induction process for new employee

21
Occupational Health & Safety Occupational Health & Safety Induction Induction Policies & Procedures Policies & Procedures

Upload: seamjami

Post on 20-May-2015

1.305 views

Category:

Self Improvement


9 download

TRANSCRIPT

Page 1: Induction process for new employee

Occupational Health & Safety Occupational Health & Safety InductionInduction

Policies & Procedures Policies & Procedures

Page 2: Induction process for new employee

This presentation is aimed at new and current employees for the purpose of maintaining a safe and healthy working environment.

Health and safety is everyone’s responsibility. It requires understanding, cooperation and participation.

You are legally obliged to abide by the OH&S regulations whilst in the workplace.

Page 3: Induction process for new employee

Overview

1. Current safety procedures2. Equipment safety checks 3. Health & safety representatives4. Identify potential hazards5. Controlling risks and incidents6. Reporting risks and incidents7. OH&S Inspection process and procedures8. Procedures for emergencies9. Employer and employee responsibilities10.Common hazard signs and safety symbols11.Resources

Page 4: Induction process for new employee

1 Current safety procedures

● Obey signs – safety signs are there for a reason. Comply with them at all times.

● Report incidents – if you spot a hazard and can not safely deal with it yourself, report it to your supervisor or relevant safety representative. Reporting hazards reduces the risk of accidents.

● Maintain workplace – a clean and tidy workplace reduces the risk of accidents. Clean spills, and remove hazardous obstructions straight away.

● Evacuation – fire drills are regularly practiced to ensure all staff are aware of fire exits and where to assemble in case of emergency.

● Workstations – all workstations contain ergonomic furniture with easy adjustment to suit the individual.

Page 5: Induction process for new employee

2 Equipment safety checks

● First aid kits – restocked every 3 months by St Johns Ambulance Service. Locations are marked with a green cross.

● Office equipment – checked annually and replaced if found to no longer be ergonomically sound.

● Required PPE (Personal Protective Equipment) – checked and replaced regularly.

Page 6: Induction process for new employee

3 Health and safety representatives

Your Health & Safety Representative isGavin Shaw 6259 5896Please be in contact if you have any inquiries, believe unsafe work practices are being carried out or potential hazards are of concern.

Page 7: Induction process for new employee

4 Identify potential hazards

1. Standing on chairs or unstable items.

2. Lifting and carrying excessively heavy items (+15kg).

3. RSI – extended periods of repeated muscular action and position.

4. Stress.

5. Dimly lit areas eg: Storerooms and walkways.

6. Flickering lights over workstations.

7. Carelessly placed cords or cables.

8. Hazardous substances not being stored correctly.

9. Lifting heavy objects over your head.

10.Noise.

Page 8: Induction process for new employee

5 Controlling risks and incidents

If you see a hazard and can make it safe without causing harm to yourself, do so. If you see a hazard and cannot remove it safely, contact your safety representative immediately and if necessary warn others around you of the danger.

1. Do not lift over your head to store or stack heavy items.

2. Do not stand on chairs or unstable items. Use appropriate step ladders.

3. Use a trolly or the help of another person to lift or carry heavy items.

4. Take regular breaks to avoid RSI related injuries.

5. Ensure all areas are well lit.

6. Ensure cords and cables are secured and positioned correctly. Not left in walkways.

7. Ensure hazardous substances are stored correctly in accordance with safety regulations.

8. Ensure protective equipment is worn when needed.

Page 9: Induction process for new employee

6 reporting risks and incidents

All risks or hazards that cannot be dealt with straight away should be reported to your safety representative as soon as possible.All injuries and incidents must be reported to your supervisor or safety representative within 24 hours and you will be required to fill out an incident report. This also includes incidents that could potentially result in injury, property damage or environmental harm. In cases of emergency call 000 without delay.

Page 10: Induction process for new employee

7 OH&S inspection process and procedures

OH&S meetings are conducted annually to ensure safety standards are practiced and maintained This includes inspections of areas to:● Check for hazards.● Reveal potential issues before they become

problems.● Show unsafe work practices.● Reveal equipment problems.

Page 11: Induction process for new employee

8 Procedures for emergencies

Steps to follow in case of an emergency situation – RACE

1. RESCUEIf you are involved in or close to a major incident and there is immediate danger to:● Yourself – move to safety, first, above all else.● Somebody else – if it does not pose a threat to yourself assist any

casualty. Assess conditions and administer appropriate first aid and/or inform First Aid Officers and emergency services.

Page 12: Induction process for new employee

8 Procedures for emergenciescontinued

2. ALARMIf you are involved in or close to a major incident contact emergency services on 000. report the :

● Exact location

● Type

● Extent

of the emergency. Also give your name and designation.

If possible, locate your safety representative and inform him of the incident.

If an immediate building evacuation is necessary such as a major fire, and the alarm has not triggered automatically, raise the alarm by activating the fire alarm console.

Located on the ground floor opposite the entrance. Break glass to activate.

Page 13: Induction process for new employee

8 Procedures for emergenciescontinued

3. ContainIf possible and safe to do so, secure the area. Switch of fume cupboards, close windows and leave the room closed if you are the last to leave. Do not stop to collect personal belongings.

4. Evacuate/ExtinguishAll occupants of the building must leave in an orderly manner by the nearest exit when hearing a continuous alarm and/or requested to evacuate the building by the Safety Representative. It should not be assumed that the alarm is being tested or has developed a fault.

Remember proceed quickly (do not run) to the nearest exit or as directed by the safety representative. Do not use the lift.

On exiting the building, proceed directly to the Evacuation Assembly Area located in the staff car park.

Page 14: Induction process for new employee

9 Employer and employee responsibilities

Management is responsible to:• Provide leadership and ensure that appropriate resources are available to meet the moral and statutory obligations as stated in this policy.• Take responsibility for Safety, Health and the Environment and maintain an OHS Structure which stipulates the hierarchies of responsibility.

Page 15: Induction process for new employee

9 Employer and employee responsibilities continued

Managers and Supervisors are responsible to:

• Provide a safe work environment for employees, visitors and contractors under their direct control.

• Ensure the company’s OHS Policy and procedures are observed at all times.

• Take action to correct unsafe and unhealthy conditions or behaviour in their areas of jurisdiction.

• Support consultative arrangements in accordance with the duty to consult.

• Ensure effective health and rehabilitation services are available.

Page 16: Induction process for new employee

9 Employer and employee responsibilities continued

• Ensure that injury, illness, hazardous exposures and near miss notifications are submitted and recorded promptly, the occurrence is investigated, and any necessary remedial action is taken.

• Encourage, consult and inform staff about health and safety issues.

• Ensure that personnel receive appropriate and adequate training to enable them to carry out their work safely and efficiently.

• Encourage staff to report matters that are inconsistent with OHS standards.

Page 17: Induction process for new employee

9 Employer and employee responsibilities continued

Employees are responsible to:

• Cooperate as far as is necessary to enable compliance with the OHS Policy and any requirement under the Act or the Regulation that is imposed in the interest of health, safety and welfare.

• Take reasonable care for their own safety and that of other persons at our workplace through appropriate behaviour, assistance and consideration,

• Use equipment in a safe manner, routinely maintain equipment and keep their work area tidy.

• Monitor the workplace to identify potential hazards and report the findings to their direct supervisor.

Page 18: Induction process for new employee

9 Employer and employee responsibilities continued

• Utilise appropriate personal protective equipment and clothing, and take notice of signage to prevent injury and accident.

• Be aware of the location of OHS related items such as first aid kits, material safety data sheets, fire fighting equipment and emergency exits.

• Be aware of key OHS personnel such as first aid officers, fire wardens and workplace OHS committee representatives.

Page 19: Induction process for new employee
Page 20: Induction process for new employee

10 Common hazard signs and safety symbols

Page 21: Induction process for new employee

11 Resources

● www.safeworkaustralia.gov.au● www.workplacestandards.tas.gov.au● www.worksafe.tas.gov.au● www.workplaceinfo.com.au