indanthren black g suprafix_en

Vat printing Creation date: 13.10.2010 Indanthren ® Black G Suprafix Short profile: neutral standard black. standarisation in grey also. 1/1 1/3 Flat-bed printing on cotton, merc. Full shade/reduction 1/3 The fastness properties were tested in 1/1 standard depth (Lightfastness was tested additional on indicated standard depths) Suitability Process Articles All-in (Rongalit C / potash) suitable Discharge printing suitable Two-phase-process suitable Camouflage printing suitable Upholstery, curtains suitable Fastness properties Light fastness (Xenon arc) ISO 105-B02 1/24 SD 1/12 SD 1/6 SD 1/3 SD 1/1 SD 2/1 SD 3-4 4 4 4-5 5-6 7 F CO CV Washing fastness 95 °C, process 4 ISO 105-C04 4-5 3 3-4 Peroxide washing 95 °C DIN 54015 4-5 3 3-4 Hypochlorite bleaching, severe ISO 105-N01 3-4R Dry-cleaning (perchloroethylene) ISO 105-D01 4-5R Warranty Information This information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to check its validity and to test our products as to their suitability for the intended processes and uses. The application, use and processing of our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility. Our products are sold in accordance with our General Conditions of Sale and Delivery. All data in the pattern card refer to the respective dye in 100% strength. All fastness properties of the product were tested only as single product on standard materials and not in combinations/blends. Indanthren® Black G Supraﬁx https://www1.dystar.com/ebusiness/datasheet.cfm?CFID=34... 1 van 2 13/10/10 08:56

Upload: maghfoor-ahmed-mughal

Post on 10-Mar-2015

26 views

Category:

Documents

1 download

Report

Download

Embed Size (px):

TRANSCRIPT

Vat printing

Creation date: 13.10.2010

Indanthren® Black G Suprafix

Short profile:neutral standard black. standarisation in grey also.

1/1 1/3

Flat-bed printingon cotton, merc.Full shade/reduction 1/3

The fastness properties were tested in 1/1 standard depth

(Lightfastness was tested additional on indicated standard depths)

Suitability

Process ArticlesAll-in (Rongalit C / potash) suitable Discharge printing suitable

Two-phase-process suitable Camouflage printing suitable

Upholstery, curtains suitable

Fastness properties

Light fastness (Xenon arc) ISO 105-B021/24 SD 1/12 SD 1/6 SD 1/3 SD 1/1 SD 2/1 SD

3-4 4 4 4-5 5-6 7 F CO CV

Washing fastness 95 °C, process 4 ISO 105-C04 4-5 3 3-4

Peroxide washing 95 °C DIN 54015 4-5 3 3-4

Hypochlorite bleaching, severe ISO 105-N01 3-4R

Dry-cleaning (perchloroethylene) ISO 105-D01 4-5R

Warranty InformationThis information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but without warranty, and

this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to check itsvalidity and to test our products as to their suitability for the intended processes and uses. The application, use and processing of our

products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your ownresponsibility. Our products are sold in accordance with our General Conditions of Sale and Delivery.

All data in the pattern card refer to the respective dye in 100% strength.

All fastness properties of the product were tested only as single product on standard materials and not in combinations/blends.

Indanthren® Black G Suprafix https://www1.dystar.com/ebusiness/datasheet.cfm?CFID=34...

1 van 2 13/10/10 08:56