indotech industrial doors inc. the company our …

OUR MISSION

Determined to maintain very high-quality standards, our team innovates and develops products that are on the cutting edge of technology and that meet the performance and security requirements of today's industries.

THE COMPANY

A manufacturer of industrial doors since 1990, Indotech has the experience and knowledge to offer quality product engineering. Committed to maintaining our high standards, our team develops innovative products and technologies to meet the performance and security needs of today's businesses. Guaranteed from design to delivery Indotech's products are widely recognized in the industry. Indotech offers a guarantee of 25 years on the curtain and 2 years on mechanical and electrical equipment.

P.1

INDOTECH INDUSTRIAL DOORS INC.

ROLLING RUBBER DOOR TECH-ROLLTM SERIES

TECH-ROLL PROTM

Equipped with a spring system that allows up to 100 cycles a day, the TECH-ROLL PRO is designed for industries with doors measuring up to 400 square feet and low traffic flow. The worm gear reducer allows the door to open and

close at 12 to 18 inches/second.

TECH-ROLL ULTRATM

The high-performance TECH-ROLL ULTRA is equipped with a helical gear reducer which allows the door to be opened or closed at 19 to 60 inches/second. This model is the preferred choice for intensive use environments, such as underground parking garages and warehouses. The TECH-ROLL ULTRA is also available equipped with a low

maintenance inertia brake.

Indotech Industrial Doors inc.

259 d'Alençon Street Boucherville, QC J4B 0G9

T (450) 641-8222 [email protected]

A positive impact with LEED® Canada-NC & CS 2009

The growing interest for sustainable building design & operations, of which we are part, is embodied in the Leader-ship in Energy and Environmental Design (LEED®) Green Building Rating Systems in North America. This document explores the potential contribution for the use of TECH-ROLL ULTRATM & TECH-ROLL PROTM 8' X 8' and 14' X 14' doors from INDOTECH INDUSTRIAL DOORS INC. for a LEED® Canada-NC & CS 2009 (New Construction and Major Renovations) and (Core and Shell) project.

L

EE

D®

CA

NA

DA

-NC

& C

S 2

00

9

The CaGBC LEED® Canada-NC & CS 2009 Rating Systems include 110 points divided in seven categories for certifying the design and construction of commer-cial or institutional buildings and high-rise residential buildings of all sizes, both public and private.

Moreover, the components of TECH-ROLL ULTRATM & TECH-ROLL PROTM 8' X 8' and 14' X 14' doors from INDOTECH INDUSTRIAL DOORS INC. can help a project achieve a LEED® certification, however, the requirements relate to the overall design and materials in a project.

P.2

* It is important to consider that the total amount of possible points reflects the number of achievable points in each credit category. The product by itself

cannot achieve this score, as defined above, but is considered as a beneficial element in order to achieve LEEDcredits.

LEED® Canada-NC & CS 2009 Summary Table

Potential Contribution of the

TECH-ROLL ULTRATM & TECH-ROLL PROTM

8' X 8' et 14' X 14' doors

from INDOTECH INDUSTRIAL DOORS INC.

Category Prerequisite Credits Points Potential Contribution

LEED Canada-NC 2009 LEED Canada-CS 2009

SS Substainable Sites 1 8 26 0 points 0 points

WE Water Efficiency 1 3 10 0 points 0 points

EA Energy and Atmosphere 3 6 35 19 points 21 points

MR Materials and Resources 1 7 14 6 points 5 points

IEQ Indoor Environmental Quality 2 8 15 0 points 0 points

ID Innovation and Design 0 2 5 0 points 0 points

RP Regional Priority 0 2 4 3 points 3 points

Total 8 36 110 Up to 28 points Up to 29 points

INDOTECH INDUSTRIAL DOORS INC. has all required documents regarding LEED® and can rapidly provide information for a specific project.

Indirect 1 - 19 points (NC) 3 - 21 points (CS)

Optimize Energy Performance

EA 1 COMMENTS

CREDITS DURABLE

STRATEGIES POTENTIAL

POINTS CREDIT

RELEVANCE

CONTRIBUTION AND COMPLIANCE* TECH-ROLL ULTRATM & TECH-ROLL PROTM

SIZE 8' X 8' AND 14' X 14'

The TECH-ROLL ULTRATM & TECH-ROLL PROTM 8' X 8' and 14' X 14' doors from INDOTECH INDUSTRIAL DOORS INC. contribute to the Prerequisite EAp2, because their design allows them to open and close quickly. The opening and closing speed can be up to 18 inches per second for TECH-ROLL PROTM and up to 60 inches per second for TECH-ROLL ULTRATM . This limits heat loss and helps increase the energy performance of a building. The TECH-ROLL ULTRATM & TECH-ROLL PROTM 8' X 8' and 14' X 14' doors from INDOTECH INDUSTRIAL DOORS INC. include wind bars used as reinforcement, depending on weather conditions, which allow a tight seal thus helping reduce the building’s energy consump-tion.

Direct 0

(prerequisite) Minimum Energy

Performance EAp2 COMMENTS

POTENTIAL FOR LEED® CANADA-NC & CS 2009

EN

ER

GY A

ND

AT

MO

SP

HE

RE (

EA

)

CONTRIBUTION REQUIREMENTS

The TECH-ROLL ULTRATM & TECH-ROLL PROTM 8' X 8' and 14' X 14' doors from INDOTECH INDUSTRIAL DOORS INC. contribute to the Credit EA 1, because their design allows them to open and close quickly. The opening and closing speed can be up to 18 inches per second for TECH-ROLL PROTM and up to 60 inches per second for TECH-ROLL ULTRATM . This limits heat loss and helps increase the energy performance of a building. The TECH-ROLL ULTRATM & TECH-ROLL PROTM 8' X 8' and 14' X 14' doors from INDOTECH INDUSTRIAL DOORS INC. include wind bars used as reinforcement, depending on weather conditions, which allow a tight seal thus helping reduce the building’s energy consump-tion.

P.3

Requirements

Select 1 of the 3 compliance path options described below.

Chosen option must also be used for EA Credit 1.

Option 1 – Whole building simulation:

Either Model National Energy Code For Buildings (MNECB) or ASHRAE 90.1-2007, Energy Standard for Buildings Except Low-Rise Residential Buildings.

In comparison with the reference building performance rating, demonstrate a 23% cost improvement in the proposed building performance rating for new buildings or a 19% cost improvement in the proposed building performance rating for major renovations to existing buildings, for the MNECB or 10% cost improvement for new buildings or 5% cost improvement for major renovations to existing buildings for ASHRAE 90.1-2007.

Option 2 – Comply with the prescriptive measures of the ASHRAE Advanced Energy Design Guide appropriate to the project scope, for one of the following path: for Small Office Buildings 2004 or for Small Retail Buildings 2006 or for Small Warehouses and Self-Storage Buildings 2008 or for K-12 School Buildings.

Option 3 – Comply with the prescriptive measures identified in the Advanced BuildingsTM Core Performance Guide developed by the New Buildings Institute.

Requirements

Select 1 of the 3 compliance path options described below.

Comply with EA Prerequisite 2 (Minimum Energy Performance).

Option 1 – Demonstrate a percentage cost improvement in the proposed building performance rating compared with reference building performance rating, according to the chosen path in EA Prerequisite 2. Up to 19 points (NC) or 21 points (CS). MNECB

One point (1) LEED® NC and three (3) points LEED® CS for an expected cost reduc-tion of 25% (new buildings) or 21% (existing buildings renovations).

ASHRAE 90.1-2007

One point (1) LEED® NC and three (3) points LEED® CS for an expected cost reduction of 12% (new buildings) or 8% (existing building renovations).

Option 2 – Comply with the prescriptive measures of the ASHRAE Advanced Energy Design Guide (1 point) appropriate to the project scope, for one of the following path: for Small Office Buildings 2004 or for Small Retail Buildings 2006 or for Small Warehouses and Self-Storage Buildings 2008 or for K-12 School Buildings.

Option 3 – Comply with the prescriptive measures identified in the Advanced BuildingsTM Core Performance Guide developed by the New Buildings Institute. For this credit, addition-nal points must be obtained with this option (3 points maximum).

LEED® Technical Data validated by:

Record number Vertima: FVERT-13-1015-04

In effect since: September 2012

Last update: March 2013

* Vertima’s interpretation regarding potential contribution and compliance of the product and/or system for the LEED® credits are based on information given by the clients who are responsible for its veracity and integrity. Vertima is validating given proof and vouchers with manufacturers and their suppliers. Therefore, Vertima cannot be held responsible for false information or misinterpretation. VERTIMA INC. ensures an annual review of the technical data enclosed in this document in collaboration with its clients in order to maintain a high quality standard. www.vertima.ca


Indirect 1 - 2 points (NC)

1 point (CS) Materials Reuse MR 3 COMMENTS

Recycled Content 1 - 2 points Direct MR 4 COMMENTS

MA

TE

RIA

LS A

ND

RE

SO

UR

CE

S (

MR

)

The TECH-ROLL ULTRATM & TECH-ROLL PROTM 8' X 8' and 14' X 14' doors from INDOTECH INDUSTRIAL DOORS INC. can only contribute to this credit when they are retrieved and reused in another project or if used for other purposes in the same project. When the TECH-ROLL ULTRATM & TECH-ROLL PROTM 8' X 8' and 14' X 14' doors are new and installed in the project, they cannot contribute to this credit. The components’ durability and the high quality standard maintained by INDOTECH INDUSTRIAL DOORS INC. allow the recovery and reuse of the doors when necessary. Refer to the product’s the technical data sheets for the durability perform-ance details.

The TECH-ROLL ULTRATM & TECH-ROLL PROTM 8' X 8' and 14' X 14' doors from INDOTECH INDUSTRIAL DOORS INC. can contribute to this credit. The TECH-ROLL ULTRATM & TECH-ROLL PROTM 8' X 8' and 14' X 14' doors’ percentages of pre-consumer and post-consumer recycled content are shown in the tables below:

The recycled content percentages will vary according to the compo-nents selected. If specified in a LEED project, INDOTECH INDUSTRIAL DOORS INC. will make sure to optimize its products’ recycled content percentages. INDOTECH INDUSTRIAL DOORS INC. can provide recycled content data for its components, according to the specific suppliers selected in a LEED project.



P.4

TECH-ROLL ULTRATM

8' X 8' 14' X 14' Pre-consumer recycled content:

6.44% 4.17%

Post-consumer recycled content:

17.97% 18.72%

TECH-ROLL PROTM

8' X 8' 14' X 14' Pre-consumer recycled content:

7.67% 4.01%

Post-consumer recycled content:

21.42% 19.50%

Requirements

NC: Use salvaged, refurbished or reused materials, the sum of which constitutes at least 5% (1 point) or 10% (2 points) based on cost of the value of materials on the project.

CS: Use salvaged, refurbished or reused materials, the sum of which constitutes at least 5%

(1 point), based on cost of the value of materials on the project.

Requirements

Use materials with recycled content such that the sum of post-consumer recycled content plus 1/2 of the pre-consumer content constitutes at least 10% (1 point) or 20% (2 points) based on cost of the total value of the materials in the project. The recycled content value of a material assembly is determined by weight. The recycled fraction of the assembly is then multiplied by the cost of assembly to determine the recycled content value.

CREDITS DURABLE


POINTS CREDIT

RELEVANCE


SIZE 8' X 8' AND 14' X 14'









Regionals Materials COMMENTS Direct 1 - 2 points

M

AT

ER

IAL

S A

ND

RE

SO

UR

CE

S (

MR

)

The TECH-ROLL ULTRATM & TECH-ROLL PROTM 8' X 8' and 14' X 14' doors from INDOTECH INDUSTRIAL DOORS INC. contain some materials that are extracted, collected, treated and recovered within a 800 km or 2,400 km radius (depending on the transportation mean used). The percentages of compliant materials are show in the table below:

The percentage calculation was performed by considering the requirements of Credit MR 5 and the maximum distance radius (which depends on the means of transportation used). The origin of the main components and the mean of transportation used must be validated for every project. The TECH-ROLL ULTRATM & TECH-ROLL PROTM 8' X 8' and 14' X 14' doors’ final manufacturing site is located in Quebec, Boucherville (J4B 0G9).

TECH-ROLL ULTRATM

8' X 8' 14' X 14' % materials extracted, collected, treated and recovered within a 800 km or 2,400 km radius (depending on the transportation mean used).

14.44% 32.30%

TECH-ROLL PROTM

8' X 8' 14' X 14' % materials extracted, collected, treated and recovered within a 800 km or 2,400 km radius (depending on the transportation mean used).

5.59% 4.62%

MR 5

P.5

Requirements

Use building materials or products that have been extracted, harvested, recovered and processed within 800 km (500 miles) (2,400 km if shipped by rail or water) of the final manufacturing site.

Demonstrate that the final manufacturing site is within 800 km (500 miles) (2,400 km if shipped by rail or water) of the project site for these products. If only a fraction of a product or material is extracted, harvested, recovered, processed and manufactured locally, then only that percentage (by weight) must contribute to the regional value. The minimum percentage of regional materials for each point threshold is 20% (1 point) or 30% (2 points).

CREDITS DURABLE


POINTS CREDIT

RELEVANCE


SIZE 8' X 8' AND 14' X 14'







Regional Priority 1 - 3 points Direct / Indirect PR 2

R

EG

ION

AL P

RIO

RIT

Y (

RP

)

COMMENTS

TOTAL

UP TO 28 POSSIBLE POINTS (NC)

& 29 POSSIBLE POINTS (CS)

The TECH-ROLL ULTRATM & TECH-ROLL PROTM 8' X 8' and 14' X 14'

doors can contribute up to a total of twenty-eight (28) points for LEED® Canada-NC 2009 & twenty-nine (29) points for LEED® Canada-CS 2009

P

OIN

TS

Please refer to the «Advantages and Aspects to Consider» section of the Regional Priority credit. For a list of applicable credits, please refer to the CaGBC website www.cagbc.org, under the LEED® tools section for the LEED® NC 2009 for new construction and major renovations and LEED® CS 2009 for core and shell development Rating Systems.



P.6

* It is important to consider that the total amount of possible points reflects the number of achievable points in each credit category. The prod-

uct by itself cannot achieve this score, as defined above, but is considered as a beneficial element in order to achieve LEEDcredits.

Requirements

Up to 3 points for Regional Priority Credit 2 may be proposed for this credit that is intended to allow adding point emphasis to recognize one OR more issues that have additional regional envi-ronmental importance. To achieve a Regional Priority credit, the applicant must identify LEED credits which have addi-tional regional environmental importance. A project must achieve the base credit and then propose that credit as a Regional Priority credit.

www.vertima.ca

CREDITS DURABLE


POINTS CREDIT

RELEVANCE


SIZE 8' X 8' AND 14' X 14'





* Vertima’s interpretation regarding potential contribution and compliance of the product and/or system for the LEED® credits are based on information given by the clients who are responsible for its veracity and integrity. Vertima is validating given proof and vouchers with manufacturers and their suppliers. Therefore, Vertima cannot be held responsible for false information or misinterpretation. VERTIMA INC. ensures an annual review of the technical data enclosed in this document in collaboration with its clients in order to maintain a high quality standard.

indotech industrial doors inc. the company our …

Documents