inductive proximity switch ikl 010.05 gh series4.pdf · inductive proximity switch ikl 015.31 gh...

14
Inductive proximity switch IKL 010.05 GH 15.05.2002 Details are subject to change without notice. WG 210 Proxitron GmbH - Grtnerstr. 10 - D-25335 Elmshorn - Tel. 04121/2621-0 - Fax. 04121/24404 - [email protected] I363E Short circuit protected proximity switch with AC/DC 2-wire technology. The Sensor is suitable for higher ambient temperature by the increased temperature range. Technical Data Type IKL 010.05 GH Connection Art.-No. 2 m silicone cable (SIK) 2434D 5 m silicone cable (SIK) 7 m silicone cable (SIK) 2434D-5 2434D-7 20 m silicone cable (SIK) 2434D-20 Rated operating distance (Sn) 10 mm Output normally open Operating distance adjustable no Target steel St37, 1 mm thick 30 x 30 mm Location at metal flush Supply voltage (UB) 20 - 260 V AC/DC Power frequency 40 - 440 Hz Ripple voltage max. 15 % (DC) Load current max. 5 - 400 mA Short- time load current 0,8 A / 100 ms 2 A / 10 ms Short circuit protection yes Residual current (Ir) 1,7 mA / 260 V AC 1,0 mA / 24 V DC Voltage drop (Ud) 9 V Operating frequency AC/DC (f) 25 Hz / 100 Hz Switching hysteresis (H) 1 - 15 % Ambient temperature -20 ... +100 C Protection class IP 67 Function display LED Housing material plastic PBT Diagram of Connections

Upload: others

Post on 14-Jun-2020

42 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Inductive proximity switch IKL 010.05 GH Series4.pdf · Inductive proximity switch IKL 015.31 GH 21.01.2002 Details are subject to change without notice. WG 210 Proxitron GmbH - Gärtnerstr

Inductive proximity switchIKL 010.05 GH

15.05.2002 Details are subject to change without notice. WG 210

Proxitron GmbH - Gärtnerstr. 10 - D-25335 Elmshorn - Tel. 04121/2621-0 - Fax. 04121/24404 - [email protected] I363E

Short circuit protected proximity switch withAC/DC 2-wire technology.

The Sensor is suitable for higher ambienttemperature by the increased temperaturerange.

Technical DataType IKL 010.05 GH

Connection Art.-No.2 m silicone cable (SIK) 2434D5 m silicone cable (SIK)7 m silicone cable (SIK)

2434D-52434D-7

20 m silicone cable (SIK) 2434D-20

Rated operating distance (Sn) 10 mmOutput normally openOperating distance adjustable noTarget steel St37, 1 mm thick 30 x 30 mmLocation at metal flushSupply voltage (UB) 20 - 260 V AC/DCPower frequency 40 - 440 HzRipple voltage max. 15 % (DC)Load current max. 5 - 400 mAShort- time load current 0,8 A / 100 ms

2 A / 10 msShort circuit protection yesResidual current (Ir) 1,7 mA / 260 V AC

1,0 mA / 24 V DCVoltage drop (Ud) 9 VOperating frequency AC/DC (f) 25 Hz / 100 HzSwitching hysteresis (H) 1 - 15 %Ambient temperature -20 ... +100 °CProtection class IP 67Function display LEDHousing material plastic PBT

Diagram of Connections

Page 2: Inductive proximity switch IKL 010.05 GH Series4.pdf · Inductive proximity switch IKL 015.31 GH 21.01.2002 Details are subject to change without notice. WG 210 Proxitron GmbH - Gärtnerstr

Inductive proximity switchIKL 015.31 GH

21.01.2002 Details are subject to change without notice. WG 210

Proxitron GmbH - Gärtnerstr. 10 - D-25335 Elmshorn - Tel. 04121/2621-0 - Fax. 04121/24404 - [email protected] I367E

Short circuit protected proximity switch for10 � 55 V DC with 3-wire technology.NPN � normally openThe Sensor is suitable for higher ambienttemperature by the increased temperaturerange.

Technical DataType IKL 015.31 GH

Connection Art.-No.2 m silicone cable (SIK) 2319H20 m silicone cable (SIK) 2319H-20

Rated operating distance (Sn) 15 mmOutput NPN n. o.Operating distance adjustable noTarget steel St37, 1 mm thick 45 x 45 mmLocation at metal non flushSupply voltage (UB) 10 - 55 V DCRipple voltage max. 15 %Load current max. 0 - 400 mAShort- time load current 0,8 A / 100 ms

2 A / 10 msShort circuit protection yes, pulsingNo load current (I0) < 10 mAVoltage drop (Ud) 1,5 V / 50 mAOperating frequency (f) 200 HzSwitching hysteresis (H) 1 - 15 %Ambient temperature -20 ... +100 °CProtection class IP 67Function display LEDHousing material plastic PBT

Diagram of Connections

Page 3: Inductive proximity switch IKL 010.05 GH Series4.pdf · Inductive proximity switch IKL 015.31 GH 21.01.2002 Details are subject to change without notice. WG 210 Proxitron GmbH - Gärtnerstr

Inductive proximity switchIKL 015.30 GH

21.01.2002 Details are subject to change without notice. WG 210

Proxitron GmbH - Gärtnerstr. 10 - D-25335 Elmshorn - Tel. 04121/2621-0 - Fax. 04121/24404 - [email protected] I369E

Short circuit protected proximity switch for10�55 V DC with 3-wire technology.NPN � normally closedThe Sensor is suitable for higher ambienttemperature by the increased temperaturerange.

Technical DataType IKL 015.30 GH

Connection Art.-No.2 m silicone cable (SIK) 2319I20 m silicone cable (SIK) 2319I-20

Rated operating distance (Sn) 15 mmOutput NPN n. c.Operating distance adjustable noTarget steel St37, 1 mm thick 45 x 45 mmLocation at metal non flushSupply voltage (UB) 10 - 55 V DCRipple voltage max. 15 %Load current max. 0 - 400 mAShort- time load current 0,8 A / 100 ms

2 A / 10 msShort circuit protection yes, pulsingNo load current (I0) < 10 mAVoltage drop (Ud) 1,5 V / 50 mAOperating frequency (f) 200 HzSwitching hysteresis (H) 1 - 15 %Ambient temperature -20 ... +100 °CProtection class IP 67Function display LEDHousing material plastic PBT

Diagram of Connections

Page 4: Inductive proximity switch IKL 010.05 GH Series4.pdf · Inductive proximity switch IKL 015.31 GH 21.01.2002 Details are subject to change without notice. WG 210 Proxitron GmbH - Gärtnerstr

Inductive proximity switchIKL 015.05 GH

15.03.2006 Details are subject to change without notice. WG 210

Proxitron GmbH - Gärtnerstr. 10 - D-25335 Elmshorn - Tel. 04121/2621-0 - Fax. 04121/24404 - [email protected] I362E

Short circuit protected proximity switch withAC/DC 2-wire technology.

The Sensor is suitable for higher ambienttemperature by the increased temperaturerange.

Technical DataType IKL 015.05 GH

Connection Art.-No. 2 m silicone cable (SIK) 2377C 5 m silicone cable (SIK) 2377C-510 m silicone cable (SIK) 2377C-1015 m silicone cable (SIK) 2377C-1520 m silicone cable (SIK) 2377C-20

Rated operating distance (Sn) 15 mmOutput normally openOperating distance adjustable noTarget steel St37, 1 mm thick 45 x 45 mmLocation at metal non flushSupply voltage (UB) 20 - 260 V AC/DCPower frequency 40 - 440 HzRipple voltage max. 15 % (DC)Load current max. 5 - 400 mAShort- time load current 0,8 A / 100 ms

2 A / 10 msShort circuit protection yesResidual current (Ir) 1,7 mA / 260 V

AC1,0 mA / 24 V DC

Voltage drop (Ud) 9 VOperating frequency AC/DC (f) 25 Hz / 100 HzSwitching hysteresis (H) 1 - 15 %Ambient temperature -20 ... +100 °CProtection class IP 67Function display LEDHousing material plastic PBT

Diagram of Connections

Page 5: Inductive proximity switch IKL 010.05 GH Series4.pdf · Inductive proximity switch IKL 015.31 GH 21.01.2002 Details are subject to change without notice. WG 210 Proxitron GmbH - Gärtnerstr

Inductive proximity switchIKL 015.04 GH

06.03.2002 Details are subject to change without notice. WG 210

Proxitron GmbH - Gärtnerstr. 10 - D-25335 Elmshorn - Tel. 04121/2621-0 - Fax. 04121/24404 - [email protected] I327E

Short circuit protected proximity switch withAC/DC 2-wire technology.

The Sensor is suitable for higher ambienttemperature by the increased temperaturerange.

Technical DataType IKL 015.04 GH

Connection Art.-No.2 m silicone cable (SIK) 2376E15 m silicone cable (SIK) 2376E-1520 m Silikonkabel (SIK) 2376E-20

Rated operating distance (Sn) 15 mmOutput normally closeOperating distance adjustable noTarget steel St37, 1 mm thick 45 x 45 mmLocation at metal non flushSupply voltage (UB) 20 - 260 V AC/DCPower frequency 40 - 440 HzRipple voltage max. 15 % (DC)Load current max. 5 - 400 mAShort- time load current 0,8 A / 100 ms

2 A / 10 msShort circuit protection yesResidual current (Ir) 1,7 mA / 260 V

AC1,0 mA / 24 V DC

Voltage drop (Ud) 9 VOperating frequency AC/DC (f) 25 Hz / 100 HzSwitching hysteresis (H) 1 - 15 %Ambient temperature -20 ... +100 °CProtection class IP 67Function display LEDHousing material plastic PBT

Diagram of Connections

Page 6: Inductive proximity switch IKL 010.05 GH Series4.pdf · Inductive proximity switch IKL 015.31 GH 21.01.2002 Details are subject to change without notice. WG 210 Proxitron GmbH - Gärtnerstr

Inductive proximity switchIKL 010.33 GH

04.12.2006 Details are subject to change without notice. WG 210

Proxitron GmbH - Gärtnerstr. 10 - D-25335 Elmshorn - Tel. 04121/2621-0 - Fax. 04121/24404 - [email protected] I366E

Short circuit protected proximity switch for10–55 V DC with 3-wire technology.PNP – normally open

The Sensor is suitable for higher ambienttemperature by the increased temperaturerange.

Technical Data

Type IKL 010.33 GH

Connection Art.-No. 2 m silicone cable (SIK) 2434H 5 m silicone cable (SIK) 2434H-510 m silicone cable (SIK) 2434H-1015 m silicone cable (SIK) 2434H-1520 m silicone cable (SIK) 2434H-20

Rated operating distance (Sn) 10 mm

Output PNP n. o.

Operating distance adjustable no

Target steel St37, 1 mm thick 30 x 30 mm

Location at metal flush

Supply voltage (UB) 10 - 55 V DC

Ripple voltage max. 15 %

Load current max. 0 - 400 mA

Short- time load current 0,8 A / 100 ms2 A / 10 ms

Short circuit protection yes, pulsing

No load current (I0) < 10 mA

Voltage drop (Ud) 1,5 V / 50 mA

Operating frequency (f) 200 Hz

Switching hysteresis (H) 1 - 15 %

Ambient temperature -20 ... +100 °C

Protection class IP 67

Function display LED

Housing material plastic PBT

Diagram of Connections

Page 7: Inductive proximity switch IKL 010.05 GH Series4.pdf · Inductive proximity switch IKL 015.31 GH 21.01.2002 Details are subject to change without notice. WG 210 Proxitron GmbH - Gärtnerstr

Inductive proximity switchIKL 010.32 GH

11.11.2008 Details are subject to change without notice. WG 210

Proxitron GmbH - Gärtnerstr. 10 - D-25335 Elmshorn - Tel. 04121/2621-0 - Fax. 04121/24404 - [email protected] I365E

Short circuit protected proximity switch for10–55 V DC with 3-wire technology.PNP – normally closed

The Sensor is suitable for higher ambienttemperature by the increased temperaturerange.

Technical Data

Type IKL 010.32 GH

Connection Art.-No. 2 m silicone cable (SIK) 2434I 5 m silicone cable (SIK) 2434I-5

10 m silicone cable (SIK) 2434I-10

20 m silicone cable (SIK) 2434I-20

Rated operating distance (Sn) 10 mm

Output PNP n. c.

Operating distance adjustable no

Target steel St37, 1 mm thick 30 x 30 mm

Location at metal flush

Supply voltage (UB) 10 - 55 V DC

Ripple voltage max. 15 %

Load current max. 0 - 400 mA

Short- time load current 0,8 A / 100 ms2 A / 10 ms

Short circuit protection yes, pulsing

No load current (I0) < 10 mA

Voltage drop (Ud) 1,5 V / 50 mA

Operating frequency (f) 200 Hz

Switching hysteresis (H) 1 - 15 %

Ambient temperature -20 ... +100 °C

Protection class IP 67

Function display LED

Housing material plastic PBT

Diagram of Connections

Page 8: Inductive proximity switch IKL 010.05 GH Series4.pdf · Inductive proximity switch IKL 015.31 GH 21.01.2002 Details are subject to change without notice. WG 210 Proxitron GmbH - Gärtnerstr

Inductive proximity switchIKL 010.31 GH

21.01.2002 Details are subject to change without notice. WG 210

Proxitron GmbH - Gärtnerstr. 10 - D-25335 Elmshorn - Tel. 04121/2621-0 - Fax. 04121/24404 - [email protected] I368E

Short circuit protected proximity switch for10�55 V DC with 3-wire technology.NPN � normally openThe Sensor is suitable for higher ambienttemperature by the increased temperaturerange.

Technical DataType IKL 010.31 GH

Connection Art.-No.2 m silicone cable (SIK) 2434G10 m silicone cable (SIK) 2434G-1020 m silicone cable (SIK) 2434G-20

Rated operating distance (Sn) 10 mmOutput NPN n. o.Operating distance adjustable noTarget steel St37, 1 mm thick 30 x 30 mmLocation at metal flushSupply voltage (UB) 10 - 55 V DCRipple voltage max. 15 %Load current max. 0 - 400 mAShort- time load current 0,8 A / 100 ms

2 A / 10 msShort circuit protection yes, pulsingNo load current (I0) < 10 mAVoltage drop (Ud) 1,5 V / 50 mAOperating frequency (f) 200 HzSwitching hysteresis (H) 1 - 15 %Ambient temperature -20 ... +100 °CProtection class IP 67Function display LEDHousing material plastic PBT

Diagram of Connections

Page 9: Inductive proximity switch IKL 010.05 GH Series4.pdf · Inductive proximity switch IKL 015.31 GH 21.01.2002 Details are subject to change without notice. WG 210 Proxitron GmbH - Gärtnerstr

Inductive proximity switchIKL 010.30 GH

21.01.2002 Details are subject to change without notice. WG 210

Proxitron GmbH - Gärtnerstr. 10 - D-25335 Elmshorn - Tel. 04121/2621-0 - Fax. 04121/24404 - [email protected] I370E

Short circuit protected proximity switch for10�55 V DC with 3-wire technology.NPN � normally closedThe Sensor is suitable for higher ambienttemperature by the increased temperaturerange.

Technical DataType IKL 010.30 GH

Connection Art.-No.2 m silicone cable (SIK) 2434K20 m silicone cable (SIK) 2434K-20

Rated operating distance (Sn) 10 mmOutput NPN n. c.Operating distance adjustable noTarget steel St37, 1 mm thick 30 x 30 mmLocation at metal flushSupply voltage (UB) 10 - 55 V DCRipple voltage max. 15 %Load current max. 0 - 400 mAShort- time load current 0,8 A / 100 ms

2 A / 10 msShort circuit protection yes, pulsingNo load current (I0) < 10 mAVoltage drop (Ud) 1,5 V / 50 mAOperating frequency (f) 200 HzSwitching hysteresis (H) 1 - 15 %Ambient temperature -20 ... +100 °CProtection class IP 67Function display LEDHousing material plastic PBT

Diagram of Connections

Page 10: Inductive proximity switch IKL 010.05 GH Series4.pdf · Inductive proximity switch IKL 015.31 GH 21.01.2002 Details are subject to change without notice. WG 210 Proxitron GmbH - Gärtnerstr

Inductive proximity switch

IKL 025.38 GHS4

09.09.13 nb Details are subject to change without notice. WG 210

Proxitron GmbH - Gärtnerstr. 10 - D-25335 Elmshorn - Tel. 04121/2621-0 - Fax. 04121/24404 - [email protected] I800E

Short circuit protected proximity switch for 10 – 55 V DC with 4-wire technology PNP – normally open + normally close

The sensor is suitable for higher ambient temperature by the increased temperature range.

Technical Data

Type IKL 025.38 GHS4

Art.-No. 2413E

Rated operating distance (Sn) 25 mm

Output PNP n.o. and n.c.

Operating distance adjustable no

Target steel St37, 1 mm thick 75 x 75 mm

Location at metal non flush

Supply voltage (UB) 10 - 55 V DC

Ripple voltage max. 15 %

Load current max. 0 - 400 mA

Short- time load current 0,8 A / 100 ms 2 A / 10 ms

Short circuit protection yes, pulsing

No load current (I0) < 10 mA

Voltage drop (Ud) < 2 V

Operating frequency (f) 200 Hz

Switching hysteresis (H) 1 - 15 %

Ambient temperature -25 ... +100 °C

Protection class IP 67

Connection plug S4 (M12x1)

Function display LED

Housing material plastic PBT Accessories (please order separately) Art.-No.

ST041/4-5H, suitable angular connector with 5 m connection cable up to 105 °C

9842M

Plug S4

Diagram of Connections

Page 11: Inductive proximity switch IKL 010.05 GH Series4.pdf · Inductive proximity switch IKL 015.31 GH 21.01.2002 Details are subject to change without notice. WG 210 Proxitron GmbH - Gärtnerstr

Inductive proximity switch

IKL 025.33 GHS4 A2

17.02.12 ul Details are subject to change without notice. WG 210

Proxitron GmbH - Gärtnerstr. 10 - D-25335 Elmshorn - Tel. 04121/2621-0 - Fax. 04121/24404 - [email protected] I727E

Short circuit protected proximity switch for higher sensing ranges 10 – 55 V DC with 3-wire technology.

PNP – normally open output

The sensor is suitable for higher ambient temperature by the increased temperature range.

Technical Data

Type IKL 015.33 GHS4 A2

Art.-No. 2413C

Rated operating distance (Sn) 25 mm

Output PNP NO

Operating distance adjustable no

Target steel St37, 1 mm thick 75 x 75 mm

Location at metal non flush

Supply voltage (UB) 10 - 55 V DC

Ripple voltage max. 10 %

Load current max. 0 - 200 mA

Short circuit protection yes, pulsing

No load current (I0) < 10 mA

Voltage drop (Ud) < 2,4 V

Operating frequency (f) 300 Hz

Switching hysteresis (H) 1 - 15 %

Ambient temperature -25 ... +100 °C

Protection class IP 69K*

Connection plug S4 (M12x1)

Function display Duo LED Supply / output

Housing material plastic PA Accessories (please order separately) Art.-No.

ST041/4-5H, suitable angular connector with 5 m connection cable up to 105 °C

9842M

*The protection class is complied with by using of an IP 69K connection cable.

Plug S4

Diagram of Connections

Page 12: Inductive proximity switch IKL 010.05 GH Series4.pdf · Inductive proximity switch IKL 015.31 GH 21.01.2002 Details are subject to change without notice. WG 210 Proxitron GmbH - Gärtnerstr

Inductive proximity switch

IKL 025.33 GH

05.09.12 nb Details are subject to change without notice. WG 210

Proxitron GmbH - Gärtnerstr. 10 - D-25335 Elmshorn - Tel. 04121/2621-0 - Fax. 04121/24404 - [email protected] I713E

Short circuit protected proximity switch for higher sensing ranges 10 – 55 V DC with 3-wire technology.

PNP – normally open

The Sensor is suitable for higher ambient temperature by the increased temperature range.

Technical Data

Type IKL 025.33 GH

Connection Art.-No. 2 m silicone cable (SIK) 2413B 5 m silicone cable (SIK) 2413B-5 10 m silicone cable (SIK) 2413B-10 15 m silicone cable (SIK) 2413B-15 20 m silicone cable (SIK) 2413B-20

Rated operating distance (Sn) 25 mm

Output PNP n. o.

Operating distance adjustable no

Target steel St37, 1 mm thick 75 x 75 mm

Location at metal non flush

Supply voltage (UB) 10 - 55 V DC

Ripple voltage max. 10 %

Load current max. 0 - 400 mA

Short circuit protection yes, pulsing

No load current (I0) < 10 mA

Voltage drop (Ud) < 2,5 V

Operating frequency (f) 200 Hz

Switching hysteresis (H) 1 - 15 %

Ambient temperature -25 up to +100 °C

Protection class IP 68/ IP 69K

Function display LED

Housing material plastic

Diagram of Connections

Page 13: Inductive proximity switch IKL 010.05 GH Series4.pdf · Inductive proximity switch IKL 015.31 GH 21.01.2002 Details are subject to change without notice. WG 210 Proxitron GmbH - Gärtnerstr

Fronllron$engoren fur Automation

Short circuit protected proximity switch withextended operation distance and M30 plastichousing with AC/DC 2-wire technology.

Inductive proximity switchrKL 020.05 G

Technical DataType

Connection2 m cable PVC

Rated operating distance (Sn)OutputOperating distance adjuslableTarget steel St37, 1 mm thickLocation at metalSupply voltage (Ua)Power frequencyLoad current max.Short- time load currentShort circuit protectionResidual current (lr)Voltage drop (Uo)Operating frequency (f)Switching hysteresis (H)Ambient temperatureProtection classFunction displayHousing material

lKL 020.05 G

Art.-No.:23788

20 mmnormally openno60x60mmnon flush20-250VACIDC50-60H25-300mA2Al20msyes<2mA<10v15 Hz< 20 o/o

-25 ... +70 "CtP 67LEDplastic

sn 20 rll1ll

WG 210

r673E

Diagram of Connections

L1

+

N

i - Effffid

LED

30.09.2010 Details are subiecl to change without notice.

Proxitron GmbH - Gartnerstr. 10 - D-25335 Elmshorn - Tel. 04121t2621-0 - Fax. 04121124404 - [email protected]

Page 14: Inductive proximity switch IKL 010.05 GH Series4.pdf · Inductive proximity switch IKL 015.31 GH 21.01.2002 Details are subject to change without notice. WG 210 Proxitron GmbH - Gärtnerstr

Inductive proximity switch

IKLT 014.38 GH

10.12.13 nb Details are subject to change without notice. WG 210

Proxitron GmbH - Gärtnerstr. 10 - D-25335 Elmshorn - Tel. 04121/2621-0 - Fax. 04121/24404 - [email protected] I810E

Short circuit protected proximity switch with M32 teflon housing and 4 wire connection PNP normally closed and normally open.

The Sensor is suitable for harsh ambient conditions by the increased temperature range and IP68 protection class.

Technical Data

Type IKLT 014.38 GH

Connection Art.-No. 2 m teflon cable (PTFE) 5 m teflon cable (PTFE)

2319Z

2319Z-5 10 m teflon cable (PTFE) 2319Z-10 15 m teflon cable (PFTE) 2319Z-15

Rated operating distance (Sn) 14 mm

Output PNP n. o.+ n. c.

Operating distance adjustable no

Target steel St37, 1 mm thick 42 x 42 mm

Location at metal non flush

Supply voltage (UB) 10 - 55 V DC

Ripple voltage < 15 %

Load current max. 0 - 200 mA

Short- time load current 0,8 A / 100 ms 2 A / 10 ms

Short circuit protection yes, pulsing

No load current (I0) < 10 mA

Voltage drop (Ud) < 2 V

Operating frequency (f) 200 Hz

Switching hysteresis (H) max. 15 %

Ambient temperature -20 ... +120 °C

Protection class IP 68

Function display LED inside

Housing material teflon PTFE

Diagram of Connections