 pin styleconnector with3 conductor

1. BN2. N/C3. GN/YE4. N/C5. BU6. N/C

WKM 61-*M

AWM PVC Yellow6x18 AWG105°C7.3 mm ODCable #RF50575-*M†

flexlife ®

1. GN2. WH3. BU4. Gy5. YE6. BNWKM 61-*M/S739

ITC PLTC PVC Yellow7x18 AWG105°C7.3 mm ODCable #RF50637-*M†

Shielded cablewith drain wire,not connected atplug

WKM 61-*M/S763

AWM PVC Black6x18 AWG105°C7.3 mm ODCable #RF50551-*M†

Shielded Cable,with drain wirenot connected atplug

1. BU2. WH3. BK4. GN5. RD6. OGWKM 61-*M/S1052/S1587

AWM TPE Grey6x18 AWG105°C7.2 mm ODCable #RF51274-*M†

weldlife, WeldFlash Immune

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WKM .."; "WK .." indicates nylon and "WKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

6-Wire minifast ® Cordsets, Standard

WKM ..

• Right Angle Female Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 300 V, 9 A

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 17: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E17 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Housing Style Part Number Cable Features Pinout

RSM 20- *M

AWM PVC Yellow2x18 AWG105°C7.3 mm ODCable #RF50511-*M†

flexlife ® 1. BN2. BU

RSM 30-*M

AWM PVC Yellow3x18 AWG105°C7.3 mm ODCable #RF50512-*M†

flexlife

1. GN/YE2. BN3. BU

RSM 30-*M/S90

AWM PUR Yellow3x18 AWG105°C7.3 mm ODCable #RF50545-*M†

Cut AbrasionImmune

RSM 30-*M/S101

AWM TPE Yellow3x18 AWG105°C7.2 mm ODCable #RF51173-*M†

flexlife-10, highflex over 10million cycles

RSM 311-*M

AWM PVC Yellow3x18 AWG105°C7.3 mm ODCable #RF50520-*M†

flexlife

1. GN2. RD/BK3. RD/WH

RSM 311-*M/S600

SJOOW CPE, Yellow3x18 AWG105°C8.0 mm ODCable #RF50658-*M†

Weld FlashImmune, FlameImmune

RSM 311-*M/XOR/S620

AWM Irradiated PVCYellow, 3x18 AWG80°C5.7 mm ODCable #RF04159-*M†

Weld Resistance1. GN2. RD3. RD/WH

RSM 31-*M

AWM PVC Yellow3x18 AWG105°C7.3 mm ODCable #RF50513-*M†

flexlife

1. BK2. BN3. BU

RSM 31-*M/S600

SJOOW CPE Yellow3x18 AWG105°C8.0 mm ODCable #RF50654-*M†

Weld FlashImmune, FlameImmune

RSM 31-*M/S759

AWM PVC Grey3x22 AWG80°C5.2 mm ODCable #RF04106-*M†

Braided Shield

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RSM .."; "RS .." indicates nylon and "RSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

2 and 3-Wire minifast ® Cordsets, Standard

• Straight Male Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 300 V, 9 A

RSM ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 18: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E18

IndustrialAutomation

Cor

dset

s

Housing Style Part Number Cable Features Pinout

RSM 31-*M/S816

AWM PVC Yellow3x20 AWG105°C5.2 mm ODCable #RF50674-*M†

flexlife1. BK2. BN3. BU

RSM 40-*M

AWM PVC Yellow4x18 AWG105°C7.3 mm ODCable #RF50548-*M†

flexlife ®

1. BN2. WH3. BU4. BK

RSM 40-*M/S90

AWM PUR Yellow4x18 AWG105°C7.3 mm ODCable #RF50544-*M†

Cut/AbrasionImmune

RSM 40-*M/S101

AWM TPE Yellow4x18 AWG105°C7.2 mm ODCable #RF50968-*M†

flexlife-10, HighFlex - Over 10million cycles

RSM 40-*M/S529

PUR Yellow4x20 AWG105°C5.7 mm ODCable #RF50526-*M†

Cut/AbrasionImmune,BraidedMechanicalShield

RSM 40-*M/S600

SJOOW CPE Yellow4x18 AWG105°C8.5 mm ODCable #RF50644-*M†

Weld FlashImmune, FlameImmune

RSM 40-*M/S824

ITC PLTC PVC Yellow4x18 AWG105°C7.2 mm ODCable #RF50844-*M†

flexlife

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RSM .."; "RS .." indicates nylon and "RSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

3 and 4-Wire minifast ® Cordsets, Standard

• Straight Male Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 300 V, 9 A

RSM ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 19: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E19 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Housing Style Part Number Cable Features Pinout

RSM 50-*M

AWM PVC Yellow5x18 AWG105°C7.3 mm ODCable #RF50549-*M†

flexlife ®

1. BK2. BU3. GN/YE4. BN5. WH

RSM 50-*M/S90

AWM PUR Yellow5x18 AWG105°C7.3 mm ODCable #RF50751-*M†

Cut/AbrasionImmune

RSM 50-*M/S101

AWM TPE Yellow5x18 AWG105°C7.2 mm ODCable #RF51174-*M†

flexlife-10, highflex over 10million cycles

RSM 50-*M/S1551

AWM PVC Yellow5x18 AWG105°C7.3 mm ODCable #RF50578-*M†

Yellowconductorinstead ofGreen/Yellow

1. BK2. BU3. YE4. BN5. WH

RSM 511-*M

AWM PVC Yellow5x18 AWG105°C7.3 mm ODCable #RF50521-*M†

flexlife1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BK

RSM 511-*M/S600

SJOOW CPE Yellow5x18 AWG105°C9.2 mm ODCable #RF50659-*M†

Weld FlashImmune, FlameImmune

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RSM .."; "RS .." indicates nylon and "RSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

5-Wire minifast ® Cordsets, Standard

• Straight Male Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 300 V, 9 A

RSM ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 20: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E20

IndustrialAutomation

Cor

dset

s

6-Wire minifast ® Cordsets, Standard

Housing Style Part Number Cable Features Pinout

RSM 60-*M/S90/S853

AWM PUR Yellow3x18 AWG105°C7.3 mm ODCable #RF50545-*M†

6 pin styleconnector with3 conductor

1. BN2. N/C3. GN/YE4. N/C5. BU6. N/C

RSM 61-*M

AWM PVC Yellow6x18 AWG105°C7.3 mm ODCable #RF50575-*M†

flexlife ®

1. GN2. WH3. BU4. Gy5. YE6. BNRSM 61-*M/S739

ITC PLTC PVC Yellow7x18 AWG105°C7.3 mm ODCable #RF50637-*M†

Shielded cablewith drain wire,not connected atplug.

RSM 61-*M/S763

AWM PVC Black6x18 AWG105°C7.3 mm ODCable #RF50551-*M†

Shielded Cable,with drain wirenot connected atplug

1. BU2. WH3. BK4. GN5. RD6. OGRSM 61-*M/S1052/S1587

AWM TPE Grey6x18 AWG105°C7.2 mm ODCable #RF51274-*M†

weldlife, WeldFlash Immune

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RSM .."; "RS .." indicates nylon and "RSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

• Straight Male Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 300 V, 9 A

RSM ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 21: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E21 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Housing Style Part Number Cable Features Pinout

WSM 20- *M

AWM PVC Yellow2x18 AWG105°C7.3 mm ODCable #RF50511-*M†

flexlife ® 1. BN2. BU

WSM 30-*M

AWM PVC Yellow3x18 AWG105°C7.3 mm ODCable #RF50512-*M†

flexlife

1. GN/YE2. BN3. BU

WSM 30-*M/S90

AWM PUR Yellow3x18 AWG105°C7.3 mm ODCable #RF50545-*M†

Cut AbrasionImmune

WSM 30-*M/S101

AWM TPE Yellow3x18 AWG105°C7.2 mm ODCable #RF51173-*M†

flexlife-10, highflex over 10million cycles

WSM 311-*M

AWM PVC Yellow3x18 AWG105°C7.3 mm ODCable #RF50520-*M†

flexlife

1. GN2. RD/BK3. RD/WH

WSM 311-*M/S600

SJOOW CPE, Yellow3x18 AWG105°C8.0 mm ODCable #RF50658-*M†

Weld FlashImmune, FlameImmune

WSM 31-*M

AWM PVC Yellow3x18 AWG105°C7.3 mm ODCable #RF50513-*M†

flexlife

1. BK2. BN3. BU

WSM 31-*M/S600

SJOOW CPE Yellow3x18 AWG105°C8.0 mm ODCable #RF50654-*M†

Weld FlashImmune, FlameImmune

WSM 31-*M/S759

AWM PVC Grey3x22 AWG80°C5.2 mm ODCable #RF04106-*M†

Braided Shield

WSM 31-*M/S816

AWM PVC Yellow3x20 AWG105°C5.2 mm ODCable #RF50674-*M†

flexlife

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WSM .."; "WS .." indicates nylon and "WSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

2 and 3-Wire minifast ® Cordsets, Standard

• Right Angle Male Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 300 V, 9 A

WSM ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 22: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E22

IndustrialAutomation

Cor

dset

s

Housing Style Part Number Cable Features Pinout

WSM 311-*M/XOR/S620

AWM Irradiated PVCYellow, 3x18 AWG80°C5.7 mm ODCable #RF04159-*M†

Weld Resistance1. GN2. RD3. RD/WH

WSM 40-*M

AWM PVC Yellow4x18 AWG105°C7.3 mm ODCable #RF50548-*M†

flexlife ®

1. BN2. WH3. BU4. BK

WSM 40-*M/S90

AWM PUR Yellow4x18 AWG105°C7.3 mm ODCable #RF50544-*M†

Cut/AbrasionImmune

WSM 40-*M/S101

AWM TPE Yellow4x18 AWG105° C7.2 mm ODCable #RF50968-*M†

flexlife-10, HighFlex - Over 10million cycles

WSM 40-*M/S529

PUR Yellow4x20 AWG105°C5.7 mm ODCable #RF50526-*M†

Cut/AbrasionImmune,BraidedMechanicalShield

WSM 40-*M/S600

SJOOW CPE Yellow4x18 AWG105°C8.5 mm ODCable #RF50644-*M†

Weld FlashImmune, FlameImmune

WSM 40-*M/S824

ITC PLTC PVC Yellow4x18 AWG105°C7.2 mm ODCable #RF50844-*M†

flexlife

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WSM .."; "WS .." indicates nylon and "WSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

4-Wire minifast ® Cordsets, Standard

• Right Angle Male Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 300 V, 9 A

WSM ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 23: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E23 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Housing Style Part Number Cable Features Pinout

WSM 50-*M

AWM PVC Yellow5x18 AWG105°C7.3 mm ODCable #RF50549-*M†

flexlife ®

1. BK2. BU3. GN/YE4. BN5. WH

WSM 50-*M/S90

AWM PUR Yellow5x18 AWG105°C7.3 mm ODCable #RF50751-*M†

Cut/AbrasionImmune

WSM 50-*M/S101

AWM TPE Yellow5x18 AWG105°C7.2 mm ODCable #RF51174-*M†

flexlife-10, highflex over 10million cycles

WSM 50-*M/S1551

AWM PVC Yellow5x18 AWG105°C7.3 mm ODCable #RF50578-*M†

Yellowconductorinstead ofGreen/Yellow

1. BK2. BU3. YE4. BN5. WH

WSM 511-*M

AWM PVC Yellow5x18 AWG105°C7.3 mm ODCable #RF50521-*M†

flexlife1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BK

WSM 511-*M/S600

SJOOW CPE Yellow5x18 AWG105°C9.2 mm ODCable #RF50659-*M†

Weld FlashImmune, FlameImmune

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WSM .."; "WS .." indicates nylon and "WSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

5-Wire minifast ® Cordsets, Standard

• Right Angle Male Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 300 V, 9 A

WSM ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 24: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E24

IndustrialAutomation

Cor

dset

s

Housing Style Part Number Cable Features Pinout

WSM 60-*M/S90/S853

AWM PUR Yellow3x18 AWG105°C7.3 mm ODCable #RF50545-*M†

6 pin styleconnector with3 conductor

1. BN2. N/C3. GN/YE4. N/C5. BU6. N/C

WSM 61-*M

AWM PVC Yellow6x18 AWG105°C7.3 mm ODCable #RF50575-*M†

flexlife ®

1. GN2. WH3. BU4. Gy5. YE6. BNWSM 61-*M/S739

ITC PLTC PVC Yellow7x18 AWG105°C7.3 mm ODCable #RF50637-*M†

Shielded cablewith drain wire,not connected atplug

WSM 61-*M/S763

AWM PVC Black6x18 AWG105°C7.3 mm ODCable #RF50551-*M†

Shielded Cable,with drain wirenot connected atplug

1. BU2. WH3. BK4. GN5. RD6. OGWSM 61-*M/S1052/S1587

AWM TPE Grey6x18 AWG105°C7.2 mm ODCable #RF51274-*M†

weldlife, WeldFlash Immune

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WSM .."; "WS .." indicates nylon and "WSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

6-Wire minifast ® Cordsets, Standard

• Right Angle Male Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 300 V, 9 A

WSM ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 25: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E25 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

2, 3 and 4-Wire minifast ® Cordsets, Heavy Duty

Housing Style Part Number Cable Features Pinout

RKM 26-*M

STOW PVC Yellow2x16 AWG105°C10.4 mm ODCable #RF50561-*M†

flexlife ® 1. WH2. BK

RKM 35-*M

STOW PVC Yellow3x16 AWG105°C10.4 mm ODCable #RF50537-*M†

flexlife

1. GN2. RD/BK3. RD/WH

RKM 35-*M/S600

SOOW CPE Yellow3x16 AWG105°C10.3 mm ODCable #RF50596-*M†

Weld FlashImmune, FlameImmune

RKM 36-*M

STOW PVC Yellow3x16 AWG105°C10.4 mm ODCable #RF50536-*M†

flexlife1. GN2. BK3. WH

RKM 36D-*M/S1062

STOW PVC Yellow3x16 AWG105° C10.4 mm ODCable #RF50536-*M†

flexlife ® Cable,PVC plug bodywith PVC contactcarriers

1. GN2. BK3. WH

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RKM .."; "RK .." indicates nylon and "RKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

RKM ..

• Straight Female Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 26: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E26

IndustrialAutomation

Cor

dset

s

2, 3 and 4-Wire minifast ® Cordsets, Heavy Duty

Housing Style Part Number Cable Features Pinout

RKM 46-*M

STOW PVC Yellow4x16 AWG105°C11 mm ODCable #RF50538-*M†

flexlife

1. BK2. WH3. RD4. GN

RKM 46-*M/S600

SOOW CPE Yellow4x16 AWG105°C11 mm ODCable #RF50595-*M†

Weld FlashImmune, FlameImmune

RKM 46-*M/S824

TC PVC Yellow4x16 AWG90°C9.6 mm ODCable #RF51220-*M†

Tray Rated

RKM 46D-*M/S1062

STOW PVC Yellow4x16 AWG105° C11 mm ODCable #RF50538-*M†

flexlife ® Cable,PVC plug bodywith PVC contactcarriers

RKM 47-*M

STOW PVC Yellow4x16 AWG105°C13.2 mm ODCable #RF50626-*M†

flexlife

1. BN2. WH3. BU4. BK

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RKM .."; "RK .." indicates nylon and "RKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

RKM ..

• Straight Female Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 27: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E27 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Housing Style Part Number Cable Features Pinout

RKM 55-*M

STOW PVC Yellow5x16 AWG105°C13.2 mm ODCable #RF50540-*M†

flexlife ®

1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BK

RKM 55-*M/S600

SOOW CPE Yellow5x16 AWG105°C13 mm ODCable #RF50597-*M†

Weld FlashImmune, FlameImmune

1. RD2. RD3. GN4. RD5. RD

RKM 56-*M

STOW PVC Yellow5x16 AWG105°C13.2 mm ODCable #RF50539-*M†

flexlife1. WH2. RD3. GN4. OG5. BK

RKM 56-*M/S1587

STOW TPE Yellow5x16 AWG105°C13.2 mm ODCable #RF51265-*M†

weldlife, WeldFlash Immune

RKM 56D-*M/S1062

STOW PVC Yellow5x16 AWG105° C13.2 mm ODCable #RF50539-*M†

flexlife ® Cable,PVC plug bodywith PVC contactcarriers

1. WH2. RD3. GN4. OG5. BK

RKM 66-*M

STOW PVC Yellow6x16 AWG105°C13.2 mm ODCable #RF50565-*M†

flexlife

1. WH2. RD3. GN4. OG5. BK6. BU

RKM 66D-*M/S1062

STOW PVC Yellow6x16 AWG105° C13.2 mm ODCable #RF50565-*M†

flexlife ® Cable,PVC plug bodywith PVC contactcarriers

1. WH2. RD3. GN4. OG5. BK6. BU

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RKM .."; "RK .." indicates nylon and "RKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

5 and 6-Wire minifast ® Cordsets, Heavy Duty

RKM ..

• Straight Female Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 28: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E28

IndustrialAutomation

Cor

dset

s

2, 3 and 4-Wire minifast ® Cordsets, Heavy Duty

Housing Style Part Number Cable Features Pinout

WKM 26-*M

STOW PVC Yellow2x16 AWG105°C10.4 mm ODCable #RF50561-*M†

flexlife ® 1. WH2. BK

WKM 35-*M

STOW PVC Yellow3x16 AWG105°C10.4 mm ODCable #RF50537-*M†

flexlife

1. GN2. RD/BK3. RD/WH

WKM 35-*M/S600

SOOW CPE Yellow3x16 AWG105°C10.3 mm ODCable #RF50596-*M†

Weld FlashImmune, FlameImmune

WKM 36-*M

STOW PVC Yellow3x16 AWG105°C10.4 mm ODCable #RF50536-*M†

flexlife

1. GN2. BK3. WH

WKM 36D-*M/S1062

STOW PVC Yellow3x16 AWG105° C10.4 mm ODCable #RF50536-*M†

flexlife ® Cable,PVC plug bodywith PVC contactcarriers

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WKM .."; "WK .." indicates nylon and "WKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

• Right Angle Female Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

WKM ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 29: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E29 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

2, 3 and 4-Wire minifast ® Cordsets, Heavy Duty

Housing Style Part Number Cable Features Pinout

WKM 46-*M

STOW PVC Yellow4x16 AWG105°C11 mm ODCable #RF50538-*M†

flexlife

1. BK2. WH3. RD4. GN

WKM 46-*M/S600

SOOW CPE Yellow4x16 AWG105°C11 mm ODCable #RF50595-*M†

Weld FlashImmune, FlameImmune

WKM 46-*M/S824

TC PVC Yellow4x16 AWG90°C9.6 mm ODCable #RF51220-*M†

Tray Rated

WKM 46D-*M/S1062

STOW PVC Yellow4x16 AWG105° C11 mm ODCable #RF50538-*M†

flexlife ® Cable,PVC plug bodywith PVC contactcarriers

WKM 47-*M

STOW PVC Yellow4x16 AWG105°C13.2 mm ODCable #RF50626-*M†

flexlife

1. BN2. WH3. BU4. BK

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WKM .."; "WK .." indicates nylon and "WKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

• Right Angle Female Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

WKM ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 30: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E30

IndustrialAutomation

Cor

dset

s

Housing Style Part Number Cable Features Pinout

WKM 55-*M

STOW PVC Yellow5x16 AWG105°C13.2 mm ODCable #RF50540-*M†

flexlife ®

1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BK

WKM 55-*M/S600

SOOW CPE Yellow5x16 AWG105°C13 mm ODCable #RF50597-*M†

Weld FlashImmune, FlameImmune

1. RD2. RD3. GN4. RD5. RD

WKM 56-*M

STOW PVC Yellow5x16 AWG105°C13.2 mm ODCable #RF50539-*M†

flexlife

1. WH2. RD3. GN4. OG5. BK

WKM 56-*M/S1587

STOW TPE Yellow5x16 AWG105°C13.2 mm ODCable #RF51265-*M†

weldlife, WeldFlash Immune

WKM 56D-*M/S1062

STOW PVC Yellow5x16 AWG105° C13.2 mm ODCable #RF50539-*M†

flexlife ® Cable,PVC plug bodywith PVC contactcarriers

WKM 66-*M

STOW PVC Yellow6x16 AWG105°C13.2 mm ODCable #RF50565-*M†

flexlife 1. WH2. RD3. GN4. OG5. BK6. BUWKM 66D-*M/S1062

STOW PVC Yellow6x16 AWG105° C13.2 mm ODCable #RF50565-*M†

flexlife ® Cable,PVC plug bodywith PVC contactcarriers

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WKM .."; "WK .." indicates nylon and "WKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

5 and 6-Wire minifast ® Cordsets, Heavy Duty

• Right Angle Female Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

WKM ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 31: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E31 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Housing Style Part Number Cable Features Pinout

RSM 26-*M

STOW PVC Yellow2x16 AWG105°C10.4 mm ODCable #RF50561-*M†

flexlife ® 1. WH2. BK

RSM 35-*M

STOW PVC Yellow3x16 AWG105°C10.4 mm ODCable #RF50537-*M†

flexlife

1. GN2. RD/BK3. RD/WH

RSM 35-*M/S600

SOOW CPE Yellow3x16 AWG105°C10.3 mm ODCable #RF50596-*M†

Weld FlashImmune, FlameImmune

RSM 36-*M

STOW PVC Yellow3x16 AWG105°C10.4 mm ODCable #RF50536-*M†

flexlife

1. GN2. BK3. WH

RSM 36D-*M/S1062

STOW PVC Yellow3x16 AWG105° C10.4 mm ODCable #RF50536-*M†

flexlife ® Cable,PVC plug bodywith PVC contactcarriers

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RSM .."; "RS .." indicates nylon and "RSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

2, 3 and 4-Wire minifast ® Cordsets, Heavy Duty

• Straight Male Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

RSM ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 32: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E32

IndustrialAutomation

Cor

dset

s

Housing Style Part Number Cable Features Pinout

RSM 46-*M

STOW PVC Yellow4x16 AWG105°C11 mm ODCable #RF50538-*M†

flexlife

1. BK2. WH3. RD4. GN

RSM 46-*M/S600

SOOW CPE Yellow4x16 AWG105°C11 mm ODCable #RF50595-*M†

Weld FlashImmune, FlameImmune

RSM 46-*M/S824

TC PVC Yellow4x16 AWG90°C9.6 mm ODCable #RF51220-*M†

Tray Rated

RSM 46D-*M/S1062

STOW PVC Yellow4x16 AWG105° C11 mm ODCable #RF50538-*M†

flexlife ® Cable,PVC plug bodywith PVC contactcarriers

RSM 47-*M

STOW PVC Yellow4x16 AWG105°C13.2 mm ODCable #RF50626-*M†

flexlife

1. BN2. WH3. BU4. BK

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RSM .."; "RS .." indicates nylon and "RSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

2, 3 and 4-Wire minifast ® Cordsets, Heavy Duty

• Straight Male Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

RSM ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 33: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E33 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Housing Style Part Number Cable Features Pinout

RSM 55-*M

STOW PVC Yellow5x16 AWG105°C13.2 mm ODCable #RF50540-*M†

flexlife ®

1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BK

RSM 55-*M/S600

SOOW CPE Yellow5x16 AWG105°C13 mm ODCable #RF50597-*M†

Weld FlashImmune, FlameImmune

1. RD2. RD3. GN4. RD5. RD

RSM 56-*M

STOW PVC Yellow5x16 AWG105°C13.2 mm ODCable #RF50539-*M†

flexlife

1. WH2. RD3. GN4. OG5. BK

RSM 56-*M/S1587

STOW TPE Yellow5x16 AWG105°C13.2 mm ODCable #RF51265-*M†

weldlife, WeldFlash Immune

RSM 56D-*M/S1062

STOW PVC Yellow5x16 AWG105° C13.2 mm ODCable #RF50539-*M†

flexlife ® Cable,PVC plug bodywith PVC contactcarriers

RSM 66-*M

STOW PVC Yellow6x16 AWG105°C13.2 mm ODCable #RF50565-*M†

flexlife 1. WH2. RD3. GN4. OG5. BK6. BURSM 66D-*M/S1062

STOW PVC Yellow6x16 AWG105° C13.2 mm ODCable #RF50565-*M†

flexlife ® Cable,PVC plug bodywith PVC contactcarriers

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RSM .."; "RS .." indicates nylon and "RSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

5 and 6-Wire minifast ® Cordsets, Heavy Duty

• Straight Male Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

RSM ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 34: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E34

IndustrialAutomation

Cor

dset

s

Housing Style Part Number Cable Features Pinout

WSM 26-*M

STOW PVC Yellow2x16 AWG105°C10.4 mm ODCable #RF50561-*M†

flexlife ® 1. WH2. BK

WSM 35-*M

STOW PVC Yellow3x16 AWG105°C10.4 mm ODCable #RF50537-*M†

flexlife

1. GN2. RD/BK3. RD/WH

WSM 35-*M/S600

SOOW CPE Yellow3x16 AWG105°C10.3 mm ODCable #RF50596-*M†

Weld FlashImmune, FlameImmune

WSM 36-*M

STOW PVC Yellow3x16 AWG105°C10.4 mm ODCable #RF50536-*M†

flexlife

1. GN2. BK3. WH

WSM 36D-*M/S1062

STOW PVC Yellow4x16 AWG105° C11 mm ODCable #RF50538-*M†

flexlife ® Cable,PVC plug bodywith PVC contactcarriers

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WSM .."; "WS .." indicates nylon and "WSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

2, 3 and 4-Wire minifast ® Cordsets, Heavy Duty

• Right Angle Male Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 VAC/DC, 9 A

WSM ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 35: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E35 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Housing Style Part Number Cable Features Pinout

WSM 46-*M

STOW PVC Yellow4x16 AWG105°C11 mm ODCable #RF50538-*M†

flexlife

1. BK2. WH3. RD4. GN

WSM 46-*M/S600

SOOW CPE Yellow4x16 AWG105°C11 mm ODCable #RF50595-*M†

Weld FlashImmune, FlameImmune

WSM 46-*M/S824

TC PVC Yellow4x16 AWG90°C9.6 mm ODCable #RF51220-*M†

Tray Rated

WSM 46D-*M/S1062

STOW PVC Yellow6x16 AWG105° C13.2 mm ODCable #RF50565-*M†

flexlife ® Cable,PVC plug bodywith PVC contactcarriers

WSM 47-*M

STOW PVC Yellow4x16 AWG105°C13.2 mm ODCable #RF50626-*M†

flexlife

1. BN2. WH3. BU4. BK

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WSM .."; "WS .." indicates nylon and "WSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

2, 3 and 4-Wire minifast ® Cordsets, Heavy Duty

• Right Angle Male Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 VAC/DC, 9 A

WSM ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 36: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E36

IndustrialAutomation

Cor

dset

s

Housing Style Part Number Cable Features Pinout

WSM 55-*M

STOW PVC Yellow5x16 AWG105°C13.2 mm ODCable #RF50540-*M†

flexlife ®

1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BK

WSM 55-*M/S600

SOOW CPE Yellow5x16 AWG105°C13 mm ODCable #RF50597-*M†

Weld FlashImmune, FlameImmune

1. RD2. RD3. GN4. RD5. RD

WSM 56-*M

STOW PVC Yellow5x16 AWG105°C13.2 mm ODCable #RF50539-*M†

flexlife

1. WH2. RD3. GN4. OG5. BK

WSM 56-*M/S1587

STOW TPE Yellow5x16 AWG105°C13.2 mm ODCable #RF51265-*M†

weldlife, WeldFlash Immune

WSM 56D-*M/S1062

STOW PVC Yellow5x16 AWG105° C13.2 mm ODCable #RF50539-*M†

flexlife ® Cable,PVC plug bodywith PVC contactcarriers

WSM 66-*M

STOW PVC Yellow6x16 AWG105°C13.2 mm ODCable #RF50565-*M†

flexlife 1. WH2. RD3. GN4. OG5. BK6. BUWSM 66D-*M/S1062

STOW PVC Yellow6x16 AWG105° C13.2 mm ODCable #RF50565-*M†

flexlife ® Cable,PVC plug bodywith PVC contactcarriers

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WSM .."; "WS .." indicates nylon and "WSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

5 and 6-Wire minifast ® Cordsets, Heavy Duty

• Right Angle Male Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 VAC/DC, 9 A

WSM ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 37: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E37 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Housing Style Part Number Cable Features Pinout

RKM 6B6-*M

ITC PLTC PVC Yellow6x16 AWG105°C9.6 mm ODCable #RF51030-*M†

flexlife ®

1. OG2. BU3. BK4. WH5. RD6. GN

RKM 6B6-*M/S90

AWM PUR Yellow6x16 AWG105°C9.6 mm ODCable #RF51137-*M†

Cut/abrasionImmune

RKM 6B6-*M/S101

AWM TPE Yellow6x16 AWG105°C8.5 mm ODCable #RF51044-*M†

flexlife-10, Highflex - over 10million cycles

RKM 6B6-*M/S600

SOOW CPE Yellow6x16 AWG105°C13.3 mm ODCable #RF51019-*M†

Weld FlashImmune, FlameImmune

RKM 6B6-*M/S1587

AWM PVC Yellow6x16 AWG105°C9.6 mm ODCable #RF51053-*M†

weldlife, Weldflash Immune

RKM 76-*M

ITC PLTC PVC Yellow7x16 AWG105°C9.6 mm ODCable #RF51031-*M†

flexlife

1. WH/BK2. BK3. WH4. RD5. OG6. BU7. GN

RKM 76-*M/S90

ITC PLTC PUR Yellow7x16 AWG105°C9.6 mm ODCable #RF51138-*M†

Cut/abrasionImmune

RKM 76-*M/S101

AWM TPE Yellow7x18 AWG105°C8.4 mm ODCable #RF51049*M†

flexlife-10, Highflex - over 10million cycles

RKM 76-*M/S600

SOOW CPE Yellow7x16 AWG105°C13.3 mm ODCable #RF51020-*M†

Weld FlashImmune, FlameImmune

RKM 76-*M/S1587

AWM PVC Yellow7x16 AWG105°C, 9.6 mm ODCable #RF51009-*M†

weldlife, Weldflash Immune

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RKM .."; "RKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

6 and 7-Wire minifast ® Cordsets, "B" Style Heavy Duty

RKM ..

• Straight Female Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 VAC/DC, 8 A

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 38: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E38

IndustrialAutomation

Cor

dset

s

Housing Style Part Number Cable Features Pinout

RKM 86-*M

ITC PLTC PVC Yellow8x16 AWG105°C11.2 mm ODCable #RF51032-*M†

flexlife ®

1. OG2. BU3. WH/BK4. BK5. WH6. RD7. GN8. RD/BK

RKM 86-*M/S90

ITC/PLTC PUR Yellow8x16 AWG105°C11.2 mm ODCable #RF51139-*M†

Cut/abrasionImmune

RKM 86-*M/S101

AWM TPE Yellow8x16105°C9.6 mm ODCable #RF51050-*M†

flexlife-10, Highflex - over 10million cycles

RKM 86-*M/S600

SOOW CPE Yellow8x16 AWG105°C14.4 mm ODCable #RF50976-*M†

Weld FlashImmune, FlameImmune

RKM 86-*M/S1587

AWM TPE Yellow8x16 AWG105°C10.5 mm ODCable #RF51011-*M†

weldlife, Weldflash Immune

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RKM .."; "RKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

8-Wire minifast ® Cordsets, "B" Style Heavy Duty

• Straight Female Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 VAC/DC, 8 A

RKM ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 39: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E39 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Housing Style Part Number Cable Features Pinout

WKM 6B6-*M

ITC PLTC PVC Yellow6x16 AWG105°C9.6 mm ODCable #RF51030-*M†

flexlife ®

1. OG2. BU3. BK4. WH5. RD6. GN

WKM 6B6-*M/S90

AWM PUR Yellow6x16 AWG105°C9.6 mm ODCable #RF51137-*M†

Cut/abrasionImmune

WKM 6B6-*M/S101

AWM TPE Yellow6x16 AWG105°C8.5 mm ODCable #RF51044-*M†

flexlife-10, Highflex - over 10million cycles

WKM 6B6-*M/S600

SOOW CPE Yellow6x16 AWG105°C13.3 mm ODCable #RF51019-*M†

Weld FlashImmune, FlameImmune

WKM 6B6-*M/S1587

AWM PVC Yellow6x16 AWG105°C9.6 mm ODCable #RF51053-*M†

weldlife, Weldflash Immune

WKM 76-*M

ITC PLTC PVC Yellow7x16 AWG105°C9.6 mm ODCable #RF51031-*M†

flexlife

1. WH/BK2. BK3. WH4. RD5. OG6. BU7. GN

WKM 76-*M/S90

ITC PLTC PUR Yellow7x16 AWG105°C9.6 mm ODCable #RF51138-*M†

Cut/abrasionImmune

WKM 76-*M/S101

AWM TPE Yellow7x18 AWG105°C8.4 mm ODCable #RF51049*M†

flexlife-10, Highflex - over 10million cycles

WKM 76-*M/S600

SOOW CPE Yellow7x16 AWG105°C13.3 mm ODCable #RF51020-*M†

Weld FlashImmune, FlameImmune

WKM 76-*M/S1587

AWM PVC Yellow7x16 AWG105°C, 9.6 mm ODCable #RF51009-*M†

weldlife, Weldflash Immune

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WKM .."; "WKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

6 and 7-Wire minifast ® Cordsets, "B" Style Heavy Duty Body

• Right Angle Female Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 VAC/DC, 8 A

WKM ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 40: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E40

IndustrialAutomation

Cor

dset

s

Housing Style Part Number Cable Features Pinout

WKM 86-*M

ITC PLTC PVC Yellow8x16 AWG105°C11.2 mm ODCable #RF51032-*M†

flexlife ®

1. OG2. BU3. WH/BK4. BK5. WH6. RD7. GN8. RD/BK

WKM 86-*M/S90

ITC/PLTC PUR Yellow8x16 AWG105°C11.2 mm ODCable #RF51139-*M†

Cut/abrasionImmune

WKM 86-*M/S101

AWM TPE Yellow8x16105°C9.6 mm ODCable #RF51050-*M†

flexlife-10, Highflex - over 10million cycles

WKM 86-*M/S600

SOOW CPE Yellow8x16 AWG105°C14.4 mm ODCable #RF50976-*M†

Weld FlashImmune, FlameImmune

WKM 86-*M/S1587

AWM TPE Yellow8x16 AWG105°C10.5 mm ODCable #RF51011-*M†

weldlife, Weldflash Immune

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WKM .."; "WKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

8-Wire minifast ® Cordsets, "B" Style Heavy Duty

• Right Angle Female Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 VAC/DC, 8 A

WKM ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 41: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E41 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Housing Style Part Number Cable Features Pinout

RSM 6B6-*M

ITC PLTC PVC Yellow6x16 AWG105°C9.6 mm ODCable #RF51030-*M†

flexlife ®

1. OG2. BU3. BK4. WH5. RD6. GN

RSM 6B6-*M/S90

AWM PUR Yellow6x16 AWG105°C9.6 mm ODCable #RF51137-*M†

Cut/abrasionImmune

RSM 6B6-*M/S101

AWM TPE Yellow6x16 AWG105°C8.5 mm ODCable #RF51044-*M†

flexlife-10, Highflex - over 10million cycles

RSM 6B6-*M/S600

SOOW CPE Yellow6x16 AWG105°C13.3 mm ODCable #RF51019-*M†

Weld FlashImmune, FlameImmune

RSM 6B6-*M/S1587

AWM PVC Yellow6x16 AWG105°C9.6 mm ODCable #RF51053-*M†

weldlife, Weldflash Immune

RSM 76-*M

ITC PLTC PVC Yellow7x16 AWG105°C9.6 mm ODCable #RF51031-*M†

flexlife

1. WH/BK2. BK3. WH4. RD5. OG6. BU7. GN

RSM 76-*M/S90

ITC PLTC PUR Yellow7x16 AWG105°C9.6 mm ODCable #RF51138-*M†

Cut/abrasionImmune

RSM 76-*M/S101

AWM TPE Yellow7x18 AWG105°C8.4 mm ODCable #RF51049*M†

flexlife-10, Highflex - over 10million cycles

RSM 76-*M/S600

SOOW CPE Yellow7x16 AWG105°C13.3 mm ODCable #RF51020-*M†

Weld FlashImmune, FlameImmune

RSM 76-*M/S1587

AWM PVC Yellow7x16 AWG105°C, 9.6 mm ODCable #RF51009-*M†

weldlife, Weldflash Immune

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RSM .."; "RSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

6 and 7-Wire minifast ® Cordsets, "B" Style Heavy Duty

• Straight Male Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 VAC/DC, 8 A

RSM ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 42: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E42

IndustrialAutomation

Cor

dset

s

Housing Style Part Number Cable Features Pinout

RSM 86-*M

ITC PLTC PVC Yellow8x16 AWG105°C11.2 mm ODCable #RF51032-*M†

flexlife ®

1. OG2. BU3. WH/BK4. BK5. WH6. RD7. GN8. RD/BK

RSM 86-*M/S90

ITC/PLTC PUR Yellow8x16 AWG105°C11.2 mm ODCable #RF51139-*M†

Cut/abrasionImmune

RSM 86-*M/S101

AWM TPE Yellow8x16105°C9.6 mm ODCable #RF51050-*M†

flexlife-10, Highflex - over 10million cycles

RSM 86-*M/S600

SOOW CPE Yellow8x16 AWG105°C14.4 mm ODCable #RF50976-*M†

Weld FlashImmune, FlameImmune

RSM 86-*M/S1587

AWM TPE Yellow8x16 AWG105°C10.5 mm ODCable #RF51011-*M†

weldlife, Weldflash Immune

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RSM .."; "RSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

8-Wire minifast ® Cordsets, "B" Style Heavy Duty

• Straight Male Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 VAC/DC, 8 A

RSM ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 43: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E43 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Housing Style Part Number Cable Features Pinout

WSM 6B6-*M

ITC PLTC PVC Yellow6x16 AWG105°C9.6 mm ODCable #RF51030-*M†

flexlife ®

1. OG2. BU3. BK4. WH5. RD6. GN

WSM 6B6-*M/S90

AWM PUR Yellow6x16 AWG105°C9.6 mm ODCable #RF51137-*M†

Cut/abrasionImmune

WSM 6B6-*M/S101

AWM TPE Yellow6x16 AWG105°C8.5 mm ODCable #RF51044-*M†

flexlife-10, Highflex - over 10million cycles

WSM 6B6-*M/S600

SOOW CPE Yellow6x16 AWG105°C13.3 mm ODCable #RF51019-*M†

Weld FlashImmune, FlameImmune

WSM 6B6-*M/S1587

AWM PVC Yellow6x16 AWG105°C9.6 mm ODCable #RF51053-*M†

weldlife, Weldflash Immune

WSM 76-*M

ITC PLTC PVC Yellow7x16 AWG105°C9.6 mm ODCable #RF51031-*M†

flexlife

1. WH/BK2. BK3. WH4. RD5. OG6. BU7. GN

WSM 76-*M/S90

ITC PLTC PUR Yellow7x16 AWG105°C9.6 mm ODCable #RF51138-*M†

Cut/abrasionImmune

WSM 76-*M/S101

AWM TPE Yellow7x18 AWG105°C8.4 mm ODCable #RF51049*M†

flexlife-10, Highflex - over 10million cycles

WSM 76-*M/S600

SOOW CPE Yellow7x16 AWG105°C13.3 mm ODCable #RF51020-*M†

Weld FlashImmune, FlameImmune

WSM 76-*M/S1587

AWM PVC Yellow7x16 AWG105°C, 9.6 mm ODCable #RF51009-*M†

weldlife, Weldflash Immune

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WSM .."; "WSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

6 and 7-Wire minifast ® Cordsets, "B" Style Heavy Duty

• Right Angle Male Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 VAC/DC, 8 A

WSM ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 44: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E44

IndustrialAutomation

Cor

dset

s

Housing Style Part Number Cable Features Pinout

WSM 86-*M

ITC PLTC PVC Yellow8x16 AWG105°C11.2 mm ODCable #RF51032-*M†

flexlife ®

1. OG2. BU3. WH/BK4. BK5. WH6. RD7. GN8. RD/BK

WSM 86-*M/S90

ITC/PLTC PUR Yellow8x16 AWG105°C11.2 mm ODCable #RF51139-*M†

Cut/abrasionImmune

WSM 86-*M/S101

AWM TPE Yellow8x16105°C9.6 mm ODCable #RF51050-*M†

flexlife-10, Highflex - over 10million cycles

WSM 86-*M/S600

SOOW CPE Yellow8x16 AWG105°C14.4 mm ODCable #RF50976-*M†

Weld FlashImmune, FlameImmune

WSM 86-*M/S1587

AWM TPE Yellow8x16 AWG105°C10.5 mm ODCable #RF51011-*M†

weldlife, Weldflash Immune

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WSM .."; "WSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

8-Wire minifast ® Cordsets, "B" Style Heavy Duty

• Right Angle Male Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 VAC/DC, 8 A

WSM ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 45: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E45 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Housing Style Part Number Cable Features Pinout

RKM 96-*M

ITC PLTC PVC Yellow9x16 AWG105°C12.5 mm ODCable #RF51033-*M†

flexlife ®

1. OG2. BU3. RD/BK4. GN/BK5. WH6. RD7. GN8. WH/BK9. BK

RKM 96-*M/S90

ITC PLTC PUR Yellow9x16 AWG105°C12.5 mm ODCable #RF51140-*M†

Cut/abrasionImmune

RKM 96-*M/S101

AWM TPE Yellow9x16 AWG105°C10.5 mm ODCable #RF51051-*M†

flexlife-10, Highflex - over 10million cycles

RKM 96-*M/S600

SOOW CPE Yellow9x16 AWG105°C15.2 mm ODCable #RF51021-*M†

Weld FlashImmune, FlameImmune

RKM 96-*M/S1587

AWM TPE Yellow9x16 AWG105°C11.2 mm ODCable #RF51013-*M†

weldlife, Weldflash Immune

RKM 106-*M

ITC PLTC PVC Yellow10x16 AWG105°C12.5 mm ODCable #RF51034-*M†

flexlife

1. OG2. BU3. WH/BK4. RD/BK5. GN/BK6. OG/BK7. RD8. GN9. BK10. WH

RKM 106-*M/S90

ITC/PLTC Yellow10x16 AWG105°C12.5 mm ODCable #RF51141-*M†

Cut/abrasionImmune

RKM 106-*M/S101

AWM TPE Yellow10x16 AWG105°C10.5 mm ODCable #RF51052-*M†

flexlife-10, Highflex - over 10million cycles

RKM 106-*M/S600

SOOW CPE Yellow10x16 AWG105°C15.7 mm ODCable #RF51022-*M†

Weld FlashImmune, FlameImmune

RKM 106-*M/S1587

AWM TPE Yellow10x16 AWG105°C12.5 mm ODCable #RF51015-*M†

weldlife, Weldflash Immune

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RKM .."; "RKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

9 and 10-Wire minifast ® Cordsets, "C" Style Heavy Duty

RKM ..

• Straight Female Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 VAC/DC, 7 A

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 46: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E46

IndustrialAutomation

Cor

dset

s

Housing Style Part Number Cable Features Pinout

RKM 126-*M

ITC PLTC PVC Yellow12x16 AWG105°C13.2 mm ODCable #RF51035-*M†

flexlife ®

1. OG2. BU3. WH/BK4. RD/BK5. GN/BK6. OG/BK7. BU/BK8. BK/WH9. GN10. RD11. WH12. BK

RKM 126-*M/S90

ITC/PLTC PUR Yellow12x16 AWG105°C13.2 mm ODCable #RF51142-*M†

Cut/abrasionImmune

RKM 126-*M/S101

AWM TPE Yellow12x16 AWG105°C11.2 mm ODCable #RF51148-*M†

flexlife-10, Highflex - over 10million cycles

RKM 126-*M/S600

SOOW CPE Yellow12x16 AWG105°C16.5 mm ODCable #RF51023-*M†

Weld FlashImmune, FlameImmune

RKM 126-*M/S1587

AWM TPE Yellow12x16 AWG105°C12.5 mm ODCable #RF51017-*M†

weldlife, Weldflash Immune

RKM 126-*M/S1052/S1587

AWM TPE Grey12x16 AWG105°C12.5 mm ODCable #RF51275-*M†

weldlife, Weldflash Immune

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RKM .."; "RKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

12-Wire minifast ® Cordsets, "C" Style Heavy Duty

• Straight Female Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 VAC/DC, 7 A

RKM ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 47: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E47 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Housing Style Part Number Cable Features Pinout

WKM 96-*M

ITC PLTC PVC Yellow9x16 AWG105°C12.5 mm ODCable #RF51033-*M†

flexlife ®

1. OG2. BU3. RD/BK4. GN/BK5. WH6. RD7. GN8. WH/BK9. BK

WKM 96-*M/S90

ITC PLTC PUR Yellow9x16 AWG105°C12.5 mm ODCable #RF51140-*M†

Cut/abrasionImmune

WKM 96-*M/S101

AWM TPE Yellow9x16 AWG105°C10.5 mm ODCable #RF51051-*M†

flexlife-10, Highflex - over 10million cycles

WKM 96-*M/S600

SOOW CPE Yellow9x16 AWG105°C15.2 mm ODCable #RF51021-*M†

Weld FlashImmune, FlameImmune

WKM 96-*M/S1587

AWM TPE Yellow9x16 AWG105°C11.2 mm ODCable #RF51013-*M†

weldlife, Weldflash Immune

WKM 106-*M

ITC PLTC PVC Yellow10x16 AWG105°C12.5 mm ODCable #RF51034-*M†

flexlife

1. OG2. BU3. WH/BK4. RD/BK5. GN/BK6. OG/BK7. RD8. GN9. BK10. WH

WKM 106-*M/S90

ITC/PLTC Yellow10x16 AWG105°C12.5 mm ODCable #RF51141-*M†

Cut/abrasionImmune

WKM 106-*M/S101

AWM TPE Yellow10x16 AWG105°C10.5 mm ODCable #RF51052-*M†

flexlife-10, Highflex - over 10million cycles

WKM 106-*M/S600

SOOW CPE Yellow10x16 AWG105°C15.7 mm ODCable #RF51022-*M†

Weld FlashImmune, FlameImmune

WKM 106-*M/S1587

AWM TPE Yellow10x16 AWG105°C12.5 mm ODCable #RF51015-*M†

weldlife, Weldflash Immune

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WKM .."; "WKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

9 and 10-Wire minifast ® Cordsets, "C" Style Heavy Duty

WKM ..

• Right Angle Female Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 VAC/DC, 7 A

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 48: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E48

IndustrialAutomation

Cor

dset

s

Housing Style Part Number Cable Features Pinout

WKM 126-*M

ITC PLTC PVC Yellow12x16 AWG105°C13.2 mm ODCable #RF51035-*M†

flexlife ®

1. OG2. BU3. WH/BK4. RD/BK5. GN/BK6. OG/BK7. BU/BK8. BK/WH9. GN10. RD11. WH12. BK

WKM 126-*M/S90

ITC/PLTC PUR Yellow12x16 AWG105°C13.2 mm ODCable #RF51142-*M†

Cut/abrasionImmune

WKM 126-*M/S101

AWM TPE Yellow12x16 AWG105°C11.2 mm ODCable #RF51148-*M†

flexlife-10, Highflex - over 10million cycles

WKM 126-*M/S600

SOOW CPE Yellow12x16 AWG105°C16.5 mm ODCable #RF51023-*M†

Weld FlashImmune, FlameImmune

WKM 126-*M/S1587

AWM TPE Yellow12x16 AWG105°C12.5 mm ODCable #RF51017-*M†

weldlife, WeldFlash Immune

WKM 126-*M/S1052/S1587

AWM TPE Grey12x16 AWG105°C12.5 mm ODCable #RF51275-*M†

weldlife, WeldFlash Immune

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WKM .."; "WKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

12-Wire minifast ® Cordsets, "C" Style Heavy Duty

WKM ..

• Right Angle Female Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 VAC/DC, 7 A

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 49: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E49 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Housing Style Part Number Cable Features Pinout

RSM 96-*M

ITC PLTC PVC Yellow9x16 AWG105°C12.5 mm ODCable #RF51033-*M†

flexlife ®

1. OG2. BU3. RD/BK4. GN/BK5. WH6. RD7. GN8. WH/BK9. BK

RSM 96-*M/S90

ITC PLTC PURYellow9x16 AWG105°C12.5 mm ODCable #RF51140-*M†

Cut/abrasionImmune

RSM 96-*M/S101

AWM TPE Yellow9x16 AWG105°C10.5 mm ODCable #RF51051-*M†

flexlife-10, Highflex - over 10million cycles

RSM 96-*M/S600

SOOW CPE Yellow9x16 AWG105°C15.2 mm ODCable #RF51021-*M†

Weld FlashImmune, FlameImmune

RSM 96-*M/S1587

AWM TPE Yellow9x16 AWG105°C11.2 mm ODCable #RF51013-*M†

weldlife, Weldflash Immune

RSM 106-*M

ITC PLTC PVC Yellow10x16 AWG105°C12.5 mm ODCable #RF51034-*M†

flexlife

1. OG2. BU3. WH/BK4. RD/BK5. GN/BK6. OG/BK7. RD8. GN9. BK10. WH

RSM 106-*M/S90

ITC/PLTC Yellow10x16 AWG105°C12.5 mm ODCable #RF51141-*M†

Cut/abrasionImmune

RSM 106-*M/S101

AWM TPE Yellow10x16 AWG105°C10.5 mm ODCable #RF51052-*M†

flexlife-10, Highflex - over 10million cycles

RSM 106-*M/S600

SOOW CPE Yellow10x16 AWG105°C15.7 mm ODCable #RF51022-*M†

Weld FlashImmune, FlameImmune

RSM 106-*M/S1587

AWM TPE Yellow10x16 AWG105°C12.5 mm ODCable #RF51015-*M†

weldlife, Weldflash Immune

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RSM .."; "RSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

9 and 10-Wire minifast ® Cordsets, "C" Style Heavy Duty

RSM ..

• Straight Male Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 VAC/DC, 7 A

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 50: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E50

IndustrialAutomation

Cor

dset

s

Housing Style Part Number Cable Features Pinout

RSM 126-*M

ITC PLTC PVC Yellow12x16 AWG105°C13.2 mm ODCable #RF51035-*M†

flexlife ®

1. OG2. BU3. WH/BK4. RD/BK5. GN/BK6. OG/BK7. BU/BK8. BK/WH9. GN10. RD11. WH12. BK

RSM 126-*M/S90

ITC/PLTC PUR Yellow12x16 AWG105°C13.2 mm ODCable #RF51142-*M†

Cut/abrasionImmune

RSM 126-*M/S101

AWM TPE Yellow12x16 AWG105°C11.2 mm ODCable #RF51148-*M†

flexlife-10, Highflex - over 10million cycles

RSM 126-*M/S600

SOOW CPE Yellow12x16 AWG105°C16.5 mm ODCable #RF51023-*M†

Weld FlashImmune, FlameImmune

RSM 126-*M/S1587

AWM TPE Yellow12x16 AWG105°C12.5 mm ODCable #RF51017-*M†

weldlife, WeldFlash Immune

RSM 126-*M/S1052/S1587

AWM TPE Grey12x16 AWG105°C12.5 mm ODCable #RF51275-*M†

weldlife, WeldFlash Immune

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RSM .."; "RSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

12-Wire minifast ® Cordsets, "C" Style Heavy Duty

RSM ..

• Straight Male Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 VAC/DC, 7 A

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 51: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E51 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Housing Style Part Number Cable Features Pinout

WSM 96-*M

ITC PLTC PVC Yellow9x16 AWG105°C12.5 mm ODCable #RF51033-*M†

flexlife ®

1. OG2. BU3. RD/BK4. GN/BK5. WH6. RD7. GN8. WH/BK9. BK

WSM 96-*M/S90

ITC PLTC PUR Yellow9x16 AWG105°C12.5 mm ODCable #RF51140-*M†

Cut/abrasionImmune

WSM 96-*M/S101

AWM TPE Yellow9x16 AWG105°C10.5 mm ODCable #RF51051-*M†

flexlife-10, Highflex - over 10million cycles

WSM 96-*M/S600

SOOW CPE Yellow9x16 AWG105°C15.2 mm ODCable #RF51021-*M†

Weld FlashImmune, FlameImmune

WSM 96-*M/S1587

AWM TPE Yellow9x16 AWG105°C11.2 mm ODCable #RF51013-*M†

weldlife, Weldflash Immune

WSM 106-*M

ITC PLTC PVC Yellow10x16 AWG105°C12.5 mm ODCable #RF51034-*M†

flexlife

1. OG2. BU3. WH/BK4. RD/BK5. GN/BK6. OG/BK7. RD8. GN9. BK10. WH

WSM 106-*M/S90

ITC/PLTC Yellow10x16 AWG105°C12.5 mm ODCable #RF51141-*M†

Cut/abrasionImmune

WSM 106-*M/S101

AWM TPE Yellow10x16 AWG105°C10.5 mm ODCable #RF51052-*M†

flexlife-10, Highflex - over 10million cycles

WSM 106-*M/S600

SOOW CPE Yellow10x16 AWG105°C15.7 mm ODCable #RF51022-*M†

Weld FlashImmune, FlameImmune

WSM 106-*M/S1587

AWM TPE Yellow10x16 AWG105°C12.5 mm ODCable #RF51015-*M†

weldlife, Weldflash Immune

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WSM .."; "WSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

WSM ..

9 and 10-Wire minifast ® Cordsets, "C" Style Heavy Duty

• Right Angle Male Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 VAC/DC, 7 A

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 52: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E52

IndustrialAutomation

Cor

dset

s

Housing Style Part Number Cable Features Pinout

WSM 126-*M

ITC PLTC PVC Yellow12x16 AWG105°C13.2 mm ODCable #RF51035-*M†

flexlife ®

1. OG2. BU3. WH/BK4. RD/BK5. GN/BK6. OG/BK7. BU/BK8. BK/WH9. GN10. RD11. WH12. BK

WSM 126-*M/S90

ITC/PLTC PUR Yellow12x16 AWG105°C13.2 mm ODCable #RF51142-*M†

Cut/abrasionImmune

WSM 126-*M/S101

AWM TPE Yellow12x16 AWG105°C11.2 mm ODCable #RF51148-*M†

flexlife-10, Highflex - over 10million cycles

WSM 126-*M/S600

SOOW CPE Yellow12x16 AWG105°C16.5 mm ODCable #RF51023-*M†

Weld FlashImmune, FlameImmune

WSM 126-*M/S1587

AWM TPE Yellow12x16 AWG105°C12.5 mm ODCable #RF51017-*M†

weldlife, Weldflash Immune

WSM 126-*M/S1052/S1587

AWM TPE Grey12x16 AWG105°C12.5 mm ODCable #RF51275-*M†

weldlife, WeldFlash Immune

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "WSM .."; "WSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

WSM ..

12-Wire minifast ® Cordsets, "C" Style Heavy Duty

• Right Angle Male Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 VAC/DC, 7 A

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 53: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E53 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

2-6 Wire minifast ® Extreme Duty, Armored Cordsets

• Straight Female Connectors

• Shield to Coupling Nut

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

Housing Style Part Number Cable Features Pinout

RKM 28A-*M

MC ITC PLTC PVCArmor Yellow2x18 AWG90°C13.5 mm ODCable #RF51039-*M†

Armor Cable forExtremeConditions

1. WH2. BK

RKM 38A-*M

MC ITC PLTC PVCArmor Yellow3x18 AWG90°C13.5 mm ODCable #RF51040-*M†

Armor Cable forExtremeConditions

1. GN2. BK3. WH

RKM 48A-*M

MC ITC PLTC PVCArmor Yellow4x18 AWG90°C13.5 mm ODCable #RF51041-*M†

Armor Cable forExtremeConditions

1. BK2. WH3. RD4. GN

RKM 58A-*M

MC PVC ArmorYellow5x18 AWG90°C12.2 mm ODCable #RF51042-*M†

Armor Cable forExtremeConditions

1. WH2. RD3. GN4. OG5. BK

RKM 68A-*M

MC PVC ArmorYellow6x18 AWG90°C13 mm ODCable #RF51043-*M†

Armor Cable forExtremeConditions

1. WH2. RD3. GN4. OG5. BK6. BU

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RKM .."; "RKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

RKM ..A

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 54: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E54

IndustrialAutomation

Cor

dset

s

Housing Style Part Number Cable Features Pinout

RSM 28A-*M

ITC PLTC PVC ArmorYellow2x18 AWG90°C13.5 mm ODCable #RF51039-*M†

Armor Cablefor ExtremeConditions

1. WH2. BK

RSM 38A-*M

ITC PLTC PVC ArmorYellow3x18 AWG90°C13.5 mm ODCable #RF51040-*M†

1. GN2. BK3. WH

RSM 48A-*M

ITC PLTC PVC ArmorYellow4x18 AWG90°C13.5 mm ODCable #RF51041-*M†

1. BK2. WH3. RD4. GN

RSM 58A-*M

AWM PVC ArmorYellow5x18 AWG90°C12.2 mm ODCable #RF51042-*M†

1. WH2. RD3. GN4. OG5. BK

RSM 68A-*M

AWM PVC ArmorYellow6x18 AWG90°C13.0 mm ODCable #RF51043-*M†

1. WH2. RD3. GN4. OG5. BK6. BU

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RSM .."; "RSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

RSM ..A

2-6 Wire minifast ® Extreme Duty, Armored Cordsets

• Straight Male Connectors

• Shield to Coupling Nut

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 55: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E55 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

2-5 Wire minifast ® Cordsets, Smooth Body

Housing Style Part Number Cable Features Pinout

RKM 26D-*M

STOW PVC Yellow2x16 AWG105°C10.4 mm ODCable #RF50561-*M†

flexlife ® 1. WH2. BK

RKM 35D-*M

STOW PVC Yellow3x16 AWG105°C10.4 mm ODCable #RF50537-*M†

flexlife1. GN2. RD/BK3. RD/WH

RKM 36D-*M

STOW PVC Yellow3x16 AWG105°C10.4 mm ODCable #RF50536-*M†

flexlife1. GN2. BK3. WH

RKM 46D-*M

STOW PVC Yellow4x16 AWG105°C11 mm ODCable #RF50538-*M†

flexlife

1. BK2. WH3. RD4. GN

RKM 56D-*M

STOW PVC Yellow5x16 AWG105°C13.2 mm ODCable #RF50539-*M†

flexlife

1. WH2. RD3. GN4. OG5. BK

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RKM .."; "RKV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

• Straight Female Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

RKM ..D

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 56: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E56

IndustrialAutomation

Cor

dset

s

Housing Style Part Number Cable Features Pinout

RSM 26D-*M

STOW PVC Yellow2x16 AWG105°C10.4 mm ODCable #RF50561-*M†

flexlife ® 1. WH2. BK

RSM 35D-*M

STOW PVC Yellow3x16 AWG105°C10.4 mm ODCable #RF50537-*M†

flexlife1. GN2. RD/BK3. RD/WH

RSM 36D-*M

STOW PVC Yellow3x16 AWG105°C10.4 mm ODCable #RF50536-*M†

flexlife1. GN2. BK3. WH

RSM 46D-*M

STOW PVC Yellow4x16 AWG105°C11 mm ODCable #RF50538-*M†

flexlife

1. BK2. WH3. RD4. GN

RSM 56D-*M

STOW PVC Yellow5x16 AWG105°C13.2 mm ODCable #RF50539-*M†

flexlife

1. WH2. RD3. GN4. OG5. BK

* Length in Meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.Standard coupling nut material is nickel plated brass "RSM .."; "RS .." indicates nylon and "RSV .." indicates 316 stainless steel.† See Section N for reelfast ® cable information.

RSM ..D

2-5 Wire minifast ® Cordsets, Smooth Body

• Straight Male Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 57: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E57 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Housing Style Part Number Cable Application Pinout

RKM 30-2M/S90-SP

AWM PUR Yellow3X18 AWG105° C300 V9 A7.3 mm OD

For repetitive 2-wireAC with ground or3-wire applications

1. GN/YE2. BN3. BU

RKM 50-1M/S90-SP

AWM PUR Yellow5X18 AWG105° C300 V, 9 A7.3 mm OD

For repetitive 5-wireAC applications

1. BK2. BU3. GN/YE4. BN5. WH

WKM 30-2M/S90-SP

AWM PUR Yellow3X18 AWG105° C300 V9 A7.3 mm OD

For repetitive 2-wireAC with ground or3-wire applications

1. GN/YE2. BN3. BU

WKM 50-1M/S90-SP

AWM PUR Yellow5X18 AWG105° C300 V, 9 A7.3 mm OD

For repetitive 5-wireAC applications

1. BK2. BU3. GN/YE4. BN5. WH

* Length in meters. Standard cable lengths are 2, 4, 6, 8 and 10 meters. Consult factory for other lengths.Standard coulpling nut material is nickel plated brass .. "RKM (WKM) .."; "RKV (WKV) .." indicates 316 stainless steel.

• Straight and Right Angle FemaleConnectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 300 V, 9 A

3 and 5-Wire minifast ® Spiral Cordsets, Standard

WKM ..

RKM ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 58: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E58

IndustrialAutomation

Cor

dset

s

Housing Style Part Number Cable Application Pinout

RSM 30-2M/S90-SP

AWM PUR Yellow3X18 AWG105° C300 V,9 A7.3 mm OD

For repetitive2-wire AC withground or 3-wireapplications

1. GN/YE2. BN3. BU

RSM 50-1M/S90-SP

AWM PUR Yellow5X18 AWG105° C300 V, 9 A7.3 mm OD

For repetitive5-wire ACapplications

1. BK2. BU3. GN/YE4. BN5. WH

WSM 30-2M/S90-SP

AWM PUR Yellow3X18 AWG105° C300 V9 A7.3 mm OD

For repetitive2-wire AC withground or 3-wireapplications

1. GN/YE2. BN3. BU

WSM 50-1M/S90-SP

AWM PUR Yellow5X18 AWG105° C300 V, 9 A7.3 mm OD

For repetitive5-wire ACapplications

1. BK2. BU3. GN/YE4. BN5. WH

* Length in meters. Standard cable lengths are 2, 4, 6, 8 and 10 meters. Consult factory for other lengths.Standard coulpling nut material is nickel plated brass .. "RSM (WSM) .."; "RSV (WSV) .." indicates 316 stainless steel.

• Straight and Right Angle MaleConnectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 300 V, 9 A

3 and 5-Wire minifast ® Spiral Cordsets, Standard

WSM ..

RSM ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 59: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E59 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

minifast ® Standard Male Receptacles NPSM and NPT

minifast ® "B" Style Male Receptacles 1/2-14NPT and 3/4-14NPT

minifast ® "C" Style Female Receptacles 1/2-14NPT and 3/4-14NPT

1

RSF .. Page E63 - E66

5

"C" Style RSF ..1/2-14NPT Page E77

3

"B" Style RSF ..1/2-14NPT Page E76

2

RSF ..NPT Page E71 - E73

6

"C" Style RSF ..3/4-14NPT Page E77

4

"B" Style RSF ..3/4-14NPT Page E76

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 60: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E60

IndustrialAutomation

Rece

ptac

les

9

RSF ..M20 Page E74 - E75

11

"B" Style RKF ..1/2-14NPT Page E83

minifast ® Standard Female Receptacles NPSM and NPT

minifast ® "B" Style Female Receptacles 1/2-14NPT and 3/4-14NPT

12

"B" Style RKF ..3/4-14NPT Page E83

10

RKF ..M20 Page E81 - E82

minifast ® Standard Female Receptacles M20

7

RKF .. Page E67 - E70

8

RKF ..NPT Page E78 - E80

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 61: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E61 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

RKFP CutoutRSFP Cutout

minifast ® 16 AWG Back Panel Mount Male and Female Receptacles

16

RKFP .. Page E88 - E90

15

RSFP .. Page E85 - E87

13

"C" Style RKF ...1/2-14NPT Page E84

14

"C" Style RKF ..3/4-14NPT Page E84

minifast ® "C" Style Female Receptacles 1/2-14NPT and 3/4-14NPT

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 62: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E62

IndustrialAutomation

Rece

ptac

les

RSF RKF .. Page E93

21

minifast ® Bulkhead Feed-thru Receptacles

17

RSF ..PCB Page E91

18

RSFL .. Page E91

19

RKF ..PCB Page E92

minifast ® Front PCB Mount Male and Female Receptacles

20

RKFL .. Page E92

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 63: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E63 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

• Male Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

2 and 3-Wire minifast ® Receptacles, Front Mount, 1/2-14 NPSM Threads

Drawing Number Part Number Lead Specs. Features Pinout

RSF 20-*M

UL, CSA2x18 AWG105°C600 V, 9 A

1/2-14NPSMThreads,Standard Duty

1. BN2. BU

RSF 26-*M

UL, CSA2x16 AWG Leads105°C600 V, 9 A

1/2-14NPSMThreads,Heavy Duty

1. WH2. BK

RSF 28-*M

UL, CSA2x18 AWG105°C600 V, 9 A

1/2-14 NPSMThreads, HeavyDuty

1. WH2. BK

RSF 30-*M

UL, CSA3x18 AWG105°C600 V, 9 A

1/2-14NPSMThreads,Standard Duty

1. GY/YE2. BN3. BU

RSF 31-*M

UL, CSA3x18 AWG105°C600 V, 9 A

1/2-14NPSMThreads,Standard Duty 1. BK

2. BN3. BU

RSF 31-*M/S849

UL, CSA3x22 AWG105°C300 V, 9 A

1/2-14NPSMThreads,Standard Duty

RSF 311-*M

UL, CSA3x18 AWG105°C600 V, 9 A

Automotive ColorCode1/2-14NPSMThreads

1. GN2. RD/BK3. RD/WH

RSF 311-*M/S849

UL, CSA3x22 AWG105°C300 V, 9 A

Automotive ColorCode1/2-14NPSMThreads

RSF 35-*M

UL, CSA3x16 AWG105°C600 V, 9 A

Automotive ColorCode1/2-14NPSMThreads

RSF 36-*M

UL, CSA3x16 AWG105°C600 V, 9 A

1/2-14 NPSMThreads, HeavyDuty

1. GN2. BK3. WH

RSF 38-*M

UL, CSA3x18 AWG105°C600 V, 9 A

1/2-14 NPSMThreads, HeavyDuty

1. GN2. BK3. WH

See page E59 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RSF .."; "RSFV .." indicates 316 stainless steel housing (leads only)and "RSFK .." indicates nylon housing.For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.

1

RSF ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 64: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E64

IndustrialAutomation

Rece

ptac

les

• Male Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

4-Wire minifast ® Receptacles, Front Mount, 1/2-14 NPSM Threads

Drawing Number Part Number Lead Specs. Features Pinout

RSF 40-*M

UL, CSA4x18 AWG105°C600 V, 9 A

1/2-14 NPSMThreads, StandardDuty

1. BN2. WH3. BU4. BK

RSF 40-*M/S658

UL, CSA4x18 AWG105°C300 V, 9 A

RSF 40-*M/S849

UL, CSA4x22 AWG105°C300 V, 9 A

RSF 46-*M

UL, CSA4x16 AWG105°C600 V, 9 A

1/2-14 NPSMThreads, HeavyDuty

1. BK2. WH3. RD4. GN

RSF 48-*M

UL, CSA4x18 AWG105°C600 V, 9 A

1/2-14 NPSMThreads, StandardDuty

See page E59 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RSF .."; "RSFV .." indicates 316 stainless steel housing (leads only)and "RSFK .." indicates nylon housing.For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.

1

RSF ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 65: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E65 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Drawing Number Part Number Lead Specs. Features Pinout

RSF 50-*M

UL, CSA5x18 AWG105°C600 V, 9 A 1/2-14NPSM

Threads,Standard Duty

1. BK2. BU3. GN/YE4. BN5. WHRSF 50-*M/S849

UL, CSA5x22 AWG105°C300 V, 9 A

RSF 511-*M

UL, CSA5x18 AWG105°C600 V, 9 A

Automotive ColorCode1/2-14NPSMThreads

1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BKRSF 511-*M/S849

UL, CSA5x22 AWG105°C300 V, 9 A

RSF 55-*M

UL, CSA5x16 AWG105°C600 V, 9 A

Automotive ColorCode1/2-14NPSMThreads

1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BK

RSF 56-*M

UL, CSA5x16 AWG105°C600 V, 9 A

1/2-14NPSMThreads,Heavy Duty

1. WH2. RD3. GN4. OG5. BK

RSF 56-*M/S849

UL, CSA5x22 AWG105°C300 V, 9 A

RSF 58-*M

UL, CSA5x18 AWG105°C300 V, 9 A

See page E59 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RSF .."; "RSFV .." indicates 316 stainless steel housing (leads only)and "RSFK .." indicates nylon housing.For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.

• Male Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

5-Wire minifast ® Receptacles, Front Mount, 1/2-14 NPSM Threads

1

RSF ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 66: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E66

IndustrialAutomation

Rece

ptac

les

• Male Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

6-Wire minifast ® Receptacles, Front Mount, 1/2-14 NPSM Threads

1

RSF ..

Drawing Number Part Number Lead Specs. Features Pinout

RSF 61-*M

UL, CSA6x18 AWG105°C600 V, 9 A 1/2-14NPSM

Threads,Standard Threads

1. GN2. WH3. BU4. Gy5. YE6. BNRSF 61-*M/S849

UL, CSA6x22 AWG105°C300 V, 9 A

RSF 66-*M

UL, CSA6x16 AWG105°C600 V, 9 A 1/2-14NPSM

Threads,Heavy Duty

1. WH2. RD3. GN4. OG5. BK6. BURSF 68-*M

UL, CSA6x18 AWG105°C600 V, 9 A

See page E59 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RSF .."; "RSFV .." indicates 316 stainless steel housing (leads only)and "RSFK .." indicates nylon housing.For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 67: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E67 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

• Female Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

2 and 3-Wire minifast ® Receptacles, Front Mount, 1/2-14 NPSM Threads

Drawing Number Part Number Lead Specs. Features Pinout

RKF 20-*MUL, CSA2x18 AWG105°C

1/2-14NPSMThreads,Standard Duty

1. BN2. BU

RKF 26-*MUL, CSA2x16 AWG Leads105°C

1/2-14NPSMThreads,Heavy Duty

1. WH2. BK

RKF 28-*M

UL, CSA2x18 AWG105°C600 V, 9 A

1/2-14NPSMThreads,Heavy Duty

1. WH2. BK

RKF 30-*MUL, CSA3x18 AWG105°C

1/2-14NPSMThreads,Standard Duty

1. GY/YE2. BN3. BU

RKF 31-*MUL, CSA3x18 AWG105°C

1/2-14NPSMThreads,Standard Duty

1. BK2. BN3. BU

RKF 311-*MUL, CSA3x18 AWG105°C

Automotive ColorCode1/2-14NPSMThreads 1. GN

2. RD/BK3. RD/WH

RKF 35-*MUL, CSA3x16 AWG105°C

Automotive ColorCode1/2-14NPSMThreads

RKF 36-*MUL, CSA3x16 AWG105°C

1/2-14NPSMThreads,Heavy Duty

1. GN2. BK3. WH

RKF 38-*M

UL, CSA3x18 AWG105°C600 V, 9 A

1/2-14NPSMThreads,Heavy Duty

1. GN2. BK3. WH

See page E60 for dimensional drawings.Standard lead length is 0.5 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RKF .."; "RKFV .." indicates 316 stainless steel housing (leads only) and"RKFK .." indicates nylon housing.For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.

7

RKF ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 68: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E68

IndustrialAutomation

Rece

ptac

les

Drawing Number Part Number Lead Specs. Features Pinout

RKF 40-*M

UL, CSA4x18 AWG105°C600 V, 9 A

1/2-14NPSMThreads,Standard Duty 1. BN

2. WH3. BU4. BK

RKF 40-*M/S849

UL, CSA4x22 AWG105°C300 V, 9 A

1/2-14NPSMThreads,Standard Duty

RKF 46-*M

UL, CSA4x16 AWG105°C600 V, 9 A

1/2-14NPSMThreads,Heavy Duty

1. BK2. WH3. RD4. GN

RKF 46-*M/S849

UL, CSA4x22 AWG105°C300 V, 9 A

RKF 48-*M

UL, CSA4x18 AWG105°C600 V, 9 A

See page E60 for dimensional drawings.Standard lead length is 0.5 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RKF .."; "RKFV .." indicates 316 stainless steel housing (leads only) and"RKFK .." indicates nylon housing.For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.

• Female Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

4-Wire minifast ® Receptacles, Front Mount, 1/2-14 NPSM Threads

7

RKF ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 69: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E69 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Drawing Number Part Number Lead Specs. Features Pinout

RKF 50-*MUL, CSA5x18 AWG105°C 1/2-14NPSM

Threads,Standard Duty

1. BK2. BU3. GN/YE4. BN5. WHRKF 50-*M/S849

UL, CSA5x22 AWG105°C300 V

RKF 511-*MUL, CSA5x18 AWG105°C Automotive Color

Code1/2-14NPSMThreads

1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BKRKF 511-*M/S849

UL, CSA5x22 AWG105°C300 V

RKF 55-*MUL, CSA5x16 AWG105°C

Automotive ColorCode1/2-14NPSMThreads

1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BK

RKF 56-*MUL, CSA5x16 AWG105°C 1/2-14NPSM

Threads,Heavy Duty

1. WH2. RD3. GN4. OG5. BKRKF 58-*M

UL, CSA5x18 AWG105°C300 V, 9 A

See page E60 for dimensional drawings.Standard lead length is 0.5 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RKF .."; "RKFV .." indicates 316 stainless steel housing (leads only) and"RKFK .." indicates nylon housing.For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.

• Female Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

5-Wire minifast ® Receptacles, Front Mount, 1/2-14 NPSM Threads

7

RKF ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 70: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E70

IndustrialAutomation

Rece

ptac

les

Drawing Number Part Number Lead Specs. Features Pinout

RKF 61-*MUL, CSA6x18 AWG105°C 1/2-14NPSM

Threads,Standard Threads

1. GN2. WH3. BU4. GY5. YE6. BNRKF 61-*M/S849

UL, CSA6x2 AWG105°C300 V

RKF 66-*MUL, CSA6x16 AWG105°C

1/2-14NPSMThreads,Heavy Duty

1. WH2. RD3. GN4. OG5. BK6. BU

RKF 66-*M/S849

UL, CSA6x22 AWG105°C300 V

RKF 68-*M

UL, CSA6x18 AWG105°C600 V, 9 A

See page E60 for dimensional drawings.Standard lead length is 0.5 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RKF .."; "RKFV .." indicates 316 stainless steel housing (leads only) and"RKFK .." indicates nylon housing.For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.

• Female Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

6-Wire minifast ® Receptacles, Front Mount, 1/2-14 NPSM Threads

7

RKF ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 71: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E71 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Drawing Number Part Number Lead Specs. Features Pinout

RSF 20-*M/NPTUL, CSA2x18 AWG105°C

1/2-14NPTThreads,Standard Duty

1. BN2. BU

RSF 26-*M/NPTUL, CSA2x16 AWG Leads105°C

1/2-14NPTThreads,Heavy Duty

1. WH2. BK

RSF 28-*M/NPT

UL, CSA2x18 AWG105°C600 V, 9 A

1/2-14NPTThreads,Heavy Duty

1. WH2. BK

RSF 30-*M/NPTUL, CSA3x18 AWG105°C

1/2-14NPTThreads,Standard Duty

1. GY/YE2. BN3. BU

RSF 31-*M/NPTUL, CSA3x18 AWG105°C

1/2-14NPTThreads,Standard Duty

1. BK2. BN3. BU

RSF 311-*M/NPTUL, CSA3x18 AWG105°C

Automotive ColorCode1/2-14NPT Threads 1. GN

2. RD/BK3. RD/WH

RSF 35-*M/NPTUL, CSA3x16 AWG105°C

Automotive ColorCode1/2-14NPT Threads

RSF 36-*M/NPTUL, CSA3x16 AWG105°C

1/2-14NPTThreads,Heavy Duty

1. GN2. BK3. WH

RSF 38-*M/NPT

UL, CSA3x18 AWG105°C600 V, 9 A

1/2-14NPTThreads,Heavy Duty

1. GN2. BK3. WH

See page E59 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RSF .."; "RSFV .." indicates 316 stainless steel housing (leads only).For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.

• Male Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

2 and 3-Wire minifast ® Receptacles, Front Mount, 1/2-14 NPT Threads

2

RSF ../NPT

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 72: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E72

IndustrialAutomation

Rece

ptac

les

Drawing Number Part Number Lead Specs. Features Pinout

RSF 40-*M/NPTUL, CSA4x18 AWG105°C

1/2-14NPTThreads,Standard Duty

1. BN2. WH3. BU4. BK

RSF 46-*M/NPTUL, CSA4x16 AWG105°C

1/2-14NPTThreads,Heavy Duty

1. BK2. WH3. RD4. GN

RSF 48-*M/NPT

UL, CSA4x18 AWG105°C600 V, 9 A

See page E59 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RSF .."; "RSFV .." indicates 316 stainless steel housing (leads only).For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.

• Male Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

4-Wire minifast ® Receptacles, Front Mount, 1/2-14 NPT Threads

2

RSF ../NPT

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 73: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E73 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Drawing Number Part Number Lead Specs. Features Pinout

RSF 50-*M/NPTUL, CSA5x18 AWG105°C

1/2-14NPTThreads,Standard Duty

1. BK2. BU3. GN/YE4. BN5. WH

RSF 511-*M/NPTUL, CSA5x18 AWG105°C

Automotive ColorCode1/2-14NPT Threads

1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BKRSF 55-*M/NPT

UL, CSA5x16 AWG105°C

Automotive ColorCode1/2-14NPT Threads

RSF 56-*M/NPTUL, CSA5x16 AWG105°C 1/2-14NPT

Threads,Heavy Duty

1. WH2. RD3. GN4. OG5. BKRSF 58-*M/NPT

UL, CSA5x18 AWG105°C300 V, 9 A

RSF 61-*M/NPTUL, CSA6x18 AWG105°C

1/2-14NPTThreads,Standard Duty

1. GN2. WH3. BU4. GY5. YE6. BN

RSF 66-*M/NPTUL, CSA6x16 AWG105°C 1/2-14NPT

Threads,Heavy Duty

1. WH2. RD3. GN4. OG5. BK6. BURSF 68-*M/NPT

UL, CSA6x18 AWG105°C600 V, 9 A

See page E59 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RSF .."; "RSFV .." indicates 316 stainless steel housing (leads only).For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.

• Male Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

5 and 6-Wire minifast ® Receptacles, Front Mount, 1/2-14 NPT Threads

2

RSF ../NPT

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 74: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E74

IndustrialAutomation

Rece

ptac

les

Drawing Number Part Number Lead Specs. Features Pinout

RSF 20-*M/M20UL, CSA2x18 AWG105°C

1/2-14NPTThreads,Standard Duty

1. BN2. BU

RSF 26-*M/M20UL, CSA2x16 AWG Leads105°C

1/2-14NPTThreads,Heavy Duty

1. WH2. BK

RSF 30-*M/M20UL, CSA3x18 AWG105°C

1/2-14NPTThreads,Standard Duty

1. GY/YE2. BN3. BU

RSF 31-*M/M20UL, CSA3x18 AWG105°C

1/2-14NPTThreads,Standard Duty

1. BK2. BN3. BU

RSF 311-*M/M20UL, CSA3x18 AWG105°C

Automotive ColorCode1/2-14NPT Threads 1. GN

2. RD/BK3. RD/WH

RSF 35-*M/M20UL, CSA3x16 AWG105°C

Automotive ColorCode1/2-14NPT Threads

RSF 36-*M/M20UL, CSA3x16 AWG105°C

1/2-14NPTThreads,Heavy Duty

1. GN2. BK3. WH

RSF 40-*M/M20UL, CSA4x18 AWG105°C

1/2-14NPTThreads,Standard Duty

1. BN2. WH3. BU4. BK

RSF 46-*M/M20UL, CSA4x16 AWG105°C

1/2-14NPTThreads,Heavy Duty

1. BK2. WH3. RD4. GN

See page E60 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RSF .."; "RSFV .." indicates 316 stainless steel housing (leads only).For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.

• Male Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

2, 3 and 4-Wire minifast ® Receptacles, Front Mount, M20 Threads

9

RSF ../M20

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 75: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E75 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Drawing Number Part Number Lead Specs. Features Pinout

RSF 50-*M/M20UL, CSA5x18 AWG105°C

1/2-14NPTThreads,Standard Duty

1. BK2. BU3. GN/YE4. BN5. WH

RSF 511-*M/M20UL, CSA5x18 AWG105°C

Automotive ColorCode1/2-14NPT Threads

1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BKRSF 55-*M/M20

UL, CSA5x16 AWG105°C

Automotive ColorCode1/2-14NPT Threads

RSF 56-*M/M20UL, CSA5x16 AWG105°C

1/2-14NPTThreads,Heavy Duty

1. WH2. RD3. GN4. OG5. BK

RSF 61-*M/M20UL, CSA6x18 AWG105°C

1/2-14NPTThreads,Standard Duty

1. GN2. WH3. BU4. GY5. YE6. BN

RSF 66-*M/M20UL, CSA6x16 AWG105°C

1/2-14NPTThreads,Heavy Duty

1. WH2. RD3. GN4. OG5. BK6. BU

See page E60 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RSF .."; "RSFV .." indicates 316 stainless steel housing (leads only).For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.

• Male Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

5 and 6-Wire minifast ® Receptacles, Front Mount, M20 Threads

9

RSF ../M20

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 76: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E76

IndustrialAutomation

Rece

ptac

les

Drawing Number Part Number Lead Specs. Features Pinout

RSF 6B6-*M/14.5/NPT6x16 AWG105°C

1/2-14NPT Threads

1. OG2. BU3. BK4. WH5. RD6. GN

RSF 76-*M/14.5/NPT7x16 AWG105°C

1/2-14NPT Threads

1. WH/BK2. BK3. WH4. RD5. OG6. BU7. GN

RSF 86-*M/14.5/NPT8x16 AWG105°C

1/2-14NPT Threads

1. OG2. BU3. WH/BK4. BK5. WH6. RD7. GN8. RD/BK

RSF 6B6-*M/14.75/NPT6x16 AWG105°C

3/4-14NPT Threads

1. OG2. BU3. BK4. WH5. RD6. GN

RSF 76-*M/14.75/NPT7x16 AWG105°C

3/4-14NPT Threads

1. WH/BK2. BK3. WH4. RD5. OG6. BU7. GN

RSF 86-*M/14.75/NPT8x16 AWG105°C

3/4-14NPT Threads

1. OG2. BU3. WH/BK4. BK5. WH6. RD7. GN8. RD/BK

See page E59 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.1/2-14 receptacles recommend 13/16" (21.0 mm) hole for panel mounting. 3/4-14 receptacles recommend 1-1/16" (27.0 mm) hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RSF .."; "RSFV .." indicates 316 stainless steel housing (leads only).For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.

• Male Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 68Protection

• 600 V, 8 A

6, 7 and 8-Wire minifast ® "B" Size Receptacles, Front Mount

3

"B" Style RSF ..1/2-14/NPT

4

"B" Style RSF ..3/4-14/NPT

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 77: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E77 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Drawing Number Part Number Lead Specs. Features Pinout

RSF 96-*M/14.5/NPT9x16 AWG105°C

1/2-14 NPTThreads

1. OG2. BU3. RD/BK4. GN/BK5. WH

6. RD7. GN8. WH/BK9. BK

RSF 106-*M/14.5/NPT10x16 AWG105°C

1/2-14 NPTThreads

1. OG2. BU3. WH/BK4. RD/BK5. GN/BK

6. OG/BK7. RD8. GN9. BK10. WH

RSF 126-*M/14.5/NPT12x16 AWG105°C

1/2-14 NPTThreads

1. OG2. BU3. WH/BK4. RD/BK5. GN/BK6. OG/BK

7. BU/BK8. BK/WH9. GN10. RD11. WH12. BK

RSF 96-*M/14.75/NPT9x16 AWG105°C

3/4-14 NPTThreads

1. OG2. BU3. RD/BK4. GN/BK5. WH

6. RD7. GN8. WH/BK9. BK

RSF 106-*M/14.75/NPT10x16 AWG105°C

3/4-14 NPTThreads

1. OG2. BU3. WH/BK4. RD/BK5. GN/BK

6. OG/BK7. RD8. GN9. BK10. WH

RSF 126-*M/14.75/NPT12x16 AWG105°C

3/4-14 NPTThreads

1. OG2. BU3. WH/BK4. RD/BK5. GN/BK6. OG/BK

7. BU/BK8. BK/WH9. GN10. RD11. WH12. BK

See page E59 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.

Standard housing material is nickel plated cast zinc.. "RSF .."; "RSFV .." indicates 316 stainless steel housing (leads only).For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.

• Male Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 68Protection

• 600 V, 8 A

9, 10 and 12-Wire minifast ® "C" Size Receptacles, Front Mount

5

"C" Style RSF .. 1/2-14 NPT

6

"C" Style RSF ..3/4-14 NPT

1/2-14 receptacles recommend 7/8" (22.0 mm) hole for panel mounting. 3/4-14 receptacles recommend 1-1/16" (27.0 mm) hole for panel mounting.

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 78: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E78

IndustrialAutomation

Rece

ptac

les

Drawing Number Part Number Lead Specs. Features Pinout

RKF 20-*M/NPTUL, CSA2x18 AWG105°C

1/2-14NPTThreads,Standard Duty

1. BN2. BU

RKF 26-*M/NPTUL, CSA2x16 AWG Leads105°C

1/2-14NPTThreads,Heavy Duty

1. WH2. BK

RKF 30-*M/NPTUL, CSA3x18 AWG105°C

1/2-14NPTThreads,Standard Duty

1. GN/YE2. BN3. BU

RKF 31-*M/NPTUL, CSA3x18 AWG105°C

1/2-14NPTThreads,Standard Duty

1. BK2. BN3. BU

RKF 311-*M/NPTUL, CSA3x18 AWG105°C

Automotive ColorCode1/2-14NPT Threads 1. GN

2. RD/BK3. RD/WH

RKF 35-*M/NPTUL, CSA3x16 AWG105°C

Automotive ColorCode1/2-14NPT Threads

RKF 36-*M/NPTUL, CSA3x16 AWG105°C

1/2-14NPTThreads,Heavy Duty

1. GN2. BK3. WH

See page E60 for dimensional drawings.Standard lead length is 0.5 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RKF .."; "RKFV .." indicates 316 stainless steel housing (leads only).For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.

• Female Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

2 and 3-Wire minifast ® Receptacles, Front Mount, 1/2-14 NPT Threads

8

RKF ../NPT

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 79: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E79 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Drawing Number Part Number Lead Specs. Features Pinout

RKF 40-*M/NPTUL, CSA4x18 AWG105°C

1/2-14NPTThreads,Standard Duty

1. BN2. WH3. BU4. BK

RKF 46-*M/NPTUL, CSA4x16 AWG105°C

1/2-14NPTThreads,Heavy Duty

1. BK2. WH3. RD4. GN

RKF 48-*M/NPT

UL, CSA4x18 AWG105°C600 V, 9 A

See page E60 for dimensional drawings.Standard lead length is 0.5 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RKF .."; "RKFV .." indicates 316 stainless steel housing (leads only).For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.

• Female Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

4-Wire minifast ® Receptacles, Front Mount, 1/2-14 NPT Threads

8

RKF ../NPT

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 80: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E80

IndustrialAutomation

Rece

ptac

les

Drawing Number Part Number Lead Specs. Features Pinout

RKF 50-*M/NPTUL, CSA5x18 AWG105°C

1/2-14NPTThreads,Standard Duty

1. BK2. BU3. GN/YE4. BN5. WH

RKF 511-*M/NPTUL, CSA5x18 AWG105°C

Automotive ColorCode1/2-14NPT Threads

1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BKRKF 55-*M/NPT

UL, CSA5x16 AWG105°C

Automotive ColorCode1/2-14NPT Threads

RKF 56-*M/NPTUL, CSA5x16 AWG105°C 1/2-14NPT

Threads,Heavy Duty

1. WH2. RD3. GN4. OG5. BKRKF 58-*M/NPT

UL, CSA5x18 AWG105°C300 V, 9 A

RKF 61-*M/NPTUL, CSA6x18 AWG105°C

1/2-14NPTThreads,Standard Duty

1. GN2. WH3. BU4. GY5. YE6. BN

RKF 66-*M/NPTUL, CSA6x16 AWG105°C 1/2-14NPT

Threads,Heavy Duty

1. WH2. RD3. GN4. OG5. BK6. BURKF 68-*M/NPT

UL, CSA6x18 AWG105°C600 V, 9 A

See page E60 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RKF .."; "RKFV .." indicates 316 stainless steel housing (leads only).For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.

• Female Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

5 and 6-Wire minifast ® Receptacles, Front Mount, 1/2-14 NPT Threads

8

RKF ../NPT

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 81: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E81 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Drawing Number Part Number Lead Specs. Features Pinout

RKF 20-*M/M20UL, CSA2x18 AWG105°C

1/2-14NPTThreads,Standard Duty

1. BN2. BU

RKF 30-*M/M20UL, CSA2x16 AWG Leads105°C

1/2-14NPTThreads,Heavy Duty

1. WH2. BK

RKF 31-*M/M20UL, CSA3x18 AWG105°C

1/2-14NPTThreads,Standard Duty

1. GN/YE2. BN3. BU

RKF 311-*M/M20UL, CSA3x18 AWG105°C

1/2-14NPTThreads,Standard Duty

1. BK2. BN3. BU

RKF 35-*M/M20UL, CSA3x18 AWG105°C

Automotive ColorCode1/2-14NPT Threads 1. GN

2. RD/BK3. RD/WH

RKF 36-*M/M20UL, CSA3x16 AWG105°C

Automotive ColorCode1/2-14NPT Threads

RKF 40-*M/M20UL, CSA3x16 AWG105°C

1/2-14NPTThreads,Heavy Duty

1. GN2. BK3. WH

RKF 46-*M/M20UL, CSA4x18 AWG105°C

1/2-14NPTThreads,Standard Duty

1. BN2. WH3. BU4. BK

See page E60 for dimensional drawings.Standard lead length is 0.5 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RKF .."; "RKFV .." indicates 316 stainless steel housing (leads only).For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.

• Female Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

2, 3 and 4-Wire minifast ® Receptacles, Front Mount, M20 Threads

10

RKF ../M20

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 82: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E82

IndustrialAutomation

Rece

ptac

les

Drawing Number Part Number Lead Specs. Features Pinout

RKF 50-*M/M20UL, CSA5x18 AWG105°C

1/2-14NPTThreads,Standard Duty

1. BK2. BU3. GN/YE4. BN5. WH

RKF 511-*M/M20UL, CSA5x18 AWG105°C

Automotive ColorCode1/2-14NPT Threads

1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BKRKF 55-*M/M20

UL, CSA5x16 AWG105°C

Automotive ColorCode1/2-14NPT Threads

RKF 56-*M/M20UL, CSA5x16 AWG105°C

1/2-14NPTThreads,Heavy Duty

1. WH2. RD3. GN4. OG5. BK

RKF 61-*M/M20UL, CSA6x18 AWG105°C

1/2-14NPTThreads,Standard Duty

1. GN2. WH3. BU4. GY5. YE6. BN

RKF 66-*M/M20UL, CSA6x16 AWG105°C

1/2-14NPTThreads,Heavy Duty

1. WH2. RD3. GN4. OG5. BK6. BU

See page E60 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Receptacles require a 13/16" (21 mm) clearance hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RKF .."; "RKFV .." indicates 316 stainless steel housing (leads only).For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.

• Female Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

5 and 6-Wire minifast ® Receptacles, Front Mount, M20 Threads

10

RKF ../M20

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 83: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E83 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Drawing Number Part Number Lead Specs. Features Pinout

RKF 6B6-*M/14.5/NPT6x16 AWG105°C

1/2-14 NPTThreads

1. OG2. BU3. BK4. WH5. RD6. GN

RKF 76-*M/14.5/NPT7x16 AWG105°C

1/2-14 NPTThreads

1. WH/BK2. BK3. WH4. RD5. OG6. BU7. GN

RKF 86-*M/14.5/NPT8x16 AWG105°C

1/2-14 NPTThreads

1. OG2. BU3. WH/BK4. BK5. WH6. RD7. GN8. RD/BK

RKF 6B6-*M/14.75/NPT6x16 AWG105°C

3/4-14 NPTThreads

1. OG2. BU3. BK4. WH5. RD6. GN

RKF 76-*M/14.75/NPT7x16 AWG105°C

3/4-14 NPTThreads

1. WH/BK2. BK3. WH4. RD5. OG6. BU7. GN

RKF 86-*M/14.75/NPT8x16 AWG105°C

3/4-14 NPTThreads

1. OG2. BU3. WH/BK4. BK5. WH6. RD7. GN8. RD/BK

See page E60 for dimensional drawings.Standard lead length is 0.5 Meters. Consult factory for other lengths.

Standard housing material is nickel plated cast zinc.. "RKF .."; "RKFV .." indicates 316 stainless steel housing (leads only).For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.

• Female Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 68Protection

• 600 V, 8 A

6, 7 and 8-Wire minifast ® "B" Size Receptacles, Front Mount

11

RKF ../14.5/NPT

12

RKF ../14.75/NPT

1/2-14 receptacles recommend 7/8" (22.0 mm) hole for panel mounting. 3/4-14 receptacles recommend 1-1/16" (27.0 mm) hole for panel mounting.

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 84: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E84

IndustrialAutomation

Rece

ptac

les

Drawing Number Part Number Lead Specs. Features Pinout

RKF 96-*M/14.5/NPT9x16 AWG105°C

1/2-14 NPTThreads

1. OG2. BU3. RD/BK4. GN/BK5. WH

6. RD7. GN8. WH/BK9. BK

RKF 106-*M/14.5/NPT10x16 AWG105°C

1/2-14 NPTThreads

1. OG2. BU3. WH/BK4. RD/BK5. GN/BK

6. OG/BK7. RD8. GN9. BK10. WH

RKF 126-*M/14.5/NPT12x16 AWG105°C

1/2-14 NPTThreads

1. OG2. BU3. WH/BK4. RD/BK5. GN/BK6. OG/BK

7. BU/BK8. BK/WH9. GN10. RD11. WH12. BK

RKF 96-*M/14.75/NPT9x16 AWG105°C

3/4-14 NPTThreads

1. OG2. BU3. RD/BK4. GN/BK5. WH

6. RD7. GN8. WH/BK9. BK

RKF 106-*M/14.75/NPT10x16 AWG105°C

3/4-14 NPTThreads

1. OG2. BU3. WH/BK4. RD/BK5. GN/BK

6. OG/BK7. RD8. GN9. BK10. WH

RKF 126-*M/14.75/NPT12x16 AWG105°C

3/4-14 NPTThreads

1. OG2. BU3. WH/BK4. RD/BK5. GN/BK6. OG/BK

7. BU/BK8. BK/WH9. GN10. RD11. WH12. BK

See page E61 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.1/2-14 receptacles recommend 13/16" (21.0 mm) hole for panel mounting. 3/4-14 receptacles recommend 1-1/16" (27.0 mm) hole for panel mounting.Standard housing material is nickel plated cast zinc.. "RKF .."; "RKFV .." indicates 316 stainless steel housing (leads only).For locknuts to be included, add "W/LN" to the end of the part number.To specify PVC jacketed cable, add "/S717" to the end of the part number.

• Female Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 68Protection

• 600 V, 8 A

9, 10 and 12-Wire minifast ® "C" Size Receptacles, Front Mount

13

RKF ../14.5/NPT

14

RKF ../14.75/NPT

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 85: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E85 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Drawing Number Part Number Lead Specs. Features Pinout

RSFP 20-*MUL, CSA2x18 AWG105°C

M30x1.5 Threads,Standard Duty

1. BN2. BU

RSFP 26-*MUL, CSA2x16 AWG105°C

M30x1.5 Threads,Heavy Duty

1. WH2. BK

RSFP 28-*M

UL, CSA2x18 AWG105°C600 V, 9 A

RSFP 30-*MUL, CSA3x18 AWG105°C

M30x1.5 Threads,Standard Duty

1. GN/YE2. BN3. BU

RSFP 31-*MUL, CSA3x18 AWG105°C

M30x1.5 Threads,Standard Duty

1. BK2. BN3. BU

RSFP 311-*MUL, CSA3x18 AWG105°C

M30x1.5 Threads,Automotive ColorCode 1. GN

2. RD/BK3. RD/WH

RSFP 35-*MUL, CSA3x16 AWG105°C

Automotive ColorCode,M30x1.5 Threads

RSFP 36-*MUL, CSA3x16 AWG105°C

M30x1.5 Threads,Heavy Duty

1. GN2. BK3. WH

RSFP 38-*M

UL, CSA3x18 AWG105°C600 V, 9 A

See page E61 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Standard housing material is nickel plated cast zinc.. "RSFP .."; "RSFPV .." indicates 316 stainless steel housing (leads only).To specify PVC jacketed cable, add "/S717" to the end of the part number.

15

RSFP ..

• Male Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 68Protection

• 600 V, 8 A

2 and 3-Wire minifast ® Receptacles, Back Panel Mount

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 86: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E86

IndustrialAutomation

Rece

ptac

les

Drawing Number Part Number Lead Specs. Features Pinout

RSFP 40-*MUL, CSA4x18 AWG105°C

M30x1.5 Threads,Standard Duty

1. BN2. WH3. BU4. BK

RSFP 46-*MUL, CSA4x16 AWG105°C

M30x1.5 Threads,Heavy Duty

1. BK2. WH3. RD4. GN

RSFP 48-*M

UL, CSA4x18 AWG105°C600 V, 9 A

See page E61 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Standard housing material is nickel plated cast zinc.. "RSFP .."; "RSFPV .." indicates 316 stainless steel housing (leads only).To specify PVC jacketed cable, add "/S717" to the end of the part number.

15

RSFP ..

• Male Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 68Protection

• 600 V, 8 A

4-Wire minifast ® Receptacles, Back Panel Mount

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 87: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E87 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Drawing Number Part Number Lead Specs. Features Pinout

RSFP 50-*MUL, CSA5x18 AWG105°C

M30x1.5 Threads,Standard Duty

1. BK2. BU3. GN/YE4. BN5. WH

RSFP 511-*MUL, CSA5x18 AWG105°C

Automotive ColorCode,M30x1.5 Threads

1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BKRSFP 55-*M

UL, CSA5x16 AWG105°C

Automotive ColorCode,M30x1.5 Threads

RSFP 56-*MUL, CSA5x16 AWG105°C

M30x1.5 Threads,Heavy Duty

1. WH2. RD3. GN4. OG5. BKRSFP 58-*M

UL, CSA5x18 AWG105°C300 V, 9 A

RSFP 61-*MUL, CSA6x18 AWG105°C

M30x1.5 Threads,Standard Duty

1. GN2. WH3. BU4. GY5. YE6. BN

RSFP 66-*MUL, CSA6x16 AWG105°C

M30x1.5 Threads,Heavy Duty

1. WH2. RD3. GN4. OG5. BK6. BURSFP 68-*M

UL, CSA6x18 AWG105°C600 V, 9 A

See page E61 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Standard housing material is nickel plated cast zinc.. "RSFP .."; "RSFPV .." indicates 316 stainless steel housing (leads only).To specify PVC jacketed cable, add "/S717" to the end of the part number.

15

RSFP ..

• Male Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 68Protection

• 600 V, 8 A

5 and 6-Wire minifast ® Receptacles, Back Panel Mount

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 88: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E88

IndustrialAutomation

Rece

ptac

les

2, 3 and 4-Wire minifast ® Receptacles, Back Panel Mount

Drawing Number Part Number Lead Specs. Features Pinout

RKFP 20-*MUL, CSA2x18 AWG105°C

M30x1.5 Threads,Standard Duty

1. BN2. BU

RKFP 26-*MUL, CSA2x16 AWG105°C

M30x1.5 Threads,Heavy Duty

1. Wh2. BK

RKFP 28-*M

UL, CSA2x18 AWG105°C600 V, 9 A

RKFP 30-*MUL, CSA3x18 AWG105°C

M30x1.5 Threads,Standard Duty

1. GN/YE2. BN3. BU

RKFP 31-*MUL, CSA3x18 AWG105°C

M30x1.5 Threads,Standard Duty

1. BK2. BN3. BU

RKFP 311-*MUL, CSA3x18 AWG105°C

M30x1.5 Threads,Automotive ColorCode

1. GN2. RD/BK3. RD/Wh

RKFP 35-*MUL, CSA3x16 AWG105°C

Automotive ColorCode,M30x1.5 Threads

1. GN2. RD/BK3. RD/Wh

RKFP 36-*MUL, CSA3x16 AWG105°C

M30x1.5 Threads,Heavy Duty

1. GN2. BK3. Wh

RKFP 38-*M

UL, CSA3x18 AWG105°C600 V, 9 A

See page E61 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Standard housing material is nickel plated cast zinc.. "RKFP .."; "RKFPV .." indicates 316 stainless steel housing (leads only).To specify PVC jacketed cable, add "/S717" to the end of the part number.

• Female Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 68Protection

• 600 V, 8 A

16

RKFP ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 89: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E89 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

2, 3 and 4-Wire minifast ® Receptacles, Back Panel Mount

Drawing Number Part Number Lead Specs. Features Pinout

RKFP 40-*MUL, CSA4x18 AWG105°C

M30x1.5 Threads,Standard Duty

1. BN2. Wh3. BU4. BK

RKFP 46-*M

UL, CSA4x16 AWG105°C

M30x1.5 Threads,Heavy Duty

1. BK2. Wh3. RD4. GN

RKFP 48-*M

UL, CSA4x18 AWG105°C600 V, 9 A

See page E61 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Standard housing material is nickel plated cast zinc.. "RKFP .."; "RKFPV .." indicates 316 stainless steel housing (leads only).To specify PVC jacketed cable, add "/S717" to the end of the part number.

• Female Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 68Protection

• 600 V, 8 A

16

RKFP ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 90: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E90

IndustrialAutomation

Rece

ptac

les

Drawing Number Part Number Lead Specs. Features Pinout

RKFP 50-*MUL, CSA5x18 AWG105°C

M30x1.5 Threads,Standard Duty

1. BK2. BU3. GN/YE4. BN5. WH

RKFP 511-*MUL, CSA5x18 AWG105°C

Automotive ColorCode,M30x1.5 Threads

1. RD/WH2. RD/BU3. GN4. RD/OG5. RD/BKRKFP 55-*M

UL, CSA5x16 AWG105°C

Automotive ColorCode,M30x1.5 Threads

RKFP 56-*MUL, CSA5x16 AWG105°C

M30x1.5 Threads,Heavy Duty

1. WH2. RD3. GN4. OG5. BKRKFP 58-*M

UL, CSA5x18 AWG105°C300 V, 9 A

RKFP 61-*MUL, CSA6x18 AWG105°C

M30x1.5 Threads,Standard Duty

1. GN2. WH3. BU4. GY5. YE6. BN

RKFP 66-*MUL, CSA6x16 AWG105°C

M30x1.5 Threads,Heavy Duty

1. WH2. RD3. GN4. OG5. BK6. BURKFP 68-*M

UL, CSA6x18 AWG105°C600 V, 9 A

See page E61 for dimensional drawings.Standard lead length is 0.3 Meters. Consult factory for other lengths.Standard housing material is nickel plated cast zinc.. "RKFP .."; "RKFPV .." indicates 316 stainless steel housing (leads only).To specify PVC jacketed cable, add "/S717" to the end of the part number.

16

RKFP ..

• Female Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 68Protection

• 600 V, 8 A

5 and 6-Wire minifast ® Receptacles, Back Panel Mount

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 91: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E91 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Drawing Number Part Number Lead Specs. Features Pinout

RSF 40-PCB4-pin PCB Pins105°C

PG 11 Threads

RSF 50-PCB5-pin PCB Pins105°C

RSFL 262-pin Solder Cups105°C

1/2 - 14NPSM Threads

RSFL 363-pin Solder Cups105°C

RSFL 464-pin Solder Cups105°C

RSFL 565-pin Solder Cups105°C

RSFL 666-pin Solder Cups105°C

See page E62 for dimensional drawings.Standard housing material is nickel plated cast zinc.. "RSFL .."; "RSFVL .." indicates 316 stainless steel housing (leads only). No stainless option for "PCB".For locknuts to be included, add "W/LN" to the end of the part number.

18

RSFL ..

• Male Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

minifast ® PCB Pins and Solder Cup Receptacles

5-pin PCB Board Layout4-pin PCB Board Layout

17

RSF ..-PCB

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 92: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E92

IndustrialAutomation

Rece

ptac

les

Drawing Number Part Number Lead Specs. Features Pinout

RKF 40-PCBNickel Plated Brass4-pin PCB Pins80°C

PG 11 Threads

RKF 50-PCBNickel Plated Brass5-pin PCB Pins80°C

RKFL 26

Nickel Plated CastZinc2-pin Solder Cups80°C

1/2 - 14NPSM Threads

RKFL 36

Nickel Plated CastZinc3-pin Solder Cups80°C

RKFL 46

Nickel Plated CastZinc4-pin Solder Cups80°C

RKFL 56

Nickel Plated CastZinc5-pin Solder Cups80°C

RKFL 66

Nickel Plated CastZinc6-pin Solder Cups80°C

See page E62 for dimensional drawings.Standard housing material is nickel plated cast zinc.. "RKFL .."; "RKFVL .." indicates 316 stainless steel housing (leads only). No stainless option for "PCB".

19

RKF ..-PCB

20

RKFL ..

• Female Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

minifast ® PCB Pins and Solder Cup Receptacles

5-pin PCB Board Layout4-pin PCB Board Layout

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 93: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E93 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Drawing Number Part Number Specs. Features Male Pinout Female Pinout

RSF RKF 20/22Nickel Plated Brass2-pin105°C

Thrust Washer andPanel KeywayPrevent Rotation -7/8-16UN Threads

RSF RKF 30/22Nickel Plated Brass3-pin105°C

RSF RKF 40/22Nickel Plated Brass4-pin105°C

RSF RKF 50/22Nickel Plated Brass5-pin105°C

RSF RKF 60/22Nickel Plated Brass6-pin105°C

See page E62 for dimensional drawings.Standard housing material is nickel plated brass .. "RSF RKF.."; "RSFV RKFV.." indicates stainless steel housing.

21

RSF RKF ..

• Male to Female Receptacles

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

• 600 V, 9 A

minifast ® Bulkhead Feed-Thru Receptacles

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 94: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E94

IndustrialAutomation

Rece

ptac

les

Notes:

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 95: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E95 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Drawing Number Part Number Cable Application Pinout

B 4131-0/9

Glass filled nylonPG 9 cable gland,accepts 6-8 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 12 A

Mates with all 3-pincordsets andreceptacles

B 4131-0/13.5

Glass filled nylonPG 13.5 cable gland,accepts 10-12 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 12 A

Mates with all 3-pincordsets andreceptacles

B 4141-0/9

Glass filled nylonPG 9 cable gland,accepts 6-8 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 9 A

Mates with all 4-pincordsets andreceptacles

B 4141-0/13.5

Glass filled nylonPG 13.5 cable gland,accepts 10-12 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 9 A

Mates with all 4-pincordsets andreceptacles

• Straight Female Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

3 and 4-Pin minifast ® Field Wireable Connectors

B 41 ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 96: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E96

IndustrialAutomation

Fiel

dW

irea

bles

Drawing Number Part Number Cable Application Pinout

B 4151-0/9

Glass filled nylonPG 9 cable gland,accepts 6-8 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 9 A

Mates with all 5-pincordsets andreceptacles

B 4151-0/13.5

Glass filled nylonPG 13.5 cable gland,accepts 10-12 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 9 A

Mates with all 5-pincordsets andreceptacles

B 4151-0/16

Glass filled nylonPG 16 cable gland,accepts 12-14 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 9 A

Mates with all 5-pincordsets andreceptacles

B 71121-0/21

Glass filled nylonaccepts 18 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C600 V, 9 A

Mates with all 12-pincordsets andreceptacles

• Straight Female Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

5 and 12-Pin minifast ® Field Wireable Connectors

B 711 ..

B 41 ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 97: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E97 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Drawing Number Part Number Cable Application Pinout

B 4231-0/9

Glass filled nylonPG 9 cable gland,accepts 6-8 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 12 A

Mates with all 3-pincordsets andreceptacles

B 4241-0/9

Glass filled nylonPG 9 cable gland,accepts 6-8 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 9 A

Mates with all 4-pincordsets andreceptacles

B 4251-0/9

Glass filled nylonPG 9 cable gland,accepts 6-8 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 9 A

Mates with all 5-pincordsets andreceptacles

3, 4 and 5-Pin minifast ® Field Wireable Connectors

B 42 ..

• Right Angle Female Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 98: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E98

IndustrialAutomation

Fiel

dW

irea

bles

Drawing Number Part Number Cable Application Pinout

BS 4131-0/9

Glass filled nylonPG 9 cable gland,accepts 6-8 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85° C250 V, 12 A

Mates with all 3-pincordsets andreceptacles

BS 4131-0/13.5

Glass filled nylonPG 13.5 cable gland,accepts 10-12 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 12 A

Mates with all 3-pincordsets andreceptacles

BS 4141-0/9

Glass filled nylonPG 9 cable gland,accepts 6-8 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 9 A

Mates with all 4-pincordsets andreceptacles

BS 4141-0/13.5

Glass filled nylonPG 13.5 cable gland,accepts 10-12 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 9 A

Mates with all 4-pincordsets andreceptacles

3 and 4-Pin minifast ® Field Wireable Connectors

BS 41 ..

• Straight Male Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 99: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E99 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Drawing Number Part Number Cable Application Pinout

BS 4151-0/9

Glass filled nylonPG 9 cable gland,accepts 6-8 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 9 A

Mates with all 5-pincordsets andreceptacles

BS 4151-0/13.5

Glass filled nylonPG 13.5 cable gland,accepts 10-12 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 9 A

Mates with all 5-pincordsets andreceptacles

BS 4151-0/16

Glass filled nylonPG 16 cable gland,accepts 12-14 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 9 A

Mates with all 5-pincordsets andreceptacles

BS 71121-0/21

Glass filled nylonaccepts 18 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C600 V, 9 A

Mates with all 12-pincordsets andreceptacles

5 and 12-Pin minifast ® Field Wireable Connectors

BS 711 ..

• Straight Male Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

BS 41 ..

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 100: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E100

IndustrialAutomation

Fiel

dW

irea

bles

Drawing Number Part Number Cable Application Pinout

BS 4231-0/9

Glass filled nylonPG 9 cable gland,accepts 6-8 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 12 A

Mates with all 3-pincordsets andreceptacles

BS 4241-0/9

Glass filled nylonPG 9 cable gland,accepts 6-8 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 9 A

Mates with all 4-pincordsets andreceptacles

BS 4251-0/9

Glass filled nylonPG 9 cable gland,accepts 6-8 mm cable diameterScrew terminals,accepts up to 16 AWG conductors85°C250 V, 9 A

Mates with all 5-pincordsets andreceptacles

3, 4 and 5-Pin minifast ® Field Wireable Connectors

BS 42 ..

• Right Angle Male Connectors

• NEMA 1, 3, 4, 6P and IEC IP 67Protection

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 101: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E101 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Drawing Number Part Number Cable Application Wiring Diagram

CA-1/RKF 30

Nylon Housing80°C250 V, 9A

Attaches to standard conduitbody for transition to 3-wireminifast connector

CA-1/RKF 40Attaches to standard conduitbody for transition to 4-wireminifast connector

CA-1/RKF 50Attaches to standard conduitbody for transition to 5-wireminifast connector

Standard receptacle housing material is nickel plated brass.."RKF"; "RKFV" indicates 316 stainless steel.Example: CA-2/RKFV 50.

minifast ® Conduit Adapters, 1 Port

• Attaches to Standard Conduit Bodies for Transition to 3-5 Wireminifast Connectors

• Gasket and 8-32 x 1/2 Mounting Screws

• IP 67 Protection (only when all receptacles are mated orcovered with plugs)

Female Male

3-Pin 4-Pin 5-Pin 3-Pin 4-Pin 5-Pin

Pinouts

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 102: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E102

IndustrialAutomation

Fiel

dW

irea

bles

Drawing Number Part Number Cable Application Wiring Diagram

CA-2/RKF 30

Nylon Housing80°C250 V, 9A

Attaches to standard conduitbody for transition to 3-wireminifast connector

CA-2/RKF 30/S651Attaches to standard conduitbody for transition to 3-wireminifast connector, parallelwired

CA-2/RKF 40Attaches to standard conduitbody for transition to 4-wireminifast connector

CA-2/RKF 40/S651

Attaches to standard conduitbody for transition to 4-wireminifast connector, parallelwired

CA-2/RKF 50Attaches to standard conduitbody for transition to 5-wireminifast connector

CA-2/RKF 50/S651

Attaches to standard conduitbody for transition to 5-wireminifast connector, parallelwired

Standard receptacle housing material is nickel plated brass.."RKF"; "RKFV" indicates 316 stainless steel.Example: CA-2/RKFV 50.For pinouts see bottom of page E87.

minifast ® Conduit Adapters, 2 Port

• Attaches to Standard Conduit Bodies for Transition to 3-5 Wire minifastConnectors

• Gasket and 8-32 x 1/2 Mounting Screws

• IP 67 Protection (only when all receptacles are mated or covered with plugs)

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 103: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E103 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

minifast ® Tees

Housing Style Part Number Cable Features Pinout

RSM-2RKM 20

PUR1 Male and 2 femaleconnectors250 V,9.0 A80°C

Parallel wired,2 conductor

RSM-2RKM 30

PUR1 Male and 2 femaleconnectors250 V,9.0 A80°C

Parallel wired,3 conductor

RSM-2RKM 40

PUR1 Male and 2 femaleconnectors250 V,9.0 A80°C

Parallel wired,4 conductor

RSM-2RKM 50

PUR1 Male and 2 femaleconnectors250 V,9.0 A80°C

Parallel wired,5 conductor

RSM 50-2RKM 30

PUR1 Male 5-pinconnector, 2 female3-pin connectors250 V,9.0 A80°C

Combine 2cables into 1

Female Male

2-Pin 3-Pin 4-Pin 5-Pin 2-Pin 3-Pin 4-Pin 5-Pin

Pinouts

• Available with Parallel orJunction-style Wiring

• Simplifies Wiring Installations

• Tough Molded Polyurethane Body

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 104: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E104

IndustrialAutomation

Acce

ssor

ies

Housing Style Part Number Cable Features Pinout

RSM-2RKM 30-KM

PUR1 Male and 2 femaleconnectors250 V,9.0 A80°C

Parallelwired, 3conductor,keyway facingmaleconnector

RSM-2RKM 40 KM

PUR1 Male and 2 femaleconnectors250 V,9.0 A80°C

Parallelwired, 4conductor,keyway facingmaleconnector

RSM-2RKM 30-KF

PUR1 Male and 2 femaleconnectors250 V,9.0 A80°C

Parallelwired, 3conductor,keyway facingfemaleconnector

RSM-2RKM 40-KF

PUR1 Male and 2 femaleconnectors250 V,9.0 A80°C

Parallelwired, 4conductor,keyway facingfemaleconnector

minifast ® Tees

Female Male

3-Pin 4-Pin 3-Pin 4-Pin

Pinouts

• Drop Keyway Facing Male orFemale Connector

• Available with Parallel Wiring

• Simplifies Wiring Installations

• Tough Molded Polyurethane Body

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 105: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E105 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Housing Style Part Number Cable Features Wiring Diagram

See above

RKM 30-*-RSM 50-RKM 30-*

PUR bodyTwo 3-pin female cordsets,PVC Yellow,3x18 AWG7.3 mm O.D.,one 5-pin male connector250 V,9.0 A80°C

Combine 2 cables into 1

RKM 40-*-RSM 40-RKM 40-*

PUR bodyTwo 4-pin female cordsets,PVC Yellow,4x18 AWG7.3 mm OD,one 4-pin male connector250 V,9.0 A80°C

Parallel Wired

RKM 301-*-RSM 301-RKM 301-*

PUR bodyTwo 3-pin female cordsets,PVC Yellow,3x18 AWG7.3 mm OD,one 3-pin male connector250 V9.0 A80°C

Combine 2 cables into 1,series wired

* Length in meters.Standard coupling nut material is nickel plated brass .. "RSM or RKM"; "RS or RK" indicates nylon and "RSV or RKV" indicates 316 stainless steel.

minifast ® Junction Tees, Cable on Female Branches

Female Male

3-Pin 4-Pin 5-Pin 3-Pin 4-Pin 5-Pin

Pinouts

• Junction-style Wiring

• Simplifies Wiring Installations

• Tough Molded Polyurethane Body

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 106: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E106

IndustrialAutomation

Acce

ssor

ies

Housing Style Part Number Specs Features Wiring Diagram

See above

RKM 30-RSM 50-*-RKM 30

PUR body two 3-pin femaleconnectors,one 5-pin male cordset,PVC Yellow,5x18 AWG7.3 mm OD,250 V,9.0 A, 80°C

Combine 2 cables into 1

RKM 50-RSM 50-*-RKM 50

PUR bodyTwo 5-pin female connectors,one 5-pin male cordset,PVC Yellow,5x18 AWG7.3 mm OD,250 V,9.0 A, 80°C

Parallel wired

RKM 301-RSM 301-*-RKM 301

PUR bodyTwo 3-pin female connectors,one 3-pin male cordset,PVC Yellow,3x18 AWG7.3 mm OD,250 V,9.0 A, 80°C

Combine 2 cables into 1,series wired

* Length in meters.Standard coupling nut material is nickel plated brass .. "RSM or RKM"; "RS or RK" indicates nylon and "RSV or RKV" indicates 316 stainless steel.

minifast ® Junction Tees, Cable on Male Trunk

Female Male

3-Pin 5-Pin 3-Pin 5-Pin

Pinouts

• Junction-style Wiring

• Simplifies Wiring Installations

• Tough Molded Polyurethane Body

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 107: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E107 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

B2131-*M

Nylon300 V/ 4.0 A3x22 AWG70°C

Mates with 3-pincordsets,1/2 - 14NPSMThreads 1. Gn

2. Bn3. Bu

B1131-*M

Nickel plated brass300 V/ 4.0 A3x22 AWG70°C

Mates with 3-pincordsets,1/2 - 14NPSMThreads

B2131-*M/S523Nylon300 V/ 4.0A3x22 AWG70° C

Mates with 3-pincordsets,1/2 - 14NPSMThreads

1. Bk2. Bn3. Bu

B2141-*M

Nylon300 V/ 4.0 A4x22 AWG70°C

Mates with 4-pincordsets,1/2 - 14NPSMThreads

1. Bn2. Wh3. Bu4. Bk

B1141-*M

Nickel plated brass300 V/ 4.0 A4x22 AWG70°C

Mates with 4-pincordsets,1/2 - 14NPSMThreads

B1131-PG9-*M

Nickel plated brass300 V/ 4.0 A3x22 AWG70°C

Mates with 3-pincordsets,PG 9 Threads

1. Gn2. Bn3. Bu

B1141-PG9-*M

Nickel plated brass300 V/ 4.0 A4x22 AWG70°C

Mates with 4-pincordsets,PG 9 Threads

1. Bn2. Wh3. Bu4. Bk

B1151-PG9-*M

Nickel plated brass300 V/ 4.0 A5x22 AWG70°C

Mates with 5-pincordsets,PG 9 Threads

1. Bn2. Wh3. Bu4. Bk5. Gn

minifast ® Quick Disconnect Adapters

• Adapt to Standard minifastCordsets

• Available w/NPSM or PG 9Threads

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 108: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E108

IndustrialAutomation

Acce

ssor

ies

Housing Style Part Number Specs Features Wiring Diagram

RSM 40-FK 4.4

Nickel plated brass250 V,4 A80°C

Female eurofast ®,male minifast ®,4-pin

RSM 50-FK 4.5

Nickel plated brass250 V,4 A80°C

Female eurofast,male minifast,5-pin

RKM 30/SB3

Nickel plated brass250 V,4 A80°C

Female minifast,male microfast ®,3-pin

minifast ® Quick Disconnect Adapters

Female Male

3-Pin minifast 4-Pin eurofast 5-Pin eurofast 3-Pin microfast 4-Pin minifast 5-Pin minifast

Pinouts

• Convert minifast to eurofast ® ormicrofast ®

• Rugged Metal Connector

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 109: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

E109 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKIndustrial Connectivity Products

Drawing Part Number Specifications Application

RKM-CCNickel plated brass7/8-16UN threads6" stainless steel lanyard

Closure cap, mates to male cordsets,receptacles

RKMV-CCStainless steel7/8-16UN threads6" stainless steel lanyard

Closure cap, mates to male cordsets,receptacles

RSM-CCNickel plated brass7/8-16UN threads6" stainless steel lanyard

Closure cap, mates to femalecordsets, receptacles

RSMV-CCStainless steel7/8-16UN threads6" stainless steel lanyard

Closure cap, mates to femalecordsets, receptacles

RKF-CCNickel plated brass7/8-16UN threads6" stainless steel lanyard

Closure cap, mates to malereceptacles

RKFV-CCStainless steel7/8-16UN threads6" stainless steel lanyard

Closure cap, mates to malereceptacles

RSF-CCNickel plated brass7/8-16UN threads6" stainless steel lanyard

Closure cap, mates to femalereceptacles

RSFV-CCStainless steel7/8-16UN threads6" stainless steel lanyard

Closure cap, mates to femalereceptacles

RKF-MCNickel plated brass7/8-16UN threadsBUNA-N gasket

Closure cap, mates to malereceptacles

RKFV-MCStainless steel7/8-16UN threadsBUNA-N gasket

Closure cap, mates to malereceptacles

RSF-MCNickel plated brass7/8-16UN threadsBUNA-N gasket and O-ring

Closure cap, mates to femalecordsets, receptacles

RSFV-MCStainless steel7/8-16UN threadsBUNA-N gasket and O-ring

Closure cap, mates to femalecordsets, receptacles

minifast ® Accessories

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

Page 110: Industrial Connectivity Products (Available with 7/8-16 UN ... · E1 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 TURCK

TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com E110

IndustrialAutomation

Acce

ssor

ies

Drawing Part Number Specifications Application

DUST CAP RKM(50/PACKAGE)

NylonClosure cap, mates to junction boxesand female cordsets

DUST CAP RSM(50/PACKAGE)

NylonClosure cap, mates to junction boxesand male cordsets

FF 78 AL Anodized AluminumFemale adapter to be used with 2female coupling nuts

MB-MINITEE 1 Nylon

Mounting bracket for minifast tees

minifast ® Accessories

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com