index 2014 volume 20textination.de/en/dfv/mi/mi-index 2014.pdf · melliand international 2014 index...
TRANSCRIPT
-
Melliand International 2014 1
Index 2014
Aakade, A.; Bagwan, A.S.; Koli, M.; Dalal, S.: Traveler weights: effective measures to control yarn quality andyarn breakage rate.............................213
Aibibu, D.; Cherif, C.; Hund, D.; Ripperger, S.; Kuhr, M.: Finishing of barrier textiles with functionalized microparticles by partial and specific application.........................................175
Aibibu, D.; Cherif, C.; Schröter, A.; Gerlach, G.; Wendler, J.; Tonndorf, R.;Nocke, A.: Textile-technological manufacturing of braided multilayer sensors for monitoring of wounds .....231
Baddhan, A.; Tyagi, G.K.: Elastic recovery properties ofelastane/viscose MJS core yarns .........146
Bagwan, A.S.: Impact of spinning technologies on cotton yarn properties ............................................79
- Harshal, P.; Patil, V.: Impact of blow room beater speed on yarn properties ..........................................152
- Koli, M.; Dalal, S.; Aakade, A.: Traveler weights: effective measures to control yarn quality and yarn breakage rate ....................................213
Bauer, J.; Sellin, M.; Brückner, P.; Meister, F.; Krieg, M.: Cellulose fiberscontaining vegetable oils and lipophilicvitamins for new applications ..............74
Beauduin, C.: ITMA Asia + CITME key to cost-effective automation and green solutions ....................................57
Behera, J.; Sengupta, A.: Spider silk: ancient biomaterial for functional textiles ..............................................201
Beier, O.; Spange, S.; Schimanski, A.;Ramm, M.; Pfuch, A.: Tailor-made surfaces by means of inline plasmacoating at atmospheric pressure ........177
Bhosale, N.; Pareek, V.; Eklahare, S.: Printing on wool: the secret is in preparation and pretreatment..............93
Bidu, J.; Mahltig, B.; Haase, H.; Grethe, T.: Antimicrobial finishing of textiles by modified clay minerals.......173
Biermann, I.: Com4 yarn in practice .....25Boucly, O.: New lab twisting and
cabling machine ..................................34Breugelmans, T.: Adhesion
improvements with water-based systems ...............................................48
Brückner, P.; Meister, F.; Krieg, M.; Bauer, J.; Sellin, M.: Cellulose fibers containing vegetable oils and lipophilicvitamins for new applications ..............74
Chatterjee, A.; Maity, S.; Mohapatra,H.S.: New generation natural fiber –akund floss ..........................................22
Chavan, H.V.; Patil, S.S.: Yarn performance with cold sizing .......84
Cherif, C.; Hund, D.; Ripperger, S.; Kuhr, M.; Aibibu, D.: Finishing of barrier textiles with functionalized microparticles by partial and specific application.........................................175
- Schröter, A.; Gerlach, G.; Wendler, J.;Tonndorf, R.; Nocke, A.; Aibibu, D.: Textile-technological manufacturing of braided multilayer sensors for monitoring of wounds.......................231
Comandar, C.: New structural elementsbased on stitch transfer .......................87
Dalal, S.; Aakade, A.; Bagwan, A.S.; Koli, M.: Traveler weights: effective measures to control yarn quality andyarn breakage rate.............................213
Dandgole, P.B.; Dudagi, I.B.; Prasad, J.;Surwase, V.S.; Yuvraj, T.; Deori, R.; Gotipamul, R.L.: Effect of cover factorand weave factor on flammability char -acteristics of 100 % cotton fabric ........35
Darji, A.: Lyocell denim garment washes ............44
- Shinde, R.: Impact of urea in ink-jet printing of 100 % viscose woven fabric.................................................168
Deori, R.; Gotipamul, R.L.; Dandgole, P.B.; Dudagi, I.B.; Prasad, J.;Surwase, V.S.; Yuvraj, T.: Effect of cover factor and weave factor on flammability characteristics of 100 % cotton fabric ........................35
Dolmans, R.; Steinmann, W.; Seide, G.;Gries, T.; Jandrey, S.: Influence of heatsetting on color fastness of polyamidetextile floorcoverings .........................224
Dorugade, V.; Ghongade, V.D.: Influence of 3 licker-in card on yarn quality .......................................154
Dorugade, V.A.: Effect of magnetizedwater on dyeing of cotton ...................90
- Mali, N.; Parsi, R.D.: Impact of feed roller, beater and grid bar gauge setting in flexi clean on yarn quality...211
Dudagi, I.B.; Prasad, J.; Surwase, V.S.;Yuvraj, T.; Deori, R.; Gotipamul, R.L.;Dandgole, P.B.: Effect of cover factor and weave factor on flammability char acteristics of 100 % cotton fabric...................................................35
Eklahare, S.; Bhosale, N.; Pareek, V.: Printing on wool: the secret is in preparation and pretreatment..............93
Feigl, J.: Perfect and clean coiling......................78
Fontana, B.: New monofilaments for a sustainable technical textile market...............................................148
Fortunato, G.; Rossi, R.M.; Guex, A.G.: Fibers for muscle tissue regeneration......................................150
Fraas, R.: New generation of rovingframes for high-quality rovings ............77
Gazzah, M.; Jaouachi, B.; Sakli, F.: Modeling residual bagging behavior of denim fabrics as function of frictionparameters ..........................................95
Gerlach, G.; Wendler, J.; Tonndorf, R.;Nocke, A.; Aibibu, D.; Cherif, C.; Schröter, A.: Textile-technological manufacturing of braided multilayer sensors for monitoring of wounds .....231
Germann, J.C.: New air-jet technology for the label market ...........................219
Ghongade, V.D.; Dorugade, V.: Influence of 3 licker-in card on yarn quality .......................................154
Gloy, Y.-S.: Industry 4.0 – the future ofthe textile production?...........................1
Deutscher Fachverlag GmbHMainzer Landstr. 25160326 Frankfurt/GermanyTel.: +49-69/75 95-13 93Fax: +49-69/75 95-12 90E-mail: [email protected]
Index 2014 Volume 20
Author Index Page Page Page
www.melliand.com
-
- Seide, G.; Gries, T.; Rübsam, U.; Schröter, A.: Ecodesign methodology for recyclable textile coverings used inthe construction and transport industry226
Gnägi, P.: European textile machinery industry, still leading?.........................129
Gotipamul, R.L.; Dandgole, P.B.; Dudagi, I.B.; Prasad, J.; Surwase, V.S.;Yuvraj, T.; Deori, R.: Effect of cover factor and weave factor on flammability characteristics of 100 % cotton fabric ............................35
Grethe, T.; Bidu, J.; Mahltig, B.; Haase, H.: Antimicrobial finishing of textiles by modified clay minerals.......173
Gries, T.; Jandrey, S.; Dolmans, R.; Steinmann, W.; Seide, G.: Influence ofheat setting on color fastness of polyamide textile floorcoverings ........224
- Rübsam, U.; Schröter, A.; Gloy, Y.-S.; Seide, G.: Ecodesign methodology for recyclable textile coverings used in theconstruction and transport industry ...226
Guex, A.G.; Fortunato, G.; Rossi, R.M.: Fibers for muscle tissue regeneration......................................150
Gujar, J.: Fast startup of rotor spinning machine with best piecing quality......158
Gutmann, J.S.; Textor, T.: Ionic liquids for finishing polyester fibers with cellulosic surfaces ..............................203
Haase, H.; Grethe, T.; Bidu, J.; Mahltig, B.:Antimicrobial finishing of textiles by modified clay minerals...................173
Halbe, A.V.: Polyurethane reactive hotmelts – sustainable alternative to flame lamination..................................51
Harshal, P.; Patil, V.; Bagwan, A.S.: Impact of blow room beater speed on yarn properties .............................152
Hasler, F.: Metallic card clothing with positive influence.........................81
Hayes, E.: World textile business 2013...............199
Hének, V.: Low energy noise absorbingspindle...............................................164
Hulle, A.; Patil, T.; Patil, A.: Effect of air pressure on air-covered yarn .........216
- Kadole, P.: Effect of punch density onproperties of polypropylene needle punched nonwovens .........................229
Hund, D.; Ripperger, S.; Kuhr, M.; Aibibu, D.; Cherif, C.: Finishing of barrier textiles with functionalized microparticles by partial and specific application ............................175
Jandrey, S.; Dolmans, R.; Steinmann, W.;Seide, G.; Gries, T.: Influence of heat setting on color fastness of polyamide textile floorcoverings ........224
Jaouachi, B.; Sakli, F.; Gazzah, M.: Modeling residual bagging behavior of denim fabrics as function of frictionparameters ..........................................95
Jianyong Yu; Xiaohong Qin; Rong Zhou:Comfort properties of modified polyester/cotton knitted fabrics ...........38
Kadole, P.; Hulle, A.: Effect of punch density on properties of polypropyleneneedle punched nonwovens ..............229
Kiechl, W.: Concept for fighting white PP in cotton .............................180
Koli, M.; Dalal, S.; Aakade, A.; Bagwan,A.S.: Traveler weights: effective measures to control yarn quality andyarn breakage rate.............................213
Krieg, M.; Bauer, J.; Sellin, M.; Brückner, P.; Meister, F.: Cellulose fiberscontaining vegetable oils and lipophilicvitamins for new applications ..............74
Kuhr, M.; Aibibu, D.; Cherif, C.; Hund, D.;Ripperger, S.: Finishing of barrier textileswith functionalized microparticles by partial and specific application...........175
Mafalda, A.; Weiß, H.-J.; Weiser, M.; Möhring, U.; Zimmermann, Y.; Pohlers,S.: Continuous dyeing methods for high quality PAN velours ......................42
Mahltig, B.; Haase, H.; Grethe, T.; Bidu, J.: Antimicrobial finishing of textiles by modified clay minerals.......173
Maity, S.; Mohapatra, H.S.; Chatterjee, A.: New generation natural fiber – akund floss ...................22
Mali, N.; Parsi, R.D.; Dorugade, V.A.: Impact of feed roller, beater and grid bar gauge setting in flexi clean on yarn quality ..................................211
Marsal, F.: Application of microcapsules in spinning ....................31
Meister, F.; Krieg, M.; Bauer, J.; Sellin, M.; Brückner, P.: Cellulose fiberscontaining vegetable oils and lipophilicvitamins for new applications ..............74
Mohapatra, H.S.; Chatterjee, A.; Maity, S.: New generation natural fiber – akund floss ...................22
Möhring, U.; Pohlers, S.; Mafalda, A.;Weiß, H.-J.; Zimmermann, Y.; Weiser, M.:Continuous dyeing methods for highquality PAN velours..............................42
More, V.; Patil, N.: New compact spinning machine for high-quality end products .....................................215
Müller, J.: New draw frames with additional innovations .......................210
Narkhedkar, R.N.: Influence of twist direction on tensile properties of double yarns........................................28
Nocke, A.; Aibibu, D.; Cherif, C.; Schröter, A.; Gerlach, G.; Wendler, J.;Tonndorf, R.: Textile-technological manufacturing of braided multilayer sensors for monitoring of wounds .....231
Paccanelli, A.: European textile finishing industry needs urgent political action ...................................185
Pareek, V.; Eklahare, S.; Bhosale, N.: Printing on wool: the secret is in preparation and pretreatment..............93
Parsi, R.D.; Dorugade, V.A.; Mali, N.: Impact of feed roller, beater and grid bar gauge setting in flexi clean on yarn quality ..................................211
Patil, A.; Hulle, A.; Patil, T.: Effect of air pressure on air-covered yarn .........216
Patil, N.; More, V.: New compact spinning machine for high-quality end products .....................................215
Patil, S.S.; Chavan, H.V.: Yarn performance with cold sizing .......84
Patil, T.; Patil, A.; Hulle, A.: Effect of air pressure on air-covered yarn .........216
Patil, V.; Bagwan, A.S.; Harshal, P.: Impact of blow room beater speed on yarn properties .............................152
Pfuch, A.; Beier, O.; Spange, S.; Schimanski, A.; Ramm, M.: Tailor-madesurfaces by means of inline plasmacoating at atmospheric pressure ........177
Pohlers, S.; Mafalda, A.; Weiß, H.-J.; Weiser, M.; Möhring, U.; Zimmermann,Y.: Continuous dyeing methods for high quality PAN velours ......................42
2 Melliand International 2014
Index 2014
Author Index Page Page Page
Issue 1 Pages 1 – 56
Issue 2 Pages 57 – 128
Issue 3 Pages 129 – 184
Issue 4 Pages 185 – 232
Volume 20
2014
-
Melliand International 2014 3
Index 2014
Author Index Page Page Page Pradhan, C.; Teli, M.D.; Sheikh, J.:
Simultaneous natural dyeing and antibacterial finishing using chitosanfrom bio-waste ..................................171
Prasad, J.; Surwase, V.S.; Yuvraj, T.; Deori, R.; Gotipamul, R.L.; Dandgole,P.B.; Dudagi, I.B.: Effect of cover factor and weave factor on flammability characteristics of 100 % cotton fabric ............................35
Raghav, R.; Tuteja, R.: Studies on the environmental impact of colored fabrics: dope dyed versus piece dyed viscose fabrics....................................181
Ramm, M.; Pfuch, A.; Beier, O.; Spange,S.; Schimanski, A.: Tailor-made surfaces by means of inline plasma coating at atmospheric pressure.........................177
Ripperger, S.; Kuhr, M.; Aibibu, D.; Cherif, C.; Hund, D.: Finishing of barrier textiles with functionalized microparticles by partial and specific application ............................175
Rong Zhou; Jianyong Yu; Xiaohong Qin:Comfort properties of modified polyester/cotton knitted fabrics ...........38
Rossi, R.M.; Guex, A.G.; Fortunato, G.: Fibers for muscle tissue regeneration......................................150
Rübsam, U.; Schröter, A.; Gloy, Y.-S.; Seide, G.; Gries, T.: Ecodesign methodology for recyclable textile coverings used in the construction and transport industry .......................226
Rußler, A.: Use of hardwood pulp for production of high-tenacity viscose fibers.................................................207
Sakli, F.; Gazzah, M.; Jaouachi, B.: Modeling residual bagging behavior of denim fabrics as function of friction parameters ..............................95
Schimanski, A.; Ramm, M.; Pfuch, A.; Beier, O.; Spange, S.: Tailor-made surfaces by means of inline plasmacoating at atmospheric pressure ........177
Schnell, M.: Air-jet spinning machine with 200 spinning units .....................161
Schröter, A.; Gloy, Y.-S.; Seide, G.; Gries, T.; Rübsam, U.: Ecodesign methodology for recyclable textile coverings used in the construction and transport industry .......................226
- Gerlach, G.; Wendler, J.; Tonndorf, R.;Nocke, A.; Aibibu, D.; Cherif, C.: Textile-technological manufacturing of braided multilayer sensors for monitoring of wounds.......................231
Seide, G.; Gries, T.; Jandrey, S.; Dolmans,R.; Steinmann, W.: Influence of heat setting on color fastness of polyamidetextile floorcoverings .........................224
- Gries, T.; Rübsam, U.; Schröter, A.; Gloy, Y.-S.: Ecodesign methodology forrecyclable textile coverings used in theconstruction and transport industry ...226
Sellin, M.; Brückner, P.; Meister, F.; Krieg,M.; Bauer, J.: Cellulose fibers containingvegetable oils and lipophilic vitamins for new applications ............................74
Sengupta, A.; Behera, J.: Spider silk: ancient biomaterial forfunctional textiles ..............................201
Sheikh, J.; Pradhan, C.; Teli, M.D.: Simultaneous natural dyeing and antibacterial finishing using chitosanfrom bio-waste ..................................171
Shinde, R.; Darji, A.: Impact of urea in ink-jet printing of 100 % viscose woven fabric .....................................168
Spange, S.; Schimanski, A.; Ramm, M.;Pfuch, A.; Beier, O.: Tailor-made surfaces by means of inline plasmacoating at atmospheric pressure ........177
Steinmann, W.; Seide, G.; Gries, T.; Jandrey, S.; Dolmans, R.: Influence of heat setting on color fastness of polyamide textile floorcoverings ........224
Surwase, V.S.; Yuvraj, T.; Deori, R.; Gotipamul, R.L.; Dandgole, P.B.; Dudagi, I.B.; Prasad, J.: Effect of cover factor and weave factor on flammability characteristics of 100 %cotton fabric........................................35
Teli, M.D.; Sheikh, J.; Pradhan, C.:
Simultaneous natural dyeing and antibacterial finishing using chitosanfrom bio-waste ..................................171
Textor, T.; Gutmann, J.S.: Ionic liquids for finishing polyester fibers with cellulosic surfaces ..............................203
Tonndorf, R.; Nocke, A.; Aibibu, D.; Cherif, C.; Schröter, A.; Gerlach, G.;Wendler, J.: Textile-technological manufacturing of braided multilayer sensors for monitoring of wounds .....231
Tuteja, R.; Raghav, R.: Studies on the environmental impact of colored fabrics: dope dyed versus piece dyed viscose fabrics....................................181
Tyagi, G.K.; Baddhan, A.: Elastic recovery properties ofelastane/viscose MJS core yarns .........146
Wang, C.: Simulating and characterizingairflow inside fiber condensing zone on pneumatic compact spinning machine ............................................159
Weiser, M.; Möhring, U.; Zimmermann,Y.; Pohlers, S.; Mafalda, A.; Weiß, H.-J.: Continuous dyeing methods for highquality PAN velours..............................42
Weiß, H.-J.; Weiser, M.; Möhring, U.; Zimmermann, Y.; Pohlers, S.; Mafalda, A.:Continuous dyeing methods for highquality PAN velours..............................42
Wendler, J.; Tonndorf, R.; Nocke, A.; Aibibu, D.; Cherif, C.; Schröter, A.; Gerlach, G.: Textile-technological manufacturing of braided multilayer sensors for monitoring of wounds .....231
Xiaohong Qin; Rong Zhou; Jianyong Yu:Comfort properties of modified polyester/cotton knitted fabrics ...........38
Yuvraj, T.; Deori, R.; Gotipamul, R.L.; Dandgole, P.B.; Dudagi, I.B.; Prasad, J.;Surwase, V.S.: Effect of cover factor and weave factor on flammability characteristics of 100 % cotton fabric..35
Zimmermann, Y.; Pohlers, S.; Mafalda, A.;Weiß, H.-J.; Weiser, M.; Möhring, U.:Continuous dyeing methods for highquality PAN velours..............................42
Subject Index Page Page Page Fibers/YarnsAkund floss – new generation
natural fiber ........................................22Brief information......................5, 6, 58-60,
.......................................134, 187, 188Cellulose fibers containing vegetable
oils and lipophilic vitamins for new applications .........................................74
Company information ....5, 6, 58, 134, 187
Elastic recovery properties of elastane/viscose MJS core yarns .........146
EU-28: turnover in man-made fiber industry 2013 ....................................147
Fibers for muscle tissue regeneration......................................150
Global fiber production........................132Ionic liquids for finishing polyester
fibers with cellulosic surfaces.............203
New monofilaments for a sustainabletechnical textile market .....................148
Spider silk: ancient biomaterial for functional textiles ..............................201
Use of hardwood pulp for production of high-tenacity viscose fibers............207
World apparel fiber consumption.............4World market trends for false-twist
draw-texturing machines ...................200
-
4 Melliand International 2014
Index 2014
SpinningAir-jet spinning machine with 200
spinning units ....................................161Application of microcapsules in
spinning ..............................................31Com4 yarn in practice ............................25Draw frames with additional
innovations........................................210Effect of air pressure on air-covered
yarn...................................................216Fast startup of rotor spinning machine
with best piecing quality....................158Fiber test instrument to optimize cotton
yarn processes .....................................27Impact of blow room beater speed
on yarn properties .............................152Impact of feed roller, beater and
grid bar gauge setting in flexi clean on yarn quality ..................................211
Impact of spinning technologies on cotton yarn properties ....................79
Individual automation in package winding ...............................162
Influence of 3 licker-in card on yarn quality .......................................154
Influence of twist direction on tensile properties of double yarns ...................28
Innovation update for compact spinning technology ..........................157
ITMA Asia + CITME: preview ...........98, 99, 108, 109, 111, 115, 116,
118-120, 122, 126Lab twisting and cabling machine ..........34Low energy noise absorbing spindle.....164Metallic card clothing with positive
influence .............................................81New compact spinning machine for
high-quality end products ..................215Perfect and clean coiling ........................78Roving frames for high-quality rovings ...77Short-staple spinning shipments
2013 .................................................209Simulating and characterizing airflow
inside fiber condensing zone on pneumatic compact spinning machine ............................................159
Traveller weights: effective measures to control yarn quality and yarn breakage rate ....................................213
WeavingEffect of cover factor and weave factor
on flammability characteristics of 100 % cotton fabric ............................35
ITMA Asia + CITME: preview ...........98, 99, 104, 106, 108, 109, 120, 124
New air-jet portfolio ............................165New air-jet technology for the label
market...............................................219Slight recovery for shuttle-less weaving
machines ...........................................218
Weaving with stainless steel or bronze –light and exclusive designs with metal.................................................221
Yarn performance with cold sizing .........84Yarn tensioner for fine glass filament
yarns ...................................................34
KnittingCircular and flat knitting machinery
shipments 2013.................................222Comfort properties of modified
polyester/cotton knitted fabrics ...........38ITMA Asia + CITME: preview .........98, 104,
108, 116, 121New multiaxial machine ........................86New structural elements based on
stitch transfer ......................................87
Finishing3D print finished textile product.............47Adhesion improvements with
water-based systems ...........................48Antimicrobial finishing of textiles
by modified clay minerals...................173Continuous dyeing methods for
high quality PAN velours ......................42Eco-friendly dyeing technology with
indigo and sulfur dyes .......................166Effect of magnetized water on dyeing
of cotton .............................................90European textile finishing industry
needs urgent political action..............185Finishing of barrier textiles with
functionalized microparticles by partial and specific application...........175
FR treatment on synthetic-cotton fabrics .................................................14
Impact of urea in ink jet printing of 100% viscose woven fabric ...............168
Inkjet printing in the textile printing industry ...............................................46
ITMA Asia + CITME: preview ..........98-111, 114, 121, 123, 126
Lyocell denim garment washes...............44New blue shades for denim..................176New generation of machine control .......47New yarn dyeing machine....................170Polyurethane reactive hot melts – sustain-
able alternative to flame lamination.....51Printing on wool: the secret is in
preparation and pretreatment..............93Self-cleaning textile technology..............14Simultaneous natural dyeing and
antibacterial finishing using chitosanfrom bio-waste ..................................171
Studies on the environmental impact of colored fabrics: dope dyed versus piece dyed viscose fabrics ..................181
Tailor-made surfaces by means of inlineplasma coating at atmospheric pressure.............................................177
Wastewater recycling for textile dyeing industry – China bets on Made in Germany ...........................................167
NonwovensAdvanced fiber control on nonwovens
cards ...................................................53Brief information............................7, 8, 96Company information ............................96Effect of punch density on properties of
polypropylene needlepunched nonwovens........................................229
ITMA Asia + CITME: preview ...........97, 98, 103, 122
ResearchAkund floss – new generation
natural fiber ........................................22Antimicrobial finishing of textiles
by modified clay minerals...................173Application of microcapsules in
spinning ..............................................31Cellulose fibers containing vegetable
oils and lipophilic vitamins for new applications .................................74
Comfort properties of modifiedpolyester/cotton knitted fabrics ...........38
Continuous dyeing methods for high quality PAN velours ......................42
Ecodesign methodology for recyclable textile coverings used in the construction and transport industry .............................................226
Effect of air pressure on air-covered yarn...................................................216
Effect of cover factor and weave factor on flammability characteristics of 100 % cotton fabric ............................35
Effect of magnetized water on dyeing of cotton .............................................90
Effect of punch density on properties of polypropylene needlepunched nonwovens........................................229
Elastic recovery properties of elastane/viscose MJS core yarns .........146
Finishing of barrier textiles with functionalized microparticles by partial and specific application...........175
Graphene membranes as ultimate filter ..................................................228
Impact of blow room beater speed on yarn properties .............................152
Impact of feed roller, beater and grid bar gauge setting in flexi clean on yarn quality ..................................211
Impact of spinning technologies on cotton yarn properties ....................79
Impact of urea in ink jet printing of 100% viscose woven fabric ...............168
Influence of 3 licker-in card on yarn quality ...............................................154
Subject Index Page Page Page
-
Melliand International 2014 5
Index 2014
Subject Index Page Page Page Influence of heat setting on color
fastness of polyamide textile floorcoverings....................................224
Influence of twist direction on tensile properties of double yarns ...................28
Ionic liquids for finishing polyester fiberswith cellulosic surfaces ......................203
Modeling residual bagging behavior of denim fabrics as function of friction parameters ..........................................95
New structural elements based on stitch transfer ......................................87
Polyurethane reactive hot melts – sustainable alternative to flame lamination ...........................................51
Printing on wool: the secret is in preparation and pretreatment..............93
Simulating and characterizing airflow inside fiber condensing zone on pneumatic compact spinning machine ............................................159
Simultaneous natural dyeing and antibacterial finishing using chitosanfrom bio-waste ..................................171
Spider silk: ancient biomaterial for functional textiles ..............................201
Studies on the environmental impact ofcolored fabrics: dope dyed versus piece dyed viscose fabrics ..................181
Tailor-made surfaces by means of inline plasma coating at atmosphericpressure.............................................177
Textile-technological manufacturing ofbraided multilayer sensors for monitoring of wounds.......................231
Traveller weights: effective measures to control yarn quality and yarn breakage rate ....................................213
Yarn performance with cold sizing .........84
Textile IndustryAdvanced fiber control on nonwovens
cards ...................................................53Brief information....................5-21, 41, 43,
60-71, 133-145, 156, 158, 172, 187-198
Circular and flat knitting machinery shipments 2013.................................222
Company information.......5-21, 43, 60-71, 133-145, 187-198
Concept for fighting white PP in cotton ...............................................180
Ecodesign methodology for recyclable textile coverings used in the construction and transport industry .............................................226
Effect of punch density on properties of polypropylene needle punched nonwovens........................................229
Environmental impact measuring software ............................................183
EU-28: turnover in man-made fiber industry 2013 ....................................147
European textile finishing industry needs urgent political action..............185
European textile machinery industry, still leading? ......................................129
Factor+ concept expresses innovativepower for Swiss textile machinery sector ..................................................72
Graphene membranes as ultimate filter ..................................................228
Improved heat setting performance .....223Industry 4.0 – the future of the
textile production?.................................1Influence of heat setting on color
fastness of polyamide textile floorcoverings....................................224
Innovative dosing system .....................223ITMA Asia + CITME key to cost-effective
automation and green solutions ..........57ITMA Asia + CITME: preview ...........97-127Management ................10, 12, 14, 16, 62,
64, 66, 68, 136, 138, 140, 190, 192, 194, 196
Modeling residual bagging behavior of denim fabrics as function of friction parameters ..............................95
New publications ...........................30, 138Pneumatic cord and yarn grips .............223Robots and silkworms create silk
pavilion ...............................................50Short-staple spinning shipments
2013 .................................................209Slight recovery for shuttle-less
weaving machines .............................218Studies on the environmental impact
of colored fabrics: dope dyed versus piece dyed viscose fabrics ..................181
Textile-technological manufacturing ofbraided multilayer sensors for monitoring of wounds.......................231
World market trends for false-twist draw-texturing machines ...................200
World textile business 2013.................199
adidas 1, 68, 142Aditya Birla Group 44Advansa 190AESA Air Engineering 97Aglika 140Akarca Mensucat 69Aksa Akrilik 133Alexium International 12, 14, 142Alperteks Mensucat 197Alpha Retail Group 8American & Efird 66Americhem 16AMSilk 201Andritz Nonwoven 97Anker-Teppichboden Gebr. Schoeller 226Aquafil 226Arahne 19Archroma 12, 14, 68, 142, 194Asahi Kasei Fibers 134Atlas MTT 225Aunde 192Autefa Solutions 98Bamberger Kaliko 12
BASF 141, 194, 195, 196Bayer 133Bayer MaterialScience 68, 142, 196Bekaert 53Benecke-Kaliko 193Benetton 8Benniger 72, 98Beyteks Tekstil 69Binsfeld Engineering 99Biotti Card Clothing 98Birla Cellulose 44, 168, 181bluesign technologies 8BMSvision 98Bonas Textile Machinery 99Bräcker 116Brückner Trockentechnik 71, 99,
140, 144, 145Brugman Holland 100Hermann Bühler 198Cavitec 123China Hi-Tech Group 14, 20Chomarat Textiles Industries 193CHT R. Beitlich 142
Clariant 16, 68, 194Coats 139Cobble 126ContiTech 193Cytec Industries 133Daewoo International 140Daimo 120Desso 10DiloGroup 103DiloSpinnbau 103DiloTemafa 103Dolan 133Dollfus & Muller 104Dong-A T.O.L. 197Dow Chemical 67Dralon 133, 190DSM 141DuPont 16, 133DuPont Protection Technologies 60Durst Phototechnik 18DyStar 16, 69, 141,
176, 197, 225Ekart Tekstil 71
Company Index Page Page Page
-
6 Melliand International 2014
Index 2014
Electro-Jet 31Elif Iplik Tekstil 69Erhardt+Leimer 108Esquel 72Essex Flameproofing 14Far Eastern New Century 18Fehrer Automotive 192Fiber Glass Industries 193Fil Control 99Fisipe 133Flash 10Flawa 66Fleissner 136Fong’s Industries 14, 20, 64, 70,
102, 144, 145, 197Fong’s National Engineering 145Formax 70fortiss 1Freudenberg 136, 140Gavazzi 112Gemini Business Solutions 1Gerber Technology 71, 198Glanzstoff Industries 136, 207Goller 102Graf + Cie. 81, 116Grasim Industries 44, 168, 181Willy Grob 106Groz-Beckert 104, 198, 221Gruschwitz 5GSD 139Gualchierani Baling Systems 107Gul Ahmed Textile Mills 71Gütermann 66Hänsel Textil 140Has Sentetik Cuval 220Haver & Boecker 221HeiQ Materials 16Hergeth 10August Herzog 107Himson 200Hoftex 66Huntsman Textile Effects 43, 194, 195Hunziker 108ICAP SIRA Chemicals and Polymers 68Indorama 10Instron 223Interface Europe 226Invista 5, 62Iro 109Isotex Engineering 123Itema 20, 66, 106, 138, 143, 165, 197Jagenberg Textile 143Jakob Müller 72, 219James H. Heal 18, 69, 156, 197Jeanologia 21, 183Johnson Controls 1Jossi Systems 18, 180Jowat 64Karl Mayer 19, 34, 70, 108, 140, 144Kelheim Fibres 187Kiian Group 43, 141, 142Kraig Biocraft Laboratories 202KSL Keilmann Sondermaschinenbau 1, 71Kuraray Europe 142Kusters Calico Machinery 143Kusters Zima 143Kyocera Fineceramics 46Lanxess 60, 187, 192Laroche 107Lectra 16, 18, 21, 68, 70, 138, 145, 196
Lenzing 5, 6, 12, 60, 64, 132, 134, 190, 192, 198
Lenzing Instruments 110, 125Liba Maschinenfabrik 19Lindauer Dornier 191Linz Textil 198Loris Bellini 106Low & Bonar 70Luckytex 21Luna Innovation 14M. Dohmen 142Master 166Matesa Tekstil 144MCS Group 111Memminger-IRO 198Mesdan 112Milliken 140Miroglio Textile 46Mitsubishi Rayon 6Monforts 18, 19, 20, 21, 70, 71,
96, 102, 110, 144, 197Monforts Fong’s 70, 102Montalvo 10MS Printing Solutions 46Multifabs 145Murata Machinery 111NatureWorks 187Neuenhauser 114Newport Sensors 194Nexia Biotechnology 201Nextrusion 60, 187Nike 18Nilit 60Nishat Mills 20, 144Novibra Boskovice 116, 164Novozymes 195NSC fiber to yarn 108Nylstar 134Obem 114Oeko-Tex 16Oerlikon 12, 18Oerlikon Barmag 20, 70, 114, 200, 223Oerlikon Manmade Fibers 70, 71, 114,
143, 192, 196Oerlikon Neumag 70, 99, 114Orafol Europe 167Owens Corning 67Pattern Design 19PCI Fibres 6, 61, 187, 230PE International 187Perachem 94Perlon Nextrusion Monofil 187Perlon-Monofil 60, 187Petit & Cie. 111Philips 10PHP Fibers 10Picanol 71, 109, 138,
145, 196, 197Pinter 32Pitt 167Ploucquet 10Power-Heat-Set 223, 224Premium Textile Components 116Priyadarshini Sahakari Soot Girni 152Prosperity Knitwear 193Quick-Med Technologies 67Raymond 5Real Knitting 8Reggiani Macchine 126Retech 113
Richard Hough 21, 158Rieter 14, 18, 25, 72, 77, 78, 115, 129,
142, 144, 158, 161, 194, 210, 215, 227ROJ 109Rossari Labtech Venture 171Rotocraft 79Rowasol 223Saertex 41, 193Sahm 112Salmoiraghi 119Sanitized 16, 67Santex Group 123, 138Sapphire Finishing Mills 19Sateri 5, 60Saurer 118, 144Saurer Allma 118Saurer Jintan 118Saurer Schlafhorst 21, 69, 118, 144,
145, 157, 162, 194, 197, 198, 214Saurer Volkmann 118Savio 119Schappe Group 140Schoeller Technologies 67Schönherr Textilmaschinenbau 120Sensient Technology 46Serafin 60SGL Carbon 5, 133Shima Seiki 117Shrivallabh Pittie Group 10Sider Arc 148Skytex Mexico 20Sohler-Neuenhauser 114Solidian 198Solvay Rhodia Fibras Brazil 134Sonobond Ultrasonic 20SperottoRimar 123SPGPrints 19Spindelfabrik Suessen 116SR Webatex 136SSM Giudici 120, 197, 200SSM Schärer Schweiter Mettler 62, 120,
197, 200Starlinger 220Stäubli 72, 120Stoll 66Strumpfwerk Lindner 76Superba 122Sympatex Technologies 8Tamicare 47Tanatex Chemicals 14, 48, 195Tecnon OrbiChem 60Teijin 66TenCate 62, 67, 193, 194Tenowo 66Terrot 121Textechno Herbert Stein 125Textiles Intelligence 67Thai Acrylic Fibre 133Then 102Then Maschinen 47Thermore 68Thies 121, 170Tirotex 214TJ Beall 43TMT 200Tonello 144Topas 176Toray Industries 12Toyota Tsusho 141Trevira 5, 190
Company Index Page Page Page
-
8 Melliand International 2014
Index 2014
Triumph International 198Trützschler 19, 122, 136Trützschler Card Clothing 122Trützschler Man-Made Fibers 122Trützschler Nonwovens 122Trützschler Switzerland 19, 99Tsudakoma 124T-Tech Japan 124UltraTech International 14
Uster Technologies 18, 27, 62, 72, 125, 180, 198
Vald. Henriksen 132Van de Wiele 126Verdol 34, 126Verseidag-Indutex 167Wacker 12Wacker Metroark Chemicals 12Weibo 140
Westex 140Whaleys 94Willy Italiana 127Woolmark 5Xentrys 224Xetma Vollenweider 117Xorella 102J. Zimmer Maschinenbau 20Zouping Tongda Textile 144
Company Index Page Page Page
Issue Main Topics Conferences/Trade Shows
1 March New fiber developments Inlegmash 2015Publication date: Global cotton markets March 14-17, 2015 in Moscow/RussiaMarch 27, 2015 Textured yarns Usetec 2015
Spinning technologies April 8-11, 2015 in Geneva/SwitzerlandWeaving technologies 2nd Intl. Conference on Natural Fibers ICNFTextile floorcoverings April 27-29, 2015 in Sao Miguel/PortugalKnitting technologies Techtexti l 2015Dyeing, printing, finishing May 4-7, 2015 in Frankfurt/GermanyTechnical textiles (Techtextil 2015 preview) Texprocess 2015Making-up (Texprocess 2015 preview) May 4-7, 2015 in Frankfurt/GermanyCurrent market trends
2 July New fiber developments 54th Man-Made Fibers Congress DornbirnPublication date: Techtextil 2015: report September 16-18, 2015 in Dornbirn/AustriaJuly 6, 2015 Spinning technologies / Weaving technologies
Knitting technologies / Carpet technologiesDyeing, printing, finishingTechnical textiles and nonwovensTexprocess 2015: reportCurrent market trends
3 October New fiber developments A+A 2015Publication date: ITMA 2015: preview on new machinery for October 27-30, 2015 in Düsseldorf/GermanyOctober 27, 2015 fiber production, spinning, weaving, knitting ITMA 2015
textile finishing, technical textiles and November 12-19, 2015 in Milan/Italynonwovens production 9th Aachen-Dresden Intl. Texti le ConferenceSpinning technology / Weaving technology November 26/27, 2015 in Aachen/GermanyKnitting technology / Dyeing, printing, finishingGlobal textile machinery tradeMaking-up / Current market trends
4 December Global fiber markets Heimtexti l 2016Publication date: New fiber developments January 12-15, 2016 in Frankfurt/GermanyDecember 15, 2015 Spinning technologies / Weaving technologies Domotex 2016
News in dyeing, printing, finishing January 16-19, 2016 in Hanover/GermanyWorld market trends for false-twist texturingmachines, spinning, weaving as well asknitting machines (ITMF)Nonwovens / Technical textilesCurrent market trends
Editorial Program 2015