individual spec s2gp15
TRANSCRIPT
![Page 1: Individual Spec S2Gp15](https://reader036.vdocuments.site/reader036/viewer/2022082908/5695cf5a1a28ab9b028db62e/html5/thumbnails/1.jpg)
7/23/2019 Individual Spec S2Gp15
http://slidepdf.com/reader/full/individual-spec-s2gp15 1/1
U04527 - Vehicle Suspension Design Specification -
Vehicle application
Mass (excluding driver, kg)
C of G Height (mm)
Front/Rear Suspension?Type
Wheel Travel (+/- mm)
Static Ride Height (mm)
Wheelbase Length (mm)
Rollcentre height (mm)
Drivers feet to front wheel centreline (you may move +/-50mm of this, +ve is in front, -ve behind)
Spring rate (N/mm)
Target Installation ratio
Wheel rate in Roll (N/mm)
Ackermann Geometry
Kingpin Inclination Angle (Degrees)
Tyres' maximum coefficient of frictionMethod of upright manufacture
For calculation purposes, you may assume that:
The inside wheels are completely unloaded during cornering
During heavy braking 75% of the vehicle's mass is carried by the front wheels
You will be provided with CAD models of:
Wheels
Pedalbox
Brake DiscBrake Calliper
Steering Rack
Steering Wheel
Set 2, Group 15
FS
230
280
FrontPullrod
25
45
1700
20
300
72
0.7
88
100%
3
1.4CNC