imaginative fluoropolymer...
TRANSCRIPT
www.dyneon.com
Dyneon is a 3M company
Printed in USA. 98-0504-1480-8
Issued: 11/04. All rights reserved.
Dyneon, Dynamar, TFM and THVare trademarks of 3M. Used under license.
© Dyneon 2004
Imaginative fluoropolymersolutions
Dyneon Customer ServiceEurope Phone: 00 800 396 366 27
Fax: 00 800 396 366 39
Italy Phone: 00 800 7 910 18Fax: 00 800 7 910 19
USA Phone: +1 800 810 8499Fax: +1 800 635 8061
Dyneon LLC6744 33rd Street NorthOakdale, MN 55128United StatesToll Free:+1 800 723 9127Phone: +1 651 733 5353Fax: +1 651 737 7686
Dyneon GmbH & Co. KGWerk GendorfD-84504 BurgkirchenGermanyPhone: +49 8679 7 4709Fax: +49 8679 3992
Dyneon GmbH & Co. KGCarl-Schurz-Strasse 1D-41453 NeussGermanyPhone: +49 2131 14 2265Fax: +49 2131 14 3857
Dyneon N.V.Canadastraat 11, Haven 1005B-2070 ZwijndrechtBelgiumPhone: +32 3 250 7537Fax: +32 3 250 7905
3M CentreCain Rd.Bracknell, Berkshire RG128HTUnited KingdomPhone: +44 13 44 429675Fax: +44 13 44 427904
Dyneon GmbH & Co. KGSuccursale FranceBlouvard de l'Oise, Tour 3MF-95006 Cergy Pontoise Cedex, FrancePhone: +33 1 3031 6611Fax: +33 1 3031 6613
Dyneon GmbH & Co. KGSede Secondaria ItaliaVia San Bovio, 3Milano San FeliceI-20090 Segrate (MI)ItalyPhone: +39 02 7035 3206-7Fax: +39 02 7035 3208
Sumitomo 3M Limited33-1 Tamagawadai 2-chomeSetagaya-ku, Tokyo158 JapanPhone: +81 3 3709 8111Fax: +81 3 3709 8743
3M China Limited10/F, New Town Mansion55 Loushanguan RoadShanghai 200335P.R.ChinaPhone: +86 21 6275 3535Fax: +86 21 6219 0698
3M BrazilVia Anahnguera, km 110Sumaré, São Paulo (SP)CEP: 13181-900BrazilPhone: +55 19 3838 6768Fax: +55 19 3838 7828
3M Canada1840 Oxford St. E.London, Ontario N5V 3R6CanadaPhone: + 800 265 1840Fax: + 800 479 4453:
3M Korea22 Fl Dhit B/D 27-3Yoido-Dong, Youngdungpo-Ku, SeoulKoreaPhone: + 82 2 3771 4102Fax: + 82 2 780 3650
At Dyneon, our goal is to provide you withdesign solutions to make your job easier– helping you with material selection nowso that you can avoid problems later.
Whatever your challenge, you can counton Dyneon to respond with dependable,high-performance fluoropolymer products.By working directly with our customersand exploring new technologies, you canbe sure that our fluoropolymers will notonly meet today’s needs, but futuredesign requirements as well.
Our worldwide commitmentto quality
Indicative of our commitment, mostDyneon design, development, productionand service facilities have achieved aglobal ISO 9001 quality managementcertification. One of our Decatur, Alabamasites and all Germany locations, as wellas the production facilities at Antwerp,Belgium have also received ISO 14001certification for their environmentalmanagement system. And, our Aston,Pennsylvania PTFE custom compoundingfacility has A2LA accreditation for itsquality control laboratory.
IMPORTANT NOTICE
Because conditions of product use are outside Dyneon’s control and vary widely, user must evaluate and determine whether a Dyneon productwill be suitable for user’s intended application before using it. The following is made in lieu of all express and implied warranties (includingwarranties of merchantability and fitness for a particular purpose): If a Dyneon product is proved to be defective, Dyneon’s onlyobligation, and user’s only remedy, will be, at Dyneon’s option, to replace the quantity of product shown to be defective when userreceived it or to refund user’s purchase price. In no event will Dyneon be liable for any direct, indirect, special, incidental, or consequential loss or damage, regardless of legal theory, such as breach of warranty or contract, negligence, or strict liability.
Technical information, test data, and advice provided by Dyneon personnel are based on information and tests we believe are reliable and areintended for persons with knowledge and technical skills sufficient to analyze test types and conditions, and to handle and use raw polymers and related compounding ingredients. No license under any Dyneon or third party intellectual rights is granted or implied by virtue of this information.
The Dyneon Product Portfolio:
Dyneon™PTFE, TFM™ PTFE, Custom PTFE Compounds
Dyneon™PFA, FEP, ETFE, HTE, THV™ FP, PVDF Fluoroplastics
Dyneon™Fluoroelastomers
Dyneon™Polymer Additives
Dynamar™Polymer Processing Additives
Dynamar™Elastomer Additives
Dyneon™Monomers
Dyneon™ PolymerAdditivesProduct Comparison Guide
Dyneon, one of the world’s leadingsuppliers of fluoropolymers, offers two families of polymer additives. Inmicropowder form, Dyneon™ PolymerAdditives dramatically improve mar resistance. In granular form, DyneonPolymer Additives offer enhanced anti-drip properties. These polymer additivesimprove performance in critical applica-tions for industries including automotive,wire and cable and building materials.
Wear Resistance
Dyneon Polymer Additives offerimproved mar resistance, a reducedcoefficient of friction and improvednon-stick properties when incorporatedinto resins for injection molded parts.They are typically added to thermoplasticand engineering resins used in theproduction of plastic parts such asbearings, joints and guides that aresubjected to sliding friction. Polymeradditives also increase chemical andtemperature resistance as well aswear and scuff resistance.
Dyneon™ PolymerAdditives ImproveWear Resistance In:
POM (Polyacetal)
Polyamide 6
Polyamide 6,6
Polycarbonate
PBT (Polyester)
PPS (Polyphenylene Sulfide)
PU (Polyurethane)
PE (Polyethylene)
PP (Polypropylene)
Benefits:
• Friction reduction• Wear resistance• Tear resistance• Scuff resistance • Viscosity increase• Non-stick properties
www.dyneon.comwww.dyneon.com
Dyneon™ Polymer Additives
Clearance (K) and Weight Loss (J) Wear Factorsfor Polyacetal (POM M90) with IncreasingAnti-wear Dyneon™ PA Additive Loading
We
ar
Fa
cto
rM
ag
nit
ud
e
350
300
250
200
150
100
50
0Control (no PA) 5% PA 5951 10% PA 5951 15% PA 5951 20% PA 5951
Additive Loading - Wt%
Properties Unit Test method PA 5931 PA 5932 PA 5933 PA 5958 PA 5959
Average particle size µm Laser Diffraction 500 500 500 0.2 0.2
Bulk density g/l ASTM D 4895 510 510 510 - -
Solids Content % ISO 12086 - - - 60 58
Drip Resistance
Polymer additives intended for anti-dripbenefits are particularly useful in wire andcable and building material applications. Ingranular form, when added to thermoplasticresins, polymer additives utilize fibrillationto significantly improve anti-drip properties,melt strength and sag resistance in appli-cations like wire and cable insulation andjacketing, tubes, hoses, pipe liners andhousings. These anti-drip characteristicscan help retard flame propagation shouldthe end-use part be exposed to extremelyhigh temperatures. They are classifiedunder UL94 V-0.
Dyneon™ Polymer Additives ImproveDrip Resistance In:
Polycarbonate
PP (Polypropylene)
Polyamide
Polystyrene
PBT (Polyester)
Benefits of Dyneon™ PA5931, Dyneon™ PA 5932 andDyneon™ PA 5933:
• High molecular weight granular fluo-ropolymers with the capacity to fibrillateduring melt blending processes
• Testing shows reduced drip and propa-gation of flame (UL94 V-0 qualification)
• Added melt strength, sag resistanceand viscosity during processing
• Increased die swelling
Benefits of Dyneon™ PA 5958and Dyneon™ PA 5959:
• High molecular weight fluoropolymerdispersions with the capacity to fibrillateduring melt blending processes
• Highly concentrated, fluoropolymerlattices allowing wet blending withother polymer dispersions prior to coagulation
Properties Unit Test method PA 5951 PA 5952 PA 5953
Average particle size µm Laser Diffraction 6 15 8Bulk density g/l ASTM D 4895 350 450 400Specific surface m2/g DIN 66131 10 2 2area BET DIN 66132
Dyneon™ Polymer AdditivesAnti-drip Testing on 125 Mil (3mm) bars
Unit Sample Number
1 2 3 4 5 6 7 8GE PC Low Visc wt% 100 95.8 95 94 94 95 99 98Saytex™ BT-93™ (Br-FR) wt% 4 4 4 4 4Dyneon™ PA 5933 wt% 0.2 1 2 1 2Dyneon™ PA 5931 wt% 2Dyneon™ PA 5934 wt% 1Flammability Rating (UL94) V-2 V-0 V-0 V-0 V-0 V-0 V-1 V-1
• K Factor (Clearance)
• J Factor (Weight Loss)Vertical Burn
Dyneon, one of the world’s leadingsuppliers of fluoropolymers, offers two families of polymer additives. Inmicropowder form, Dyneon™ PolymerAdditives dramatically improve mar resistance. In granular form, DyneonPolymer Additives offer enhanced anti-drip properties. These polymer additivesimprove performance in critical applica-tions for industries including automotive,wire and cable and building materials.
Wear Resistance
Dyneon Polymer Additives offerimproved mar resistance, a reducedcoefficient of friction and improvednon-stick properties when incorporatedinto resins for injection molded parts.They are typically added to thermoplasticand engineering resins used in theproduction of plastic parts such asbearings, joints and guides that aresubjected to sliding friction. Polymeradditives also increase chemical andtemperature resistance as well aswear and scuff resistance.
Dyneon™ PolymerAdditives ImproveWear Resistance In:
POM (Polyacetal)
Polyamide 6
Polyamide 6,6
Polycarbonate
PBT (Polyester)
PPS (Polyphenylene Sulfide)
PU (Polyurethane)
PE (Polyethylene)
PP (Polypropylene)
Benefits:
• Friction reduction• Wear resistance• Tear resistance• Scuff resistance • Viscosity increase• Non-stick properties
www.dyneon.comwww.dyneon.com
Dyneon™ Polymer Additives
Clearance (K) and Weight Loss (J) Wear Factorsfor Polyacetal (POM M90) with IncreasingAnti-wear Dyneon™ PA Additive Loading
We
ar
Fa
cto
rM
ag
nit
ud
e
350
300
250
200
150
100
50
0Control (no PA) 5% PA 5951 10% PA 5951 15% PA 5951 20% PA 5951
Additive Loading - Wt%
Properties Unit Test method PA 5931 PA 5932 PA 5933 PA 5958 PA 5959
Average particle size µm Laser Diffraction 500 500 500 0.2 0.2
Bulk density g/l ASTM D 4895 510 510 510 - -
Solids Content % ISO 12086 - - - 60 58
Drip Resistance
Polymer additives intended for anti-dripbenefits are particularly useful in wire andcable and building material applications. Ingranular form, when added to thermoplasticresins, polymer additives utilize fibrillationto significantly improve anti-drip properties,melt strength and sag resistance in appli-cations like wire and cable insulation andjacketing, tubes, hoses, pipe liners andhousings. These anti-drip characteristicscan help retard flame propagation shouldthe end-use part be exposed to extremelyhigh temperatures. They are classifiedunder UL94 V-0.
Dyneon™ Polymer Additives ImproveDrip Resistance In:
Polycarbonate
PP (Polypropylene)
Polyamide
Polystyrene
PBT (Polyester)
Benefits of Dyneon™ PA5931, Dyneon™ PA 5932 andDyneon™ PA 5933:
• High molecular weight granular fluo-ropolymers with the capacity to fibrillateduring melt blending processes
• Testing shows reduced drip and propa-gation of flame (UL94 V-0 qualification)
• Added melt strength, sag resistanceand viscosity during processing
• Increased die swelling
Benefits of Dyneon™ PA 5958and Dyneon™ PA 5959:
• High molecular weight fluoropolymerdispersions with the capacity to fibrillateduring melt blending processes
• Highly concentrated, fluoropolymerlattices allowing wet blending withother polymer dispersions prior to coagulation
Properties Unit Test method PA 5951 PA 5952 PA 5953
Average particle size µm Laser Diffraction 6 15 8Bulk density g/l ASTM D 4895 350 450 400Specific surface m2/g DIN 66131 10 2 2area BET DIN 66132
Dyneon™ Polymer AdditivesAnti-drip Testing on 125 Mil (3mm) bars
Unit Sample Number
1 2 3 4 5 6 7 8GE PC Low Visc wt% 100 95.8 95 94 94 95 99 98Saytex™ BT-93™ (Br-FR) wt% 4 4 4 4 4Dyneon™ PA 5933 wt% 0.2 1 2 1 2Dyneon™ PA 5931 wt% 2Dyneon™ PA 5934 wt% 1Flammability Rating (UL94) V-2 V-0 V-0 V-0 V-0 V-0 V-1 V-1
• K Factor (Clearance)
• J Factor (Weight Loss)Vertical Burn
www.dyneon.com
Dyneon is a 3M company
Printed in USA. 98-0504-1480-8
Issued: 11/04. All rights reserved.
Dyneon, Dynamar, TFM and THVare trademarks of 3M. Used under license.
© Dyneon 2004
Imaginative fluoropolymersolutions
Dyneon Customer ServiceEurope Phone: 00 800 396 366 27
Fax: 00 800 396 366 39
Italy Phone: 00 800 7 910 18Fax: 00 800 7 910 19
USA Phone: +1 800 810 8499Fax: +1 800 635 8061
Dyneon LLC6744 33rd Street NorthOakdale, MN 55128United StatesToll Free:+1 800 723 9127Phone: +1 651 733 5353Fax: +1 651 737 7686
Dyneon GmbH & Co. KGWerk GendorfD-84504 BurgkirchenGermanyPhone: +49 8679 7 4709Fax: +49 8679 3992
Dyneon GmbH & Co. KGCarl-Schurz-Strasse 1D-41453 NeussGermanyPhone: +49 2131 14 2265Fax: +49 2131 14 3857
Dyneon N.V.Canadastraat 11, Haven 1005B-2070 ZwijndrechtBelgiumPhone: +32 3 250 7537Fax: +32 3 250 7905
3M CentreCain Rd.Bracknell, Berkshire RG128HTUnited KingdomPhone: +44 13 44 429675Fax: +44 13 44 427904
Dyneon GmbH & Co. KGSuccursale FranceBlouvard de l'Oise, Tour 3MF-95006 Cergy Pontoise Cedex, FrancePhone: +33 1 3031 6611Fax: +33 1 3031 6613
Dyneon GmbH & Co. KGSede Secondaria ItaliaVia San Bovio, 3Milano San FeliceI-20090 Segrate (MI)ItalyPhone: +39 02 7035 3206-7Fax: +39 02 7035 3208
Sumitomo 3M Limited33-1 Tamagawadai 2-chomeSetagaya-ku, Tokyo158 JapanPhone: +81 3 3709 8111Fax: +81 3 3709 8743
3M China Limited10/F, New Town Mansion55 Loushanguan RoadShanghai 200335P.R.ChinaPhone: +86 21 6275 3535Fax: +86 21 6219 0698
3M BrazilVia Anahnguera, km 110Sumaré, São Paulo (SP)CEP: 13181-900BrazilPhone: +55 19 3838 6768Fax: +55 19 3838 7828
3M Canada1840 Oxford St. E.London, Ontario N5V 3R6CanadaPhone: + 800 265 1840Fax: + 800 479 4453:
3M Korea22 Fl Dhit B/D 27-3Yoido-Dong, Youngdungpo-Ku, SeoulKoreaPhone: + 82 2 3771 4102Fax: + 82 2 780 3650
At Dyneon, our goal is to provide you withdesign solutions to make your job easier– helping you with material selection nowso that you can avoid problems later.
Whatever your challenge, you can counton Dyneon to respond with dependable,high-performance fluoropolymer products.By working directly with our customersand exploring new technologies, you canbe sure that our fluoropolymers will notonly meet today’s needs, but futuredesign requirements as well.
Our worldwide commitmentto quality
Indicative of our commitment, mostDyneon design, development, productionand service facilities have achieved aglobal ISO 9001 quality managementcertification. One of our Decatur, Alabamasites and all Germany locations, as wellas the production facilities at Antwerp,Belgium have also received ISO 14001certification for their environmentalmanagement system. And, our Aston,Pennsylvania PTFE custom compoundingfacility has A2LA accreditation for itsquality control laboratory.
IMPORTANT NOTICE
Because conditions of product use are outside Dyneon’s control and vary widely, user must evaluate and determine whether a Dyneon productwill be suitable for user’s intended application before using it. The following is made in lieu of all express and implied warranties (includingwarranties of merchantability and fitness for a particular purpose): If a Dyneon product is proved to be defective, Dyneon’s onlyobligation, and user’s only remedy, will be, at Dyneon’s option, to replace the quantity of product shown to be defective when userreceived it or to refund user’s purchase price. In no event will Dyneon be liable for any direct, indirect, special, incidental, or consequential loss or damage, regardless of legal theory, such as breach of warranty or contract, negligence, or strict liability.
Technical information, test data, and advice provided by Dyneon personnel are based on information and tests we believe are reliable and areintended for persons with knowledge and technical skills sufficient to analyze test types and conditions, and to handle and use raw polymers and related compounding ingredients. No license under any Dyneon or third party intellectual rights is granted or implied by virtue of this information.
The Dyneon Product Portfolio:
Dyneon™PTFE, TFM™ PTFE, Custom PTFE Compounds
Dyneon™PFA, FEP, ETFE, HTE, THV™ FP, PVDF Fluoroplastics
Dyneon™Fluoroelastomers
Dyneon™Polymer Additives
Dynamar™Polymer Processing Additives
Dynamar™Elastomer Additives
Dyneon™Monomers
Dyneon™ PolymerAdditivesProduct Comparison Guide